Addition of norbixin microcapsules obtained by spray drying in an isotonic tangerine soft drink as a natural dye

Development, characterization, and immunomodulation performance of spray-dried Moringa oleifera seed extract in Longfin yellowtail Seriola rivoliana

Moringa oleifera is one of the most promising plants in aquaculture because it improves the health status, zootechnical parameters and resistance against diseases. This research evaluates the physicochemical, antioxidant values of spray-dried Moringa oleifera seed extract microencapsulates obtained at 140 and 180 °C with whey protein concentrate (WPC) and maltodextrin (MD) as wall materials in two different proportions: WPC 100% and WPC-MD (3:1). Also, immune response of peripheral blood leukocytes (PBL) of Longfin yellowtail Seriola rivoliana stimulated with spray-dried Moringa oleifera seed for 24 h was assessed. The physicochemical parameters show that the recovery yield for all the treatments was of 65% and microencapsulates demonstrated to be stable in the physicochemical tests with low solubilization times and protection against humidity. For WPC-MD (3:1)/140 °C, bioactive compound retention and antioxidant potential were higher than in other combinations. The immunological test show that any treatments was non-cytotoxic against peripheral blood leukocytes. WPC-MD (3:1)/140 °C treatment enhanced immune parameters as phagocytosis, respiratory burst, myeloperoxidase activities and nitric oxide production. Immune related genes as IL-1β and TNF-α were up-regulated in those stimulated leukocytes with WPC-MD (3:1)/140 °C. The results suggest that this combination may be a good alternative for animal health as a medicinal and immunostimulant additive.

Comprehensive Update on Carotenoid Colorants from Plants and Microalgae: Challenges and Advances from Research Laboratories to Industry

The substitution of synthetic food dyes with natural colorants continues to be assiduously pursued. The current list of natural carotenoid colorants consists of plant-derived annatto (bixin and norbixin), paprika (capsanthin and capsorubin), saffron (crocin), tomato and gac fruit lycopene, marigold lutein, and red palm oil (α- and β-carotene), along with microalgal Dunaliella β-carotene and Haematococcus astaxanthin and fungal Blakeslea trispora β-carotene and lycopene. Potential microalgal sources are being sought, especially in relation to lutein, for which commercial plant sources are lacking. Research efforts, manifested in numerous reviews and research papers published in the last decade, have been directed to green extraction, microencapsulation/nanoencapsulation, and valorization of processing by-products. Extraction is shifting from conventional extraction with organic solvents to supercritical CO2 extraction and different types of assisted extraction. Initially intended for the stabilization of the highly degradable carotenoids, additional benefits of encapsulation have been demonstrated, especially the improvement of carotenoid solubility and bioavailability. Instead of searching for new higher plant sources, enormous effort has been directed to the utilization of by-products of the fruit and vegetable processing industry, with the application of biorefinery and circular economy concepts. Amidst enormous research activities, however, the gap between research and industrial implementation remains wide.

Color and Stability of Anthocyanins of Chagalapoli (Ardisia compressa K.) Fruit Added to an Isotonic Beverage as Microcapsules and as Free Extract

The demand for natural pigments in the food industry is increasing. Color and stability of anthocyanins of chagalapoli (Ardisia compressa K.) fruit added to an isotonic beverage as microcapsules and free extract were evaluated at two temperatures (4 and 25 °C) in the absence of light. Anthocyanins degradation followed first-order kinetics in the evaluated conditions. The stability of anthocyanins, measured by the variables reaction rate (K), half-life time (t_1/2), and anthocyanin retention (AR), was affected significantly (p < 0.01) by temperature. At the end of storage at 4 °C, AR was 91.2 ± 0.28% and 89.63 ± 0.22% in the beverages with microcapsules (BM) and with anthocyanins from extract (BE), respectively, without a significant difference (p ≥ 0.05) between them. However, at 25 °C, AR in the BM was 53.72 ± 0.27%, a significantly lower value (p ≤ 0.05) than that in BE (58.83 ± 1.37%). The color difference values (ΔE) in beverages stored at 4 °C were 3.81 and 2.17 for BM and BE, respectively, while at 25 °C, it was 8.57 and 8.21, respectively. The most stable anthocyanin was cyanidin 3-galactoside. Chagalapoli anthocyanins, both as microcapsules or as an extract, are adequate for adding natural color to isotonic beverages.

Biodegradable sodium alginate films incorporated with lycopene and β-carotene for food packaging purposes

Incorporating carotenoids into sodium alginate films can give them functional properties for food packaging applications. The lycopene and β-carotene were included in the biopolymer matrix at 0.1%, 0.3%, and 0.5% (g carotenoid/g polymer). There was no significant difference (p > 0.05) in film thickness (45 ± 1 μm) of sodium alginate films with carotenoids. Nevertheless, the low quantity of carotenoids was enough to promote significant variations in the tensile properties of films. The films with lycopene or β-carotene showed lower tensile strength and elongation at break than control films. The carotenoid incorporation promoted a reduction (p < 0.05) in water vapor permeability, mainly by adding 0.5%. In the same way, it improved the light transmission and thermal stability of films and did not affect the water solubility of films. The scanning electron microscopy of films showed a homogeneous surface, but the films with lycopene or β-carotene showed a more compact structure than the control film. The sodium alginate films incorporated with 0.3% lycopene or β-carotene showed a remarkable protective effect on sunflower oil against oxidation compared with traditional commercial plastic packaging under accelerated storage conditions (heat and light). Therefore, they can be considered a potential material for food packaging purposes.

Characterization of Cassava Starch Extruded Sheets Incorporated with Tucumã Oil Microparticles

The application of biopolymers and feasible technologies to obtain sheets is crucial for the large-scale production of food packages and for reducing plastic pollution. Additionally, the inclusion of additives in sheets can affect and improve their properties. This work aimed to incorporate tucumã oil (TO) and TO microparticles produced by spray drying (SD), spray chilling (SC), and their combination (SDC) into extruded cassava starch sheets and to evaluate the effect of such addition on their physical, optical, and mechanical properties. Gum Arabic and vegetable fat were used as wall materials for SD and SC/SDC, respectively. The sheets enriched with tucumã oil (FO) and the microparticles produced by SD, SC and SDC (FSD, FSC, and FSDC, respectively) presented yellow color (hue angle around 90°) and higher opacity (11.6–25.3%) when compared to the control (6.3%). All sheets showed high thickness (1.3–1.8 mm), and the additives reduced the water solubility of the materials (from 27.11% in the control to 24.67–25.54% in enriched samples). The presence of large SDC particles, as evidenced by Scanning Electron Microscopy (SEM), caused discontinuity of the sheet structure and decreased mechanical strength of the FSDC. One may conclude that potential active packages were obtained by extrusion of cassava starch sheets added with pure and encapsulated TO.

Inactivation of Alicyclobacillus acidoterrestris spores, single or composite Escherichia coli and native microbiota in isotonic fruit-flavoured sports drinks processed by UV-C light

Pasteurized sports drinks and other fruit-based beverages are susceptible to deterioration due to thermal processing ineffectiveness to inactivate certain spoilage microorganisms, like Alicyclobacillus acidoterrestris. This represents a major challenge for the beverage industry. The goals of this study were to: i) investigate the UV-C inactivation (annular thin film unit, actinometrical delivered fluence: 795-1270 mJ/cm², 10-15 min, 20 °C, 1.8 L/h, Re_h = 391-1067, recirculation mode operation) and the evolution during refrigerated storage of A. acidoterrestris ATCC 49025 spores and single or composite Escherichia coli ATCC 25922 in isotonic sports drinks (ISDs) made from orange (orange-ISD, UVT% = 81) or orange-banana-mango-kiwi-strawberry-lemon juices (multi-fruit-ISD, UVT% = 91), compared to a turbid orange-tangerine juice (OT juice, UVT% = 40); ii) assess the effect of pH, °Brix, A_254nm, turbidity, colour and particle size of the ISDs and juice on microbial inactivation, iii) evaluate the evolution of native microbiota during cold storage, iv) investigate the Coroller, biphasic, Weibull, and Weibull-plus-tail models' ability to describe microbial inactivation and v) measure 5-hydroxymethylfurfural (HMF) formation. The modified biodosimetry method was used to calculate the germicidal UV-C fluences. Heat pasteurization (T-coil, 80 °C/6 min) was evaluated as the control treatment. UV-C was highly effective at inactivating E. coli as 4.1-5.1 and 4.5-5.6 log reductions were determined in the multi-fruit-ISD and orange-ISD, respectively, barely impacted by the background microbiota. No significant differences were recorded for the inactivation of E. coli in the UV-C and T-coil systems. Whereas, a significantly higher inactivation of A. acidoterrestris spores was achieved by UV-C (3.7-4.0 log reductions), compared to the negligible one achieved by the thermal treatment. Even though E. coli inactivation curves were similar in shape, UV-C was less effective when a cocktail of other E. coli strains was present. In comparison to the OT juice, the ISDs' inactivation kinetics were markedly different in shape, with a rapid decrease in population during the first minutes of treatment. The germicidal fluence (H_{d biod}) corresponding to A. acidoterrestris (19.1 mJ/cm²) was selected as it was higher than the one obtained for E. coli (11.0 mJ/cm²). UV-C induced 2.8- or 1.3 and 2.3- or 0.8 log-reductions of total aerobes or moulds and yeasts in the multi-fruit-ISD and orange-ISD, respectively. Compared to the other models, the Coroller and biphasic models showed a better fit and more accurate parameter estimates. UV-C-induced HMF production was not significant in the ISDs. The current study found that the UV-C treatment was more effective than typical heat pasteurization for inactivating A. acidoterrestris spores in isotonic drinks, following a similar trend for E. coli and native microbiota.

Improving norbixin dispersibility and stability by liposomal encapsulation using the pH-driven method

BACKGROUND

Norbixin, a carotenoid extracted from annatto seeds, is widely utilized as a natural pigment in foods, cosmetics and medicines. Its water solubility is relatively high under neutral or alkaline conditions but low under acidic conditions, which limits its application in some food products.

RESULTS

This problem was overcome by utilizing liposomes to encapsulate the carotenoids so that they could be easily dispersed within acidic solutions. The norbixin was loaded into the liposomes using the pH-driven method. Liposomes were produced by passing aqueous phospholipid dispersions through a microfluidizer under high pressure. Norbixin was then added to the liposome dispersions at pH 7.0 and then driven into the hydrophobic domains of the phospholipid bilayers by acidifying the system. Measurements of the encapsulation efficiency showed that the norbixin was successfully loaded into the liposomes using the pH-driven method. X-ray diffraction analysis showed that the norbixin was in an amorphous state after incorporation into the liposomes. Encapsulation of norbixin within the liposomes was also shown to increase its water dispersibility and chemical stability under acidic pH conditions.

CONCLUSION

The pH-driven method therefore provides a useful means of increasing the application of this bioactive carotenoid within functional foods and other products. © 2021 Society of Chemical Industry.

Investigation of brewer’s spent yeast as a bio-vehicle for encapsulation of natural colorants from pumpkin (Cucurbita moschata) peels

Brewer’s spent yeast (BSY) Saccharomyces cerevisiae has been currently explored as a bio-vehicle for encapsulation of bioactive compounds and as a delivery system. The main objectives of this work were...

Microencapsulation of carotenoid-rich materials: A review

Carotenoids are natural pigments that present several bioactive properties, including antioxidant, anticarcinogenic and provitamin A activities. However, these compounds are susceptible to degradation when exposed to a number of conditions (e.g. light, heat, oxygen), leading to loss of benefits and hampering their application in food products. Their hydrophobicity also makes incorporation into water-based foods more difficult. Microencapsulation techniques have been applied for decades to provide stability to carotenoid-rich extracts under typical conditions of processing and storage of foods, besides offering several other advantages to the use and application of these materials. This work reviews the recent advances in the microencapsulation of carotenoid-rich extracts, oils and oleoresins from varying sources, evidencing the technologies applied to encapsulate these materials, the effects of encapsulation on the obtained particles, and the impact of such processes on the bioaccessibility and release profile of carotenoids from microparticles. Moreover, recent applications of carotenoid-rich microparticles in food products are discussed. Most of the applied processes were effective in improving different aspects of the encapsulated materials, especially the stability of carotenoids during storage, resulting in microparticles with promising properties for future applications in food products. However, the lack of information about the effects of microencapsulation on carotenoids during processing of model foods, the sensory acceptance of enriched food products and the bioaccessibility and bioavailability of microencapsulated carotenoids reveals gaps that should be explored in the future.