An overview of key pretreatment processes for biological conversion of lignocellulosic biomass to bioethanol

Modeling lignin extraction with ionic liquids using machine learning approach

Lignin, next to cellulose, is the second most common natural biopolymer on Earth, containing a third of the organic carbon in the biosphere. For many years, lignin was perceived as waste when obtaining cellulose and hemicellulose and used as a biofuel for the production of bioenergy. However, recently, lignin has been considered a renewable raw material for the production of chemicals and materials to replace petrochemical resources. In this context, an increasing demand for high-quality lignin is to be expected. It is, therefore, essential to optimize the technological processes of obtaining it from natural sources, such as biomass. In this work, an investigation of the use of machine learning-based quantitative structure-property relationship (QSPR) modeling for the preliminary processing of lignin recovery from herbaceous biomass using ionic liquids (ILs) is described. Training of the models using experimental data collected from original publications on the topic is assumed, and molecular descriptors of the ionic liquids are used to represent structural information. The study explores the impact of both ILs' chemical structure and process parameters on the efficiency of lignin recovery from different bio sources. The findings give an insight into the extraction process and could serve as a foundation for further design of efficient and selective processes for lignin recovery using ionic liquids, which can have significant implications for producing biofuels, chemicals, and materials.

Development of binderless fiberboard from poplar wood residue with Trametes hirsuta

The utilization of agricultural and forestry residues for the development and preparation of green binderless fiberboard (BF) is an effective way to realize high-value utilization of lignocellulose biomass resources. This study focuses on the fabrication of BF with excellent mechanical and waterproof properties, utilizing poplar wood residue (PWR) as raw material and Trametes hirsuta as a pretreatment method. During the fermentation process, lignin-degrading enzymes and biological factors, such as sugars, were produced by T. hirsuta, which activated lignin by depolymerizing lignin bonds and modifying structural functional groups, and forming new covalent bonds between poplar fibers, ultimately enhancing adhesion. Additionally, the activated lignin molecules and sugar molecules coalesce under high temperatures and pressures, forming a dense carbonization layer that bolsters the mechanical properties of the fiberboard and effectively shields it from rapid water infiltration. The bio-pretreated BF for 10 days shows a MOR and MOE of up to 36.1 Mpa and 3704.3 Mpa, respectively, which is 261% and 247.8% higher than that of the bio-untreated fiberboard, and the water swelling ratio (WSR) rate is only 5.6%. Chemical composition analysis revealed that repolymerization occurred among lignin, cellulose, and hemicellulose, especially the molecular weight of lignin changed significantly, with the Mw of lignin increasing from 312066 g/mol to 892362 g/mol, and then decreasing to 825021 g/mol. Mn increased from 277790 g/mol to 316987.5 g/mol and then decreased to 283299.5 g/mol at 21 days. Compared to other artificial fiberboards prepared through microbial pretreatment, the BF prepared by microorganisms in this study exhibited the highest mechanical properties among the poplar wood biobased panels.

Extraction of homogeneous lignin oligomers by ozonation of Miscanthus giganteus and vine shoots in a pilot scale reactor

Lignin, a complex phenolic polymer crucial for plant structure, is mostly used as fuel but it can be harnessed for environmentally friendly applications. This article explores ozonation as a green method for lignin extraction from lignocellulosic biomass, aiming to uncover the benefits of the extracted lignin. A pilot-scale ozonation reactor was employed to extract lignin from Miscanthus giganteus (a grass variety) and vine shoots (a woody biomass). The study examined the lignin extraction and modification of the fractions and identified the generation of phenolic and organic acids. About 48 % of lignin was successfully extracted from both biomass types. Phenolic monomers were produced, vine shoots yielding fewer monomers than Miscanthus giganteus. Ozonation generated homogeneous lignin oligomers, although their molecular weight decreased during ozonation, with vine shoot oligomers exhibiting greater resistance to ozone. Extracted fractions were stable at 200 °C, despite the low molecular weight, outlining the potential of these phenolic fractions.

A review of nanotechnology in enzyme cascade to address challenges in pre-treating biomass

Nanotechnology has become a revolutionary technique for improving the preliminary treatment of lignocellulosic biomass in the production of biofuels. Traditional methods of pre-treatment have encountered difficulties in effectively degrading the intricate lignocellulosic composition, thereby impeding the conversion of biomass into fermentable sugars. Nanotechnology has enabled the development of enzyme cascade processes that present a potential solution for addressing the limitations. The focus of this review article is to delve into the utilization of nanotechnology in the pretreatment of lignocellulosic biomass through enzyme cascade processes. The review commences with an analysis of the composition and structure of lignocellulosic biomass, followed by a discussion on the drawbacks associated with conventional pre-treatment techniques. The subsequent analysis explores the importance of efficient pre-treatment methods in the context of biofuel production. We thoroughly investigate the utilization of nanotechnology in the pre-treatment of enzyme cascades across three distinct sections. Nanomaterials for enzyme immobilization, enhanced enzyme stability and activity through nanotechnology, and nanocarriers for controlled enzyme delivery. Moreover, the techniques used to analyse nanomaterials and the interactions between enzymes and nanomaterials are introduced. This review emphasizes the significance of comprehending the mechanisms underlying the synergy between nanotechnology and enzymes establishing sustainable and environmentally friendly nanotechnology applications.

Sustainable biorefinery approach by utilizing xylose fraction of lignocellulosic biomass

Lignocellulosic biomass (LCB) has been a lucrative feedstock for developing biochemical products due to its rich organic content, low carbon footprint and abundant accessibility. The recalcitrant nature of this feedstock is a foremost bottleneck. It needs suitable pretreatment techniques to achieve a high yield of sugar fractions such as glucose and xylose with low inhibitory components. Cellulosic sugars are commonly used for the bio-manufacturing process, and the xylose sugar, which is predominant in the hemicellulosic fraction, is rejected as most cell factories lack the five‑carbon metabolic pathways. In the present review, more emphasis was placed on the efficient pretreatment techniques developed for disintegrating LCB and enhancing xylose sugars. Further, the transformation of the xylose to value-added products through chemo-catalytic routes was highlighted. In addition, the review also recapitulates the sustainable production of biochemicals by native xylose assimilating microbes and engineering the metabolic pathway to ameliorate biomanufacturing using xylose as the sole carbon source. Overall, this review will give an edge on the bioprocessing of microbial metabolism for the efficient utilization of xylose in the LCB.

Synergistic effects of ferulic acid esterase-producing lactic acid bacteria, cellulase and xylanase on the fermentation characteristics, fibre and nitrogen components and microbial community structure of Broussonetia papyrifera during ensiling

BACKGROUND

The high fibre content of whole plants of Broussonetia papyrifera limits its efficient utilization. Ferulic acid esterase (FAE), in combination with xylanase, can effectively cleave the lignin-carbohydrate complex, promoting the function of cellulase. However, little is known about the impact of these additives on silage. To effectively utilize natural woody plant resources, FAE-producing Lactiplantibacillus plantarum RO395, xylanase (XY) and cellulase (CE) were used to investigate the dynamic fermentation characteristics, fibre and nitrogen components and microbial community structure during B. papyrifera ensiling.

RESULTS

Broussonetia papyrifera was either not treated (CK) or treated with FAE-producing lactic acid bacteria (LP), CE, XY, LP + CE, LP + XY or LP + CE + XY for 3, 7, 15, 30 or 60 days, respectively. In comparison with those in the CK treatment, the L. plantarum and enzyme treatments (LP + CE, LP + XY and LP + XY + CE), especially the LP + XY + CE treatment, significantly increased the lactic acid concentration and decreased the pH and the contents of acid detergent insoluble protein and NH3 -N (P < 0.05). Enzyme addition improved the degradation efficiency of lignocellulose, and a synergistic effect was observed after enzyme treatment in combination with LP; in addition, the lowest acid detergent fibre, neutral detergent fibre, hemicellulose and cellulose contents were detected after the LP + CE + XY treatment (P < 0.05). Moreover, CE, XY and LP additions significantly improved the microbial community structure, increased the relative abundance of Lactiplantibacillus and Firmicutes, and effectively inhibited undesirable bacterial (Enterobacter) growth during ensiling.

CONCLUSION

FAE-producing L. plantarum and the two tested enzymes exhibited synergistic effects on improving the quality of silage, which indicates that this combination can serve as an efficient method for improved B. papyrifera silage utilization. © 2023 Society of Chemical Industry.

Green solvents extraction-based detoxification to enhance the enzymatic hydrolysis of steam-exploded lignocellulosic biomass and recover bioactive compounds

A novel strategy for pre-treated biomass detoxification combining emerging green solvents and low environmental impact extraction technologies was evaluated. Steam-exploded biomass was subjected to microwave-assisted or orbital shaking extraction using bio-based or eutectic solvents. The extracted biomass was enzymatically hydrolysed. The potential of this detoxification methodology was studied in terms of phenolic inhibitors extraction and sugar production improvement. The effect of adding a post-extraction water washing step before hydrolysis was also evaluated. Excellent results were achieved when steam-exploded biomass was subjected to the microwave-assisted extraction combined with the washing step. The highest sugar production was achieved when ethyl lactate was used as extraction agent (49.80 ± 3.10 g total sugar/L) over the control (30.43 ± 0.34 g total sugar/L). Results suggested that a detoxification step based on green solvents would be a promising option to extract phenolic inhibitors, which can be revalorized as antioxidants, and improve the sugar production from the extracted pre-treated biomass.

Açai Seeds (Euterpe oleracea Mart) Are Agroindustrial Waste with High Potential to Produce Low-Cost Substrates after Acid Hydrolysis

Açai seeds have been discarded improperly around the Amazonia region, but they can be seen as promising low-cost substrates for fermentation processes. The structural carbohydrates and physicochemical characterization of açai seeds from the Amazonia were assessed followed by the determination of the optimal hydrolysis conditions using H3PO4 (phosphoric acid) and H2SO4 (sulfuric acid) to obtain a liquor with high contents of simple carbohydrates and low levels of potential microbial inhibitors usually generated during acid hydrolysis of carbohydrates. A central composite rotational design was carried out varying the concentrations of diluted acid (0-5%, w/v), solids (0.1-25%, w/v), and hydrolysis time (9.5-110 min). Acid hydrolysis with H2SO4 was more effective in producing reducing sugars (15.9-103.1 g/L) than H3PO4 (2.9-33.9 g/L) during optimization. The optimal hydrolysis conditions with H2SO4 were 3.5% of acid (w/v), 25% of solids during 70 min at 121 °C, which provided a liquor with 55 g/L of reducing sugars and low levels of microbial inhibitors: acetic acid (1.8 g/L), hydroxymethyl furfural (338 mg/L), and furfural (10 mg/L). Thus, açai seeds were characterized as promising agroindustrial waste with high potential to be used as a low-cost substrate in biotechnological processes, comprising relevant environmental and bioeconomic aspects for the development of the Amazonia.

Organosolv pretreatment: an in-depth purview of mechanics of the system

The concept of biorefinery has been advancing globally and organosolv pretreatment strategy has seen an upsurge in research due to its efficiency in removing the recalcitrant lignin and dissolution of cellulose. The high-performance organosolv system uses green solvents and its reusability contributes concurrently to the biorefinery sector and sustainability. The major advantage of the current system involves the continuous removal of lignin to enhance cellulose accessibility, thereby easing the later biorefinery steps, which were immensely restricted due to the recalcitrant lignin. The current system process can be further explored and enhanced via the amalgamation of new technologies, which is still a work in progress. Thus, the current review summarizes organosolv pretreatment and the range of solvents used, along with a detailed mechanistic approach that results in efficient pretreatment of LCB. The latest developments for designing high-performance pretreatment systems, their pitfalls, and advanced assessments such as Life Cycle Assessment along with Techno-Economic Assessment have also been deliberated to allow an insight into its diverse potential applicability towards a sustainable future.

Banana biomass waste: A prospective nanocellulose source and its potential application in food industry - A review

Bananas are among the most produced and consumed fruit all over the world. However, a vast amount of banana biomass is generated because banana trees bear fruit only once in their lifetime. This massive amount of biomass waste is either disposed of in agricultural fields, combusted, or dumped at plantations, thus posing environmental concerns. Nanocellulose (NC) extraction from this source can be one approach to improve the value of banana biomass. Owing to its superb properties, such as high surface area and aspect ratio, good tensile strength, and high thermal stability, this has facilitated nanocellulose application in the food industry either as a functional ingredient, an additive or in food packaging. In this review, two different applications of banana biomass NC were identified: (i) food packaging and (ii) food stabilizers. Relevant publications were reviewed, focusing on the nanocellulose extraction from several banana biomass applications as food additives, as well as on the safety and regulatory aspects. Ultimately, further research is required to prompt a perspicuous conclusion about banana biomass NC safety, its potential hazards in food applications, as well as its validated standards for future commercialization.

Lignin-Degrading Bacteria in Paper Mill Sludge

The effluents generated in the paper industry, such as black liquor, have a high content of lignin and other toxic components; however, they represent a source of lignin-degrading bacteria with biotechnological potential. Therefore, the present study aimed to isolate and identify lignin-degrading bacteria species in paper mill sludge. A primary isolation was carried out from samples of sludge present in environments around a paper company located in the province of Ascope (Peru). Bacteria selection was made by the degradation of Lignin Kraft as the only carbon source in a solid medium. Finally, the laccase activity (Um-L^-1) of each selected bacteria was determined by oxidation of 2,2'-azinobis-(3-etilbencenotiazolina-6-sulfonate) (ABTS). Bacterial species with laccase activity were identified by molecular biology techniques. Seven species of bacteria with laccase activity and the ability to degrade lignin were identified. The bacteria Agrobacterium tumefasciens (2), Klebsiella grimontii (1), and Beijeinckia fluminensis (1) were reported for first time. K. grimowntii and B. fluminensis presented the highest laccase activity, with values of 0.319 ± 0.005 UmL^-1 and 0.329 ± 0.004 UmL^-1, respectively. In conclusion, paper mill sludge may represent a source of lignin-degrading bacteria with laccase activity, and they could have potential biotechnological applications.

Optimization of Soybean Protein Extraction with Ammonium Hydroxide (NH4OH) Using Response Surface Methodology

Plants have been recognized as renewable and sustainable sources of proteins. However, plant protein extraction is challenged by the plant's recalcitrant cell wall. The conventional extraction methods make use of non-reusable strong alkali chemicals in protein-denaturing extraction conditions. In this study, soy protein was extracted using NH₄OH, a weak, recoverable, and reusable alkali. The extraction conditions were optimized using response surface methodology (RSM). A central composite design (CCD) with four independent variables: temperature (25, 40, 55, 70, and 85 °C); NH₄OH concentration (0.5, 1, and 1.5%); extraction time (6, 12, 18, and 24 h) and solvent ratio (1:5, 1:10, 1:15 and 1:20 w/v) were used to study the response variables (protein yield and amine concentration). Amine concentration indicates the extent of protein hydrolysis. The RSM model equation for the independent and response variables was computed and used to create the contour plots. A predicted yield of 64.89% protein and 0.19 mM amine revealed a multiple R-squared value of 0.83 and 0.78, respectively. The optimum conditions to obtain the maximum protein yield (65.66%) with the least amine concentration (0.14 Mm) were obtained with 0.5% NH₄OH concentration, 12 h extraction time, and a 1:10 (w/v) solvent ratio at 52.5 °C. The findings suggest that NH₄OH is suitable to extract soybean protein with little or no impact on protein denaturation.

Nature-inspired pretreatment of lignocellulose - Perspective and development

As sustainability gains increasing importance in addition to cost-effectiveness as a criterion for evaluating engineering systems and practices, biological processes for lignocellulose pretreatment have attracted growing attention. Biological systems such as white and brown rot fungi and wood-consuming insects offer fascinating examples of processes and systems built by nature to effectively deconstruct plant cell walls under environmentally benign and energy-conservative environments. Research in the last decade has resulted in new knowledge that advanced the understanding of these systems, provided additional insights into these systems' functional mechanisms, and demonstrated various applications of these processes. The new knowledge and insights enable the adoption of a nature-inspired strategy aiming at developing technologies that are informed by the biological systems but superior to them by overcoming the inherent weakness of the natural systems. This review discusses the nature-inspired perspective and summarizes related advancements, including the evolution from biological systems to nature-inspired processes, the features of biological pretreatment mechanisms, the development of nature-inspired pretreatment processes, and future perspective. This work aims to highlight a different strategy in the research and development of novel lignocellulose pretreatment processes and offer some food for thought.

Enzymatic hydrolysis of low temperature alkali pretreated wheat straw using immobilized β-xylanase nanoparticles

A low temperature alkali (LTA) pretreatment method was used to treat wheat straw. In order to obtain good results, different factors like temperature, incubation time, NaOH concentration and solid to liquid ratio for the pretreatment process were optimized. Wheat straw is a potential biomass for the production of monomeric sugars. The objective of the current study was to observe the saccharification (%) of wheat straw with immobilized magnetic nanoparticles (MNPs). For this purpose, immobilized MNPs of purified β-xylanase enzyme was used for hydrolysis of pretreated wheat straw. Wheat straw was pretreated using the LTA method and analyzed by SEM analysis. After completion of the saccharification process, saccharification% was calculated by using a DNS method. Scanning electron micrographs revealed that the hemicellulose, cellulose and lignin were partially removed and changes in the cell wall structure of the wheat straw had caused it to become deformed, increasing the specific surface area, so more fibers of the wheat straw were exposed to the immobilized β-xylanase enzyme after alkali pretreatment. The maximum saccharification potential of wheat straw was about 20.61% obtained after pretreatment with optimized conditions of 6% NaOH, 1/10 S/L, 30 °C and 72 hours. Our results indicate the reusability of the β-xylanase enzyme immobilized magnetic nanoparticles and showed a 15% residual activity after the 11th cycle. HPLC analysis of the enzyme-hydrolyzed filtrate also revealed the presence of sugars like xylose, arabinose, xylobiose, xylotriose and xylotetrose. The time duration of the pretreatment has an important effect on thermal energy consumption for the low-temperature alkali method.

Characterization of thermo/halo stable cellulase produced from halophilic Virgibacillus salarius BM-02 using non-pretreated biomass

The production of extremozymes from halophilic bacteria has increased significantly due to their stability and efficiency in catalyzing a reaction, as well as their capacity to display optimum activity at various salt concentrations. In the current study, the halophilic bacterium Virgibacillus salarius strain BM-02 could utilize many non-pretreated substrates including cellulose, corn stover, sugarcane bagasse and wheat bran as a sole carbon source. However, wheat bran was the best substrate for achieving optimum saccharification yield (90.1%). The partially purified cellulase was active and stable at a wide range of pH (5-8) with residual activities > 58%. Moreover, it was stable at 5-12% of NaCl. Metal ions have a variable impact on the activity of partially purified cellulase however, Fe⁺³ exhibited the highest increase in the cellulase activity. The enzyme exhibited a thermal stability at 40, 50 and 60 °C with half-lives of 1049.50, 168.14 and 163.5 min, respectively. The value of V_max was 22.27 U/mL while Km was 2.1 mM. The activation energy of denaturation E_d 69.81 kJ/mol, the enthalpy values (ΔH_d) were positive, and the entropy values (ΔS) were negative. Therefore, V. Salarius is recommended as a novel promising halophilic extremozyme producer and agricultural waste remover in the bio-industrial applications.

Role of metagenomics in prospecting novel endoglucanases, accentuating functional metagenomics approach in second-generation biofuel production: a review

As the fossil fuel reserves are depleting rapidly, there is a need for alternate fuels to meet the day to day mounting energy demands. As fossil fuel started depleting, a quest for alternate forms of fuel was initiated and biofuel is one of its promising outcomes. First-generation biofuels are made from edible sources like vegetable oils, starch, and sugars. Second-generation biofuels (SGB) are derived from lignocellulosic crops and the third-generation involves algae for biofuel production. Technical challenges in the production of SGB are hampering its commercialization. Advanced molecular technologies like metagenomics can help in the discovery of novel lignocellulosic biomass-degrading enzymes for commercialization and industrial production of SGB. This review discusses the metagenomic outcomes to enlighten the importance of unexplored habitats for novel cellulolytic gene mining. It also emphasizes the potential of different metagenomic approaches to explore the uncultivable cellulose-degrading microbiome as well as cellulolytic enzymes associated with them. This review also includes effective pre-treatment technology and consolidated bioprocessing for efficient biofuel production.

Multi-omics network model reveals key genes associated with p-coumaric acid stress response in an industrial yeast strain

The production of ethanol from lignocellulosic sources presents increasingly difficult issues for the global biofuel scenario, leading to increased production costs of current second-generation (2G) ethanol when compared to first-generation (1G) plants. Among the setbacks encountered in industrial processes, the presence of chemical inhibitors from pre-treatment processes severely hinders the potential of yeasts in producing ethanol at peak efficiency. However, some industrial yeast strains have, either naturally or artificially, higher tolerance levels to these compounds. Such is the case of S. cerevisiae SA-1, a Brazilian fuel ethanol industrial strain that has shown high resistance to inhibitors produced by the pre-treatment of cellulosic complexes. Our study focuses on the characterization of the transcriptomic and physiological impact of an inhibitor of this type, p-coumaric acid (pCA), on this strain under chemostat cultivation via RNAseq and quantitative physiological data. It was found that strain SA-1 tend to increase ethanol yield and production rate while decreasing biomass yield when exposed to pCA, in contrast to pCA-susceptible strains, which tend to decrease their ethanol yield and fermentation efficiency when exposed to this substance. This suggests increased metabolic activity linked to mitochondrial and peroxisomal processes. The transcriptomic analysis also revealed a plethora of differentially expressed genes located in co-expressed clusters that are associated with changes in biological pathways linked to biosynthetic and energetical processes. Furthermore, it was also identified 20 genes that act as interaction hubs for these clusters, while also having association with altered pathways and changes in metabolic outputs, potentially leading to the discovery of novel targets for metabolic engineering toward a more robust industrial yeast strain.

Capture Hi-C reveals the influence on dynamic three-dimensional chromosome organization perturbed by genetic variation or vanillin stress in Saccharomyces cerevisiae

Studying the mechanisms of resistance to vanillin in microorganisms, which is derived from lignin and blocks a major pathway of DNA double-strand break repair in yeast, will benefit the design of robust cell factories that produce biofuels and chemicals using lignocellulosic materials. A high vanillin-tolerant Saccharomyces cerevisiae strain EMV-8 carrying site mutations compared to its parent strain NAN-27 was selected for the analyses. The dynamics of the chromatin structure of eukaryotic cells play a critical role in transcription and the regulation of gene expression and thus the phenotype. Consequently, Hi-C and transcriptome analyses were conducted in EMV-8 and NAN-27 in the log phase with or without vanillin stress to determine the effects of mutations and vanillin disturbance on the dynamics of three-dimensional chromosome organization and the influence of the organization on the transcriptome. The outcomes indicated that the chromosome interaction pattern disturbed by vanillin stress or genetic mutations in the log phase was similar to that in mouse cells. The short chromosomes contact the short chromosomes, and the long chromosomes contact the long chromosomes. In response to vanillin stress, the boundaries of the topologically associating domain (TAD) in the vanillin-tolerant strain EMV-8 were more stable than those in its parent strain NAN-27. The motifs of SFL1, STB3, and NHP6A/B were enriched at TAD boundaries in both EMV-8 and NAN-27 with or without vanillin, indicating that these four genes were probably related to TAD formation. The Indel mutation of YRR1, whose absence was confirmed to benefit vanillin tolerance in EMV-8, caused two new interaction sites that contained three genes, WTM2, PUP1, and ALE1, whose overexpression did not affect vanillin resistance in yeast. Overall, our results revealed that in the log phase, genetic mutations and vanillin disturbance have a negligible effect on three-dimensional chromosome organization, and the reformation or disappearance of TAD boundaries did not show an association with gene expression, which provides an example for studying yeast chromatin structure during stress tolerance using Hi-C technology.

Pretreatment Strategies to Enhance Enzymatic Hydrolysis and Cellulosic Ethanol Production for Biorefinery of Corn Stover

There is a rising interest in bioethanol production from lignocellulose such as corn stover to decrease the need for fossil fuels, but most research mainly focuses on how to improve ethanol yield and pays less attention to the biorefinery of corn stover. To realize the utilization of different components of corn stover in this study, different pretreatment strategies were used to fractionate corn stover while enhancing enzymatic digestibility and cellulosic ethanol production. It was found that the pretreatment process combining dilute acid (DA) and alkaline sodium sulfite (ASS) could effectively fractionate the three main components of corn stover, i.e., cellulose, hemicellulose, and lignin, that xylose recovery reached 93.0%, and that removal rate of lignin was 85.0%. After the joint pretreatment of DA and ASS, the conversion of cellulose at 72 h of enzymatic hydrolysis reached 85.4%, and ethanol concentration reached 48.5 g/L through fed-batch semi-simultaneous saccharification and fermentation (S-SSF) process when the final concentration of substrate was 18% (w/v). Pretreatment with ammonium sulfite resulted in 83.8% of lignin removal, and the conversion of cellulose and ethanol concentration reached 86.6% and 50 g/L after enzymatic hydrolysis of 72 h and fed-batch S-SSF, respectively. The results provided a reference for effectively separating hemicellulose and lignin from corn stover and producing cellulosic ethanol for the biorefinery of corn stover.

Effect of cellulase and lactic acid bacteria on the fermentation quality, carbohydrate conversion, and microbial community of ensiling oat with different moisture contents

Oat (Avena sativa L.) is one of the most widely cultivated crops used as forage. The aim of this study was to evaluate the effects of cellulase and Lactobacillus plantarum interactions with different moisture contents on oat ensiling. Oats with three moisture contents were treated with nothing (C), cellulase (CE), lactic acid bacteria (LP), or CE+LP and ensiled for 30 and 60 days. Compared with the control, LP and CE treatments increased crude protein and lactic acid concentrations and reduced the pH and ammonia nitrogen/total nitrogen (NH₃-N/TN) ratios of silages. The addition of CE improved lignocellulosic degradation, compared with approximately 67% (LD) and 81% moisture content (HD) ensiling, CE (CE, CE+LP) ensiling in the approximately 75% moisture content (MD) group retained higher water-soluble carbohydrate, glucose, sucrose and fructose concents. The LP and CE inoculations significantly reduced the microbial community diversity, and lower values for the observed species, ACE, Chao1, and Shannon indices compared with CK-treated samples. Additives inhibited the growth of unfavorable bacteria (such as Clostridium) and increased the abundances of lactic acid bacteria (LAB); the maximum increases in the Lactiplantibacillus abundance were obtained in the LP- and CE+LP-treated samples, improving the microbial community structure in silage. In summary, adding LP and CE effectively improved the oat fermentation quality, and better performances in ensiling oat and lignocellulose degradation were obtained with LP and CE combinations, especially for the MD group of silages that were ensiled for 60 days. The addition of CE and LP at the appropriate moisture content might be helpful for producing high-quality oat silage, and also provide a simple and feasible method to enhance the effects of bacteria and enzymes.

Valorization of sawdust by mineral acid assisted hydrothermal carbonization for the adsorptive removal of bisphenol A: A greener approach

sawdust was valorized using acid-assisted hydrothermal carbonization and used in the removal of endocrine disruptor bisphenol A (BPA). The effect of acid addition on the hydrothermal carbonization of sawdust and removal of BPA was studied. Two different hydrochars were prepared using deionized water (HC_D) and hydrochloric acid solution (HC_AH) as feed water. The prepared hydrochars were characterized using FESEM, EDS, XRD, Raman spectroscopy, FTIR, TGA, and surface area analysis to study the structural and functional changes. Then they were compared in the removal of bisphenol A. Out of the two hydrochars prepared, acid-assisted hydrothermal carbonized hydrochar (HC_AH) showed better removal efficiency. Hence, HC_AH was used to study the influence of different parameters like pH, adsorbent dosage, and initial bisphenol A concentration by one variable at a time approach. Further, the study of interactive effects and optimization of adsorption of bisphenol A onto HC_AH was carried out using RSM-CCD. The isotherm, kinetics, and thermodynamic studies revealed that the adsorption of bisphenol A could be explained by the Freundlich isotherm, pseudo-second-order kinetics fitted well in all the initial BPA concentrations, and the adsorption of bisphenol A onto HC_AH was exothermic and spontaneous.

Influence of Pine and Alder Woodchips Storage Method on the Chemical Composition and Sugar Yield in Liquid Biofuel Production

The aim of this study was to investigate the effect of storing methods of woodchips from two species, pine (Pinus sylvestris L.) and alder (Alnus Mill.), on the basic chemical composition and sugar yield in liquid biofuel production. Two methods of storing woody biomass were used in the study—an open pile and a cover pile. The wood was felled at the end of November and was stored as industrial chips for eight months from December onward. After this time, material was collected for chemical composition analyses and enzymatic hydrolysis. The results of the chemical composition analysis of the wood for both studied species showed the influence of the type of storage on the composition of the individual structural components of the wood. Based on the results of the enzymatic hydrolysis of the woody biomass, it can be seen that, irrespective of the hydrolysed material (wood, cellulose, holocellulose), the material from the biomass stored in the open pile gave higher results. The hydrolysis efficiency also increased with time, independent of the type of material that was hydrolysed. The highest sugar yield from the enzymatic hydrolysis of wood was obtained for alder wood stored in an open pile. The highest sugar yield from the enzymatic hydrolysis of cellulose was obtained for cellulose extracted from alder wood—as well—that had been stored in an open pile.

Selection of pretreatment method and mannanase enzyme to improve the functionality of palm kernel cake

Palm kernel cake (PKC) is a by-product of palm kernel oil extraction with moderate nutritional value, containing 30-35% β-mannan, which is indigestible, slows growth, and reduces feed efficiency. PKC can be improved by mannanase hydrolysis, but the effectiveness of mannanase is dependent on the microbial source. Thus, the effect of steam pretreatment and bacterial mannanases on PKC quality was investigated. PKC was pretreated by steaming and hydrolyzed in the small intestine by various mannanases. The contents of reducing sugar, total sugar, and protein release were measured. Steamed PKC had a significant increase in protein (16.95 ± 0.14 to 20.98 ± 0.13%) and a substantial decrease in hemicellulose (29.52 ± 0.44 to 3.46 ± 0.88%) and lignin (8.94 ± 0.28 to 1.40 ± 0.22%). Mannanases from Escherichia coli-KMAN-3 and E. coli-Man6.7 recorded the highest activities, followed by commercial mannanase, Bacillus circulans NT6.7 and B. amyloliquefaciens NT6.3 mannanases, orderly. B. circulans NT6.7 and B. amyloliquefaciens NT6.3 had multi-activities that include glucanase (3.10 ± 0.04% and 2.47 ± 0.02%) and amylase (1.74 ± 0.03% and 1.38 ± 0.04%), respectively. B. amyloliquefaciens NT6.3 mannanase hydrolyzed steamed PKC to release more reducing sugar, total sugar, and protein than hydrolyzed raw PKC. In raw and steamed PKC, B. amyloliquefaciens NT6.3 mannanase produced the highest reducing sugar release. As a result, steam pretreatment and mannanase hydrolysis, particularly from B. amyloliquefaciens, can be used to increase the functioning of PKC and develop new feed ingredients for monogastric animals at a reasonable cost.

High-Efficiency and High-Quality Extraction of Hemicellulose of Bamboo by Freeze-Thaw Assisted Two-Step Alkali Treatment

Hemicellulose is a major component of the complex biomass recalcitrance structure of fiber cell walls. Even though biomass recalcitrance protects plants, it affects the effective utilization of lignocellulosic biomass resources. Therefore, the separation and extraction of hemicellulose is very important. In this study, an improved two-step alkali pretreatment method was proposed to separate hemicellulose efficiently. Firstly, 16.61% hemicellulose was extracted from bamboo by the weak alkali treatment. Then, the physical freezing and the alkali treatment were carried out by freezing at −20 °C for 12.0 h and thawing at room temperature, heating to 80 °C, and treating with 5.0% sodium hydroxide for 90 min; the extraction yield of hemicellulose reached 73.93%. The total extraction yield of the two steps was 90.54%, and the molecular weight and purity reached 44,865 g·mol–1 and 89.60%, respectively. It provides a new method for breaking the biomass recalcitrance of wood fiber resources and effectively extracting hemicellulose.

Assessment of the Pretreatments and Bioconversion of Lignocellulosic Biomass Recovered from the Husk of the Cocoa Pod

The production of biofuels (biogas, ethanol, methanol, biodiesel, and solid fuels, etc.), beginning with cocoa pod husk (CPH), is a way for obtaining a final product from the use of the principal waste product of the cocoa industry. However, there are limitations to the bioconversion of the material due to its structural components (cellulose, hemicellulose, and lignin). Currently, CPH pretreatment methods are considered a good approach towards the improvement of both the degradation process and the production of biogas or ethanol. The present document aims to set out the different methods for pretreating lignocellulosic material, which are: physical (grinding and extrusion, among others); chemical (acids and alkaline); thermochemical (pyrolysis); ionic liquid (salts); and biological (microorganism) to improve biofuel production. The use of CPH as a substrate in bioconversion processes is a viable and promising option, despite the limitations of each pretreatment method.

Production of flavor compounds from rice bran by yeasts metabolisms of Kluyveromyces marxianus and Debaryomyces hansenii

The aim of this study was to evaluate the biosynthesis of flavor compounds from rice bran by fermentation facilitated by Kluyveromyces marxianus and Debaryomyces hansenii. The growth of both yeasts was assessed by specific growth rates and doubling time. The biosynthesis of flavor compounds was evaluated by gas chromatography-olfactometry (GC-O), gas chromatography-mass spectrometry (GC-MS), and Spectrum™ sensory analysis. The specific growth rate (µ) and doubling time (t_d) of K. marxianus was calculated as 0.16/h and 4.21h, respectively, whereas that of D. hansenii was determined as 0.13/h and 5.33h, respectively. K. marxianus and D. hansenii produced significant levels of higher alcohols and acetate esters from rice bran. Results showed that K. marxianus can produce 827.27 µg/kg of isoamyl alcohol, 169.77 µg/kg of phenyl ethyl alcohol, and 216.08 µg/kg of phenyl ethyl acetate after 24-h batch fermentation. A significant amount of isovaleric acid was also synthesized by K. marxianus (4013 µg/kg) after the batch fermentation of 96 h. 415.64 µg/kg of isoamyl alcohol and 135.77 µg/kg of phenyl ethyl acetate was determined in rice bran fermented by D. hansenii after 24-h fermentation. Fermented cereals and rose were the characteristic flavor descriptors of the fermented rice bran samples. Rose flavor in fermented rice bran samples was found to be associated with phenyl ethyl alcohol, phenyl ethyl acetate, isoamyl acetate, and guaiacol. Thus, the findings of this study demonstrate that the valorization of rice bran can be achieved with the production of natural flavor compounds by yeast metabolism.

An Experimental Study on the Hot Alkali Extraction of Xylan-Based Hemicelluloses from Wheat Straw and Corn Stalks and Optimization Methods

In this paper, we describe an experimental study on the hot alkali extraction of hemicelluloses from wheat straw and corn stalks, two of the most common lignocellulosic biomass constituents in Romania. The chemical compositions of the raw materials were determined analytically, and the relevant chemical components were cellulose, hemicelluloses, lignin, and ash. Using the response surface methodology, the optimum values of the hot alkaline extraction parameters, i.e., time, temperature, and NaOH concentration, were identified and experimentally validated. The physicochemical characterization of the isolated hemicelluloses was performed using HPLC, FTIR, TG, DTG, and 1H-NMR spectroscopy. The main hemicellulose components identified experimentally were xylan, arabinan, and glucan. The study emphasizes that both corn stalks and wheat straw are suitable as raw materials for hemicellulose extraction, highlighting the advantages of alkaline pretreatments and showing that optimization methods can further improve the process efficiency.

The application of green solvent in a biorefinery using lignocellulosic biomass as a feedstock

The high dependence on crude oil for energy utilization leads to a necessity of finding alternative sustainable resources. Solvents are often employed in valorizing the biomass into bioproducts and other value-added chemicals during treatment stages. Unfortunately, despite the effectiveness of conventional solvents, hindrances such as expensive solvents, unfavourable environmental ramifications, and complicated downstream separation systems often occur. Therefore, the scientific community has been actively investigating more cost-effective, environmentally friendly alternatives and possess the excellent dissolving capability for biomass processing. Generally, 'green' solvents are attractive due to their low toxicity, economic value, and biodegradability. Nonetheless, green solvents are not without disadvantages due to their complicated product recovery, recyclability, and high operational cost. This review summarizes and evaluates the recent contributions, including potential advantages, challenges, and drawbacks of green solvents, namely ionic liquids, deep eutectic solvents, water, biomass-derived solvents and carbon dioxide in transforming the lignocellulosic biomass into high-value products. Moreover, research opportunities for future developments and potential upscale implementation of green solvents are also critically discussed.

Advancement of biorefinery-derived platform chemicals from macroalgae: a perspective for bioethanol and lactic acid

The extensive growth of energy and plastic demand has raised concerns over the depletion of fossil fuels. Moreover, the environmental conundrums worldwide integrated with global warming and improper plastic waste management have led to the development of sustainable and environmentally friendly biofuel (bioethanol) and biopolymer (lactic acid, LA) derived from biomass for fossil fuels replacement and biodegradable plastic production, respectively. However, the high production cost of bioethanol and LA had limited its industrial-scale production. This paper has comprehensively reviewed the potential and development of third-generation feedstock for bioethanol and LA production, including significant technological barriers to be overcome for potential commercialization purposes. Then, an insight into the state-of-the-art hydrolysis and fermentation technologies using macroalgae as feedstock is also deliberated in detail. Lastly, the sustainability aspect and perspective of macroalgae biomass are evaluated economically and environmentally using a developed cascading system associated with techno-economic analysis and life cycle assessment, which represent the highlights of this review paper. Furthermore, this review provides a conceivable picture of macroalgae-based bioethanol and lactic acid biorefinery and future research directions that can be served as an important guideline for scientists, policymakers, and industrial players.

Graphical abstract

Effects of Colloid Milling and Hot-Water Pretreatment on Physical Properties and Enzymatic Digestibility of Oak Wood

A two-step process using colloid milling (CM) and hot water (HW) treatment was evaluated for its ability to improve xylose recovery and the enzymatic digestibility of oak wood. In the first step, CM pretreatment was applied at a milling (feeding) speed of 100 mL/min with four different milling times (3, 6, 9, and 12 h), and the enzymatic digestibility and physical properties of each substrate were measured. In the second-step, the HW pretreatment was applied to enhance the enzymatic digestibility and xylan recovery at various reaction severities (Log R0) from 2.07 to 4.43 using 12 h colloid-milled (CM-treated) oak wood. Compared with untreated oak wood, CM not only significantly disrupted the structure of oak wood but also increased its Brunauer–Emmett–Teller surface area (42-fold) and pore volume (28-fold). The crystallinity of two-step-treated oak wood was decreased to 34.8, while the enzymatic digestibility of 12 h CM-treated oak wood was increased to 58.1% at enzyme loading of 30 filter paper units (FPU)/g glucan for 96 h. After HW treatment of CM-treated oak wood at Log R0 = 3.83, 80.7% of xylan recovery yield and 91.1% of enzymatic digestibility (with 15 FPU/g glucan at 96 h) was obtained, which was 84.2% higher than the enzymatic digestibility of untreated oak wood (6.9%).

A Comparative Study of Various Pretreatment Approaches for Bio-Ethanol Production from Willow Sawdust, Using Co-Cultures and Mono-Cultures of Different Yeast Strains

The effect of different pretreatment approaches based on alkali (NaOH)/hydrogen peroxide (H₂O₂) on willow sawdust (WS) biomass, in terms of delignification efficiency, structural changes of lignocellulose and subsequent fermentation toward ethanol, was investigated. Bioethanol production was carried out using the conventional yeast Saccharomyces cerevisiae, as well as three non-conventional yeasts strains, i.e., Pichia stipitis, Pachysolen tannophilus, Wickerhamomyces anomalus X19, separately and in co-cultures. The experimental results showed that a two-stage pretreatment approach (NaOH (0.5% w/v) for 24 h and H₂O₂ (0.5% v/v) for 24 h) led to higher delignification (38.3 ± 0.1%) and saccharification efficiency (31.7 ± 0.3%) and higher ethanol concentration and yield. Monocultures of S. cerevisiae or W. anomalus X19 and co-cultures with P. stipitis exhibited ethanol yields in the range of 11.67 ± 0.21 to 13.81 ± 0.20 g/100 g total solids (TS). When WS was subjected to H₂O₂ (0.5% v/v) alone for 24 h, the lowest ethanol yields were observed for all yeast strains, due to the minor impact of this treatment on the main chemical and structural WS characteristics. In order to decide which is the best pretreatment approach, a detailed techno-economical assessment is needed, which will take into account the ethanol yields and the minimum processing cost.

Overview of pretreatment technologies on vegetable, fruit and flower market wastes disintegration and bioenergy potential: Indian scenario

Disposal of segregated organic fractions of centralized wholesale market wastes (i.e. vegetable, fruit and flower markets waste) in dumpsites/landfills are not only a serious issue but also underutilizes the huge potency of these organic wastes. Anaerobic digestion (AD) is a promising technology for converting organic wastes into methane, as a carbon-neutral alternative to conventional fuels. The major challenges related to the AD process are poor biodegradation of wastes and buffering capacity within the anaerobic digester that lowers the biogas yield. To accelerate biodegradation and to enhance the process efficacy of anaerobic digestion, several pretreatment technologies (mechanical, thermal, biological, chemical and combined pre-treatments) for organic wastes prior to the AD process were developed. This review article presents a comprehensive analysis of research updates in pretreatment techniques for vegetable, fruit and flower markets wastes for enhancing biogas yields during the AD process. The technological aspects of the pretreatment process are described and their efficiency comparison with the resultant process yields and environmental benefits are also discussed. The challenges and technical issues associated with each pretreatment and future research directions for overcoming the field implementation issues are also proposed.

Hydrothermal pretreatment technologies for lignocellulosic biomass: A review of steam explosion and subcritical water hydrolysis

The pretreatment of lignocellulosic biomass enhances the conversion efficiency to produce biofuels and value-added chemicals, which have the potential to replace fossil fuels. Compared to physicochemical and other pretreatment techniques, the hydrothermal methods are considered eco-friendly and cost-effective. This paper reviews the strengths, weaknesses, opportunities and threats of steam explosion and subcritical water hydrolysis as the two promising hydrothermal technologies for the pretreatment of lignocellulosic biomass. Although the principle of the steam explosion in depolymerizing the lignin and exposing the cellulose fibers for bioconversion to liquid fuels is well known, its underlying mechanism for solid biofuel production is less identified. Therefore, this review provides an insight into different operating conditions of steam explosion and subcritical water hydrolysis for a wide variety of feedstocks. The mechanisms of subcritical water hydrolysis including dehydration, decarboxylation and carbonization of waste biomass are comprehensively described. Finally, the role of microwave heating in the hydrothermal pretreatment of biomass is elucidated.

Enhanced Energy Recovery from Food Waste by Co-Production of Bioethanol and Biomethane Process

The primary objective of this research is to study ways to increase the potential of energy production from food waste by co-production of bioethanol and biomethane. In the first step, the food waste was hydrolysed with an enzyme at different concentrations. By increasing the concentration of enzyme, the amount of reducing sugar produced increased, reaching a maximum amount of 0.49 g/g food waste. After 120 h of fermentation with Saccharomyces cerevisiae, nearly all reducing sugars in the hydrolysate were converted to ethanol, yielding 0.43–0.50 g ethanol/g reducing sugar, or 84.3–99.6% of theoretical yield. The solid residue from fermentation was subsequently subjected to anaerobic digestion, allowing the production of biomethane, which reached a maximum yield of 264.53 ± 2.3 mL/g VS. This results in a gross energy output of 9.57 GJ, which is considered a nearly 58% increase in total energy obtained, compared to ethanol production alone. This study shows that food waste is a raw material with high energy production potential that could be further developed into a promising energy source. Not only does this benefit energy production, but it also lowers the cost of food waste disposal, reduces greenhouse gas emissions, and is a sustainable energy production approach.

Acid-based lignocellulosic biomass biorefinery for bioenergy production: Advantages, application constraints, and perspectives

The production of chemicals and fuels from renewable biomass with the primary aim of reducing carbon footprints has recently become one of the central points of interest. The use of lignocellulosic biomass for energy production is believed to meet the main criteria of maximizing the available global energy source and minimizing pollutant emissions. However, before usage in bioenergy production, lignocellulosic biomass needs to undergo several processes, among which biomass pretreatment plays an important role in the yield, productivity, and quality of the products. Acid-based pretreatment, one of the existing methods applied for lignocellulosic biomass pretreatment, has several advantages, such as short operating time and high efficiency. A thorough analysis of the characteristics of acid-based biomass pretreatment is presented in this review. The environmental concerns and future challenges involved in using acid pretreatment methods are discussed in detail to achieve clean and sustainable bioenergy production. The application of acid to biomass pretreatment is considered an effective process for biorefineries that aim to optimize the production of desired products while minimizing the by-products.

Net Energy Analysis and Techno-Economic Assessment of Co-Production of Bioethanol and Biogas from Cellulosic Biomass

Co-production is a process based on the biorefinery concept that maximizes the benefit of biomass by reusing residue from the production of one product to produce others. In this regard, biogas is one of the most researched second products for the production of ethanol from cellulosic biomass. However, operating this scheme requires additional investment in biogas processing equipment. This review compiles data from research studies on the co-production of bioethanol and biogas from lignocellulosic biomass to determine which is more worthwhile: leaving the residue or investing more to benefit from the second product. According to previous research, ethanol stillage can be converted to biogas via anaerobic digestion, increasing energy output by 2–3 fold. Techno-economic studies demonstrated that the co-production process reduces the minimum ethanol selling price to a level close to the market price of ethanol, implying the possibility of industrializing cellulosic ethanol production through this scheme.

In silico characterization of the GH5-cellulase family from uncultured microorganisms: physicochemical and structural studies

BACKGROUND

Hydrolysis of cellulose-based biomass by cellulases produce fermented sugar for making biofuels, such as bioethanol. Cellulases hydrolyze the β-1,4-glycosidic linkage of cellulose and can be obtained from cultured and uncultured microorganisms. Uncultured microorganisms are a source for exploring novel cellulase genes through the metagenomic approach. Metagenomics concerns the extraction, cloning, and analysis of the entire genetic complement of a habitat without cultivating microbes. The glycoside hydrolase 5 family (GH5) is a cellulase family, as the largest group of glycoside hydrolases. Numerous variants of GH5-cellulase family have been identified through the metagenomic approach, including CelGH5 in this study. University-CoE-Research Center for Biomolecule Engineering, Universitas Airlangga successfully isolated CelGH5 from waste decomposition of oil palm empty fruit bunches (OPEFB) soil by metagenomics approach. The properties and structural characteristics of GH5-cellulases from uncultured microorganisms can be studied using computational tools and software.

RESULTS

The GH5-cellulase family from uncultured microorganisms was characterized using standard computational-based tools. The amino acid sequences and 3D-protein structures were retrieved from the GenBank Database and Protein Data Bank. The physicochemical analysis revealed the sequence length was roughly 332-751 amino acids, with the molecular weight range around 37-83 kDa, dominantly negative charges with pI values below 7. Alanine was the most abundant amino acid making up the GH5-cellulase family and the percentage of hydrophobic amino acids was more than hydrophilic. Interestingly, ten endopeptidases with the highest average number of cleavage sites were found. Another uniqueness demonstrated that there was also a difference in stability between in silico and wet lab. The II values indicated CelGH5 and ACA61162.1 as unstable enzymes, while the wet lab showed they were stable at broad pH range. The program of SOPMA, PDBsum, ProSA, and SAVES provided the secondary and tertiary structure analysis. The predominant secondary structure was the random coil, and tertiary structure has fulfilled the structure quality of QMEAN4, ERRAT, Ramachandran plot, and Z score.

CONCLUSION

This study can afford the new insights about the physicochemical and structural properties of the GH5-cellulase family from uncultured microorganisms. Furthermore, in silico analysis could be valuable in selecting a highly efficient cellulases for enhanced enzyme production.

Valorization of sorghum distillery residue to produce bioethanol for pollution mitigation and circular economy

This research aims to study the wet torrefaction (WT) and saccharification of sorghum distillery residue (SDR) towards hydrochar and bioethanol production. The experiments are designed by Box-Behnken design from response surface methodology where the operating conditions include sulfuric acid concentration (0, 0.01, and 0.02 M), amyloglucosidase concentration (36, 51, and 66 IU), and saccharification time (120, 180, and 240 min). Compared to conventional dry torrefaction, the hydrochar yield is between 13.24 and 14.73%, which is much lower than dry torrefaction biochar (yield >50%). The calorific value of the raw SDR is 17.15 MJ/kg, which is significantly enhanced to 22.36-23.37 MJ/kg after WT. When the sulfuric acid concentration increases from 0 to 0.02 M, the glucose concentration in the product increases from 5.59 g/L to 13.05 g/L. The prediction of analysis of variance suggests that the best combination to maximum glucose production is 0.02 M H₂SO₄, 66 IU enzyme concentration, and 120 min saccharification time, and the glucose concentration is 30.85 g/L. The maximum bioethanol concentration of 19.21 g/L is obtained, which is higher than those from wheat straw (18.1 g/L) and sweet sorghum residue (16.2 g/L). A large amount of SDR is generated in the kaoliang liquor production process, which may cause environmental problems if it is not appropriately treated. This study fulfills SDR valorization for hydrochar and bioenergy to lower environmental pollution and even achieve a circular economy.

Valorization Potential of a Novel Bacterial Strain, Bacillus altitudinis RSP75, towards Lignocellulose Bioconversion: An Assessment of Symbiotic Bacteria from the Stored Grain Pest, Tribolium castaneum

Bioconversion of lignocellulose into renewable energy and commodity products faces a major obstacle of inefficient saccharification due to its recalcitrant structure. In nature, lignocellulose is efficiently degraded by some insects, including termites and beetles, potentially due to the contribution from symbiotic gut bacteria. To this end, the presented investigation reports the isolation and characterization of cellulolytic bacteria from the gut system of red flour beetle, Tribolium castaneum. Out of the 15 isolated bacteria, strain RSP75 showed the highest cellulolytic activities by forming a clearance zone of 28 mm in diameter with a hydrolytic capacity of ~4.7. The MALDI-TOF biotyping and 16S rRNA gene sequencing revealed that the strain RSP75 belongs to Bacillus altitudinis. Among the tested enzymes, B. altitudinis RSP75 showed maximum activity of 63.2 IU/mL extract for xylanase followed by β-glucosidase (47.1 ± 3 IU/mL extract) which were manifold higher than previously reported activities. The highest substrate degradation was achieved with wheat husk and corn cob powder which accounted for 69.2% and 54.5%, respectively. The scanning electron microscopy showed adhesion of the bacterial cells with the substrate which was further substantiated by FTIR analysis that depicted the absence of the characteristic cellulose bands at wave numbers 1247, 1375, and 1735 cm^-1 due to hydrolysis by the bacterium. Furthermore, B. altitudinis RSP75 showed co-culturing competence with Saccharomyces cerevisiae for bioethanol production from lignocellulose as revealed by GC-MS analysis. The overall observations signify the gut of T. castaneum as a unique and impressive reservoir to prospect for lignocellulose-degrading bacteria that can have many biotechnological applications, including biofuels and biorefinery.

Conversion of Lignocellulose for Bioethanol Production, Applied in Bio-Polyethylene Terephthalate

The increasing demand for petroleum-based polyethylene terephthalate (PET) grows population impacts daily. A greener and more sustainable raw material, lignocellulose, is a promising replacement of petroleum-based raw materials to convert into bio-PET. This paper reviews the recent development of lignocellulose conversion into bio-PET through bioethanol reaction pathways. This review addresses lignocellulose properties, bioethanol production processes, separation processes of bioethanol, and the production of bio-terephthalic acid and bio-polyethylene terephthalate. The article also discusses the current industries that manufacture alcohol-based raw materials for bio-PET or bio-PET products. In the future, the production of bio-PET from biomass will increase due to the scarcity of petroleum-based raw materials.

Biodiesel Production From Lignocellulosic Biomass Using Oleaginous Microbes: Prospects for Integrated Biofuel Production

Biodiesel is an eco-friendly, renewable, and potential liquid biofuel mitigating greenhouse gas emissions. Biodiesel has been produced initially from vegetable oils, non-edible oils, and waste oils. However, these feedstocks have several disadvantages such as requirement of land and labor and remain expensive. Similarly, in reference to waste oils, the feedstock content is succinct in supply and unable to meet the demand. Recent studies demonstrated utilization of lignocellulosic substrates for biodiesel production using oleaginous microorganisms. These microbes accumulate higher lipid content under stress conditions, whose lipid composition is similar to vegetable oils. In this paper, feedstocks used for biodiesel production such as vegetable oils, non-edible oils, oleaginous microalgae, fungi, yeast, and bacteria have been illustrated. Thereafter, steps enumerated in biodiesel production from lignocellulosic substrates through pretreatment, saccharification and oleaginous microbe-mediated fermentation, lipid extraction, transesterification, and purification of biodiesel are discussed. Besides, the importance of metabolic engineering in ensuring biofuels and biorefinery and a brief note on integration of liquid biofuels have been included that have significant importance in terms of circular economy aspects.

Enzymatic Hydrolysis and Fermentation of Banana Pseudostem Hydrolysate to Produce Bioethanol

Banana pseudostem (BPS) is an agricultural waste with a high holocellulose content, which, upon hydrolysis, releases fermentable sugars that can be used for bioethanol production. Different pretreatment methods, namely, 3% (w/v) NaOH, 5% (v/v) H₂SO₄, and liquid hot water, applied on the BPS resulted in the availability of 52%, 48%, and 25% cellulose after treatment, respectively. Saccharification of the pretreated BPS with 10 FPU/g dry solids (29.3 mg protein/g d.s) crude enzyme from Trichoderma harzianum LMLBP07 13-5 at 50°C and a substrate loading of 10 to 15% released 3.8 to 21.8 g/L and from T. longibrachiatum LMLSAUL 14-1 released 5.4 to 43.5 g/L glucose to the biomass. Ethanol was produced through separate hydrolysis and fermentation (SHF) of alkaline pretreated BPS hydrolysate using Saccharomyces cerevisiae UL01 at 30°C and 100 rpm. Highest ethanol produced was 17.6 g/L. Banana pseudostem was shown as a potentially cheap substrate for bioethanol production.

Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents

Biomass wastes exhibit a great potential to be used as a source of non-depleting renewable energy and synthesis of value-added products. The key to the valorization of excess lignocellulosic biomass wastes in the world lies on the pretreatment process to recalcitrant barrier of the lignocellulosic material for the access to useful substrates. A wide range of pretreatment techniques are available and advances in this field is continuously happening, in search for cheap, effective, and environmentally friendly methods. This review starts with an introduction to conventional approaches and green solvents for pretreatment of lignocellulosic biomass. Subsequently, the mechanism of actions along with the advantages and disadvantages of pretreatment techniques were reviewed. The roles of choline chloride (ChCl) in green solvents and their potential applications were also comprehensively reviewed. The collection of ideas in this review serve as an insight for future works or interest on biomass-to-energy conversion using green solvents.

Process intensification of the ionoSolv pretreatment: effects of biomass loading, particle size and scale-up from 10 mL to 1 L

The ionoSolv process is one of the most promising technologies for biomass pretreatment in a biorefinery context. In order to evaluate the transition of the ionoSolv pretreatment of biomass from bench-scale experiments to commercial scale, there is a need to get better insight in process intensification. In this work, the effects of biomass loading, particle size, pulp washing protocols and 100-fold scale up for the pretreatment of the grassy biomass Miscanthus giganteus with the IL triethylammonium hydrogen sulfate, [TEA][HSO4], are presented as a necessary step in that direction. At the bench scale, increasing biomass loading from 10 to 50 wt% reduced glucose yields from 68 to 23% due to re-precipitation of lignin onto the pulp surface. Omitting the pulp air-drying step maintained saccharification yields at 66% at 50 wt% loading due to reduced fiber hornification. 100-fold scale-up (from 10 mL to 1 L) improved the efficacy of ionoSolv pretreatment and increasing loadings from 10 to 20 wt% reduced lignin reprecipitation and led to higher glucose yields due to the improved heat and mass transfer caused by efficient slurry mixing in the reactor. Pretreatment of particle sizes of 1-3 mm was more effective than fine powders (0.18-0.85 mm) giving higher glucose yields due to reduced surface area available for lignin re-precipitation while reducing grinding energy needs. Stirred ionoSolv pretreatment showed great potential for industrialization and further process intensification after optimization of the pretreatment conditions (temperature, residence time, stirring speed), particle size and biomass loading. Pulp washing protocols need further improvement to reduce the incidence of lignin precipitation and the water requirements of lignin washing.

A review of nanocellulose as a new material towards environmental sustainability

Synthetic polymers, commonly referred to as plastics, are anthropogenic contaminants that adversely affect the natural ecosystems. The continuous disposal of long lifespan plastics has resulted in the accumulation of plastic waste, leading to significant pollution of both marine and terrestrial habitats. Scientific pursuit to seek environment-friendly materials from renewable resources has focused on cellulose, the primary reinforcement component of the cell wall of plants, as it is the most abundantly available biopolymer on earth. This paper provides an overview on the current state of science on nanocellulose research; highlighting its extraction procedures from lignocellulosic biomass. Literature shows that the process used to obtain nanocellulose from lignocellulosic biomass greatly influences its morphology, properties and surface chemistry. The efficacy of chemical methods that use alkali, acid, bleaching agents, ionic liquids, deep eutectic solvent for pre-treatment of biomass is discussed. There has been a continuous endeavour to optimize the pre-treatment protocol as it is specific to lignocellulosic biomass and also depends on factors such as nature of the biomass, process and environmental parameters and economic viability. Nanofibers are primarily isolated through mechanical fibrillation while nanocrystals are predominantly extracted using acid hydrolysis. A concise overview on the ways to improve the yield of nanocellulose from cellulosic biomass is also presented in this review. This work also reviews the techniques used to modify the surface properties of nanocellulose by functionalizing surface hydroxyl groups to impart desirable hydrophilic-hydrophobic balance. An assessment on the emerging application of nanocellulose with an emphasis on development of nanocomposite materials for designing environmentally sustainable products is incorporated. Finally, the status of the industrial production of nanocellulose presented, which indicates that there is a continuously increased demand for cellulose nanomaterials. The demand for cellulose is expected to increase further due to its increasing and broadening applications.

Transcriptomics analysis reveals the high biodegradation efficiency of white-rot fungus Phanerochaete sordida YK-624 on native lignin

Lignocellulosic biomass is an organic matrix composed of cellulose, hemicellulose, and lignin. In nature, lignin degradation by basidiomycetes is the key step in lignocellulose decay. The white-rot fungus Phanerochaete sordida YK-624 (YK-624) has been extensively studied due to its high lignin degradation ability. It was demonstrated that YK-624 can secrete lignin peroxidase and manganese peroxidase for lignin degradation. However, the underlying mechanism for lignin degradation by YK-624 remains unknown. Here, we analyzed YK-624 gene expression following growth under ligninolytic and nonligninolytic conditions and compared the differentially expressed genes in YK-624 to those in the model white-rot fungus Phanerochaete chrysosporium by next-generation sequencing. More ligninolytic enzymes and lignin-degrading auxiliary enzymes were upregulated in YK-624. This might explain the high degradation efficiency of YK-624. In addition, the genes involved in energy metabolism pathways such as the TCA cycle, lipid metabolism, carbon metabolism and glycolysis were upregulated under ligninolytic conditions in YK-624. The first differential gene expression analysis of YK-624 under ligninolytic and nonligninolytic conditions was reported in this study. The results obtained in this study indicated that YK-624 produces more enzymes involved in lignin degradation and energy metabolism.

Obtaining lignocellulosic biomass-based catalysts and their catalytic activity in cellobiose hydrolysis and acetic acid esterification reactions

Global challenges prompt the world to modify its strategies and shift from a fossil-fuel-based economy to a bio-resource-based one with the production of renewable biomass chemicals. Different processes exist that allow the transformation of raw biomass into desirable bio-based products and/or energy. In this work different biochars that were obtained as a by-product from birch chip fast pyrolysis and carbonization were used as is or chemically/physically treated. These sulfonated carbon catalysts were compared to a commercially available sulfonated styrene-divinylbenzene macroreticular resin (Dowex 50W X8). Characterisation (water content and pH value, FTIR, base titration, element analysis and N2 desorption) was done to evaluate the obtained sulfonated biocarbon catalysts. Catalytic activity was tested using cellobiose (CB) hydrolysis and acetic acid esterification. For the catalytic CB hydrolysis, we tested the reaction temperature, time and CB and catalyst mass ratios. The determined optimal conditions were 120 °C and 24 h, with CB and catalyst mass ratio 1 : 5. The highest glucose yield was observed for biochar obtained from the birch chip fast pyrolysis process (BC_Py-H2SO4) - 92% within 24 h for 120 °C. Comparably high glucose yield was observed for biochar that was obtained in birch chip carbonization (BC_Carbon-H2SO4) - 86% within 24 h for 120 °C.

Detoxification of sisal bagasse hydrolysate using activated carbon produced from the gasification of açaí waste

Due to its recalcitrance and difficult disruption, biomass requires severe treatment conditions to produce bioproducts. These processes also generate substances that inhibit microbial metabolism, resulting in low conversion of sugars into bioproducts. To minimize this, in this work the sisal bagasse acid hydrolysate was detoxified using the activated carbon obtained from residues of the gasification of açaí endocarp. The adsorbent properties were analyzed, and the effects of experimental parameters related to furfural adsorption were evaluated. Then, the validation of the adsorption experiments was carried out in acid hydrolyzed liquor from sisal bagasse, the fermentation tests being performed with Saccharomyces cerevisiae. Overall, the furfural adsorption in the activated carbon was fast since most of the furfural was removed in the first minutes of the experiment. The Sips isotherm fit the experimental data best, with maximum adsorption capacity of 48.02 mg.g^-1. Kinetic data fitted LDF, QDF and FD models, and diffusivity parameters were obtained. After detoxification, the activated carbon from açaí waste removed 52% of furfural, 100% of HMF and 40.4% of acetic acid with moderate loss of sugars (17%). The results confirmed that the adsorbent is effective and promising for removing furfural and other fermentation inhibitors.

Integrated process simulation for bioethanol production: Effects of varying lignocellulosic feedstocks on technical performance

Variations in lignocellulosic feedstock composition can influence conversion performance of bioethanol production, but such effects are overlooked in several studies that rely on standard conversion factors. This study investigates the effects of seven lignocellulosic feedstocks (belonging to the categories energy crops, forest and agricultural residues) on mass, carbon, water and energy balances for biochemical bioethanol production, including a comparison of individual process step yields. We find that overall bioethanol yields vary considerably, ranging between 19.0 and 29.0%, 27.3 and 46.2%, and 19.0 and 31.0%, for energy and carbon efficiency, respectively. The highest yields are found for switchgrass, which has the largest carbohydrate content, and the lowest for forest residues (spruce). Feedstock composition also affects water and carbon balances. Overall, the type of biomass influences conversion performances, thereby calling for explicit representation of the effects of biomass types in technical, economic and environmental assessment studies of bioethanol production.