Effect of dynamic spreading and the disperse phase of crystalline starch nanoparticles in enhancing oil recovery at reservoir condition of a typical sarawak oil field

Chemical and Physical Architecture of Macromolecular Gels for Fracturing Fluid Applications in the Oil and Gas Industry; Current Status, Challenges, and Prospects

Hydraulic fracturing is vital in recovering hydrocarbons from oil and gas reservoirs. It involves injecting a fluid under high pressure into reservoir rock. A significant part of fracturing fluids is the addition of polymers that become gels or gel-like under reservoir conditions. Polymers are employed as viscosifiers and friction reducers to provide proppants in fracturing fluids as a transport medium. There are numerous systems for fracturing fluids based on macromolecules. The employment of natural and man-made linear polymers, and also, to a lesser extent, synthetic hyperbranched polymers, as additives in fracturing fluids in the past one to two decades has shown great promise in enhancing the stability of fracturing fluids under various challenging reservoir conditions. Modern innovations demonstrate the importance of developing chemical structures and properties to improve performance. Key challenges include maintaining viscosity under reservoir conditions and achieving suitable shear-thinning behavior. The physical architecture of macromolecules and novel crosslinking processes are essential in addressing these issues. The effect of macromolecule interactions on reservoir conditions is very critical in regard to efficient fluid qualities and successful fracturing operations. In future, there is the potential for ongoing studies to produce specialized macromolecular solutions for increased efficiency and sustainability in oil and gas applications.

Synthesis and Enhanced Oil Recovery Potential of the Bio-Nano-Oil Displacement System

Nanoparticles (NPs) have attracted great attention in the tertiary oil recovery process due to their unique properties. As an economical and efficient green synthesis method, biosynthesized nanoparticles have the advantages of low toxicity, fast preparation, and high yield. In this study, with the theme of biotechnology, for the first time, the bio-nanoparticles reduced by iron-reducing bacteria were compounded with the biosurfactant produced by Bacillus to form a stable bio-nano flooding system, revealing the oil flooding mechanism and enhanced oil recovery (EOR) potential of the bio-nano flooding system. The interfacial properties of the bio-nano-oil displacement system were studied by interfacial tension and wettability change experiments. The enhanced oil recovery potential of the bio-nano-oil displacement agent was measured by microscopic oil displacement experiments and core flooding experiments. The bio-nano-oil displacement system with different nanoparticle concentrations can form a stable dispersion system. The oil-water interfacial tension and contact angle decreased with the increase in concentration of the bio-nano flooding system, which also has a high salt tolerance. Microscopic oil displacement experiments proved the efficient oil displacement of the bio-nano-oil displacement system and revealed its main oil displacement mechanism. The effects of concentration and temperature on the recovery of the nano-biological flooding system were investigated by core displacement experiments. The results showed that the recovery rate increased from 4.53 to 15.26% with the increase of the concentration of the system. The optimum experimental temperature was 60 °C, and the maximum recovery rate was 15.63%.

Thermophysical Properties of Nanofluid in Two-Phase Fluid Flow through a Porous Rectangular Medium for Enhanced Oil Recovery

It is necessary to sustain energy from an external reservoir or employ advanced technologies to enhance oil recovery. A greater volume of oil may be recovered by employing nanofluid flooding. In this study, we investigated oil extraction in a two-phase incompressible fluid in a two-dimensional rectangular porous homogenous area filled with oil and having no capillary pressure. The governing equations that were derived from Darcy’s law and the mass conservation law were solved using the finite element method. Compared to earlier research, a more efficient numerical model is proposed here. The proposed model allows for the cost-effective study of heating-based inlet fluid in enhanced oil recovery (EOR) and uses the empirical correlations of the nanofluid thermophysical properties on the relative permeability equations of the nanofluid and oil, so it is more accurate than other models to determine the higher recovery factor of one nanoparticle compared to other nanoparticles. Next, the effect of nanoparticle volume fraction on flooding was evaluated. EOR via nanofluid flooding processes and the effect of the intake temperatures (300 and 350 K) were also simulated by comparing three nanoparticles: SiO2, Al2O3, and CuO. The results show that adding nanoparticles (<5 v%) to a base fluid enhanced the oil recovery by more than 20%. Increasing the inlet temperature enhanced the oil recovery due to changes in viscosity and density of oil. Increasing the relative permeability of nanofluid while simultaneously reducing the relative permeability of oil due to the presence of nanoparticles was the primary reason for EOR.

Extraction, characterization and evaluation of saponin-based natural surfactant for enhanced oil recovery

To minimize environmental impact and costs, natural surfactants are suggested as an ecologically sustainable replacement for synthetic surfactants. The aim of this work is to evaluate the efficiency of low-cost saponin-based natural surfactant (SBNS) from Vernonia amygdalina (VA) leaves for enhanced oil recovery (EOR). Furthermore, the study investigated the IFT behaviour of SBNS at oil-water interface and the emulsion behaviour and oil displacement efficiency of SBNS. The SBNS was obtained via ultrasonic extraction of dried VA leaves in a water bath, centrifuging the obtained liquid mixture and freeze drying to evaporate to dryness. Thereafter, Fourier-transform infrared spectroscopy (FTIR) and high-performance liquid chromatography were used to characterize the extracted SBNS. Moreover, tensiometer (Easy-Dyne KRUSS) was used to study the interfacial tension (IFT) behaviour of the SBNS at oil-water interface. Also, the SBNS ability to form stable emulsion in the presence of crude oil was determined. Finally, oil displacement by SBNS solution was investigated under simulated reservoir conditions (3000 psi and 100 °C) with high-pressure high-temperature (Fars EOR) core flooding equipment. The performance of SBNS was compared to commercial non-ionic surfactant 4-octylphenol polyethoxylated (TX-100). Experimental result indicated that the SBNS reduced the IFT at oil-water interface. The natural surfactant lowered the IFT of the oil-water interface from 18.0 to 0.97 mN/m. Moreover, emulsions formed with SBNS showed good stability characterized by a decrease in the median drop diameter with an increase in SBNS concentration. Finally, oil displacement test shows that oil recovery of TX-100 and SBNS increased by 9% and 15% original-oil-in-place (OOIP), respectively. Hence, SBNS is recommended as an appropriate substitute for conventional surfactant due to its inexpensive raw material, lower toxicity, and higher efficiency.