Angioneural crosstalk in scaffolds with oriented microchannels for regenerative spinal cord injury repair

Comparative analysis of aligned and random amniotic membrane-derived cryogels for neural tissue repair

The ordered arrangement of cells and extracellular matrix facilitates the seamless transmission of electrical signals along axons in the spinal cord and peripheral nerves. Therefore, restoring tissue geometry is crucial for neural regeneration. This study presents a novel method using proteins derived from the human amniotic membrane, which is modified with photoresponsive groups, to produce cryogels with aligned porosity. Freeze-casting was used to produce cryogels with longitudinally aligned pores, while cryogels with randomly distributed porosity were used as the control. The cryogels exhibited remarkable injectability and shape-recovery properties, essential for minimally invasive applications. Different tendencies in proliferation and differentiation were evident between aligned and random cryogels, underscoring the significance of the scaffold's microstructure in directing the behaviour of neural stem cells (NSC). Remarkably, aligned cryogels facilitated extensive cellular infiltration and migration, contrasting with NSC cultured on isotropic cryogels, which predominantly remained on the scaffold's surface throughout the proliferation experiment. Significantly, the proliferation assay demonstrated that on day 7, the aligned cryogels contained eight times more cells compared to the random cryogels. Consistent with the proliferation experiments, NSC exhibited the ability to differentiate into neurons within the aligned scaffolds and extend neurites longitudinally. In addition, differentiation assays showed a four-fold increase in the expression of neural markers in the cross-sections of the aligned cryogels. Conversely, the random cryogels exhibited minimal presence of cell bodies and extensions. The presence of synaptic vesicles on the anisotropic cryogels indicates the formation of functional synaptic connections, emphasizing the importance of the scaffold's microstructure in guiding neuronal reconnection.

Human Cell-Derived Matrix Composite Hydrogels with Diverse Composition for Use in Vasculature-on-chip Models

Microphysiological and organ-on-chip platforms seek to address critical gaps in human disease models and drug development that underlie poor rates of clinical success for novel interventions. While the fabrication technology and model cells used to synthesize organs-on-chip have advanced considerably, most platforms rely on animal-derived or synthetic extracellular matrix as a cell substrate, limiting mimicry of human physiology and precluding use in modeling diseases in which matrix dynamics play a role in pathogenesis. Here, the development of human cell-derived matrix (hCDM) composite hydrogels for use in 3D microphysiologic models of the vasculature is reported. hCDM composite hydrogels are derived from human donor fibroblasts and maintain a complex milieu of basement membrane, proteoglycans, and nonfibrillar matrix components. The use of hCDM composite hydrogels as 2D and 3D cell culture substrates is demonstrated, and hCDM composite hydrogels are patterned to form engineered human microvessels. Interestingly, hCDM composite hydrogels are enriched in proteins associated with vascular morphogenesis as determined by mass spectrometry, and functional analysis demonstrates proangiogenic signatures in human endothelial cells cultured in these hydrogels. In conclusion, this study suggests that human donor-derived hCDM composite hydrogels could address technical gaps in human organs-on-chip development and serve as substrates to promote vascularization.

Beyond the limiting gap length: peripheral nerve regeneration through implantable nerve guidance conduits

Peripheral nerve damage results in the loss of sensorimotor and autonomic functions, which is a significant burden to patients. Furthermore, nerve injuries greater than the limiting gap length require surgical repair. Although autografts are the preferred clinical choice, their usage is impeded by their limited availability, dimensional mismatch, and the sacrifice of another functional donor nerve. Accordingly, nerve guidance conduits, which are tubular scaffolds engineered to provide a biomimetic environment for nerve regeneration, have emerged as alternatives to autografts. Consequently, a few nerve guidance conduits have received clinical approval for the repair of short-mid nerve gaps but failed to regenerate limiting gap damage, which represents the bottleneck of this technology. Thus, it is still necessary to optimize the morphology and constituent materials of conduits. This review summarizes the recent advances in nerve conduit technology. Several manufacturing techniques and conduit designs are discussed, with emphasis on the structural improvement of simple hollow tubes, additive manufacturing techniques, and decellularized grafts. The main objective of this review is to provide a critical overview of nerve guidance conduit technology to support regeneration in long nerve defects, promote future developments, and speed up its clinical translation as a reliable alternative to autografts.

Anisotropic 3D scaffolds for spinal cord guided repair: Current concepts

A spinal cord injury (SCI) can be caused by unforeseen events such as a fall, a vehicle accident, a gunshot, or a malignant illness, which has a significant impact on the quality of life of the patient. Due to the limited regenerative potential of the central nervous system (CNS), SCI is one of the most daunting medical challenges of modern medicine. Great advances have been made in tissue engineering and regenerative medicine, which include the transition from two-dimensional (2D) to three-dimensional (3D) biomaterials. Combinatory treatments that use 3D scaffolds may significantly enhance the repair and regeneration of functional neural tissue. In an effort to mimic the chemical and physical properties of neural tissue, scientists are researching the development of the ideal scaffold made of synthetic and/or natural polymers. Moreover, in order to restore the architecture and function of neural networks, 3D scaffolds with anisotropic properties that replicate the native longitudinal orientation of spinal cord nerve fibres are being designed. In an effort to determine if scaffold anisotropy is a crucial property for neural tissue regeneration, this review focuses on the most current technological developments relevant to anisotropic scaffolds for SCI. Special consideration is given to the architectural characteristics of scaffolds containing axially oriented fibres, channels, and pores. By analysing neural cell behaviour in vitro and tissue integration and functional recovery in animal models of SCI, the therapeutic efficacy is evaluated for its successes and limitations.

Smart biomaterials and their potential applications in tissue engineering

Smart biomaterials have been rapidly advancing ever since the concept of tissue engineering was proposed. Interacting with human cells, smart biomaterials can play a key role in novel tissue morphogenesis. Various aspects of biomaterials utilized in or being sought for the goal of encouraging bone regeneration, skin graft engineering, and nerve conduits are discussed in this review. Beginning with bone, this study summarizes all the available bioceramics and materials along with their properties used singly or in conjunction with each other to create scaffolds for bone tissue engineering. A quick overview of the skin-based nanocomposite biomaterials possessing antibacterial properties for wound healing is outlined along with skin regeneration therapies using infrared radiation, electrospinning, and piezoelectricity, which aid in wound healing. Furthermore, a brief overview of bioengineered artificial skin grafts made of various natural and synthetic polymers has been presented. Finally, by examining the interactions between natural and synthetic-based biomaterials and the biological environment, their strengths and drawbacks for constructing peripheral nerve conduits are highlighted. The description of the preclinical outcome of nerve regeneration in injury healed with various natural-based conduits receives special attention. The organic and synthetic worlds collide at the interface of nanomaterials and biological systems, producing a new scientific field including nanomaterial design for tissue engineering.

Functional hydrogels as therapeutic tools for spinal cord injury: New perspectives on immunopharmacological interventions

Spinal cord injury (SCI) is a complex medical and psychological challenge for which there is no curative therapy currently available. Despite major progress in pharmacological and surgical approaches, clinical trials for SCI patients have been uniformly disappointing thus far as there are many practical and biological issues yet to be resolved. Neuroinflammation is a critical event of the secondary injury phase after SCI, and recent research strategies have focused on modulating the immune response after injury to provide a more favorable recovery environment. Biomaterials can serve this purpose by providing physical and trophic support to the injured spinal cord after SCI. Of all potential biomaterials, functional hydrogels are emerging as a key component in novel treatment strategies for SCI, including controlled and localized delivery of immunomodulatory therapies to drive polarization of immune cells towards a pro-regenerative phenotype. Here, we extensively review recent developments in the use of functional hydrogels as immunomodulatory therapies for SCI. We briefly describe physicochemical properties of hydrogels and demonstrate how advanced fabrication methods lead to the required heterogeneity and hierarchical arrangements that increasingly mimic complex spinal cord tissue. We then summarize potential SCI therapeutic modalities including: (i) hydrogels alone; (ii) hydrogels as cellular or (iii) bioactive molecule delivery vehicles, and; (iv) combinatorial approaches. By linking the structural properties of hydrogels to their functions in treatment with particular focus on immunopharmacological stimuli, this may accelerate further development of functional hydrogels for SCI, and indeed next-generation central nervous system regenerative therapies.

Mesenchymal Stem Cell-Laden Hydrogel Microfibers for Promoting Nerve Fiber Regeneration in Long-Distance Spinal Cord Transection Injury

Mesenchymal stem cell (MSC)-based regenerative medicine is widely considered as a promising approach for repairing tissue and re-establishing function in spinal cord injury (SCI). However, low survival rate, uncontrollable migration, and differentiation of stem cells after implantation represent major challenges toward the clinical deployment of this approach. In this study, we fabricated three-dimensional MSC-laden microfibers via electrospinning in a rotating cell culture to mimic nerve tissue, control stem cell behavior, and promote integration with the host tissue. The hierarchically aligned fibrin hydrogel was used as the MSC carrier though a rotating method and the aligned fiber structure induced the MSC-aligned adhesion on the surface of the hydrogel to form microscale cell fibers. The MSC-laden microfiber implantation enhanced the donor MSC neural differentiation, encouraged the migration of host neurons into the injury gap and significantly promoted nerve fiber regeneration across the injury site. Abundant GAP-43- and NF-positive nerve fibers were observed to regenerate in the caudal, rostral, and middle sites of the injury position 8 weeks after the surgery. The NF fiber density reached to 29 ± 6 per 0.25 mm² at the middle site, 82 ± 13 per 0.25 mm² at the adjacent caudal site, and 70 ± 23 at the adjacent rostral site. Similarly, motor axons labeled with 5-hydroxytryptamine were significantly regenerated in the injury gap, which was 122 ± 22 at the middle injury site that was beneficial for motor function recovery. Most remarkably, the transplantation of MSC-laden microfibers significantly improved electrophysiological expression and re-established limb motor function. These findings highlight the combination of MSCs with microhydrogel fibers, the use of which may become a promising method for MSC implantation and SCI repair.

Design of hydrogel-based scaffolds for the treatment of spinal cord injuries

Hydrogel-based scaffold design approaches for the treatment of spinal cord injuries.

Harnessing neurovascular interaction to guide axon growth

Regulating the intrinsic interactions between blood vessels and nerve cells has the potential to enhance repair and regeneration of the central nervous system. Here, we evaluate the efficacy of aligned microvessels to induce and control directional axon growth from neural progenitor cells in vitro and host axons in a rat spinal cord injury model. Interstitial fluid flow aligned microvessels generated from co-cultures of cerebral-derived endothelial cells and pericytes in a three-dimensional scaffold. The endothelial barrier function was evaluated by immunostaining for tight junction proteins and quantifying the permeability coefficient (~10⁻⁷ cm/s). Addition of neural progenitor cells to the co-culture resulted in the extension of Tuj-positive axons in the direction of the microvessels. To validate these findings in vivo, scaffolds were transplanted into an acute spinal cord hemisection injury with microvessels aligned with the rostral-caudal direction. At three weeks post-surgery, sagittal sections indicated close alignment between the host axons and the transplanted microvessels. Overall, this work demonstrates the efficacy of exploiting neurovascular interaction to direct axon growth in the injured spinal cord and the potential to use this strategy to facilitate central nervous system regeneration.

Degradation of the electrospun silica nanofiber in a biological medium for primary hippocampal neuron - effect of surface modification

In this work, silica nanofibers (SNFs) were prepared by an electrospinning method and modified with poly-d-lysine (PDL) or (3-aminopropyl) trimethoxysilane (APTS) making biocompatible and degradable substrates for neuronal growth. The as-prepared SNF, modified SNF-PDL, and SNF-APTS were evaluated using scanning electron microscopy, nitrogen adsorption/desorption isotherms, contact angle measurements, and inductively coupled plasma atomic emission spectroscopy. Herein, the scanning electron microscopic images revealed that dissolution occurred in a corrosion-like manner by enlarging porous structures, which led to loss of structural integrity. In addition, covalently modified SNF-APTS with more hydrophobic surfaces and smaller surface areas resulted in significantly slower dissolution compared to SNF and physically modified SNF-PDL, revealing that different surface modifications can be used to tune the dissolution rate. Growth of primary hippocampal neuron on all substrates led to a slower dissolution rate. The three-dimensional SNF with larger surface area and higher surface density of the amino group promoted better cell attachment and resulted in an increased neurite density. This is the first known work addressing the degradability of SNF substrate in physiological conditions with neuron growth in vitro, suggesting a strong potential for the applications of the material in controlled drug release.

Genipin diffusion and reaction into a gelatin matrix for tissue engineering applications

Genipin is a natural low-toxic cross-linker for molecules with primary amino groups, and its use with collagen and gelatin has shown a great potential in tissue engineering applications. The fabrication of scaffolds with a well-organized micro and macro topology using additive manufacturing systems requires an accurate control of working parameters, such as reaction rate, gelling time, and diffusion constant. A polymeric system of 5% w/v gelatin in PBS with 2 mg/mL collagen solutions in a 1:1 weight ratio was used as template to perform measurements varying genipin concentration in a range of 0.1-1.5% w/w with respect to gelatin. In the first part of this work, the reaction rate of the polymeric system was estimated using a new colorimetric analysis of the reaction. Then its workability time, closely related to the gelling time, was evaluated thanks to rheological analysis: finally, the quantification of static and dynamic diffusion constants of genipin across nonreacting and reacting membranes, made respectively by agarose and gelatin, was performed. It was shown that the colorimetric analysis is a good indicator of the reaction progress. The gelling time depends on the genipin concentration, but a workability window of 40 min guaranteed up to 0.5% w/w genipin. The dynamic diffusion constant of genipin in the proposed polymeric system is in the order of magnitude of 10^-7 . The obtained results indicated the possibility to use the genipin, gelatin, and collagen, in the proposed concentrations, to build well-defined hydrogel scaffolds with both extrusion-based and 3D ink-jet system. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 473-480, 2017.

Intrinsic and extrinsic determinants of central nervous system axon outgrowth into alginate-based anisotropic hydrogels

Appropriate target reinnervation and functional recovery after spinal cord injury depend on longitudinally directed regrowth of injured axons. Anisotropic alginate-based capillary hydrogels (ACH) support peripheral nervous system derived axon growth, which is accompanied by glial supporting cell migration into the ACH. The aim of the present study was to analyze central nervous system (CNS) derived (entorhinal cortex, spinal cord slice cultures) axon regrowth into ACH containing linearly aligned capillaries of defined capillary sizes without and with gelatin constituent. Anisotropic ACH were prepared by ionotropic gel formation using Ba(2+), Cu(2+), Sr(2+), or Zn(2+) ions resulting in gels with average capillary diameters of 11, 13, 29, and 89μm, respectively. Postnatal rat entorhinal cortex or spinal cord slice cultures were placed on top of 500μm thick ACH. Seven days later axon growth and astroglial migration into the ACH were determined. Axon density within capillaries correlated positively with increasing capillary diameters, whereas longitudinally oriented axon outgrowth diminished with increasing capillary diameter. Axons growing into the hydrogels were always accompanied by astrocytes strongly suggesting that respective cells are required to mediate CNS axon elongation into ACH. Overall, midsize capillary diameter ACH appeared to be the best compromise between axon density and orientation. Taken together, ACH promote CNS axon ingrowth, which is determined by the capillary diameter and migration of slice culture derived astroglia into the hydrogel.

STATEMENT OF SIGNIFICANCE

Biomaterials are investigated as therapeutic tools to bridge irreversible lesions following traumatic spinal cord injury. The goal is to develop biomaterials, which promote longitudinally oriented regeneration of as many injured axons as possible as prerequisite for substantial functional recovery. Optimal parameters of the biomaterial have yet to be defined. In the present study we show that increasing capillary diameters within such hydrogels enhanced central nervous system axon regeneration at the expense of longitudinal orientation. Axon ingrowth into the hydrogels was only observed in the presence of glial supporting cells, namely astrocytes. This suggests that alginate-based hydrogels need to be colonized with respective cells in order to facilitate axon ingrowth.

Bridging the lesion-engineering a permissive substrate for nerve regeneration

Biomaterial-based strategies to restore connectivity after lesion at the spinal cord are focused on bridging the lesion and providing an favourable substrate and a path for axonal re-growth. Following spinal cord injury (SCI) a hostile environment for neuronal cell growth is established by the activation of multiple inhibitory mechanisms that hamper regeneration to occur. Implantable scaffolds can provide mechanical support and physical guidance for axon re-growth and, at the same time, contribute to alleviate the hostile environment by the in situ delivery of therapeutic molecules and/or relevant cells. Basic research on SCI has been contributing with the description of inhibitory mechanisms for regeneration as well as identifying drugs/molecules that can target inhibition. This knowledge is the background for the development of combined strategies with biomaterials. Additionally, scaffold design is significantly evolving. From the early simple hollow conduits, scaffolds with complex architectures that can modulate cell fate are currently being tested. A number of promising pre-clinical studies combining scaffolds, cells, drugs and/or nucleic acids are reported in the open literature. Overall, it is considered that to address the multi-factorial inhibitory environment of a SCI, a multifaceted therapeutic approach is imperative. The progress in the identification of molecules that target inhibition after SCI and its combination with scaffolds and/or cells are described and discussed in this review.

Repair of spinal cord injury by chitosan scaffold with glioma ECM and SB216763 implantation in adult rats

The loss of spinal cord tissue and the cavity formation are major obstacles to the repair of spinal cord injury (SCI). In the study, the scaffold of chitosan+ECM+SB216763 was fabricated and used for the repair of injured spinal cord injury. First, the biocompatibility of the scaffold was analyzed and results showed that the scaffold had a good compatibility with the neural stem cells. Especially, the processes of differentiated neural stem cell embedded in the scaffold were found in the experiment. At the same time, we also investigated the effect of scaffold on the differentiation of neural stem cell. The results showed that the scaffold of chitosan+ECM+SB216763 could significantly promote the differentiation of neural stem cells into neurons, astrocytes, and oligodendrocytes relative to those in other groups. In order to probe the application of scaffold in vivo, the rat models of spinal cord hemisection were set up and scaffolds were implanted into transected gap. Then the electrophysiology and BBB score were evaluated and results showed that the amplitude, latency period and BBB score in chitosan+ECM+SB216763 group were dramatically better than those in other groups. In addition, the differentiation of neural stem cells into nerve cells was also assayed and the results revealed that the number of neural stem cells differentiating into neuron, astrocytes and oligodendrocytes in chitosan+ECM+SB216763 group was significantly bigger than those in other groups. All these data suggested that the scaffold of chitosan+ECM+SB216763 would be a promising medium for the repair of injured spinal cord.

Functional improvement following implantation of a microstructured, type-I collagen scaffold into experimental injuries of the adult rat spinal cord

The formation of cystic cavitation following severe spinal cord injury (SCI) constitutes one of the major barriers to successful axonal regeneration and tissue repair. The development of bioengineered scaffolds that assist in the bridging of such lesion-induced gaps may contribute to the formulation of combination strategies aimed at promoting functional tissue repair. Our previous in vitro investigations have demonstrated the directed axon regeneration and glial migration supporting properties of microstructured collagen scaffold that had been engineered to possess mechanical properties similar to those of spinal cord tissues. Here, the effect of implanting the longitudinally orientated scaffold into unilateral resection injuries (2mm long) of the mid-cervical lateral funiculus of adult rats has been investigated using behavioural and correlative morphological techniques. The resection injuries caused an immediate and long lasting (up to 12 weeks post injury) deficit of food pellet retrieval by the ipsilateral forepaw. Implantation of the orientated collagen scaffold promoted a significant improvement in pellet retrieval by the ipsilateral forepaw at 6 weeks which continued to improve up to 12 weeks post injury. In contrast, implantation of a non-orientated gelatine scaffold did not result in significant functional improvement. Surprisingly, the improved motor performance was not correlated with the regeneration of lesioned axons through the implanted scaffold. This observation supports the notion that biomaterials may support functional recovery by mechanisms other than simple bridging of the lesion site, such as the local sprouting of injured, or even non-injured fibres.

PHBV/PAM scaffolds with local oriented structure through UV polymerization for tissue engineering

Locally oriented tissue engineering scaffolds can provoke cellular orientation and direct cell spread and migration, offering an exciting potential way for the regeneration of the complex tissue. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffolds with locally oriented hydrophilic polyacrylamide (PAM) inside the macropores of the scaffolds were achieved through UV graft polymerization. The interpenetrating PAM chains enabled good interconnectivity of PHBV/PAM scaffolds that presented a lower porosity and minor diameter of pores than PHBV scaffolds. The pores with diameter below 100 μm increased to 82.15% of PHBV/PAM scaffolds compared with 31.5% of PHBV scaffolds. PHBV/PAM scaffold showed a much higher compressive elastic modulus than PHBV scaffold due to PAM stuffing. At 5 days of culturing, sheep chondrocytes spread along the similar direction in the macropores of PHBV/PAM scaffolds. The locally oriented PAM chains might guide the attachment and spreading of chondrocytes and direct the formation of microfilaments via contact guidance.

Enhanced survival and neurite network formation of human umbilical cord blood neuronal progenitors in three-dimensional collagen constructs

Umbilical cord blood (CB) stem cells have been proposed for cell-based therapeutic applications for diverse diseases of the CNS. We hypothesized that tissue-engineering strategies may extend the efficacy of these approaches by improving the long-term viability and function of stem cell-derived neuronal progenitors. To test our hypothesis, we explored the survival and differentiation of human CB-derived neuronal progenitors (HUCBNP) in a three-dimensional (3D) collagen construct. In contrast to two-dimensional culture conditions, the cells survived in 3D for an extended period of time of more than 2 months. Under 3D conditions, HUCBNP underwent spontaneous neuronal differentiation, which was further enhanced by treatment with neuronal conditioned medium (CM) and nerve growth factor (NGF). Neurite outgrowth, quantified by assessing the fractal dimension (D f) of the complex neuronal networks, was significantly enhanced under 3D conditions in the presence of CM/NGF, concomitant with a reduced expression of the early neuronal marker nestin (1.9-fold), and increased levels of mature neuronal markers such as MAP-2 (3.6-fold), β-tubulin (1.5-fold), and neuronal specific enolase (6.6-fold) and the appearance of the synaptic marker synaptophysin. To assess the feasibility for clinical usage, HUCBNP were also isolated from frozen CB samples and cultured under 3D conditions. The data indicate the essential complete preservation of neurotrophic (survival) and neurotropic (neurite outgrowth) properties. In conclusion, 3D culture conditions are proposed as an essential step for both maintenance of CB neuronal progenitors in vitro and for investigating specific features of neuronal differentiation towards future use in regenerative therapy.