Design and characterization of novel Al-doped ZnO nanoassembly as an effective nanoantibiotic

Clinically Deployable Bioelectronic Sensing Platform for Ultrasensitive Detection of Transferrin in Serum Sample

Varying levels of transferrin (Tf) have been associated with different disease conditions and are known to play a crucial role in various malignancies. Regular monitoring of the variations in Tf levels can be useful for managing related diseases, especially for the prognosis of certain cancers. We fabricated an immunosensor based on graphene oxide (GO) nanosheets to indirectly detect Tf levels in cancer patients. The GO nanosheets were deposited onto an indium tin oxide (ITO)-coated glass substrate and annealed at 120 °C to obtain reduced GO (rGO) films, followed by the immobilization of an antibody, anti-Tf. The materials and sensor probe used were systematically characterized by UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), atomic force microscopy (AFM), and Fourier transform infrared spectroscopy (FTIR). Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) were also used for the stepwise sensor probe characterizations and Tf detection in serum samples, respectively. The anti-Tf/rGO/ITO immunosensor DPV output demonstrated an excellent Tf detection capability in the linear range of 0.1 mg mL^-1 to 12 mg mL^-1 compared to the enzyme-linked immunosorbent assay (ELISA) detection range, with a limit of detection (LOD) of 0.010 ± 0.007 mg mL^-1. Furthermore, the results of the fabricated immunosensor were compared with those of the ELISA and autobioanalyzer techniques, showing an outstanding match with < 5% error and demonstrating the immunosensor's clinical potential.

Electrochemical Nano-Imprinting of Trimetallic Dendritic Surface for Ultrasensitive Detection of Cephalexin in Pharmaceutical Formulations

Cephalexin (CFX), a first-generation cephalosporin, is used to treat various infectious diseases. Although antibiotics have achieved considerable progress in the eradication of infectious diseases, their incorrect and excessive usage has contributed to various side effects, such as mouth soreness, pregnancy-related pruritus, and gastrointestinal symptoms, including nausea, epigastric discomfort, vomiting, diarrhoea, and haematuria. In addition to this, it also causes antibiotic resistance, one of the most pressing problems in the medical field. The World Health Organization (WHO) claims that cephalosporins are currently the most commonly used drugs for which bacteria have developed resistance. Hence, it is crucial to detect CFX in complex biological matrices in a highly selective and sensitive way. In view of this, a unique trimetallic dendritic nanostructure comprised of cobalt, copper, and gold was electrochemically imprinted on an electrode surface by optimising the electrodeposition variables. The dendritic sensing probe was thoroughly characterised using X-ray photoelectron spectroscopy, scanning electron microscopy, chronoamperometry, electrochemical impedance spectroscopy, and linear sweep voltammetry. The probe displayed superior analytical performance, with a linear dynamic range between 0.05 nM and 105 nM, limit of detection of 0.04 ± 0.01 nM, and response time of 4.5 ± 0.2 s. The dendritic sensing probe displayed minimal response to interfering compounds, such as glucose, acetaminophen, uric acid, aspirin, ascorbic acid, chloramphenicol, and glutamine, which usually occur together in real matrices. In order to check the feasibility of the surface, analysis of a real sample was carried out using the spike and recovery approach in pharmaceutical formulations and milk samples, yielding current recoveries of 93.29–99.77% and 92.66–98.29%, respectively, with RSD < 3.5%. It only took around 30 min to imprint the surface and analyse the CFX molecule, making it a quick and efficient platform for drug analysis in clinical settings.

Release kinetics modelling and in vivo-vitro, shelf-life study of resveratrol added composite transdermal scaffolds

In this article, the suitability of composite transdermal biomaterial for wound dressing applications is discussed. Bioactive, antioxidant Fucoidan and Chitosan biomaterials were doped into polyvinyl alcohol/β-tricalcium phosphate based polymeric hydrogels loaded with Resveratrol, which has theranostic properties, and biomembrane design with suitable cell regeneration properties was aimed. In accordance with this purpose, tissue profile analysis (TPA) was performed for the bioadhesion properties of composite polymeric biomembranes. Fourier Transform Infrared Spectrometry (FT-IR), Thermogravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM-EDS) analyses were performed for morphological and structural analyses of biomembrane structures. In vitro Franz diffusion mathematical modelling of composite membrane structures, biocompatibility (MTT test) and in vivo rat tests were performed. TPA analysis of resveratrol loaded biomembrane scaffold design; compressibility; 13.4 ± 1.9(g.s), hardness; 16.8 ± 1(g), adhesiveness; -11 ± 2.0(g.s), elasticity; 0.61 ± 0.07, cohesiveness; 0.84 ± 0.04 were found. Proliferation of the membrane scaffold was 189.83 % at 24 h and 209.12 % at 72 h. In the in vivo rat test; at the end of 28th day, it was found that biomembrane_3 provided 98.75 ± 0.12 % wound shrinkage. The shelf-life of RES in the transdermal membrane scaffold, which was determined as Zero order according to Fick's law in in vitro Franz diffusion mathematical modelling, was found to be approximately 35 days by Minitab statistical analysis. The importance of this study is that the innovative and novel transdermal biomaterial supports tissue cell regeneration and cell proliferation in theranostic applications as a wound dressing.

Nanobiosensors Design Using 2D Materials: Implementation in Infectious and Fatal Disease Diagnosis

Nanobiosensors are devices that utilize a very small probe and any form of electrical, optical, or magnetic technology to detect and analyze a biochemical or biological process. With an increasing population today, nanobiosensors have become the broadly used electroanalytical tools for the timely detection of many infectious (dengue, hepatitis, tuberculosis, leukemia, etc.) and other fatal diseases, such as prostate cancer, breast cancer, etc., at their early stage. Compared to classical or traditional analytical methods, nanobiosensors have significant benefits, including low detection limit, high selectivity and sensitivity, shorter analysis duration, easier portability, biocompatibility, and ease of miniaturization for on-site monitoring. Very similar to biosensors, nanobiosensors can also be classified in numerous ways, either depending on biological molecules, such as enzymes, antibodies, and aptamer, or by working principles, such as optical and electrochemical. Various nanobiosensors, such as cyclic voltametric, amperometric, impedimetric, etc., have been discussed for the timely monitoring of the infectious and fatal diseases at their early stage. Nanobiosensors performance and efficiency can be enhanced by using a variety of engineered nanostructures, which include nanotubes, nanoparticles, nanopores, self-adhesive monolayers, nanowires, and nanocomposites. Here, this mini review recaps the application of two-dimensional (2D) materials, especially graphitic carbon nitride (g-C₃N₄), graphene oxide, black phosphorous, and MXenes, for the construction of the nanobiosensors and their application for the diagnosis of various infectious diseases at very early stage.

Unfolding of the SARS-CoV-2 spike protein through infrared and ultraviolet-C radiation based disinfection

The spreading of coronavirus from contacting surfaces and aerosols created a pandemic around the world. To prevent the transmission of SARS-CoV-2 virus and other contagious microbes, disinfection of contacting surfaces is necessary. In this study, a disinfection box equipped with infrared (IR) radiation heating and ultraviolet-C (UV-C) radiation is designed and tested for its disinfection ability against pathogenic bacteria and SARS-CoV-2 spike protein. The killing of a Gram-positive, namely, S. aureus and a Gram-negative namely, S. typhi bacteria was studied followed by the inactivation of the spike protein. The experimental parameters were optimized using a statistical tool. For the broad-spectrum antibacterial activity, the optimum condition was holding at 65.61 °C for 13.54 min. The killing of the bacterial pathogen occurred via rupturing the cell walls as depicted by electron microscopy. Further, the unfolding of SARS-CoV-2 spike protein and RNase A was studied under IR and UV-C irradiations at the aforesaid optimized condition. The unfolding of both the proteins was confirmed by changes in the secondary structure, particularly an increase in β-sheets and a decrease in α-helixes. Remarkably, the higher penetration depth of IR waves up to subcutaneous tissue resulted in lower optimum disinfection temperature, <70 °C in vogue. Thus, the combined UV-C and IR radiation is effective in killing the pathogenic bacteria and denaturing the glycoproteins.

Enhanced melanoidin removal by amine-modified Phyllanthus emblica leaf powder

Melanoidins are classified as hazardous colouring and polluting biopolymers, which are generated in very large amounts in molasses-based distillery effluent. In this study, melanoidin was removed through adsorption using amine surface-modified Phyllanthus emblica leaf powder (PELP) as a low-cost natural adsorbent. The amine-modified adsorbents were prepared by forming self-assembled monolayers (SAMs). The pzc of melanoidin and anime-modified PELP were found to be 6.9 and 3.8, respectively. RSM-CCD was used to optimize the environmental conditions considering adsorbent doses (0.2-2 % w/v), pH (3-11) and temperature (25-55 °C). A complete decolourization of melanoidin (98.50 ± 1 %) was observed at the optimized conditions (44.0 °C, pH = 5.93 and dose = 1.34 % w/v) along with 93.4 ± 0.2 % of COD reduction. The surface modification enhanced the maximum adsorption capacity to 616.2 mg g^-1 i.e. 2.5 folds. The modified adsorbent also resulted in colour removal and COD reduction as 91 ± 3 and 84 ± 2 %, respectively from a real spentwash sample.

Ag Functionalization of Al-Doped ZnO Nanostructured Coatings on PLA Substrate for Antibacterial Applications

Developing smart, environmentally friendly, and effective antibacterial surfaces is fundamental to contrast the diffusion of human infections and diseases for applications in the biomedical and food packaging sectors. To this purpose, here we combine aluminum-doped zinc oxide (AZO) and Ag to grow nanostructured composite coatings on bioplastic polylactide (PLA) substrates. The AZO layers are grown by RF magnetron sputtering, and then functionalized with Ag in atomic form by RF magnetron sputtering and in form of nanoparticles by supersonic cluster beam deposition. We compare the morphology, wettability, and antimicrobial performance of the nanostructured coatings obtained by the two methods. The different growth modes in the two techniques used for Ag functionalization are found to produce some differences in the surface morphology, which, however, do not induce significant differences in the wettability and antimicrobial response of the coatings. The antibacterial activity is investigated against Escherichia coli and Staphylococcus aureus as representatives of Gram-negative and Gram-positive bacteria, respectively. A preferential antimicrobial action of Ag on the first species and of AZO on the second one is evidenced. Through their combination, we obtain a hybrid composite coating taking advantage of the synergistic dual action of the two materials deposited, with a total bacterial suppression within few minutes for the first species and few hours for the second one, thus representing a valuable solution as a wide-spectrum bactericidal device.

Can an InChI for Nano Address the Need for a Simplified Representation of Complex Nanomaterials across Experimental and Nanoinformatics Studies?

Chemoinformatics has developed efficient ways of representing chemical structures for small molecules as simple text strings, simplified molecular-input line-entry system (SMILES) and the IUPAC International Chemical Identifier (InChI), which are machine-readable. In particular, InChIs have been extended to encode formalized representations of mixtures and reactions, and work is ongoing to represent polymers and other macromolecules in this way. The next frontier is encoding the multi-component structures of nanomaterials (NMs) in a machine-readable format to enable linking of datasets for nanoinformatics and regulatory applications. A workshop organized by the H2020 research infrastructure NanoCommons and the nanoinformatics project NanoSolveIT analyzed issues involved in developing an InChI for NMs (NInChI). The layers needed to capture NM structures include but are not limited to: core composition (possibly multi-layered); surface topography; surface coatings or functionalization; doping with other chemicals; and representation of impurities. NM distributions (size, shape, composition, surface properties, etc.), types of chemical linkages connecting surface functionalization and coating molecules to the core, and various crystallographic forms exhibited by NMs also need to be considered. Six case studies were conducted to elucidate requirements for unambiguous description of NMs. The suggested NInChI layers are intended to stimulate further analysis that will lead to the first version of a "nano" extension to the InChI standard.

Application of bimetallic Al-doped ZnO nano-assembly for heavy metal removal and decontamination of wastewater

In the present study, bimetallic aluminium doped zinc oxide (AZO) nano-assemblies were synthesized for heavy metal removal and disinfection of wastewater. These bimetallic nanoparticles (NPs) were prepared by a simple co-precipitation method and characterized using field emission transmission electron microscopy (FETEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), a Litesizer, and energy dispersive X-ray spectroscopy (EDS). The AZO NPs was tested for lead removal at various environmental conditions and optimized at pH 4 and 25 °C. The kinetic data were well fitted to the pseudo-second-order model and the process consisted of both surface adsorption and intraparticle diffusion. Al doping enhanced the surface charge of AZO NPs four fold as compared to ZnO, which improved colloidal stability and contributed towards its reusability. AZO NPs exhibited excellent removal efficiency of 86% over three adsorption-desorption cycles. The adsorption was found to be an exothermic and physicochemical process. The prepared AZO NPs were also used to treat a real wastewater sample and found to effectively remove Pb(II) and kill all the bacteria present.

Measurement of aflatoxin M1 in powder and pasteurized milk samples by using a label-free electrochemical aptasensor based on platinum nanoparticles loaded on Fe-based metal-organic frameworks

In the present study, a sensitive label-free electrochemical aptasensor is introduced to measure aflatoxin M1 (AFM1) by using platinum nanoparticles (PtNPs) decorated on a glassy carbon electrode (GCE) modified with Fe-based metal-organic frameworks, MIL-101(Fe). The MIL-101(Fe) and the PtNP/MIL-101(Fe) are synthesized and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, UV-Visible spectroscopy, and field-emission scanning electron microscopy. Cyclic voltammetry and electrochemical impedance spectroscopy (EIS) are done to monitor the fabrication processes of the aptasensor. In optimum conditions, the linear calibration range of 1.0 × 10^-2 to 80.0 ng mL^-1 and the detection limit of 2.0 × 10^-3 ng mL^-1 are obtained to measure AFM1 concentration using the EIS method. Finally, the fabricated aptasensor is successfully applied to measure AFM1 concentration in powder and pasteurized milk samples.

Fabrication and a detailed study of antibacterial properties of α-Fe2O3/NiO nanocomposites along with their structural, optical, thermal, magnetic and cytotoxic features

Nanomaterials have specific properties which are uncommon in their bulk counterparts. Because of these unique characteristics, nanotechnology has been explored for various applications by the scientific community and it can play a crucial role in providing solutions of current major healthcare problems. In the present work, we describe the fabrication of a novel inorganic alternative of traditional antibiotics, which can effectively counter the pathogenic bacteria including multi drug resistant bacterial strains. For this purpose, nanocomposites of Fe/Ni oxide with different molar concentrations of nickel have been prepared via wet-chemical approach along with the α-Fe₂O₃ and NiO nanoparticles. The bactericidal efficiency of the prepared samples were tested against pathogenic strains of B. subtilis, S. aureus, E. coli and S. typhi using two distinct methods. In addition to this, structural, physical and chemical properties of the nanomaterials were studied using XRD, TEM, EDAX, Raman, VSM and TGA-DTA. Also, the cytotoxicity of synthesized samples was assessed using MTT assay against human cell lines MCF-10A (normal) and MCF7 (cancer).