Colorimetric detection of Cu2+ and Pb2+ ions using calix[4]arene functionalized gold nanoparticles

Toward In-Field Determination of Nitrate Concentrations Via Diffusive Gradients in Thin Films-Incorporation of Reductants and Color Reagents

Diffusive gradients in thin films (DGTs) have been established as useful tools for the determination of nitrate, phosphate, trace metals, and organic concentrations. General use of DGTs, however, is limited by the subsequent requirement for laboratory analysis. To increase the uptake of DGT as a tool for routine monitoring by nonspecialists, not researchers alone, methods for in-field analysis are required. Incorporation of color reagents into the binding layer, or as the binding layer, could enable the easy and accurate determination of analyte concentrations in-field. Here, we sought to develop a chitosan-stabilized silver nanoparticle (AuNP) suspension liquid-binding layer which developed color on exposure to nitrite, combined with an Fe(0)-impregnated poly-2-acrylamido-2-methyl-1-propanesulfonic acid/acrylamide copolymer hydrogel [Fe(0)-p(AMPS/AMA)] for the reduction of nitrate. The AuNP-chitosan suspension was housed in a 3D designed and printed DGT base, with a volume of 2 mL, for use with the standard DGT solution probe caps. A dialysis membrane with a molecular weight cutoff of <15 kDa was used, as part of the material diffusion layer, to ensure that the AuNP-chitosan did not diffuse through to the bulk solution. This synthesized AuNP-chitosan provided quantitative nitrite concentrations (0 to 1000 mg L^-1) and masses (145 μg) in laboratory-based color development studies. An Fe(III)-impregnated poly-2-acrylamido-2-methyl-1-propanesulfonic acid/acrylamide copolymer hydrogel [Fe(III)-p(AMPS/AMA)] was developed (10% AMPS, and 90% AMA), which was treated with NaBH₄ to form an Fe(0)-p(AMPS/AMA) hydrogel. The Fe(0)-p(AMPS/AMA) hydrogel quantitatively reduced nitrate to nitrite. The total nitrite mass produced was ∼110 μg, from nitrate. The diffusional characteristics of nitrite and nitrate through the Fe(III)-p(AMPS/AMA) and dialysis membrane were 1.40 × 10^-5 and 1.40 × 10^-5 and 5.05 × 10^-6 and 5.15 × 10^-6 cm² s^-1 at 25 °C respectively. The Fe(0)-hydrogel and AuNP-chitosan suspension operated successfully in laboratory tests individually; however, the combined AuNP-chitosan suspension and Fe(0)-hydrogel DGT did not provide quantitative nitrate concentrations. Further research is required to improve the reaction rate of the AuNP-chitosan nitrite-binding layer, to meet the requirement of rapid binding to operate as a DGT.

A simple and cost-effective paper-based and colorimetric dual-mode detection of arsenic(iii) and lead(ii) based on glucose-functionalized gold nanoparticles

We report a simple and cost-effective paper-based and colorimetric dual-mode detection of As(iii) and Pb(ii) based on glucose-functionalized gold nanoparticles under optimized conditions. The paper-based detection of As(iii) and Pb(ii) is based on the change in the signal intensity of AuNPs/Glu fabricated on a paper substrate after the deposition of the analyte using a smartphone, followed by processing with the ImageJ software. The colorimetric method is based on the change in the color and the red shift of the localized surface plasmon resonance (LSPR) absorption band of AuNPs/Glu in the region of 200–800 nm. The red shift (Δλ) of the LSPR band observed was from 525 nm to 660 nm for As(iii) and from 525 nm to 670 nm for Pb(ii). The mechanism of dual-mode detection is due to the non-covalent interactions of As(iii) and Pb(ii) ions with glucose molecule present on the surface AuNPs, resulting in the aggregation of novel metal nanoparticles. The calibration curve gave a good linearity range of 20–500 μg L⁻¹ and 20–1000 μg L⁻¹ for the determination of As(iii) and Pb(ii) with the limit of detection of 5.6 μg L⁻¹ and 7.7 μg L⁻¹ for both metal ions, respectively. The possible effects of different metal ions and anions were also investigated but did not cause any significant interference. The employment of AuNPs/Glu is successfully demonstrated for the determination of As(iii) and Pb(ii) using paper-based and colorimetric sensors in environmental water samples.

We report a simple and cost-effective paper-based and colorimetric dual-mode detection of As(iii) and Pb(ii) based on glucose-functionalized gold nanoparticles under optimized conditions.

Stimuli-Responsive Plasmonic Assemblies and Their Biomedical Applications

Among the diverse development of stimuli-responsive assemblies, plasmonic nanoparticle (NP) assemblies functionalized with responsive molecules are of a major interest. In this review, we outline a comprehensive and up-to-date overview of recently reported studies on in vitro and in vivo assembly/disassembly and biomedical applications of plasmonic NPs, wherein stimuli such as enzymes, light, pH, redox potential, temperature, metal ions, magnetic or electric field, and/or multi-stimuli were involved. Stimuli-responsive assemblies have been applied in various biomedical fields including biosensors, surfaced-enhanced Raman scattering (SERS), photoacoustic (PA) imaging, multimodal imaging, photo-activated therapy, enhanced X-ray therapy, drug release, stimuli-responsive aggregation-induced cancer therapy, and so on. The perspectives on the use of stimuli-responsive plasmonic assemblies are discussed by addressing future scientific challenges involving assembly/disassembly strategies and applications.

Colorimetric determination of Pb2+ ions based on surface leaching of Au@Pt nanoparticles as peroxidase mimic

We report the first use of metallic nanozyme as colorimetric probe for Pb²⁺ determination. The method is based on the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanied by a decreased catalytic activity of the metallic nanozyme. To construct this colorimetric determination, the Pt deposition onto the AuNPs was carefully investigated and other experimental factors including kind of substrate and buffer were optimized. With increasing Pb²⁺ concentration, the catalytic activity of the Au@PtNPs decreased gradually. As a result, the blue color at 650 nm from the oxidation of 3,3',5,5'-tetramethylbenzidine by H₂O₂ faded gradually. A determination limit of 3.0 nM Pb²⁺ with a linear range from 20 to 800 nM was obtained. The assay demonstrated negligible response to common metal ions even at elevated concentrations. This colorimetric method was applied to the determination of Pb²⁺ ions spiked in lake water samples, and good recoveries (96.8-105.2%) were obtained. The above results indicate the potential application of metallic nanozymes in developing robust colorimetric assays. Graphical abstract Schematic representation of the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanying the decreased catalytic activity of the metallic nanozyme.

A dual-model SERS and RRS analytical platform for Pb(II) based on Ag-doped carbon dot catalytic amplification and aptamer regulation

Several carbon dots doping with diferent elements (Ca, Ag, Au) were fabricated and their catalytic properties had been investigated in this paper. It was found that the Ag-doped carbon dots (CDAg) had played a role of mimic enzyme on the reaction of HAuCl4-H2O2 and generated nanogold particles with surface enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) effects. The aptamer (Apt) can be adsorbed on the CDAg surface and cause the catalysis weakening. When the target Pb(II) was added, it would combine with the Apt to produce firm complexes Pb-Apt and desorb CDAg, which caused its catalytic effect restore. The formed nanogold had a strong RRS peak (at 375 nm) and a high SERS peak (at 1615 cm-1) in the presence of molecular probe (Victoria blue B, VBB). The dual-model signals of SERS and RRS increased linearly with Pb(II) concentration increase within the scope of 0.006-0.46 μmol/L and 0.01-0.46 μmol/L. And their detection limits respectively were 0.0032 μmol/L and 0.0048 μmol/L Pb(II).

Discovery, Mechanism, and Application of Antigalvanic Reaction

Among many outstanding findings associated with the quantum size effect, one of the most exciting is the discovery of the antigalvanic reaction (AGR), which is the opposite of the classic galvanic reaction (GR) that has a history of nearly 240 years. The GR, named after Italian scientist Luigi Galvani, involves the spontaneous reduction of a noble-metal cation by a less noble metal in solution driven by the difference in electrochemical potentials. Classic galvanic reduction has been widely applied and has recently received particular interest in nanoscience and nanotechnology. However, the opposite of GR, that is, reduction of metal ions by less reactive (or more noble) metals, has long been regarded as a virtual impossibility until the recent surprising findings regarding atomically precise ultrasmall metal nanoparticles (nanoclusters), which bridge the gap between metal atoms (complexes) and metal nanocrystals and provide opportunities for novel scientific findings due to their well-defined compositions and structures. The AGR is significant not only because it is the opposite of the classic galvanic theory but also because it opens extensive applications in a large range of fields, such as sensing and tuning the compositions, structures, and properties of nanostructures that are otherwise difficult to obtain. Starting with the proposal of the general AGR concept in 2012 by Wu, a new era began, in which AGR received widespread attention and was extensively studied. After years of effort, great advances have been achieved in the research on AGR, which will be reviewed below. In this Account, we first provide a short introduction to the AGR concept and then discuss the driving force of the AGR together with the effecting factors, including the ligand, particle size, solvent, metal ion precursor, and ion dose. Subsequently, the application of the AGR in engineering atomically precise alloy (bimetallic and trimetallic) and monometallic nanoclusters is described, and tuning the properties of the parent nanoclusters is also included. In particular, four alloying modes (namely, (i) addition, (ii) replacement, (iii) replacement and structural transformation, and (iv) nonreplacement and structural transformation) associated with the AGR are discussed. After that, the applications of the AGR in metal ion sensing and antioxidation are reviewed. Finally, future prospects are discussed, and some challenging issues are presented at the end of this Account. It is expected that this Account will stimulate more scientific and technological interests in the AGR, and exciting progress in the understanding and application of the AGR will be made in the coming years.

A highly sensitive pyridine-dicarbohydrazide based chemosensor for colorimetric recognition of Cu2+, AMP2−, F− and AcO− ions

A single colorimetric chemosensor for the detection of both Cu²⁺ and AMP²⁻ ions has been developed for the first time.

Selective Colorimetric Detection of Nitrite in Water using Chitosan Stabilized Gold Nanoparticles Decorated Reduced Graphene oxide

Excess nitrite (NO2-) concentrations in water supplies is considered detrimental to the environment and human health, and is associated with incidence of stomach cancer. In this work, the authors describe a nitrite detection system based on the synthesis of gold nanoparticles (AuNPs) on reduced graphene oxide (rGO) using an aqueous solution of chitosan and succinic acid. The AuNPs-rGO nanocomposite was confirmed by different physicochemical characterization methods including transmission electron microscopy, elemental analysis, X-ray diffraction, UV-visible (UV-vis) and Fourier transform infrared spectroscopy. The AuNPs-rGO nanocomposite was applicable to the sensitive and selective detection of NO2- with increasing concentrations quantifiable by UV-vis spectroscopy and obvious to the naked eye. The color of the AuNPs-rGO nanocomposite changes from wine red to purple with the addition of different concertation of NO2-. Therefore, nitrite ion concentrations can be quantitatively detected using AuNPs-rGO sensor with UV-vis spectroscopy and estimated with the naked eye. The sensor is able to detect NO2- in a linear response ranging from 1 to 20 μM with a detection limit of 0.1 μM by spectrophotometric method. The as-prepared AuNPs-rGO nanocomposite shows appropriate selectivity towards NO2- in the presence of potentially interfering metal anions.

Metal-induced aggregation of valine capped gold nanoparticles: An efficient and rapid approach for colorimetric detection of Pb2+ ions

In this study, we report a novel application of valine-capped gold nanoparticles for colorimetric and visual detection of lead ions. The -COO^- group of the hydrophobic valine molecules present efficient electrostatic repulsion resulting in generation of stable, well-dispersed and size-controlled GNPs. The GNPs were highly selective for Pb²⁺ ions and showed visible colour change in the assay mixture on addition of solution containing lead ions. Interestingly, a decrease in the intensity of original SPR peak at 530 nm was observed, with concomitant appearance of a new peak at longer wavelength due to agglomerated GNPs. The free -COO^- groups on GNP surface interacted with Pb²⁺ and ion-dependent chelation mechanism lead to cross-linking of particles and subsequent agglomeration. Binding of Pb²⁺ ions and valine-capped GNPs occur in a stochiometric ratio of 1:2. The GNPs displayed colorimetric sensing in the range of 0 to 100 ppm concentration with a very high selectivity towards lead even in the presence of other metal ions. The minimum detection limit (MDL) for Pb²⁺ was 30.5 µM. We anticipate that these valine-capped GNPs may be employed for lead detection in polluted water/wastewater through a cost-efficient, one-step assay protocol as it does not require additional functionalization with specific ligand molecules.

From Galvanic to Anti-Galvanic Synthesis of Bimetallic Nanoparticles and Applications in Catalysis, Sensing, and Materials Science

The properties of two alloyed metals have been known since the Bronze Age to outperform those of a single metal. How alloying and mixing metals applies to the nanoworld is now attracting considerable attention. The galvanic process, which is more than two centuries old and involves the reduction of a noble-metal cation by a less noble metal, has not only been used in technological processes, but also in the design of nanomaterials for the synthesis of bimetallic transition-metal nanoparticles. The background and nanoscience applications of the galvanic reactions (GRs) are reviewed here, in particular with emphasis on recent progress in bimetallic catalysis. Very recently, new reactions have been discovered with nanomaterials that contradict the galvanic principle, and these reactions, called anti-galvanic reactions (AGRs), are now attracting much interest for their mechanistic, synthetic, catalytic, and sensor aspects. The second part of the review deals with these AGRs and compares GRs and AGRs, including the intriguing AGRs mechanism and the first applications.

Calix-Based Nanoparticles: A Review

Calixarenes are considered as third generation supramolecules with hollow cavity-like architecture whereas nanoparticles are small entities with dimensions in the nanoscale. Many exciting achievements are seen when the calix system merges with nanoparticles which produces many fascinating facets in all fields of contemporary chemistry. The properties of nanoparticles which are tuned by calixarenes find applications in sensing, catalysis, molecular recognition, etc. Here, we have reviewed the chemistry of calix-based nanoparticles, and emphasis is laid on the modified, reducing, templated and stabilizing roles of calixarenes. This review covers the research being carried out in the domain of calix protected metal nanoparticles during last 18 years under the canopy of important 109 references. This article contains 58 figures which include 81 easy to understand structures. Calix-protected nanoparticles have enthralled researchers in the field of nanoscience with a tremendous growth in its applications, which heralds much promise to become in future a separate area of research.

Selective molecular recognition on calixarene-functionalized 3D surfaces

Calixarene based various 3D surface materials with unique signal amplification in molecular recognition are presented, including quantum dots (QDs), metal nanoparticles (NPs), nanotubes, and mesoporous silica.

A molecular assembly of piperidine carboxylic acid dithiocarbamate on gold nanoparticles for the selective and sensitive detection of Al3+ion in water samples

Schematic representation for the colorimetric sensing of Al³⁺ion using PCA-DTC-Au NPs as a probe.