Potential of Recent Ambient Ionization Techniques for Future Food Contaminant Analysis Using (Trans)Portable Mass Spectrometry

An effective pretreatment technique based on multi-walled carbon nanotubes to reduce the matrix effect in plasma samples analyzed by a new type probe electrospray ionization method

The quantitative analysis of drug plasma samples plays an important role in the drug development and drug clinical use. Our research team developed a new electrospray ion source-Micro probe electrospray ionization (μPESI) in the early stage, which was combined with mass spectrometry (μPESI-MS/MS) showing good qualitative and quantitative analysis performance. However, matrix effect severely interfered the sensitivity in μPESI-MS/MS analysis. To solve this problem, we recently developed a Solid-phase purification method based on multi-walled carbon nanotubes (MWCNTs), which was used for removing matrix interfering substances (especially phospholipid compounds) in the preparation of plasma samples, so as to reduce the matrix effect. In this study, aripiprazole (APZ), carbamazepine (CBZ) and omeprazole (OME) were used as representative analytes, the quantitative analysis related to the plasma samples spiked with the analytes above and the mechanism of the MWCNTs to reduce matrix effect were both investigated. Compared with the ordinary protein precipitation, MWCNTs could reduced the matrix effect for several to dozens of times, which resulting from the removement of phospholipid compounds from the plasma samples by MWCNTs in the selective adsorption manner. We further validated the linearity, precision and accuracy of this pretreatment technique by the μPESI-MS/MS method. These parameters all met the requirements of FDA guidelines. It was showed that MWCNTs have a good application prospect in the drug quantitative analysis of plasma samples using the μPESI-ESI-MS/MS method.

μPESI-MS/MS System for Screening and Quantitating Drugs in Plasma Samples

Recently, we developed a novel microprobe electrospray ionization (μPESI) source and its coupled MS (μPESI-MS/MS) system. Here, we aimed to widely validate the μPESI-MS/MS method for quantitative analysis of drugs in plasma samples. Furthermore, the relationship between the quantitative performance of the μPESI-MS/MS method and the physicochemical properties of target drugs was analyzed. The μPESI-MS/MS methods for quantitative analysis of 5 representative drugs with a relatively wide range of molecular weight, pK_a, and log P values were developed and validated. The results showed that the linearity, accuracy, and precision of these methods met the requirements of the European Medicines Agency (EMA) guidance. Then a total of 75 drugs from plasma samples were primarily detected using the μPESI-MS/MS methods, among which 48 drugs could be quantitatively measured. Logistics regression suggested that drugs with significantly greater log P and physiological charge had better quantitative performance using the μPESI-MS/MS method. Collectively, these results clearly demonstrate the practical application of the μPESI-MS/MS system as a rapid approach to the quantitative analysis of drugs in plasma samples.

Plasma-based ambient mass spectrometry: Recent progress and applications

Ambient mass spectrometry (AMS) has grown as a group of advanced analytical techniques that allow for the direct sampling and ionization of the analytes in different statuses from their native environment without or with minimum sample pretreatments. As a significant category of AMS, plasma-based AMS has gained a lot of attention due to its features that allow rapid, real-time, high-throughput, in vivo, and in situ analysis in various fields, including bioanalysis, pharmaceuticals, forensics, food safety, and mass spectrometry imaging. Tens of new methods have been developed since the introduction of the first plasma-based AMS technique direct analysis in real-time. This review first provides a comprehensive overview of the established plasma-based AMS techniques from their ion source configurations, mechanisms, and developments. Then, the progress of the representative applications in various scientific fields in the past 4 years (January 2017 to January 2021) has been summarized. Finally, we discuss the current challenges and propose the future directions of plasma-based AMS from our perspective.

Onsite Identification and Spatial Distribution of Air Pollutants Using a Drone-Based Solid-Phase Microextraction Array Coupled with Portable Gas Chromatography-Mass Spectrometry via Continuous-Airflow Sampling

Hazardous air pollutants can be unintentionally and intentionally released in many cases, such as industrial emissions, accidental events, and pesticide application. Under such events, the onsite operation is highly dependent on the molecular composition and spatial distribution of air pollutants in ambient air. However, it is usually difficult for people to reach hazardous and upper sites rapidly. In this work, we designed a new drone-based microextraction sampler array in which a solid-phase microextraction (SPME) fiber was mounted on drones for remote-control sampling at different spaces and was then coupled with a portable gas chromatography-mass spectrometry (PGC-MS) approach for quickly identifying hazardous air pollutants and their spatial distribution in ambient air within minutes. Acceptable analytical performances, including good sensitivity (detection limit at nanogram per liter level), reproducibility (relative standard deviation < 20%, n = 6), analytical speed (single sample within minutes), and excellent linear dynamic response (3 orders of magnitude) were obtained for direct measurement of air samples. The drone-SPME sampling mechanism of air pollutants involving an airflow adsorptive microextraction process was proposed. Overall, this drone-SPME sampling array can access hard-to-reach and dangerous environmental sites and provide air pollution distribution in different spaces, showing versatile potential applications in environmental analysis.

Supramolecular solvent-based microextraction probe for fast detection of bisphenols by ambient mass spectrometry

In this study, we investigated for the first time the suitability of supramolecular solvent (SUPRAS)-based microextraction probe for the development of generic and fast sample treatment prior to qualitative analysis by ambient mass spectrometry (AMS) based on ASAP (atmospheric solids analysis probe). SUPRAS are nanostructured liquids formed by the self-assembly of amphiphilic aggregates with multiple binding sites and microenvironments of different polarity for the efficient extraction of multiple compounds. Different types of SUPRAS were evaluated as a simple and single step sample treatment for ASAP. The method was applied to the screening of bisphenol A and structural analogues in thermal paper. Optimal results were achieved with SUPRAS synthesized with 1-decanol in mixtures of ethanol:water. SUPRAS (1.1-2 μL) were loaded onto glass probes and placed in contact with samples for 10 s before ASAP analysis. AMS signal peaks (width: 0.2-0.5 min) were easily integrated and normalized with internal standards (RSD: 2-25%). The method was applied to 62 samples of thermal paper. BPA and BPS were the most widely used, this highlighting the progressive industrial replacement of BPA by BPS.

A critical comparison between an ultra-high-performance liquid chromatography triple quadrupole mass spectrometry (UHPLC-QqQ-MS) method and an enzyme assay for anti-cholinesterase pesticide residue detection in cereal matrices

Analytical method development for the control of pesticide residues occurring in significant dietary foodstuffs is of utmost importance considering their potential impact on consumer health and food market sustainability. Depending on the purpose, either instrumental analysis, mainly chromatographic methods, or screening assays, mostly using biorecognition affinity, are commonly used, featuring different advantages and drawbacks. To practically compare these two different types of analytical strategies, we applied them for the detection of (i) 97 organophosphate (OP) and carbamate (CM) pesticide residues in wheat flour and (ii) carbofuran (a carbamate insecticide) in wheat, rye and maize flour samples. Regarding high-end analysis, an ultra-high-performance liquid chromatography coupled with triple quadrupole mass spectrometry (UHPLC-QqQ-MS) method was developed and validated achieving low limits of quantification (LOQs, from 0.002 to 0.040 mg kg^-1) and a short chromatographic run (12 min). In terms of bioanalytical methods, a fast (17 min) and cost-efficient (∼0.01€ per sample) acetylcholinesterase (AChE) microplate assay for carbofuran screening was utilized. Importantly, carbofuran was the strongest of the 11 OP and CM tested pesticides achieving a half maximal inhibitory concentration (IC₅₀) of 0.021 μM whilst the assay detectability was at the parts per billion level in all three cereal matrices. Based on the attained results, a critical discussion is presented providing the analytical merits and bottlenecks for each case and a wider outlook related to the application of analytical methods in the food safety control analytical scheme.

A spotlight on analytical prospects in food allergens: From emerging allergens and novel foods to bioplastics and plant-based sustainable food contact materials

The present review throws a spotlight on new and emerging food safety concerns in view of a well-established food allergen risk arising from global socio-economic changes, international trade, circular economy, environmental sustainability, and upcycling. Food culture globalization needs harmonization of regulations, technical specifications, and reference materials towards mutually recognised results. In parallel, routine laboratories require high-throughput reliable analytical strategies, even in-situ testing devices, to test both food products and food contact surfaces for residual allergens. Finally, the currently neglected safety issues associated to possible allergen exposure due to the newly proposed bio- and plant-based sustainable food contact materials require an in-depth investigation.

Simplified screening approach of anabolic steroid esters using a compact atmospheric solid analysis probe mass spectrometric system

Due to the absence of chromatographic separation, ambient ionization mass spectrometry had the potential to improve the throughput of control laboratories in the last decades and will soon be an excellent approach for on-site use as well. In this study, an atmospheric solids analysis probe (ASAP) with a single quadrupole mass analyzer has been evaluated to identify anabolic steroid esters rapidly. Sample introduction, applied scan time, and probe temperature were optimized for sensitivity. The in-source fragmentations of seventeen selected steroid esters, commonly found in illicit samples, were determined by applying different cone voltages (12, 20, 30, and 40 V). A spectral library was created for these steroid esters based on the four stages of in-source fragmentation spectra. The applicability of this method was demonstrated for the rapid identification of steroid esters in oily injection solutions, providing test results in less than 2 min.

Immuno-Enriched Microspheres - Magnetic Blade Spray-Tandem Mass Spectrometry for Domoic Acid in Mussels

Paramagnetic microspheres can be used in planar array fluorescence immunoassays for single or multiplex screening of food contaminants. However, no confirmation of the molecular identity is obtained. Coated blade spray (CBS) is a direct ionization mass spectrometry (MS) technique, and when combined with triple quadrupole MS/MS, it allows for rapid confirmation of food contaminants. The lack of chromatography in CBS, though, compromises the specificity of the measurement for unequivocal identification of contaminants, based on the European Union (EU) regulation. Therefore, a rapid and easy-to-use immuno-magnetic blade spray (iMBS) method was developed in which immuno-enriched paramagnetic microspheres replace the coating of CBS. The iMBS-MS/MS method was fully optimized, validated in-house following the EU 2021/808 regulation, and benchmarked against a commercial lateral flow immunoassay (LFIA) for on-site screening of DA. The applicability of iMBS-MS/MS was further demonstrated by analyzing incurred mussel samples. The combination of immunorecognition and MS/MS detection in iMBS-MS/MS enhances the measurement's selectivity, which is demonstrated by the rapid differentiation between the marine toxin domoic acid (DA) and its structural analog kainic acid (KA), which cannot be achieved with the LFIA alone. Interestingly, this first-ever reported iMBS-MS/MS method is generic and can be adapted to include any other immuno-captured food contaminant, provided that monoclonal antibodies are available, thus offering a complementary confirmatory analysis approach to multiplex immunoassay screening methods. Moreover, thanks to its speed of analysis, iMBS-MS/MS can bridge the logistics gap between future large-scale on-site testings using LFIAs and classical time-consuming confirmatory MS analysis performed in official control laboratories.

Clinical Chemistry for Developing Countries: Mass Spectrometry

Early disease diagnosis is necessary to enable timely interventions. Implementation of this vital task in the developing world is challenging owing to limited resources. Diagnostic approaches developed for resource-limited settings have often involved colorimetric tests (based on immunoassays) due to their low cost. Unfortunately, the performance/sensitivity of such simplistic tests are often limited and significantly hinder opportunities for early disease detection. A new criterion for selecting diagnostic tests in low- and middle-income countries is proposed here that is based on performance-to-cost ratio. For example, modern mass spectrometry (MS) now involves analysis of the native sample in the open laboratory environment, enabling applications in many fields, including clinical research, forensic science, environmental analysis, and agriculture. In this critical review, we summarize recent developments in chemistry that enable MS to be applied effectively in developing countries. In particular, we argue that closed automated analytical systems may not offer the analytical flexibility needed in resource-limited settings. Alternative strategies proposed here have potential to be widely accepted in low- and middle-income countries through the utilization of the open-source ambient MS platform that enables microsampling techniques such as dried blood spot to be coupled with miniature mass spectrometers in a centralized analytical platform. Consequently, costs associated with sample handling and maintenance can be reduced by >50% of the total ownership cost, permitting analytical measurements to be operated at high performance-to-cost ratios in the developing world.

Minimizing transient microenvironment-associated variability for analysis of environmental anthropogenic contaminants via ambient ionization

The rapid and quantitative analysis of anthropogenic contaminants in environmental matrices is crucial for regulatory testing and to elucidate the environmental fate of these pollutants. Direct ambient mass spectrometry (AMS) methodologies greatly increase sample throughput, can be adapted for onsite analysis and are often regarded as semi-quantitative by most developed protocols. One of the limitations of AMS, especially for on site analysis applications, is the irreproducibility of the measurements related to the occurrence of transient microenvironments (TME) and variable background interferences. In this work we report an effective strategy to minimize these effects by hyphenating, for the first time, solid phase microextraction (SPME) arrow to mass spectrometry via a thermal desorption unit (TDU) and direct analysis in real time (DART) source. The developed method was optimized for the extraction and analysis of pesticides and pharmaceuticals from surface water. It was demonstrated that the hyphenation of the SPME and TDU-DART resulted in reduced background contamination, indicating the suitability of the method for onsite analysis even in variable and non-ideal environments. Model analytes were quantitated in the low μg/L range with a total analysis time of less than 5 min, linear dynamic ranges (LDR) and interday reproducibility for most compounds being 2.5-500 μg/L and lower than 10%, respectively. The developed approach provides an excellent analytical tool that can be applied for the onsite high-throughput analysis of water samples as well as air and aereosols. Considering the tunability of our extraction process, time-resolved environmental monitoring can be achieved onsite within minutes.

ASSURED Point-of-Need Food Safety Screening: A Critical Assessment of Portable Food Analyzers

Standard methods for chemical food safety testing in official laboratories rely largely on liquid or gas chromatography coupled with mass spectrometry. Although these methods are considered the gold standard for quantitative confirmatory analysis, they require sampling, transferring the samples to a central laboratory to be tested by highly trained personnel, and the use of expensive equipment. Therefore, there is an increasing demand for portable and handheld devices to provide rapid, efficient, and on-site screening of food contaminants. Recent technological advancements in the field include smartphone-based, microfluidic chip-based, and paper-based devices integrated with electrochemical and optical biosensing platforms. Furthermore, the potential application of portable mass spectrometers in food testing might bring the confirmatory analysis from the laboratory to the field in the future. Although such systems open new promising possibilities for portable food testing, few of these devices are commercially available. To understand why barriers remain, portable food analyzers reported in the literature over the last ten years were reviewed. To this end, the analytical performance of these devices and the extent they match the World Health Organization benchmark for diagnostic tests, i.e., the Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment-free, and Deliverable to end-users (ASSURED) criteria, was evaluated critically. A five-star scoring system was used to assess their potential to be implemented as food safety testing systems. The main findings highlight the need for concentrated efforts towards combining the best features of different technologies, to bridge technological gaps and meet commercialization requirements.

Hand-Held Diode Laser for On-Site Analysis Using Transportable Mass Spectrometry

A hand-held laser diode thermal desorption electrospray ionization (LDTD-ESI) mass spectrometry (MS) method was developed for rapid screening of illegal substances in solid samples. To achieve that, a simple, inexpensive, battery-powered surgical laser diode at 940 nm was employed to ablate the solid samples. The potential of using a black polytetrafluoroethylene substrate to enhance the analytes’ desorption to the gas phase was investigated and demonstrated. Among the optimized ESI parameters, the solvent (methanol/water, 50:50, v/v) and the flow rate (50 μL h^–1) were critical to obtain the best sensitivity. The applicability was demonstrated for the rapid identification of selective androgen receptor modulators (SARMs) in pills and powders based on accurate mass measurements by time-of-flight MS. Also, the hand-held LDTD-ESI was combined with a transportable single quadrupole MS. The same SARMs samples were analyzed, and identifications were based on in-source cone voltage fragmentation patterns observed. These initial results demonstrate the applicability of the developed simplified LDTD-ESI MS method for future on-site testing of organic compounds in solid samples.

In vivo solid-phase microextraction swab-mass spectrometry for multidimensional analysis of human saliva

Solid phase microextraction (SPME) is one of the most powerful sample preparation techniques for analyte extraction and enrichment from complex matrices. SPME fibers are commonly used to extract analytes from collected samples. Following our recent work on development of in vivo SPME swab that integrates an SPME fiber and a medical swab (Anal Chim Acta, 2020, 1124, 71-77), the multiple SPME fibers inserted into a medical swab (multiple-SPME swab) is further developed to couple with different mass spectrometry (MS) approaches for multidimensional analysis of human saliva in this work. The new features of cotton ball and SPME fiber of multiple-SPME swab are investigated. Biomarker discovery and disease diagnosis using multiple-SPME swab are also demonstrated. The present study shows that direct coupling multiple-SPME swab with different MS-based approaches could be simple and versatile in vivo method to expand the classes of analytes extracted simultaneously from human saliva.

Ciguatera Mini Review: 21st Century Environmental Challenges and the Interdisciplinary Research Efforts Rising to Meet Them

Globally, the livelihoods of over a billion people are affected by changes to marine ecosystems, both structurally and systematically. Resources and ecosystem services, provided by the marine environment, contribute nutrition, income, and health benefits for communities. One threat to these securities is ciguatera poisoning; worldwide, the most commonly reported non-bacterial seafood-related illness. Ciguatera is caused by the consumption of (primarily) finfish contaminated with ciguatoxins, potent neurotoxins produced by benthic single-cell microalgae. When consumed, ciguatoxins are biotransformed and can bioaccumulate throughout the food-web via complex pathways. Ciguatera-derived food insecurity is particularly extreme for small island-nations, where fear of intoxication can lead to fishing restrictions by region, species, or size. Exacerbating these complexities are anthropogenic or natural changes occurring in global marine habitats, e.g., climate change, greenhouse-gas induced physical oceanic changes, overfishing, invasive species, and even the international seafood trade. Here we provide an overview of the challenges and opportunities of the 21st century regarding the many facets of ciguatera, including the complex nature of this illness, the biological/environmental factors affecting the causative organisms, their toxins, vectors, detection methods, human-health oriented responses, and ultimately an outlook towards the future. Ciguatera research efforts face many social and environmental challenges this century. However, several future-oriented goals are within reach, including digital solutions for seafood supply chains, identifying novel compounds and methods with the potential for advanced diagnostics, treatments, and prediction capabilities. The advances described herein provide confidence that the tools are now available to answer many of the remaining questions surrounding ciguatera and therefore protection measures can become more accurate and routine.

Miniaturized sample preparation techniques and ambient mass spectrometry as approaches for food residue analysis

Analytical methods such as liquid chromatography (LC) and mass spectrometry (MS) are widely used techniques for the analyses of different classes of compounds. This is due to their highlighted capacity for separating and identifying components in complex matrices such food samples. However, in most cases, effective analysis of the target analyte becomes challenging due to the complexity of the sample, especially for quantification of trace concentrations. In this case, miniaturized sample preparation methods have been used as a strategy for analysis of complex matrices. This involves removing the interferents and concentrating the analytes in a sample. These methods combine simplicity and effectiveness and given their miniaturized scale, they are in accordance with green chemistry precepts. Besides, ambient mass spectrometry represents a new trend in fast and rapid analyses, especially for qualitative and screening analysis. However, for complex matrix analyses, sample preparation is still a difficult step and the miniaturized sample preparation techniques show great potential for an improved and widespread use of ambient mass spectrometry techniques. . This review aims to contribute as an overview of current miniaturized sample preparation techniques and ambient mass spectrometry methods as different approaches for selective and sensitive analysis of residues in food samples.

USB-Powered Coated Blade Spray Ion Source for On-Site Testing Using Transportable Mass Spectrometry

On-site testing in food analysis using mass spectrometry (MS) requires miniaturization of vacuum systems, mass analyzers, sample cleanup, and ionization sources. In this study, a simple coated blade spray (CBS) ion source was developed that enables high voltage generation on the blade by ubiquitous certified (micro-)USB On-The-Go devices like smartphones, tablets, and power banks. CBS is capable of performing both analyte enrichment by solid-phase microextraction (SPME) material coated on the metal substrate and direct-spray ionization. The USB-CBS device was used on two different MS systems, a transportable single-quadrupole and a benchtop triple-quadrupole tandem MS. Various characteristics of the USB-CBS device, including high voltage generation and angular positioning, were studied. The potential of the newly developed device for food safety applications is demonstrated by banned and regulated veterinary drugs such as β-agonists and sulfonamide antibiotics, covering a wide range of molecular weights and polarities. The results highlight the potential of the developed, simplified, inexpensive (less than 10 USD), and universal vendor-independent USB-powered CBS ion source coupled with MS(/MS) systems for semiquantitative applications, in laboratories, and in future on-site food quality and safety testing. Apart from that, most likely on-site environmental, biomedical, and forensic testing will also benefit from this USB-CBS instrumental development that is compatible with any atmospheric inlet MS system.

Rapid detection of asperphenamate in a hay batch associated with constipation and deaths in dairy cattle. The application of DART-HRMS to veterinary forensic toxicology

Direct analysis in real time (DART) coupled to high-resolution mass spectrometry (HRMS) was applied for the first time to veterinary forensic toxicology to investigate the presence of toxic compounds in hay after an episode of acute intoxication in a dairy cattle farm. In addition to gross field necropsy and histological examination, microbial cultures, and heavy metals analysis, the molecular fingerprinting of the suspected hay batch was investigated by DART-HRMS. DART-HRMS revealed a distinct signal of m/z 507.2289 in the hay batch thought to be associated with the digestive complications. A search on chemical structure databases matched the ion with asperphenamate, a toxin produced by Penicillium spp. and Aspergillus spp. Liquid Chromatography-HMRS analysis and electrospray-HRMS-MS/MS of the hay extracts further characterized the structure and confirmed the identification of the compound as asperphenamate. Asperphenamate is fungal metabolite which can have cytotoxic and antitumor activity in humans, and it is classified as acute toxicant and harmful if swallowed.

Multiresidue pesticide quantitation in multiple fruit matrices via automated coated blade spray and liquid chromatography coupled to triple quadrupole mass spectrometry

Application of ambient mass spectrometry techniques to accelerate analysis of pesticides in produce, with technique validation via chromatographic separation, has not been explored extensively. In this work, coated blade spray (CBS) was used to provide freedom of instrumental choice for a multiresidue panel of pesticides in apple, blueberry, grape, and strawberry through direct-coupling with mass spectrometry (MS) and liquid chromatographic (LC) analyses. For all four matrices, >125 compounds were found to meet European Union guidelines concerning linearity, precision, and accuracy while both CBS-MS/MS and SPME-LC-MS/MS methods achieved limits of quantitation below their minimum regulatory limits. Additionally, results for samples containing residues (n = 57) yielded good agreement between instrumental methods (percent differences < 20% for 73% residues), supporting CBS as a stand-alone technique or complement to LC confirmation of pesticides in fruit matrices.

In vivo solid-phase microextraction swab sampling of environmental pollutants and drugs in human body for nano-electrospray ionization mass spectrometry analysis

In vivo sampling and sensitive detection of environmental pollutants and drugs in human body play a crucial role in understanding human health. In this study, in vivo solid-phase microextraction (SPME) swab was fabricated using a SPME fiber and a medical cotton swab for noninvasive sampling and extraction of environmental pollutants and drugs in human oral cavity, nasal cavity and on skin surface. After sampling, SPME was coupled with nano-electrospray ionization mass spectrometry (nanoESI-MS) for desorption, ionization, and detection of the extracted analytes. As a result, limit of detection (LOD) and limit of quantification (LOQ) of nicotine in oral fluid were found to be 1.0 pg/mL (S/N ≥ 3) and 4.0 pg/mL (S/N ≥ 10), respectively. Linear dynamic signal responses of nicotine exhibited excellent linearity (R² = 0.9996) in human oral fluid ranging from 0.1 to 50 ng/mL. The coefficient of variation (CV) values of SPME swab for five measurements from sample vials and human body were 5.1-6.7% and 22.7-32.6%, respectively. Rapid analysis of a single sample could be completed within 10 min. Overall, our results demonstrated that SPME swab-MS is a promising noninvasive method for enhanced detection of analytes in human body.