Highly Sensitive Detection of Thiabendazole Residues in Food Samples Based on Multiwall Carbon Nanotubes Decorated Two-Dimensional Layered Molybdenum Disulfide

Highly Sensitive and Wide-Range Detection of Thiabendazole via Surface-Enhanced Raman Scattering Using Bimetallic Nanoparticle-Functionalized Nanopillars

Thiabendazole (TBZ) is a benzimidazole; owing to its potent antimicrobial properties, TBZ is extensively employed in agriculture as a fungicide and pesticide. However, TBZ poses environmental risks, and excessive exposure to TBZ through various leakage pathways can cause adverse effects in humans. Therefore, a method must be developed for early and sensitive detection of TBZ over a range of concentrations, considering both human and environmental perspectives. In this study, we used silver nanopillar structures (SNPis) and Au@Ag bimetallic nanoparticles (BNPs) to fabricate a BNP@SNPi substrate. This substrate exhibited a broad reaction surface with significantly enhanced surface-enhanced Raman scattering hotspots, demonstrating excellent Raman performance, along with high reproducibility, sensitivity, and selectivity for TBZ detection. Ultimately, the BNP@SNPi substrate successfully detected TBZ across a wide concentration range in samples of tap water, drinking water, juice, and human serum, with respective limits of detection of 146.5, 245.5, 195.6, and 219.4 pM. This study highlights BNP@SNPi as a promising sensor platform for TBZ detection in diverse environments and contributes to environmental monitoring and bioanalytical studies.

A robust electrochemical sensor based on AgNWs@MoS2 for highly sensitive detection of thiabendazole residues in food samples

Thiabendazole (TBZ), a highly toxic phosphorothioate insecticide commonly used in postharvest fruit management, has the potential to cause detrimental effects on human health as an endocrine disruptor. In this study, an electrochemical sensor was developed to detect TBZ by modifying MoS2 on silver nanowires (Ag NWs@MoS2) and integrating them onto a glassy carbon surface. Cyclic voltammetry revealed that TBZ underwent an irreversible, diffusion-controlled process on Ag NWs@MoS2, leading to a two-fold increase in peak current compared to unmodified MoS2. Square wave voltammetry facilitated TBZ detection, and the sensor exhibited a linear range of 0.05-10 μM with a high coefficient of determination (R2 = 0.9958) and a limit of detection (LOD) of 1.75 nM (signal-to-noise ratio = 3). The sensor's applicability for food safety monitoring was verified through TBZ analysis in pear and apple samples, achieving recoveries of 95.5-103.6% with RSDs in the range of 1.98-3.25%.

New analytical strategies amplified with carbon-based nanomaterial for sensing food pollutants

The most significant topic currently under the moonlight is Nanobiotechnology and engineered nanomaterials. The novel characteristics displayed by engineered Nanomaterials, especially carbon-based nanomaterials, have spurred interest in its potential application in the food industry. It has provided opportunities for finding solutions to the long-standing challenges in the food industry to assess food safety, maintain food quality, extend the shelf life of produce, and efficiently deliver nutrients. Nanomaterials can be incorporated in food sensors facilitating efficient monitoring of crop maturity and detecting biological and chemical contaminants. When integrated into food packages, nanomaterials could aid in assessing the freshness and improving the quality of packaged foods. In addition, more efficient delivery of nutrients could be possible in foods fortified using nano compounds. The initial section of this review gives an overview of the broad application of nanotechnology in the food industry and carbon-based nanomaterials. The latter part focuses on nanotechnology in biosensors for food safety and quality monitoring.

2D leaf-like ZIF-L decorated with multi-walled carbon nanotubes as electrochemical sensing platform for sensitively detecting thiabendazole pesticide residues in fruit samples

Excessive use of pesticides in modern agriculture results in large amounts of pesticide residues in agricultural production, greatly threatening human health. Herein, novel two-dimensional leaf-like zeolitic imidazolate framework-L decorated with multi-walled carbon nanotubes (MWCNTs/ZIF-L) was prepared by a facile solvent way and exploited as electrode material for sensitive electrochemical sensing of thiabendazole (TBZ). Two-dimensional ZIF-L presents high surface area, large pore volume, and abundant active sites, which exhibits high enrichment ability towards TBZ molecules, while the MWCNTs interspersed on ZIF-L can prominently enhance the electron transport capability and improve the electrocatalytic activity for TBZ oxidation. Due to the intriguing synergy between the components, the MWCNTs/ZIF-L-based electrochemical sensor reveals a limit of detection (LOD) of 6.0 nmol·L^-1, which is lower than that reported in most literatures. Additionally, satisfactory reproducibility and repeatability, long-term stability, and excellent selectivity are acquired. The proposed method was also applied for the detection of TBZ in apple and orange samples with acceptable recoveries.

Anchoring Metallic MoS2 Quantum Dots over MWCNTs for Highly Sensitive Detection of Postharvest Fungicide in Traditional Chinese Medicines

Carbendazim, a very common contamination to the traditional Chinese medicines (TCMs), has posed serious threat to the environment and human health. However, sensitive and selective detection of carbendazim (MBC) in the TCMs is a big challenge for their complex chemical constituents. In this work, a 0D/1D nanohybrid was developed by anchoring 1T-phased MoS₂ quantum dots (QDs) over multiwall carbon nanotubes (MWCNTs) via a facile assembly method. High-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis (TGA) together with EIS reveal that the 1T-phased QDs can anchor over MWCNTs via van der Waals forces, and the anchoring improves the nanohybrid surface area and conductivity. Therefore, the electrochemical sensor fabricated based on the MoS₂ QDs@MWCNT nanohybrid shows excellent catalytic activity to MBC oxidation. Under optimized conditions, the sensor presents a linear voltammetry response to MBC concentration from 0.04 to 1.00 μmol·L^-1, a low detection limit of 2.6 × 10^-8 mol·L^-1, as well as high selectivity, good reproducibility, and long-term stability. Moreover, the sensor has been successfully employed to determine MBC in two typical TCMs and the obtained recoveries are in good accordance with the results achieved by HPLC, showing that the constructed sensor plate holds great practical application in MBC analysis with complex matrix.

Highly sensitive and rapid detection of thiabendazole residues in oranges based on a luminescent Tb3+-functionalized MOF

Thiabendazole (TBZ), has been extensively employed as a pesticide and/or a fungicide in agriculture, while its residues would threaten to public health and safety. Simple, rapid and sensitive probes for detection of TBZ in real food samples is significantly desirable. In present work, a highly selective and sensitive luminescent sensor for monitoring TBZ in oranges has been constructed based on a Tb³⁺-functionalized Zr-MOF (Tb³⁺@1). Tb³⁺@1 exhibited many attractive sensing properties toward TBZ, including broad linear range (0-80 μM), high selectivity, low LOD (0.271 μM) and rapid response time (less than1 min). Moreover, the probe was employed to determine TBZ in real orange samples, in which good recoveries from 98.41 to 104.48% were obtained. It only takes 35 min for the whole process of detection TBZ in real orange samples combined with QuEChERS method. Therefore, this work provided a reliable and rapid method for monitoring the TBZ in real orange samples.