Design of Electrochemical Sensor Based on fMWCNT-CPE Decorated with Ti Nanofilm and Its Electrocatalytic Behavior Towards Aminotriazole

A novel electrochemical aptasensor based on polyaniline and gold nanoparticles for ultrasensitive and selective detection of ascorbic acid

Ascorbic acid (AA) is involved in many physiological activities of the body and plays an important role in maintaining and promoting human health. It is also present in many natural and artificial foods. Therefore, the development of highly sensitive and accurate AA sensors is highly desirable for human health monitoring, as well as other commercial application fields. Herein, an ultrasensitive and selective electrochemical sensor based on an aptamer was developed for the determination of AA for the first time. The aptasensor was fabricated by modifying a composite made of polyaniline (PANI) and gold nanoparticles (AuNPs) on a glassy carbon electrode. The morphologies and electrochemical properties of the resulting electrodes were characterized by various analytical methods. The results indicated relatively good electrical conduction properties of PANI for accelerated electron transfer. The modification with AuNPs provided signal amplification, suitable for applications as novel platforms for the sensitive sensing of AA. Under optimized conditions, the proposed aptasensor displayed a wide linear response toward the detection of AA from 1.0 to 1.0 × 105 ng L-1 coupled with a low detection limit of 0.10 ng L-1. The sensor also exhibited excellent selectivity and high stability, with at least 2000-fold higher sensitivity than similar previously reported methods. Importantly, the aptasensor exhibited promising properties for the determination of AA in real fruits, vegetables, and infant milk powder, thereby showing potential for food analysis.

Hierarchical tungsten-doped bimetallic selenides nanosheets arrays/nickel foam composite electrode as efficient gallic acid electrochemical sensor

The development of effective and accurate gallic acid (GA) electrochemical sensors is critical for food and pharmaceutical industry and health perspectives. Multi-step hydrothermal treatments of bimetallic (Ni/Co) flaky bimetallic hydroxides (NiCo FBHs) were employed to prepare tungsten-doped cobalt-nickel selenides nanosheets arrays (W-Co_0.5Ni_0.5Se₂ NSAs) serving  as the main active substance of GA detection. The morphology and composition of the W-Co_0.5Ni_0.5Se₂ NSAs/NF were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The GA electrochemical sensor constructed by the W-Co_0.5Ni_0.5Se₂ NSAs/NF composite electrode exhibits two linear concentration ranges of 1.00-36.2 μM and 36.2-1.00×10³ μM for GA electrochemical detection with a limit of detection of  0.120 μM (S/N=3) at the working potential of 0.05 V (vs. SCE). The W-Co_0.5Ni_0.5Se₂ NSAs/NF shows high selectivity, good long-term stability, high recovery in the range 97.9-105%, and a relative standard deviation (RSD) between 0.60 and 2.7%.

Extremely Sensitive Molecularly Imprinted ECL Sensor with Multiple Probes Released from Liposomes Immobilized by a Light-Triggered Click Reaction

A molecularly imprinted electrochemiluminescence sensor was prepared for sensitive and selective determination of aminotriazole via a novel strategy of multiple Ru(bpy)₃Cl₂ probes released from liposomes immobilized by a light-triggered click reaction. This sensing strategy provides a platform for trace detection of amino-containing pesticides. The target on the molecularly imprinted membrane connected to the Ru(bpy)₃Cl₂-encapsulated liposomes via the click reaction. After the destabilizing agent Triton X-100 was added, numerous Ru(bpy)₃Cl₂ molecules were released by liposomes on the molecularly imprinted polymer electrode. The ECL response of the sensor was linearly proportional to the logarithm of the aminotriazole concentration ranging from 5.00 × 10^-18 to 1.00 × 10^-12 mol/L, and the detection limit was 1.15 × 10^-18 mol/L. The sensitivity of the detection was significantly improved, and the analysis process was simplified.

Interference-free electrocatalysis of p-chloro meta xylenol (PCMX) on uniquely designed optimized polymeric nanohybrid of P(EDOT-co-OPD) and fMWCNT modified glassy carbon electrode

p-Chloro-meta-Xylenol (PCMX) is an environmentally hazardous phenolic compound having biocidal and antiseptic activity. Very few research publications addressed monitoring this contaminant. This paper presents a rapid sensing system to quantify it in waste water samples. The electrochemical activity of PCMX was exploited through a unique polymeric nanocomposite modified transducer for its quantification. Poly[(3,4-Ethylenedioxythiophene)-co-(o-phenylenediamine)] [P(EDOT-co-OPD)] was deposited through one-step electropolymerization technique on the glassy carbon electrode (GCE) modified by functionalized multi-wall carbon nanotubes (fMWCNTs). An optimized combination of these constituents was evaluated using response surface methodology (RSM) based Box-Behnken experimental design. This maximized the response for PCMX using differential pulse voltammetry (DPV). The sensing matrix was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The structural and morphological study of the modified film was conducted by Fourier transform-infrared spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), and field emission scanning electron microscope (FESEM). The anodic peak current could be read from a wide range of 0.5-225 μM calibration curve with a detection limit of 0.2545 μmol L^-1. Interestingly this work did not use any biomaterial in the modification but achieved interference-free response with excellent selectivity, sensitivity (0.4668 μA μM^-1 cm^-2), reproducibility (RSD = 2.2%), and repeatability. The sensing platform showed good stability (85.7%) of 3 months even after 150 times repetitive use. Its applicability for real samples was established by good correlation with standard methods.

Design and Biosensing of a Ratiometric Electrochemiluminescence Resonance Energy Transfer Aptasensor between a g-C3N4 Nanosheet and Ru@MOF for Amyloid-β Protein

A dual-wavelength ratiometric electrochemiluminescence resonance energy transfer (ECL-RET) aptasensor based on the carbon nitride nanosheet (g-C₃N₄ NS) and metal-organic frameworks (Ru@MOFs) as energy donor-receptor pairs is first designed for the detection of the amyloid-β (Aβ) protein. The cathode ECL of g-C₃N₄ NS gradually decreased, whereas the anode ECL from Ru@MOF pyramidally enhanced along with the increasing concentration of Aβ in a 0.1 M phosphate-buffered saline solution containing 0.1 M S₂O₈^2-. Additionally, it is worth noting that 2-amino terephthalic acid from MOF not only can load abundant amounts of luminophor Ru(bpy)₃²⁺ but also promote the conversion of more amounts of S₂O₈^2- that served as a coreactant accelerator into SO₄^•-, further enhancing the ECL signal of Ru@MOF. Besides, the ECL intensity from the g-C₃N₄ NS had a tremendous spectrum overlap with the UV-vis spectrum of Ru@MOF, demonstrating the high-efficiency ECL-RET from g-C₃N₄ NS to Ru@MOF. According to the ratio of ECL_460nm/ECL_620nm, the constructed aptasensor for the detection of Aβ showed a wide linear range from 10^-5 to 500 ng/mL and a low detection limit of 3.9 fg/mL (S/N = 3) with a correction coefficient of 0.9965. The obtained results certified that the dual-wavelength ratiometric ECL sensor could provide a reliable direction and have the potential for application in biosensing and clinical diagnosis fields.

Scanning Techniques for Nanobioconjugates of Carbon Nanotubes

Nanobioconjugates using carbon nanotubes (CNTs) are attractive and promising hybrid materials. Various biological applications using the CNT nanobioconjugates, for example, drug delivery systems and nanobiosensors, have been proposed by many authors. Scanning techniques such as scanning electron microscopy (SEM) and scanning probe microscopy (SPM) have advantages to characterize the CNT nanobioconjugates under various conditions, for example, isolated conjugates, conjugates in thin films, and conjugates in living cells. In this review article, almost 300 papers are categorized based on types of CNT applications, and various scanning data are introduced to illuminate merits of scanning techniques.

Synthesis of a functionalized multi-walled carbon nanotube decorated ruskin michelle-like ZnO nanocomposite and its application in the development of a highly sensitive hydroquinone sensor

Electrochemical determination of hydroquinone based on a f-MWCNT decorated ruskin michelle-like ZnO nanocomposite.

Determination of subnanomolar levels of mercury (II) by using a graphite paste electrode modified with MWCNTs and Hg(II)-imprinted polymer nanoparticles

Mercury ion-imprinted polymer nanoparticles (Hg-IP-NPs) were synthesized via precipitation polymerization by using itaconic acid as a functional monomer. A carbon paste electrode was impregnated with the synthesized Hg-IP-NPs and MWCNTs to obtain a highly sensitive and selective electrode for determination of Hg(II). Mercury ion is first accumulated on the electrode surface via an open circuit procedure. After reduction of Hg(II) ions to its metallic form at a negative pre-potential, square wave anodic stripping voltammetry was applied to generate the electrochemical signal. The high affinity of the Hg-IP-NPs for Hg(II) was substantiated by comparing of the signals of electrodes with imprinted and non-imprinted polymer. The beneficial effect of MWCNTs on the voltammetric signal is also demonstrated. Under the optimized conditions and at a typical working potential of +0.05 V (vs. Ag/AgCl), the electrode has a linear response in the 0.1-20 nmol L^-1 Hg(II) concentration range and a 29 pM detection limit. The electrochemical sensitivity is as high as 1441 A·M^-1·cm^-2 which is among the best values known. The electrode was applied to the determination of Hg(II) in water samples. Graphical abstract Schematic representation of the sensor electrode modified with mercury-imprinted polymer nanoparticles, and the recognition and voltammetric determination steps.