The Influence of Nonionic Surfactant Adsorption on Enzymatic Hydrolysis of Oil Palm Fruit Bunch

Hydrolysis of lignocellulose to succinic acid: a review of treatment methods and succinic acid applications

Succinic acid (SA) is an intermediate product of the tricarboxylic acid cycle (TCA) and is one of the most significant platform chemicals for the production of various derivatives with high added value. Due to the depletion of fossil raw materials and the demand for eco-friendly energy sources, SA biosynthesis from renewable energy sources is gaining attention for its environmental friendliness. This review comprehensively analyzes strategies for the bioconversion of lignocellulose to SA based on the lignocellulose pretreatment processes and cellulose hydrolysis and fermentation principles and highlights the research progress on acid production and SA utilization under different microbial culture conditions. In addition, the fermentation efficiency of different microbial strains for the production of SA and the main challenges were analyzed. The future application directions of SA derivatives were pointed out. It is expected that this research will provide a reference for the optimization of SA production from lignocellulose.

Effect of Surfactant HLB Value on Enzymatic Hydrolysis of Chitosan

Nonionic surfactants are reported as being able to enhance enzyme stability and increase the conversion of enzymatic reactions. Surfactant-assisted enzymatic hydrolysis conversion is affected by surfactant HLB values. This work investigated the influence of nonionic surfactants with different HLB values on chitosan enzymatic hydrolysis using cellulase enzyme by measuring the reducing sugars formation, viscosity, and molecular weight of hydrolyzed chitosan. A characterization analysis of hydrolyzed products was also carried out. A higher HLB value exhibits a better enzymatic chitosan hydrolysis performance, shown by the decrease in a solution’s viscosity and the increase in reducing sugar formation. Increasing the surfactant concentration will also increase the hydrolysis rate. Nonionic surfactants can protect cellulase enzyme from the denaturation of temperature and stirring influence. The higher the HLB value, the lower the molecular weight of the hydrolyzed chitosan. The result of UV–Vis demonstrated aldehyde groups formation during hydrolysis. The SEM analysis showed that the chitosan, hydrolyzed using different HLB values of surfactants, had different surface morphologies. However, it did not change the chemical structure of the hydrolysis product seen by the FTIR analysis. The XRD patterns showed that the relative crystallinity of raw chitosan decreased when hydrolyzed with surfactants.

Interplays of enzyme, substrate, and surfactant on hydrolysis of native lignocellulosic biomass

Tracking enzyme, substrate, and surfactant interactions to reach maximum reducing sugar production during enzymatic hydrolysis of plant biomass may provide a better understanding of factors that limit the lignocellulosic material degradation in native rice straw. In this study, enzymes (Cellic Ctec2 cellulase and Cellic Htec2 xylanase) and Triton X-100 (surfactant) were used as biocatalysts for cellulose and xylan degradation and as a lignin blocking agent, respectively. The response surface model (R² = 0.99 and R²-adj = 0.97) indicated that Cellic Ctec2 cellulase (p < 0.0001) had significant impacts on reducing sugar production, whereas Cellic Htec2 xylanase and Triton X-100 had insignificant impacts on sugar yield. Although FTIR analysis suggested binding of Triton X-100 to lignin surfaces, the morphological observation by SEM revealed similar surface features (i.e., smooth surfaces with some pores) of rice straw irrespective of Triton X-100. The reducing sugar yields from substrate hydrolysis with or without the surfactant were comparable, suggesting similar exposure of polysaccharides accessible to the enzymes. The model analysis and chemical and structural evidence suggest that there would be no positive effects on enzymatic hydrolysis by blocking lignins with Triton X-100 if high lignin coverage exists in the substrate due to the limited availability of hydrolyzable polysaccharides.

Hot Compressed Water Pretreatment and Surfactant Effect on Enzymatic Hydrolysis Using Agave Bagasse

Agave bagasse is a residual biomass in the production of the alcoholic beverage tequila, and therefore, it is a promising raw material in the development of biorefineries using hot compressed water pretreatment (hydrothermal processing). Surfactants application has been frequently reported as an alternative to enhance monomeric sugars production efficiency and as a possibility to reduce the enzyme loading required. Nevertheless, the surfactant’s action mechanisms in the enzymatic hydrolysis is still not elucidated. In this work, hot compressed water pretreatment was applied on agave bagasse for biomass fractionation at 194 °C in isothermal regime for 30 min, and the effect of non-ionic surfactants (Tween 20, Tween 80, Span 80, and Polyethylene glycol (PEG 400)) was studied as a potential enhancer of enzymatic saccharification of hydrothermally pretreated solids of agave bagasse (AGB). It was found that non-ionic surfactants show an improvement in the conversion yield of cellulose to glucose (100%) and production of glucose (79.76 g/L) at 15 FPU/g glucan, the highest enhancement obtained being 7% regarding the control (no surfactant addition), using PEG 400 as an additive. The use of surfactants allows improving the production of fermentable sugars for the development of second-generation biorefineries.

Enhancing Lignin Dissolution and Extraction: The Effect of Surfactants

The dissolution and extraction of lignin from biomass represents a great challenge due to the complex structure of this natural phenolic biopolymer. In this work, several surfactants (i.e., non-ionic, anionic, and cationic) were used as additives to enhance the dissolution efficiency of model lignin (kraft) and to boost lignin extraction from pine sawdust residues. To the best of our knowledge, cationic surfactants have never been systematically used for lignin dissolution. It was found that ca. 20 wt.% of kraft lignin is completely solubilized using 1 mol L-1 octyltrimethylammonium bromide aqueous solution. A remarkable dissolution efficiency was also obtained using 0.5 mol L-1 polysorbate 20. Furthermore, all surfactants used increased the lignin extraction with formic acid, even at low concentrations, such as 0.01 and 0.1 mol L-1. Higher concentrations of cationic surfactants improve the extraction yield but the purity of extracted lignin decreases.

Insight on adsorption of cellulase on wet ground corncob residues and its evaluation by multivariate linear analysis

Understanding the adsorption behavior and the interaction between substrates and enzymes are critical to improving enzymatic hydrolysis efficiency and reducing bioconversion cost. Herein, the adsorption of cellulase on wet ground corncob residues was studied, and the effects of main characteristics of wet ground corncob residues on adsorption capacity were quantitatively analyzed with the combination of principal component analysis and multiple linear regression models. The results showed that the adsorption of cellulase on wet ground corncob residues was fitted well with Langmuir isotherm adsorption and pseudo second-order kinetics model, the adsorption rate and adsorption capacity were greatly enhanced with increasing grinding time; the multiple linear regression models describing the relationship between main characteristics of corncob residues and adsorption capacity to cellulase were established; the significance of these characteristics were in the following order: average particle size, crystallinity index, specific surface area, surface lignin concentration, water retention value, and surface charge density.

Enhancement and Mechanism of a Lignin Amphoteric Surfactant on the Production of Cellulosic Ethanol from a High-Solid Corncob Residue

A lignin amphoteric surfactant and betaine could enhance the enzymatic hydrolysis of lignocellulose and recover cellulase. The effects of lignosulfonate quaternary ammonium salt (SLQA) and dodecyl dimethyl betaine (BS12) on enzymatic hydrolysis digestibility, ethanol yield, yeast cell viability, and other properties of high-solid enzymatic hydrolysis and fermentation of a corncob residue were studied in this research. The results suggested that SLQA and 1 g/L BS12 effectively improved the ethanol yield through enhancing enzymatic hydrolysis. SLQA had no significant effect on the yeast cell membrane and glucose fermentation. However, 5 g/L BS12 reduced the ethanol yield as a result of the fact that 5 g/L BS12 damaged the yeast cell membrane and inhibited the conversion of glucose to ethanol. Our research also suggested that 1 g/L BS12 enhanced the ethanol yield of corncob residue fermentation, which was attributed to the fact that lignin in the corncob adsorbed BS12 and decreased its concentration in solution to a safe level for the yeast.