Dosimetric evaluation of nuclear interaction models in the Geant4 Monte Carlo simulation toolkit for carbon-ion radiotherapy

Report of a National Cancer Institute special panel: Characterization of the physical parameters of particle beams for biological research

PURPOSE

To define the physical parameters needed to characterize a particle beam in order to allow intercomparison of different experiments performed using different ions at the same facility and using the same ion at different facilities.

METHODS

At the request of the National Cancer Institute (NCI), a special panel was convened to review the current status of the field and to provide suggested metrics for reporting the physical parameters of particle beams to be used for biological research. A set of physical parameters and measurements that should be performed by facilities and understood and reported by researchers supported by NCI to perform pre-clinical radiobiology and medical physics of heavy ions were generated.

RESULTS

Standard measures such as radiation delivery technique, beam modifiers used, nominal energy, field size, physical dose and dose rate should all be reported. However, more advanced physical measurements, including detailed characterization of beam quality by microdosimetric spectrum and fragmentation spectra, should also be established and reported. Details regarding how such data should be incorporated into Monte Carlo simulations and the proper reporting of simulation details are also discussed.

CONCLUSIONS

In order to allow for a clear relation of physical parameters to biological effects, facilities and researchers should establish and report detailed physical characteristics of the irradiation beams utilized including both standard and advanced measures. Biological researchers are encouraged to actively engage facility staff and physicists in the design and conduct of experiments. Modeling individual experimental setups will allow for the reporting of the uncertainties in the measurement or calculation of physical parameters which should be routinely reported.

Production of the PET isotope 11C in hadron therapy via neutron knockout

PURPOSE

Positron emitting isotopes such as ¹¹C and ¹⁰C can be used for vital dose verification in hadron therapy. These isotopes are produced when the high energy ¹²C primary beam particles undergo nuclear reactions within the patient.

METHODS

We discuss a model for calculating cross sections for the production ¹¹C in ¹²C+¹²C collisions, applicable at hadron therapy energies.

RESULTS

Good agreement with the available cross section measurements is found for ¹²C(-1n), though more detailed, systematic measurements would be very valuable.

CONCLUSIONS

Nuclear structure plays a crucial role in the reactions of light nuclei, particularly when those reactions are peripheral and involve only a few nucleons. For such reactions, nuclear structure has a strong influence on the energy and angular distribution of the cross section, and is an important consideration for reliable dose verification using ¹¹C in hadron therapy.

Nuclear physics in particle therapy: a review

Charged particle therapy has been largely driven and influenced by nuclear physics. The increase in energy deposition density along the ion path in the body allows reducing the dose to normal tissues during radiotherapy compared to photons. Clinical results of particle therapy support the physical rationale for this treatment, but the method remains controversial because of the high cost and of the lack of comparative clinical trials proving the benefit compared to x-rays. Research in applied nuclear physics, including nuclear interactions, dosimetry, image guidance, range verification, novel accelerators and beam delivery technologies, can significantly improve the clinical outcome in particle therapy. Measurements of fragmentation cross-sections, including those for the production of positron-emitting fragments, and attenuation curves are needed for tuning Monte Carlo codes, whose use in clinical environments is rapidly increasing thanks to fast calculation methods. Existing cross sections and codes are indeed not very accurate in the energy and target regions of interest for particle therapy. These measurements are especially urgent for new ions to be used in therapy, such as helium. Furthermore, nuclear physics hardware developments are frequently finding applications in ion therapy due to similar requirements concerning sensors and real-time data processing. In this review we will briefly describe the physics bases, and concentrate on the open issues.

Design of ridge filters for spread-out Bragg peaks with Monte Carlo simulation in carbon ion therapy

Spread-out Bragg peaks made by ridge filters or wheel range modulators are used in charged particle therapy with passive methods to achieve uniform biological responses in irradiated tumors. Following the biological responses needed to design the ridge filters, which were developed at the National Institute of Radiological Sciences in Japan, new ridge filters were designed using recent developments in heavy-ion reactions and dosimetry. The Monte Carlo code of Geant4 was used to calculate the qualities of carbon ion beams in a water phantom. The results obtained from the simulation were corrected so that they agreed with the measurements of depth dose distributions. The calculations of biological responses to fragments other than carbon ions were assumed to be for helium ions. The measured dose distributions with the designed ridge filters were compared to the calculated distributions. A beam modifying system using this adaptable method was successively applied to carbon ion therapy at Gunma University.

Heavy-Particle Radiotherapy: System Design and Application

The requirements for an accelerator and a beam-delivery system for medical application are described (pointing out terms of heavy-particle radiotherapy), based on 15 years of experience with carbon-ion radiotherapy at HIMAC. The present heavy-particle radiotherapy and system are reviewed here. With a view to further development of carbon-ion radiotherapy, recent progress in heavy-particle radiotherapy and a new system are also described. Finally, the clinical applications are summarized.

Field size effect of radiation quality in carbon therapy using passive method

The authors have investigated the dependency of radiation quality and absorbed dose on radiation field size in therapeutic carbon beams. The field size of the broad beam, formed using the passive technique, was controlled from 20 to 100 mm per side with a multileaf collimator. The absorbed dose and radiation quality on the beam center were evaluated at several depths in a water phantom using microdosimetric technique in experiments and Monte Carlo simulations. With an increase in the field size, the radiation quality was reduced, although the absorbed dose grew at the center of the field. This indicates that the dose and radiation quality at the center of the broad beam are influenced by particles from the off-center region via large-angle scattering and that such particles have relatively low radiation quality and mainly consist of fragment particles. Because such a tendency appeared to be more remarkable in the deeper region of the water phantom, it is likely that fragment particles that are born in a water phantom have a marked role in determining the field size effect.