Determination of Carvacrol and Thymol in Honey by Using a Simple and Efficient Headspace-Gas Chromatography-Mass Spectrometry Method

A nanozyme with switchable enzyme-like activity for the logic gates detection of thymol and hydrogen peroxide in honey

A new nanozyme (CuGaa) with switchable enzyme-like activity of peroxidase and polyphenol oxidase was successfully prepared based on guanidinoacetic acid and copper. The two enzyme-like activities can be easily switched by changing temperature or adding MnCl2. At 4 °C, polyphenol oxidase-like activity decreased to nearly 1%, and the material is mainly characterized by peroxidase-like activity at this point. However, at 60 °C in the presence of 20 mM MnCl2, the peroxidase-like activity decreased to nearly 10%, and the polyphenol oxidase-like activity of the materials increased to 140%. Based on the switchable enzyme-like activity of CuGaa, detection methods for thymol and hydrogen peroxide were developed. In addition, a rapid combination strategy was further established combined with logic gate technology for the facile identification of complex contamination in honey, which provided new ideas for low-cost and rapid honey identification.

Hierarchical covalent organic framework hollow nanofibers-bonded stainless steel fiber for efficient solid phase microextraction

The solid phase microextraction (SPME) technique has been widely applied in the detection of trace compounds in food, environment, and medicine due to its advantages of easy quantification, simple operation, and greenness. Herein, a templating strategy with SiO2 nanofibers (SiO2 NFs) is reported to synthesize hierarchical covalent organic framework hollow nanofibers (COF HNFs)-coated stainless steel fiber for SPME application with dramatically enhanced enrichment performance for trace analytes. The construction of hierarchical porosity inside the microextraction coatings can not only increase the specific surface area of COF extraction materials for obtaining more abundant adsorption sites but also greatly improve the accessibility of internal COF micropores. Moreover, the thicknesses of the microextraction COF coatings can be facilely tailored by adjusting the amount of SiO2 NFs pre-assembled on the SPME fibers. On the headspace solid phase microextraction (HS-SPME) of antimicrobial residues, the developed COF TpBD-Me2 HNFs-12 fibers achieve enrichment factors of 2026 and 1823 for thymol and carvacrol respectively, which are significantly higher than those obtained from the counterpart COF TpBD-Me2-bonded fiber (8.5-8.2 times) and commercial CAR/PDMS fiber (3.3-4.4 times). Furthermore, the developed method was demonstrated to have wide linearity (0.1-50 μg L-1), low limits of detection (0.010 μg L-1), good thermal stability and excellent reusability (>60 recycles), demonstrating great application potential in the extraction of trace organic pollutants. The strategy developed in this work is applicable to preparing a variety of topological COF (e.g., TpBD, TpPa-1) HNFs-bonded fibers.

Electrode Based on the MWCNTs and Electropolymerized Thymolphthalein for the Voltammetric Determination of Total Isopropylmethylphenols in Spices

Isopropylmethylphenols, namely thymol and carvacrol, are natural phenolic monoterpenoids with a wide spectrum of bioactivity making them applicable in the cosmetic, pharmaceutical, and food industry. The dose-dependent antioxidant properties of isopropylmethylphenols require their quantification in real samples. Glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNTs) and electropolymerized thymolphthalein has been developed for the sensitive quantification of isopropylmethylphenols. Conditions of thymolphthalein electropolymerization (monomer concentration, number of cycles, and electrolysis parameters) providing the best response to thymol have been found. Scanning electron microscopy and electrochemical methods confirm the effectivity of the electrode developed. The linear dynamic ranges of 0.050-25 and 25-100 µM for thymol and 0.10-10 and 10-100 µM for carvacrol with detection limits of 0.037 and 0.063 µM, respectively, have been achieved in differential pulse mode in Britton-Robinson buffer pH 2.0. The selectivity of the isopropylmethylphenols response in the presence of typical interferences (inorganic ions, saccharides, ascorbic acid) and other phenolics (caffeic, chlorogenic, gallic and rosmarinic acids, and quercetin) is a significant advantage over other electrochemical methods. The electrode has been used in the analysis of oregano and thyme spices. Total isopropylmethylphenols contents have been evaluated after a single sonication-assisted extraction with methanol.

Second-order electrochemical data generation to quantify carvacrol in oregano essential oils

A novel analytical method using voltammetric second-order modeling based on multivariate curve resolution-alternating least-square (MCR-ALS) is presented for the first time for the quantitation of carvacrol (CAR) in oregano essential oils (OEO). The second-order cyclic voltammetry data were generated on the basis that CAR shows a diffusional system. Thus, the scan rate (v) was used as a second instrumental mode and cyclic voltammograms at different v were acquired for a single sample, generating the second-order data. CAR determination was performed in presence of thymol, included as a potential interferent. Results demonstrated that MCR-ALS successfully exploited the second-order advantage and the recoveries were not statistically different than 100%. The limits of detection and quantitation were estimated using the MCR-ALS which were 6.27 × 10^-5°mol°L^-1°and 1.90 × 10^-4°mol L^-1, respectively. Finally, the developed methodology was implemented to quantify of CAR in OEO samples.

The RIFM approach to evaluating Natural Complex Substances (NCS)

The Research Institute for Fragrance Materials, Inc. (RIFM) has evaluated safety data for fragrance materials for 55 years. The safety assessment of Natural Complex Substances (NCS) is similar to that of discrete fragrance materials; all of the same endpoints are evaluated. A series of decision trees, reflecting advances in risk assessment approaches of mixtures and toxicological methodologies, follows a tiered approach for each endpoint using a 4-step process with testing only as a last resort: 1) evaluate available data on NCS; 2) verify whether the Threshold of Toxicological Concern (TTC) can be applied; 3) verify whether the NCS risk assessment can be achieved on a component basis; and 4) determine whether data must be generated. Using in silico tools, RIFM examined NCS similarities based on the plant part, processing, and composition of materials across 81 plant families to address data gaps. Data generated from the Creme RIFM Aggregate Exposure Model for over 900 fragrance NCS demonstrate that dermal exposure is the primary route of human exposure for NCS fragrance uses. Over a third of materials are below the most conservative TTC limits. This process aims to provide a comprehensive Safety Assessment of NCS used as a fragrance ingredient.