An antibody-based microarray assay for the simultaneous detection of aflatoxin B1 and fumonisin B1

Aptamer-based detection of fumonisin B1: A critical review

Mycotoxin contamination is a current issue affecting several crops and processed products worldwide. Among the diverse mycotoxin group, fumonisin B1 (FB1) has become a relevant compound because of its adverse effects in the food chain. Conventional analytical methods previously proposed to quantify FB1 comprise LC-MS, HPLC-FLD and ELISA, while novel approaches integrate different sensing platforms and fluorescently labelled agents in combination with antibodies. Nevertheless, such methods could be expensive, time-consuming and require experience. Aptamers (ssDNA) are promising alternatives to overcome some of the drawbacks of conventional analytical methods, their high affinity through specific aptamer-target binding has been exploited in various designs attaining favorable limits of detection (LOD). So far, two aptamers specific to FB1 have been reported, and their modified and shortened sequences have been explored for a successful target quantification. In this critical review spanning the last eight years, we have conducted a systematic comparison based on principal component analysis of the aptamer-based techniques for FB1, compared with chromatographic, immunological and other analytical methods. We have also conducted an in-silico prediction of the folded structure of both aptamers under their reported conditions. The potential of aptasensors for the future development of highly sensitive FB1 testing methods is emphasized.

Highly Sensitive Simultaneous Detection of Multiple Mycotoxins Using a Protein Microarray on a TiO2-Modified Porous Silicon Surface

A new protein microarray method for multiplex mycotoxin detection in parallel has been established on a stable TiO₂-modified porous silicon (PSi) surface. A typical competitive immunoassay microarray protocol has been developed for simultaneous detection of multiplex mycotoxins including aflatoxin B₁ (AFB₁), ochratoxin A (OTA), and fumonisin B₁ (FB₁) on the TiO₂-PSi surface. The epoxy groups were selected to modify the surface of a TiO₂-PSi wafer for the immobilization of artificial antigens of mycotoxins because of their high signal-to-noise ratios. Under optimal conditions, the developed method showed wide linear detection ranges of 0.01-1 ng/mL for OTA, 0.001-1 ng/mL for AFB₁, and 0.01-1 ng/mL for FB₁ and low limit of detections (LODs) of 0.433 ng/mL for OTA, 0.243 ng/mL for AFB₁, and 0.093 ng/mL for FB₁. The microarray method can specifically identify the three mycotoxins and their analogues. The recovery rates in real samples were within 75-120%, which were in agreement with that of the classical ELISA method. The new method has great application potential for rapid, sensitive, and high-throughput screening of multiplex mycotoxins and other target molecules.

Rapid and sensitive detection of mycotoxins by advanced and emerging analytical methods: A review

Quantification of mycotoxins in foodstuffs is extremely difficult as a limited amount of toxins are known to be presented in the food samples. Mycotoxins are secondary toxic metabolites, made primarily by fungal species, contaminating feeds and foods. Due to the presence in globally used grains, it is an unpreventable problem that causes various acute and chronic impacts on human and animal health. Over the previous few years, however, progress has been made in mycotoxin analysis studies. Easier techniques of sample cleanup and advanced chromatographic approaches have been developed, primarily high-performance liquid chromatography. Few extremely sophisticated and adaptable tools such as high-resolution mass spectrometry and gas chromatography-tandem MS/MS have become more important. In addition, Immunoassay, Advanced quantitative techniques are now globally accepted for mycotoxin analysis. Thus, this review summarizes these traditional and highly advance methods and their characteristics for evaluating mycotoxins.

New biorecognition molecules in biosensors for the detection of toxins

Biological and synthetic recognition elements are at the heart of the majority of modern bioreceptor assays. Traditionally, enzymes and antibodies have been integrated in the biosensor designs as a popular choice for the detection of toxin molecules. But since 1970s, alternative biological and synthetic binders have been emerged as a promising alternative to conventional biorecognition elements in detection systems for laboratory and field-based applications. Recent research has witnessed immense interest in the use of recombinant enzymatic methodologies and nanozymes to circumvent the drawbacks associated with natural enzymes. In the area of antibody production, technologies based on the modification of in vivo synthesized materials and in vitro approaches with development of "display "systems have been introduced in the recent years. Subsequently, molecularly-imprinted polymers and Peptide nucleic acid (PNAs) were developed as an attractive receptor with applications in the area of sample preparation and detection systems. In this article, we discuss all alternatives to conventional biomolecules employed in the detection of various toxin molecules We review recent developments in modified enzymes, nanozymes, nanobodies, aptamers, peptides, protein scaffolds and DNazymes. With the advent of nanostructures and new interface materials, these recognition elements will be major players in future biosensor development.

Development of a sensitive, competitive, indirect ELISA for the detection of fumonisin B1 in corn originating from Anhui province, China

Fumonisin B₁ (FB₁) is a secondary metabolite produced by Fusarium verticillioides or Fusarium proliferatum, which present in food and feed. It causes hazardous effects on human and animal health. A monoclonal antibody (mAb) against FB₁ was produced and a simple, reliable and sensitive, competitive, indirect enzyme-linked immunosorbent assay (ci-ELISA) for detection of FB₁ was developed and the experiment conditions were optimized. The coating concentration of FB₁-ovalbumin (FB₁-OVA) was 500 ng mL^-1, the action concentrations of anti-FB₁ mAb and goat anti-mouse IgG were 1.28 × 10⁴ and 1:5000, respectively. The 50% inhibitory concentration (IC₅₀) was 11 ng mL^-1, with a detectable range of 1.25-250 ng mL^-1, and a limit of determination (LOD) of 1.15 ng mL^-1. The cross-reactivity (CR) of the antibody against fumonisin B₂ (FB₂) was 60.4, and <1% against deoxynivalenol (DON), aflatoxin B₁ (AFB₁), ochratoxin A (OTA) or zearalenone (ZEN). In spiked samples (250 ng g^-1, 500 ng g^-1, 1000 ng g^-1), the mean recoveries ranged from 86.7 ± 5% to 102 ± 4%, and the coefficient of variation (CV) ranged from 3% to 10%. A survey of 96 corn samples from Bozhou, Fuyang, Bengbu, and Hefei, in Anhui province, China, was performed. Frequencies of FB₁ contamination were 83.3%, 95.8%, 20.8% and 91.7%, and the mean concentrations of positive samples were 0.702 μg kg^-1, 0.883 μg kg^-1, 0.074 μg kg^-1, and 0.276 μg kg^-1, respectively. The results of this study suggest that the ci-ELISA developed in this study can be used to identify FB₁ in corn, furthermore, further study is needed to investigate FB₁ contamination in food and feed to prevent its harmful health effects.

Analytical methods for determination of mycotoxins: An update (2009-2014)

Mycotoxins are a problematic and toxic group of small organic molecules that are produced as secondary metabolites by several fungal species that colonise crops. They lead to contamination at both the field and postharvest stages of food production with a considerable range of foodstuffs affected, from coffee and cereals, to dried fruit and spices. With wide ranging structural diversity of mycotoxins, severe toxic effects caused by these molecules and their high chemical stability the requirement for robust and effective detection methods is clear. This paper builds on our previous review and summarises the most recent advances in this field, in the years 2009-2014 inclusive. This review summarises traditional methods such as chromatographic and immunochemical techniques, as well as newer approaches such as biosensors, and optical techniques which are becoming more prevalent. A section on sampling and sample treatment has been prepared to highlight the importance of this step in the analytical methods. We close with a look at emerging technologies that will bring effective and rapid analysis out of the laboratory and into the field.

Highly Sensitive FRET-Based Fluorescence Immunoassay for Detecting of Aflatoxin B1 Using Magnetic/Silica Core-Shell as a Signal Intensifier

BACKGROUND

Recently, some new nanobiosensors using different nanoparticles or microarray systems for detection of mycotoxins have been designed . However, rapid, sensitive and early detection of aflatoxicosis would be very helpful to distinguish high-risk persons.

OBJECTIVES

We report a highly sensitive competitive immunoassay using magnetic/silica core shell as a signal intensifier for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from Cd/Te quantum dots (antiaflatoxin B1 antibody immobilized on the surface of Cd/Te quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The specific immune-reaction between the anti-aflatoxin B1 antibody on the QDs and the labeledaflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photo-excitation of the QDs. Using magnetic/silica core shell to intensify the obtained signal is the novelty of this study.

MATERIALS AND METHODS

Cd/Te QDs were synthesized by the simultaneous reduction of cadmium chloride and tellurium in the presence of sodium borohydride under nitrogen atmosphere. Magnetic nanoparticles were synthesized using FeSO₄ and FeCl₃ (1:2 molar ratio) and ammonia as an oxidizing agent under nitrogen atmosphere. The prepared magnetic nanoparticles shelled by silica using tetraethoxysilane in the presence of ammonia. Nanoparticles synthesis and monodispersity confirmed by TEM. Immobilization of Cd/Te QDs to antibodies and labeling of aflatoxin B1-albumin by Rho 123 were performed by EDC/NHS reaction in reaction mixture buffer, pH 6, at room temperature.

RESULTS

By using the magnetic/silica core shell sensitivity of the system changed from 2×10^-11 in our previous study to 2×10^-12 in this work. The feasibility of the method established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the decreased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spiked samples, over the range of 0.01-0.06 μmol.mL^-1.

CONCLUSIONS

This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require multiple separation steps and excessive washing.

Immunochemical methods for ochratoxin A detection: a review

The safety of food and feed depends to a great deal on quality control. Numerous compounds and organisms may contaminate food and feed commodities and thus pose a health risk for consumers. The compound of interest in this review is ochratoxin A (OTA), a secondary metabolite of the fungi Aspergillus and Penicillium. Due to its adverse health effects, detection and quantification are of utmost importance. Quality control of food and feed requires extraction and analysis, including TLC, HPLC, MS, and immunochemical methods. Each of these methods has its advantages and disadvantages. However, with regard to costs and rapidity, immunochemical methods have gained much interest in the last decade. In this review an introduction to immunochemistry and assay design will be given to elucidate the principles. Further, the application of the various formats to the detection and quantification of ochratoxin will be described, including the use of commercially available kits.

Multiplex bioanalytical methods for food and environmental monitoring

Recent advances in miniaturization of analytical systems and newly emerging technologies offer platforms with greater automation and multiplexing capabilities than traditional biological binding assays. Multiplexed bioanalytical techniques provide control agencies and food industries with new possibilities for improved, more efficient monitoring of food and environmental contaminants. This review deals with recent developments in planar-array and suspension-array technologies, and their applications in detecting pathogens, food allergens and adulterants, toxins, antibiotics and environmental contaminants.

Immunomagnetic microbeads for screening with flow cytometry and identification with nano-liquid chromatography mass spectrometry of ochratoxins in wheat and cereal

Multi-analyte binding assays for rapid screening of food contaminants require mass spectrometric identification of compound(s) in suspect samples. An optimal combination is obtained when the same bioreagents are used in both methods; moreover, miniaturisation is important because of the high costs of bioreagents. A concept is demonstrated using superparamagnetic microbeads coated with monoclonal antibodies (Mabs) in a novel direct inhibition flow cytometric immunoassay (FCIA) plus immunoaffinity isolation prior to identification by nano-liquid chromatography–quadrupole time-of-flight-mass spectrometry (nano-LC-Q-ToF-MS). As a model system, the mycotoxin ochratoxin A (OTA) and cross-reacting mycotoxin analogues were analysed in wheat and cereal samples, after a simple extraction, using the FCIA with anti-OTA Mabs. The limit of detection for OTA was 0.15 ng/g, which is far below the lowest maximum level of 3 ng/g established by the European Union. In the immunomagnetic isolation method, a 350-times-higher amount of beads was used to trap ochratoxins from sample extracts. Following a wash step, bound ochratoxins were dissociated from the Mabs using a small volume of acidified acetonitrile/water (2/8 v/v) prior to separation plus identification with nano-LC-Q-ToF-MS. In screened suspect naturally contaminated samples, OTA and its non-chlorinated analogue ochratoxin B were successfully identified by full scan accurate mass spectrometry as a proof of concept for identification of unknown but cross-reacting emerging mycotoxins. Due to the miniaturisation and bioaffinity isolation, this concept might be applicable for the use of other and more expensive bioreagents such as transport proteins and receptors for screening and identification of known and unknown (or masked) emerging food contaminants.

Figure

Developments in mycotoxin analysis: an update for 2009-2010

This review highlights developments in mycotoxin analysis and sampling over a period between mid-2009 and mid-2010. It covers the major mycotoxins aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxin, patulin, trichothecenes, and zearalenone. New and improved methods for mycotoxins continue to be published. Immunological-based method developments continue to be of wide interest in a broad range of formats. Multimycotoxin determination by LC-MS/MS is now being targeted at the specific ranges of mycotoxins and matrices of interest or concern to the individual laboratory. Although falling outside the main emphasis of the review, some aspects of natural occurrence have been mentioned, especially if linked to novel method developments.

Development of a multiplex flow cytometric microsphere immunoassay for mycotoxins and evaluation of its application in feed

A multi-mycotoxin immunoassay—using the MultiAnalyte Profiling (xMAP) technology—is developed and evaluated. This technology combines a unique color-coded microsphere suspension array, with a dedicated flow cytometer. We aimed for the combined detection of aflatoxins, ochratoxin A, deoxynivalenol, fumonisins, zearalenone and T-2-toxin in an inhibition immunoassay format. Sets of six mycotoxin-protein conjugates and six specific monoclonal antibodies were selected, and we observed good sensitivities and no cross-interactions between the assays in buffer. However, detrimental effects of the feed extract on the sensitivities and in some cases on the slopes of the curves were observed and different sample materials showed different effects. Therefore, for quantitative analysis, this assay depends on calibration curves in blank matrix extracts or on the use of a suitable multi-mycotoxin cleanup. To test if the method was suitable for the qualitative detection at EU guidance levels, we fortified rapeseed meal, a feed ingredient, with the six mycotoxins, and all extracts showed inhibited responses in comparison with the non-fortified sample extract. Contaminated FAPAS reference feed samples assigned for a single mycotoxin showed strong inhibitions in the corresponding assays but also often in other assays of the multiplex. In most cases, the presence of these other mycotoxins was confirmed by instrumental analysis. The multiplex immunoassay can be easily extended with other mycotoxins of interest, but finding a suitable multi-mycotoxin cleanup will improve its applicability.