Characterisation and Antibacterial Properties of Novel Biodegradable Films Based on Alginate and Roselle (Hibiscus sabdariffa L.) Extract

Preservation of freshly-cut lemon slices using alginate-based coating functionalized with antioxidant enzymatically hydrolyzed rice straw-hemicellulose

Food coatings are efficient preservative measures, a crucially needed approach to meet hunger growth as well as food management. In the current study, the construction of an efficient coating using alginate polymer fortified with antioxidant rice straw-hemicellulose hydrolysate was examined. Rice straw hemicellulose fraction was extracted under thermal alkaline conditions with a recovery percentage of 15.8%. The extracted hemicellulose fraction was enzymatically hydrolyzed with microbial xylanase with hydrolysis percentage of 53.8%. Characterization of the produced hydrolysate was performed with the aid of thin layer chromatographic analysis (TLC), high-performance liquid chromatographic analysis (HPLC), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) analysis. The reported data showed that xylobiose (240.68 mg/g) in addition to coumaric (383.33 µg/g) and ferulic acid (298.77 µg/g) as the main constituents of the carbohydrate and the polyphenolic contents, respectively. The hydrolysate possessed antioxidant capacity that significantly increased in a direct correlation with the concentration of the hydrolysate. Finally, the prepared coating solution effectiveness in the preservation of lemon slices against fungal growth was monitored up to 20 days with a significant concentration dependent decrease in weight loss and an increase in its antioxidant activity. The combination of xylooligosaccharide-rich rice straw hydrolysate with alginate-based coating not only improved the storage shelf-life of fresh fruits and vegetables but also provided microbial safety and potential benefits for human health.

Advances in Hydrogel Polymers for Microbial Control in Water Systems

Every year, contaminated water is responsible for over one million deaths globally. Microbiology leads other fields in the development of solutions to water contamination to reduce these deaths while advancing the achievement of SDG 6, which aims to ensure universal access to water and sanitation. This article explores hydrogel polymers as a solution to water contamination through microbial control. Using a systematic approach, this study collects, reviews, analyzes, and synthesizes the findings of studies on the structure, properties, and mechanisms used by hydrogel polymers in pathogen control in water systems, emphasizing recent advances in microbiology that have improved the antimicrobial properties of hydrogel polymers, enhanced their synthetic properties, and improved their overall ability to control the spread of pathogens in water. Other additional notable findings, including the applications of hydrogel polymers in water systems, the environmental implications of using the method to decontaminate and purify water for various purposes, and the regulatory standards needed to reinforce the viability and effectiveness of the adaptation of hydrogel polymers for the control of harmful or unwanted microorganisms in water systems, inform the presented inferences on the future of hydrogel technologies and new opportunities for the expansion of their commercial use.

Antibacterial, antioxidant and fruit packaging ability of biochar-based silver nanoparticles-polyvinyl alcohol-chitosan composite film

Silver nanoparticles were prepared by loading Ag+ into biochar of waste barley distillers' grains shell by reduction with trisodium citrate, and this silver-loaded biochar was introduced into polyvinyl alcohol-chitosan. Various analysis with Fourier Transform Infrared spectroscopy, X-ray diffraction, Thermogravimetric analysis, and water contact angle revealed that biochar-based silver nanoparticle was incorporated into the polyvinyl alcohol-chitosan film, the biochar-based silver nanoparticles-polyvinyl alcohol-chitosan (C-Ag-loaded PVA/CS) composite film had good thermostability and hydrophobicity. Through the analysis via disk diffusion method, the composite containing 3 % of biochar-based silver nanoparticles-polyvinyl alcohol-chitosan had high antibacterial activity (inhibition zone: 18 mm against E. coli and 15 mm against S. aureus), and the bacterial membrane permeability was measured, indicating that C-Ag-loaded PVA/CS composite film could destroy the cell membrane, release intracellular substances, and have high antioxidant activity. During the storage, the weight loss rate of the biochar-based silver nanoparticles-polyvinyl alcohol-chitosan plastic wrap group was 0.14 %, and the titratable acid content only decreased by 0.061 %, which had a good effect on extending the shelf life of blueberries. The C-Ag-loaded PVA/CS composite film could also delay deterioration of blueberries and prolong storage time. Overall, this composite film had potential in food packaging and extending food shelf-life aspects.

Biodegradation of polysaccharide-based biocomposites with acetylated cellulose nanocrystals, alginate and chitosan in aqueous environment

Biocomposite films from renewable sources are seen to be viable candidates as sustainable, zero-waste packaging materials. In this study, biocomposites films using chitosan and alginate as matrices, and pristine or acetylated cellulose nanocrystals (CNCs) as reinforcement agents, were fabricated, thoroughly characterized in terms of structure (with ATR-FTIR and XRD), morphology (SEM), thermal stability (TGA coupled with FTIR), water content and solubility and mechanical properties and subjected to controlled biological degradation in aqueous environment with added activated sludge. Biodegradation activity was followed through respirometry by measurement of change in partial O2 pressure using OxiTop® system. While the initial rate of biodegradation is higher in chitosan-based films with incorporated CNCs (both pristine and modified) compared to any other tested biocomposites, it was observed that chitosan-based films are not completely degradable in activated sludge medium, whereas alginate-based films reached complete biodegradation in 107 h to 112 h. Additional study of the aqueous medium with in situ FTIR during biodegradation offered an insight into biodegradation mechanisms. Use of advanced statistical methods indicated that selection of material (ALG vs CH) has the highest influence on biodegradability, followed by solubility of the material and its thermal stability.

Recent advances in the production of bionanomaterials for development of sustainable food packaging: A comprehensive review

Polymers originating from natural macromolecule based polymeric materials have gained popularity due to the demand for green resources to develop unique, eco-friendly, and high-quality biopolymers. The objective of this review is to address the utilization of bionanomaterials to improve food quality, safety, security, and shelf life. Bionanomaterials are synthesized by integrating biological molecules with synthetic materials at the nanoscale. Nanostructured materials derived from biopolymers such as cellulose, chitin, or collagen can be employed for the development of sustainable food packaging. Green materials are cost-effective, biocompatible, biodegradable, and renewable. The interaction of nanoparticles with biological macromolecules must be analyzed to determine the properties of the packaging film. The nanoparticles control the growth of bacteria that cause food spoiling by releasing distinctive chemicals. Bio-nanocomposites and nanoencapsulation systems have been used in antimicrobial bio-based packaging solutions to improve the efficiency of synergism. Nanomaterials can regulate gas and moisture permeability, screen UV radiation, and limit microbial contamination, keeping the freshness and flavor of the food. Food packaging based on nanoparticles embedded biopolymers can alleviate environmental concerns by lowering the amount of packaging materials required and enhancing packaging recyclability. This results in less waste and a more eco-sustainable approach to food packaging. The study on current advances in the production of bionanomaterials for development of sustainable food packaging involves a detailed investigation of the available data from existing literature, as well as the compilation and analysis of relevant research results using statistical approaches.

Characterization of Sodium Alginate-Based Films Blended with Olive Leaf and Laurel Leaf Extracts Obtained by Ultrasound-Assisted Technology

Due to environmental concerns, there is an increasing need to reduce the use of synthetic and non-renewable packaging materials to reduce waste and increase sustainability. This study aimed to characterise sodium alginate edible-based films (SA) incorporated with laurel leaf extract (LLE) and olive leaf extract (OLE) obtained by ultrasound-assisted extraction. Determination of total phenolic content, antioxidant, and antimicrobial activity was performed for the extracts and films. Also, thickness, tensile strength, elongation at break, modulus of elasticity, opacity and colour, moisture content, water vapour permeability (WVP), Fourier-transform infrared spectroscopy (FTIR) spectra, and surface morphology by scanning electron microscope (SEM) analyses were performed for the films. LLE yielded better results in terms of phenolic content (195 mg GAE/g), antioxidant (2.1 TE/g extract) and antimicrobial activity (MIC at 1% for Listeria monocytogenes and Staphylococcus aureus, and 1.8% for Enterococcus faecalis). For the films, the simultaneous incorporation of LLE 1% (w/v) and OLE 1% (w/v) resulted in a significant reduction of approximately 2 log CFU/g against S. aureus. The addition of LLE and OLE extracts also proved to improve barrier properties (lower WVP for SA films with LLE 1% + OLE 1%, 3.49 × 10-11 g m-1 s-1 Pa-1) and promoted changes in resistance and flexibility. The results demonstrated that active alginate-based films can be valuable for enhancing food preservation.

Modulation of physicochemical properties and antimicrobial activity of sodium alginate films through the use of chestnut extract and plasticizers

Due to the growing demand for robust and environmentally friendly antimicrobial packaging materials, biopolymers have recently become extensively investigated. Although biodegradable biopolymers usually lack mechanical properties, which makes it inevitable to blend them with plasticizers. The purpose of this study was to investigate plasticization efficiency of bio-based plasticizers introduced into sodium alginate compositions containing chestnut extract and their effect on selected film properties, including primarily mechanical and antibacterial properties. The films were prepared by the casting method and sodium alginate was cross-linked with calcium chloride. Six different plasticizers, including three commercially available ones (glycerol, epoxidized soybean oil and palm oil) and three synthesized plasticizers that are mixtures of bio-based plasticizers, were used to compare their influence on the film properties. Interactions between the polymer matrix and the plasticizers were investigated using Fourier transform infrared spectroscopy. The morphological characteristics of the films were characterized by scanning electron microscopy. Thermal properties, tensile strength, elongation at break, hydrophilic, and barrier properties of the obtained films were also determined. To confirm the obtaining of active films through the use of chestnut extract and to study the effect of the proposed plasticizers on the antibacterial activity of the extract, the obtained films were tested against bacteria cultures. The final results showed that all of the obtained films exhibit a hydrophilic character and high barrier effect to oxygen, carbon dioxide and water vapor. In addition, sodium alginate films prepared with chestnut extract and the plasticizer proposed by us, showed better mechanical and antimicrobial properties than the films obtained with chestnut extract and the commercially available plasticizers.

Multifunction smart nanocomposite film for food packaging based on carboxymethyl cellulose/Kombucha SCOBY/pomegranate anthocyanin pigment

Active packing systems employed to preserve food quality have gone through chains of sustainable development processes, reflecting the growth in consumer awareness of high-quality foods in eco-friendly packaging. Consequently, this study aims to develop antioxidant, antimicrobial, UV-shielding, pH-sensitive, edible, and flexible films from composites of carboxymethyl cellulose (CMC), pomegranate anthocyanin extract (PAE), and various fractions (1-15 %) of bacterial cellulose from the Kombucha SCOBY (BC Kombucha). Various analytical tools such as ATR-FTIR, XRD, TGA, and TEM were utilized to investigate the physicochemical characterization of BC Kombucha and CMC-PAE/BC Kombucha films. The DDPH scavenging test demonstrated the efficiency of PAE as a matrix with potent antioxidant properties, both as a solution and enclosed in composite films. The fabricated films of CMC-PAE/BC Kombucha showed antimicrobial activities against many pathogenic Gram-negative (Pseudomonas aeruginosa, Salmonella sp., and Escherichia coli), Gram-positive (Listeria monocytogenes and Staphylococcus aureus) bacteria, and Candida albicans, ranging from a 20 to 30 mm inhibition zone. The CMC-PAE/BC Kombucha nanocomposite has additionally been utilized to pack red grapes and plums. The results illustrated that CMC-PAE/BC Kombucha nanocomposite can increase red grapes and plums' shelf lives by up to 25 days while maintaining the fruits' quality better than those left unpacked.

Design and evaluation of sodium alginate-based hydrogel dressings containing Betula utilis extract for cutaneous wound healing

Traditional wound dressings have a limited capacity to absorb exudates, are permeable to microbes, and may adhere to wounds, which leads to secondary injuries. Hydrogels are promising alternative dressings to overcome the above challenges. In this study, we developed sodium alginate-based hydrogel films loaded with Betula utilis bark extract. These films were prepared via solvent-casting crosslinking method and evaluated for wound healing activity. Prepared films were 0.05-0.083 mm thick, flexible with folding endurance ranging from 197-203 folds, which indicates good physical properties. Optimized formulations exhibited successful loading of extract in the film matrix without any interaction as confirmed by FTIR. Maximum zone of inhibition against Gram-positive and Gram-negative bacteria was achieved by optimum formulation (B6), i.e., 19 mm and 9 mm, respectively, with > 90% scavenging activity. Furthermore, this optimum formulation (B6) was able to achieve 93% wound contraction in rats. Histograms of the optimized formulation treated group also revealed complete reepithelization of wounds. Conclusively, our extract-loaded hydrogel dressing successfully demonstrated its potential for cutaneous wound healing.

Novel Active Food Packaging Films Based on Gelatin-Sodium Alginate Containing Beetroot Peel Extract

Currently, the exploration of natural colorants from vegetal waste has gained particular attention. Furthermore, incorporation of these natural sources into biopolymers is an encouraging environmentally friendly approach to establishing active films with biological activities for food packaging. The present study developed bioactive antioxidant films based on gelatin-sodium alginate (NaAlg) incorporated with aqueous beetroot peel extract (BPE). Firstly, the effects of combining gelatin-NaAlg and BPE at 0.25, 0.5, and 1% on the mechanical, physical, antioxidant, and antibacterial properties of the films were analyzed. With increasing BPE, mechanico-physical properties and antioxidant and anti-foodborne pathogen capacities were enhanced. Likewise, when added to gelatin-NaAlg films, BPE remarkably increased the instrumental color properties. Moreover, during 14 days of storage at 4 °C, the impact of gelatin-NaAlg coating impregnated with BPE on microbial and chemical oxidation and on the sensory characteristics of beef meat samples was periodically assessed. Interestingly, by the end of the storage, BPE at 1% limited the microbial deterioration, enhanced the instrumental color, delayed chemical oxidation, and improved sensory traits. By practicing chemometrics tools (principal component analysis and heat maps), all data provided valuable information for categorizing all samples regarding microbiological and oxidative properties, sensory features, and instrumental color. Our findings revealed the ability of gelatin-NaAlg with BPE as an antioxidant to be employed as food packaging for meat preservation.