Density functional theory studies on PVDF/ionic liquid composite systems

Sustainable Collagen Blends with Different Ionic Liquids for Resistive Touch Sensing Applications

Considering the sustainable development goals to reduce environmental impact, sustainable sensors based on natural polymers are a priority as the large im plementation of these materials is required considering the Internet of Things (IoT) paradigm. In this context, the present work reports on sustainable blends based on collagen and different ionic liquids (ILs), including ([Ch][DHP], [Ch][TSI], [Ch][Seri]) and ([Emim][TFSI]), processed with varying contents and types of ILs in order to tailor the electrical response. Varying IL types and contents leads to different interactions with the collagen polymer matrix and, therefore, to varying mechanical, thermal, and electrical properties. Collagen/[Ch][Seri] samples display the most pronounced decrease of the tensile strength (3.2 ± 0.4 MPa) and an increase of the elongation at break (50.6 ± 1.5%). The best ionic conductivity value of 0.023 mS cm^-1 has been obtained for the sample with 40 wt % of the IL [Ch][Seri]. The functional response of the collagen-IL films has been demonstrated on a resistive touch sensor whose response depends on the ionic conductivity, being suitable for the next generation of sustainable touch sensing devices.

Microscopic Mechanism of Electrical Aging of PVDF Cable Insulation Material

In this study, the quantum chemical method was used to investigate the microscopic characteristics of α-poly viny difluoride (PVDF) molecules under the influence of an electric field, and the impact of mechanical stress and electric field polarization on the insulation performance of PVDF was analyzed through the material's structural and space charge characteristics. The findings reveal that long-term polarization of an electric field leads to a gradual decline in stability and a reduction in the energy gap of the front orbital, resulting in the improved conductivity of PVDF molecules and a change in the reactive active site of the molecular chain. When the energy gap reaches a certain value, a chemical bond fracture occurs, with the C-H and C-F bonds at the ends of the backbone breaking first to form free radicals. This process is triggered by an electric field of 8.7414 × 10⁹ V/m, which leads to the emergence of a virtual frequency in the infrared spectrogram and the eventual breakdown of the insulation material. These results are of great significance in understanding the aging mechanism of electric branches in PVDF cable insulation and optimizing the modification of PVDF insulation materials.

High Lithium Salt Content PVDF-Based Solid-State Composite Polymer Electrolyte Enhanced by h-BN Nanosheets

Due to the unique safety qualities, solid composite polymer electrolyte (SCPE) has achieved considerable attentions to fabricate high-energy-density lithium metal batteries, but its overall performance still has to be improved. Herein, a high lithium salt content poly(vinylidene fluoride) (PVDF)-based SCPE was developed, enhanced by hexagonal boron nitride (h-BN) nanosheets, presenting perfect electrochemical performance, fast ion transport, and efficient inhibition of lithium dendrite growth. The optimized SCPE (PVDF-L70-B5) could deliver high ionic conductivity (2.98×10^-4  S cm^-1 ), ultra-high Li⁺ ion transfer number (0.62), wide electrochemical stability window (5.24 V), and strong mechanical strength (3.45 MPa) at room temperature. Density functional theory calculation further confirmed that the presence of h-BN could promote the dissociation of bis(trifluoromethanesulfonyl)imide lithium (LiTFSI) and the rapid transfer of Li⁺ ions. As a result, the assembled symmetric Li/Li battery and asymmetric Li/LiFePO₄ battery using PVDF-L70-B5 SCPEs both exhibited high reversible capacity, long-term cycle stability, and high-rate performance when cycled at 60 or 30 °C. The designed SCPEs will open up a new route to synthesize solid-state lithium batteries with high energy density and high safety.

Designer Peptide-PVDF Composite Films for High Performance Energy Harvesting

Polymers and peptides have recently been considered as promising materials for piezoelectric energy harvesting because of their biocompatibility and enormous design possibility. However, achieving significant output voltages while meeting environmental safety requirements, low-cost and easy fabrication remains a major challenge. Herein, we have fabricated a lipidated pseudopeptide incorporated poly(vinylidene fluoride) (PVDF) composite films. Adding lipidated pseudopeptide (BLHA) increases the electroactive phase content, reaching the maximum for the 2 wt% composite film. The composite film containing 2 wt% BLHA manifests the highest dielectric constant and remnant polarization (P_r ), among others. A piezoelectric energy harvesting device fabricated with this film generates open-circuit output voltages up to 23 V, five times amplified output compared to pure PVDF. To the best of our knowledge, this material is superior among the peptide-based piezoelectric energy harvesters reported in the literature. The device is flexible, durable, low-cost, and sensitive to high and low pressures. It can power up multiple LCD panels when pressed with a finger. The non-covalent interaction between BLHA and PVDF is the reason behind the composites' improved piezoelectric response. Density functional theory (DFT) calculations also support this notion. This article is protected by copyright. All rights reserved.

Ion Transport in the EMITFSI/PVDF System at Different Temperatures: A Molecular Dynamics Simulation

We used all-atom molecular dynamics simulations to study the ion transport in the 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/poly(vinylidene fluoride) (EMITFSI/PVDF) system with 40.05 wt % EMITFSI at different temperatures. The glass-transition temperature (T g = 204 K) of this system shows a good agreement with the experimental value (200 K). With the increase of temperature, the peaks of the pair correlation function show an increasing trend. Interestingly, the coordination numbers of ion pairs and the degree of independent ion motion are mainly affected by the binding energy between ion pairs as the temperature increases. In addition, the ion transport properties with increasing temperature can be studied by the ion-pair relaxation times, ion-pair lifetimes, and diffusion coefficients. The simulation results illustrate that the ion transport is intensified. Especially, the cations can always diffuse faster than the anions. The power law shows that mobilities of anions and cations are seen to exhibit a "superionic" behavior. With the increase of temperature, transference numbers of anions decrease first and then increase and transference numbers of cations show the opposite changes; ionic conductivity increases gradually; and viscosity decreases gradually, indicating that the diffusion resistance of ions decreases. In general, after adding PVDF into the EMITFSI system, the glass-transition temperature and viscosity increase, the ionic conductivity and degree of independent ion motion decrease, and diffusion coefficients of cations decrease faster than those of the anions.

Influence of polyethylene glycol plasticizer on the structural and electronic properties of PEO-NaI complex: a density functional study

Ab initio study has been carried out to investigate the influence of low molecular weight polyethylene glycol (PEG) plasticizer on structural and electronic properties of the polyethylene oxide-sodium iodide (PEO-NaI) polymer-metal complex. DOS and PDOS analysis provided a quantitative explanation of the electronic bandgap of the PEO-NaI and PEO-PEG-NaI system. Hirshfeld population charge analysis (HPA) explains better dissociation of NaI in presence of polyethylene glycol, based on the Hard Soft Acid Base Principle. Also, an increase in amorphic content of polymer system is observed with the addition of PEG, evident from the increment in the strength of anti-bonding orbitals in COOP plot. Bond strength of the polymeric system is also found to be affected with the addition of plasticizer. The findings provide an avenue that the present polymer system [PEO-PEG-NaI] is a potential candidate to be used as an electrolyte for next-generation energy storage technology.

A Succinct Review on the PVDF/Imidazolium-Based Ionic Liquid Blends and Composites: Preparations, Properties, and Applications

Poly(vinylidene fluoride) (PVDF) is a versatile thermoplastic fluoropolymer with intriguing characteristics, which is receiving considerable attention from researchers in many areas. Recently, PVDF and its copolymer, such as poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) have been blended with ionic liquids to produce blend and composite materials for target applications. In this succinct review, two types of ionic liquids that are utilized for the preparation of PVDF and PVDF-HFP blends and composites, namely, hydrophilic and hydrophobic imidazolium-based ionic liquids, are reviewed. In addition, the effect of the ionic liquids on the physicochemical properties of the PVDF and PVDF-HFP blends and composites, is described as well. On top of that, a multitude of applications of the blends and composites are also succinctly reviewed. This review may give inspirations to the polymer blend and composite researchers in diversifying the applications of thermoplastic fluoropolymers through the utilization of ionic liquids.

Characterization of Local Structures of Confined Imidazolium Ionic Liquids in PVdF-co-HFP Matrices by High Pressure Infrared Spectroscopy

The nanoscale ion ordering of ionic liquids at confined interfaces under high pressures was investigated in this study. 1-Hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([HMIM][NTf₂])/poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-co-HFP) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf₂])/PVdF-co-HFP were prepared and characterized by using high-pressure infrared spectroscopy. Under ambient pressure, imidazolium C²–H and C^4,5–H absorptions were blue-shifted in frequency due to the presence of PVdF-co-HFP. However, the absorption of anionic ν_a SO₂ did not reveal any significant shifts in frequency upon dilution by PVdF-co-HFP. The experimental results suggest that PVdF-co-HFP disturbs the local structures of the imidazolium C–H groups instead of the anionic SO₂ groups. The frequency shifts of C^4,5–H became dramatic for the mixtures at high pressures. These results suggest that pressure-enhanced ionic liquid–polymer interactions may play an appreciable role in IL-PVdF-co-HFP systems under high pressures. The pressure-induced blue-shifts due to the PVdF-co-HFP additions were more obvious for the [HMIM][NTf₂] mixtures than for [EMIM][NTf₂] mixtures.

Nonbonding interaction analyses on PVDF/[BMIM][BF4] complex system in gas and solution phase

The present study provides a detailed quantum chemical description of the physicochemical interactions between poly-vinylidene fluoride (PVDF) and 1-butyl-3-methyl-imidazolium tetrafluoro borate ([BMIM][BF₄]) ionic liquid (IL). Geometry optimization and frequency calculations are carried out for four monomer units of α- and β-PVDF, [BMIM][BF₄], and PVDF/[BMIM][BF₄] using dispersion corrected density functional theory. The effects of solvation on the systems under study are demonstrated for three polar aprotic solvents, namely tetra-hydrofuran (THF), acetone, and n,n-dimethyl formamide (DMF) using the integral equation formalism polarizable continuum model (IEFPCM). Calculated negative solvation free energy values suggest solution phase stability of the systems under study. Binding and interaction energies for β-PVDF/IL are found higher in magnitude than those for α-PVDF/IL. The nonbonding interaction phenomenon of β-PVDF/[BMIM][BF₄] is elucidated on the basis of natural bond orbital (NBO), Bader's quantum theory of atoms in molecules (QTAIM), delocalization indices, Hirshfeld surface, and reduced density gradient (RDG) analyses. Both anions and cations of ionic liquids are found to show weak van der Waals interaction with PVDF molecule but the anion ([BF₄]^-)/PVDF interaction is found to be stronger than cation ([BMIM]⁺)/PVDF interaction. Inter-unit C-H⋯F type hydrogen bonds are found to show improper (causing blue shifts in vibrational frequencies) nature. Frontier molecular orbital analysis is carried out, and different chemical parameters like electronegativity, chemical potential, chemical hardness and softness, and electrophilicity index are calculated using Koopmans' theorem. Thermochemical calculations are also performed, and the variation in different standard thermodynamic parameters with temperature is formulated. Graphical abstract (a) Hirshfeld surface mapped onto electron density and (b) NCI isosurfaces showing inter-unit interactions of β-PVDF/[BMIM][BF₄].