Simultaneous detection of Salmonella spp., Pseudomonas aeruginosa, Bacillus cereus, and Escherichia coli O157:H7 in environmental water using PMA combined with mPCR

Review of Detection Limits for Various Techniques for Bacterial Detection in Food Samples

Foodborne illnesses can be infectious and dangerous, and most of them are caused by bacteria. Some common food-related bacteria species exist widely in nature and pose a serious threat to both humans and animals; they can cause poisoning, diseases, disabilities and even death. Rapid, reliable and cost-effective methods for bacterial detection are of paramount importance in food safety and environmental monitoring. Polymerase chain reaction (PCR), lateral flow immunochromatographic assay (LFIA) and electrochemical methods have been widely used in food safety and environmental monitoring. In this paper, the recent developments (2013-2023) covering PCR, LFIA and electrochemical methods for various bacterial species (Salmonella, Listeria, Campylobacter, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli)), considering different food sample types, analytical performances and the reported limit of detection (LOD), are discussed. It was found that the bacteria species and food sample type contributed significantly to the analytical performance and LOD. Detection via LFIA has a higher average LOD (24 CFU/mL) than detection via electrochemical methods (12 CFU/mL) and PCR (6 CFU/mL). Salmonella and E. coli in the Pseudomonadota domain usually have low LODs. LODs are usually lower for detection in fish and eggs. Gold and iron nanoparticles were the most studied in the reported articles for LFIA, and average LODs were 26 CFU/mL and 12 CFU/mL, respectively. The electrochemical method revealed that the average LOD was highest for cyclic voltammetry (CV) at 18 CFU/mL, followed by electrochemical impedance spectroscopy (EIS) at 12 CFU/mL and differential pulse voltammetry (DPV) at 8 CFU/mL. LOD usually decreases when the sample number increases until it remains unchanged. Exponential relations (R2 > 0.95) between LODs of Listeria in milk via LFIA and via the electrochemical method with sample numbers have been obtained. Finally, the review discusses challenges and future perspectives (including the role of nanomaterials/advanced materials) to improve analytical performance for bacterial detection.

Rapid, sensitive, and user-friendly detection of Pseudomonas aeruginosa using the RPA/CRISPR/Cas12a system

BACKGROUND

Pseudomonas aeruginosa (P. aeruginosa) is a life-threatening bacterium known for its rapid development of antibiotic resistance, posing significant challenges in clinical treatment, biosecurity, food safety, and environmental monitoring. Early and accurate identification of P. aeruginosa is crucial for effective intervention.

METHODS

The lasB gene of P. aeruginosa was selected as the target for the detection. RPA primers for recombinase polymerase amplification (RPA) and crRNA for CRISPR/Cas12a detection were meticulously designed to target specific regions within the lasB gene. The specificity of the RPA/CRISPR/Cas12a detection platform was assessed using 15 strains. The detection limit of RPA/CRISPR/Cas12a detection platform was determined by utilizing a pseudo-dilution series of the P. aeruginosa DNA. The practical applicability of the RPA/CRISPR/Cas12a detection platform was validated by comparing it with qPCR on 150 samples (35 processed meat product samples, 55 cold seasoned vegetable dishes, 60 bottled water samples).

RESULTS

The RPA/CRISPR/Cas12a detection platform demonstrates high specificity, with no cross-reactivity with non-P. aeruginosa strains. This assay exhibits remarkable sensitivity, with a limit of detection (LOD) of 100 copies/µL for fluorescence assay and 101 copies/µL for the LFTS method. Furthermore, the performance of the RPA/CRISPR/Cas12a detection platform is comparable to that of the well-established qPCR method, while offering advantages such as shorter reaction time, simplified operation, and reduced equipment requirements.

CONCLUSIONS

The RPA/CRISPR/Cas12a detection platform presents a straightforward, accurate, and sensitive approach for early P. aeruginosa detection and holds great promise for diverse applications requiring rapid and reliable identification.

Real-time and visual detection of viable Salmonella in milk by a competitive annealing mediated isothermal amplification (CAMP) combined with propidium monoazide (PMA)

Salmonella is a common pathogen in raw milk. The conventional isothermal amplification assay cannot distinguish viable bacteria from dead bacteria, which may cause false positive results or overestimate the number of viable bacteria. This study proposed a competitive annealing mediated isothermal amplification (CAMP) combined with propidium monoazide (PMA) for real-time and visual detection of viable Salmonella in milk. Based on the invA gene, specific CAMP primers were constructed. Moreover, the primers for accelerating the CAMP reaction were also designed and added to the reaction system. The real-time PMA-CAMP showed a LOD of 10² CFU mL^-1 for quantitative detection of viable Salmonella in spiked milk samples, and the recovery rate was 80-106%. The visual PMA-CAMP can be performed under isothermal conditions using a portable dry bath, and the positive results can be directly observed by the colorimetric change from violet to sky blue. Without enrichment step, viable Salmonella could be detected with a LOD of 10² CFU mL^-1. With enrichment step, even if the initial inoculation level is 1 CFU mL^-1, the visual PMA-CAMP could still detect the presence of viable Salmonella in milk samples. Therefore, the developed PMA-CAMP assays are suitable for the monitoring of viable Salmonella contamination in milk.

Simultaneous detection of viable Salmonella spp., Escherichia coli, and Staphylococcus aureus in bird's nest, donkey-hide gelatin, and wolfberry using PMA with multiplex real-time quantitative PCR

Salmonella spp., Escherichia coli, and Staphylococcus aureus are common microbial contaminants within the homology of medicine and food that can cause serious food poisoning. This study describes a highly efficient, sensitive, specific, and simple multiplex real-time quantitative PCR (mRT-qPCR) method for the simultaneous detection of viable Salmonella spp., E. coli, and S. aureus. Primers and probes were designed for the amplification of the target genes invA, uidA, and nuc. Dead bacterial genetic material was excluded by propidium monoazide (PMA) treatment, facilitating the detection of only viable bacteria. This method was capable of detecting Salmonella spp., E. coli, and S. aureus at 102, 102, and 101 CFU/ml, respectively, in pure culture. PMA combined with mRT-qPCR can reliably distinguish between dead and viable bacteria with recovery rates from 95.7% to 105.6%. This PMA-mRT-qPCR technique is a highly sensitive and specific method for the simultaneous detection of three pathogens within the homology of medicine and food.

An Assay Combining Droplet Digital PCR With Propidium Monoazide Treatment for the Accurate Detection of Live Cells of Vibrio vulnificus in Plasma Samples

Vibrio vulnificus (V. vulnificus) is one of the most common pathogenic Vibrio species to humans; therefore, the establishment of timely and credible detection methods has become an urgent requirement for V. vulnificus illness surveillance. In this study, an assay combining droplet digital PCR (ddPCR) with propidium monoazide (PMA) treatment was developed for detecting V. vulnificus. The primers/probes targeting the V. vulnificus hemolysin A (vvhA) gene, amplification procedures, and PMA processing conditions involved in the assay were optimized. Then, we analyzed the specificity, sensitivity, and ability to detect live cell DNA while testing the performance of PMA-ddPCR in clinical samples. The optimal concentrations of primers and probes were 1.0 and 0.3 μM, respectively. The annealing temperature achieving the highest accuracy in ddPCR assay was 60°C. With an initial V. vulnificus cell concentration of 10⁸ CFU/mL (colony-forming units per milliliter), the optimal strategy to distinguish live cells from dead cells was to treat samples with 100 μM PMA for 15 min in the dark and expose them to LED light with an output wavelength of 465 nm for 10 min. The specificity of the PMA-ddPCR assay was tested on 27 strains, including seven V. vulnificus strains and 20 other bacterial strains. Only the seven V. vulnificus strains were observed with positive signals in specificity analysis. Comparative experiments on the detection ability of PMA-ddPCR and PMA-qPCR in pure cultures and plasma samples were performed. The limit of detection (LOD) and the limit of quantitation (LOQ) in pure culture solutions of V. vulnificus were 29.33 and 53.64 CFU/mL in PMA-ddPCR, respectively. For artificially clinical sample tests in PMA-ddPCR, V. vulnificus could be detected at concentrations as low as 65.20 CFU/mL. The sensitivity of the PMA-ddPCR assay was 15- to 40-fold more sensitive than the PMA-qPCR in this study. The PMA-ddPCR assay we developed provides a new insight to accurately detect live cells of V. vulnificus in clinical samples, which is of great significance to enhance public health safety and security capability and improve the emergency response level for V. vulnificus infection.

Rapid-Response Magnetic Enrichment Strategy for Significantly Improving Sensitivity of Multiplex PCR Analysis of Pathogenic Listeria Species

Listeria monocytogenes and Listeria ivanovii are important pathogenic Listeria spp. that cause infections in humans and animals. Establishing a rapid and sensitive method for the simultaneous screening of pathogenic Listeria spp. is of great significance for ensuring food safety. Multiplex polymerase chain reaction (mPCR) has been extensively reported to simultaneously detect several pathogens in food with high sensitivity, but a time-consuming pre-enrichment process is necessary. In this study, we report the usage of surface-modified polyethyleneimine-coated positively charged magnetic nanoparticles (PEI-MNPs) for rapid enrichment of pathogenic Listeria spp. through electrostatic interactions. The enrichment process takes only 10 min with high capture efficiency (more than 70%) at a wide pH range and ionic strength. Combined with mPCR analysis, the PEI-MNPs-mPCR strategy can simultaneously, rapidly, and sensitively detect pathogenic Listeria spp. without a time-consuming pre-concentration process. Under the optimal conditions, the detection limits of L. monocytogenes and L. ivanovii in lettuce were both as low as 101 CFU/mL, which was a hundred times lower than that without magnetic enrichment. In conclusion, the magnetic enrichment strategy based on charge interaction combined with mPCR analysis has great application potential in shortening the pre-concentration time of foodborne pathogens and improving the detection sensitivity.

Molecular Diagnostic Tools Applied for Assessing Microbial Water Quality

Microbial water quality is of vital importance for human, animal, and environmental health. Notably, pathogenically contaminated water can result in serious health problems, such as waterborne outbreaks, which have caused huge economic and social losses. In this context, the prompt detection of microbial contamination becomes essential to enable early warning and timely reaction with proper interventions. Recently, molecular diagnostics have been increasingly employed for the rapid and robust assessment of microbial water quality implicated by various microbial pollutants, e.g., waterborne pathogens and antibiotic-resistance genes (ARGs), imposing the most critical health threats to humans and the environment. Continuous technological advances have led to constant improvements and expansions of molecular methods, such as conventional end-point PCR, DNA microarray, real-time quantitative PCR (qPCR), multiplex qPCR (mqPCR), loop-mediated isothermal amplification (LAMP), digital droplet PCR (ddPCR), and high-throughput next-generation DNA sequencing (HT-NGS). These state-of-the-art molecular approaches largely facilitate the surveillance of microbial water quality in diverse aquatic systems and wastewater. This review provides an up-to-date overview of the advancement of the key molecular tools frequently employed for microbial water quality assessment, with future perspectives on their applications.

How to Evaluate Non-Growing Cells-Current Strategies for Determining Antimicrobial Resistance of VBNC Bacteria

Thanks to the achievements in sanitation, hygiene practices, and antibiotics, we have considerably improved in our ongoing battle against pathogenic bacteria. However, with our increasing knowledge about the complex bacterial lifestyles and cycles and their plethora of defense mechanisms, it is clear that the fight is far from over. One of these resistance mechanisms that has received increasing attention is the ability to enter a dormancy state termed viable but non-culturable (VBNC). Bacteria that enter the VBNC state, either through unfavorable environmental conditions or through potentially lethal stress, lose their ability to grow on standard enrichment media, but show a drastically increased tolerance against antimicrobials including antibiotics. The inability to utilize traditional culture-based methods represents a considerable experimental hurdle to investigate their increased antimicrobial resistance and impedes the development and evaluation of effective treatments or interventions against bacteria in the VBNC state. Although experimental approaches were developed to detect and quantify VBNCs, only a few have been utilized for antimicrobial resistance screening and this review aims to provide an overview of possible methodological approaches.