Rapid detection of neutral lipid in green microalgae by flow cytometry in combination with Nile red staining—an improved technique

Cultivation and nutritional characteristics of Chlorella vulgaris cultivated using Martian regolith and synthetic urine

Long-term spatial missions will require sustainable methods for biomass production using locally available resources. This study investigates the feasibility of cultivating Chlorella vulgaris, a high value microalgal specie, using a leachate of Martian regolith and synthetic human urine as nutrient sources. The microalga was grown in a standard medium (BBM) mixed with 0, 20, 40, 60, or 100 % Martian medium (MM). MM did not significantly affect final biomass concentrations. Total carbohydrate and protein contents decreased with increasing MM fractions between 0 % and 60 %, but biomass in the 100% MM showed the highest levels of carbohydrates and proteins (25.2 ± 0.9 % and 37.1 ± 1.4 % of the dry weight, respectively, against 19.0 ± 1.7 % and 32.0 ± 2.7 % in the absence of MM). In all MM-containing media, the fraction of the biomass represented by total lipids was lower (by 3.2 to 4.5%) when compared to BBM. Conversely, total carotenoids increased, with the highest value (97.3 ± 1.5 mg/100 g) measured with 20% MM. In a three-dimensional principal component analysis of triacylglycerols, samples clustered according to growth media; a strong impact of growth media on triacylglycerol profiles was observed. Overall, our findings suggest that microalgal biomass produced using regolith and urine can be used as a valuable component of astronauts' diet during missions to Mars.

Application of Response Surface Methodology (RSM) in the statistical evaluation of biodiesel production from the neutral lipids of the Coelastrella-Nannochloropsis consortium

The paramount challenge in economically workable microalgal biodiesel production is the selection of a competent catalyst to improve the fatty acid methyl ester yield with desirable fatty acid composition. Though countless researchers have explored different homogeneous and heterogeneous catalysts to improve the transesterification efficacy, achieving greater biodiesel production from the neutral lipids of the microalgal consortium using a statistical tool, response surface methodology is scarce. Thus, the present study applied Response surface methodology to statistically analyze the biodiesel production from the neutral lipids of the indigenous Coelastrella-Nannochloropsis consortium (CNC) on the way to commercial feasibility. Onset of the study, the neutral lipids and acid value of the CNC were determined to be 18.74% and 2.73%, respectively. The transesterification of the neutral lipids of CNC was optimized through the coded factors in the RSM for various reaction parameters as combined influence viz., (i) Catalyst dose: methanol volume, (ii) Catalyst dose: reaction time; (iii) Catalyst dose: reaction temperature, (iv) Time: temperature, (v) time: methanol volume, (vi) temperature: methanol volume. Based on the ANOVA, coefficient determination, 2% KOH, 2 h time, 70 °C temperature, and 9 mL methanol volume were ascertained to be optimal values to accomplish 92% biodiesel production. Further, the biodiesel has desirable palmitic, palmitoleic, stearic, oleic, linoleic, and linolenic acids, with palmitic acid as the prevalent fatty acid contributing 16-18%. In addition, the tested fuel properties of CNC biodiesel satisfy international biodiesel standards.

Nitrogen and phosphorus stress as a tool to induce lipid production in microalgae

Microalgae, capable of accumulating large amounts of lipids, are of great value for biodiesel production. The high cost of such production stimulates the search for cultivation conditions that ensure their highest productivity. Reducing the content of nitrogen and phosphorus in the culture medium is widely used to change the content and productivity of lipids in microalgae. Achieving the right balance between maximum growth and maximum lipid content and productivity is the primary goal of many experimental works to ensure cost-effective biodiesel production from microalgae. The content of nitrogen and phosphorus in nutrient media for algal cultivation after converted to nitrogen (-N) and phosphorus (-P) lies in an extensive range: from 0.007 g L- 1 to 0.417 g L- 1 and from 0.0003 g L- 1 to 0.227 g L- 1 and N:P ratio from 0.12:1 to 823.33:1. When studying nutritional stress in microalgae, no single approach is used to determine the experimental concentrations of nitrogen and phosphorus. This precludes the possibility of correct interpretation of the data and may lead to erroneous conclusions. This work results from the systematisation of information on using nitrogen and phosphorus restriction to increase the lipid productivity of microalgae of different taxonomic and ecological groups to identify future research directions. The results of 301 experiments were included in the analysis using the principal components method. The investigation considered various divisions and classes: Cyanobacteria, Rhodophyta, Dinophyta, Haptophyta, Cryptophyta, Heterokontophyta/Ochrophyta (Bacillariophyceae, Eustigmatophyceae, Xanthophyceae), Chlorophyta, and also the ratio N:P, the time of the experiment, the light intensity during cultivation. Based on the concentrations of nitrogen and phosphorus existing in various nutrient media, a general scheme for designating the supply of nutrient media for nitrogen (as NO3- or NH4+, N g L- 1) and phosphorus (as РO4-, P g L- 1) has been proposed: replete -N (˃0.4 g L- 1), moderate -N (0.4-0.2), moderate N-limitation (0.19-0.1), strong N-limitation (˂0.1), without nitrogen (0), replete -Р (˃0.2), moderate -P (0.2-0.02), moderate P-limitation (0.019-0.01), strong P-limitation (˂0.01), without phosphorus (0).

Fluorescent Imaging and Sorting of High-Lipid-Content Strains of Green Algae by Using an Aggregation-Induced Emission Luminogen

Microalgae-based biofuels are receiving attention at the environmental, economic, and social levels because they are clean, renewable, and quickly produced. The green algae Chlorella vulgaris has been extensively studied in research laboratories and the biofuel industry as a model organism to increase lipid production to be cost-effective in commercial production. In this work, we utilized a lipid-droplet-specific luminogen with aggregation-induced emission (AIE) characteristics to increase the lipid production of C. vulgaris by fluorescent imaging and sorting of those algal cells with large and rich lipid droplets for subculturing. The AIE-active TPA-A enabled real-time monitoring of the size and number of lipid droplets in C. vulgaris during their growth period so that we can identify the best time for harvesting. Furthermore, the algae cells with high lipid content were identified and collected for subculturing by the technique of fluorescence-activated cell sorting (FACS). The lipid production in the generation of two successive selections was almost doubled compared to the generation with natural selection. This work demonstrated that the technologies of AIE and FACS could be applied together to improve the production of a third-generation biofuel.

Optimized Protocol for Microalgae DNA Staining with SYTO9/SYBR Green I, Based on Flow Cytometry and RSM Methodology: Experimental Design, Impacts and Validation

Multiple fluorochromes are extensively used to investigate different microalgal aspects, such as viability and physiology. Some of them can be used to stain nucleic acids (DNA). Well-known examples are SYBR Green I and SYTO 9, the latter of which offers several advantages, especially when combined with flow cytometry (FCM)—a powerful method for studying microalgal population heterogeneity and analyzing their cell cycles. However, the effects of these dyes on the microalgae cell physiology have not been fully elucidated yet. A statistical experimental design, using response surface methodology (RSM) with FCM was applied in this study to optimize the DNA staining of a non-conventional microalgae, Chromochloris zofingiensis, with SYBR Green I and SYTO 9, and to optimize the variables affecting staining efficiency, i.e., the dye concentration, incubation time and staining temperature. We found that none of these factors affects the staining efficiency, which was not less than 99.65%. However, for both dyes, the dye concentration was shown to be the most significant factor causing cell damage (p-values: 0.0003; <0.0001) for SYBR Green I and SYTO 9, respectively. The staining temperature was only significant for SYTO 9 (p-value: 0.0082), and no significant effect was observed regarding the incubation time for both dyes. The values of the optimized parameters (0.5 µM, 05 min and 25 °C) for SYTO 9 and (0.5 X, 5 min and 25 °C) for SYBR Green I resulted in the maximum staining efficiency (99.8%; 99.6%), and the minimum damaging effects (12.86%; 13.75%) for SYTO 9 and SYBR Green I, respectively. These results offer new perspectives for improving the use of DNA staining fluorochromes and provides insights into their possible side effects on microalgae.

Strain Development in Microalgal Biotechnology-Random Mutagenesis Techniques

Microalgal biomass and metabolites can be used as a renewable source of nutrition, pharmaceuticals and energy to maintain or improve the quality of human life. Microalgae’s high volumetric productivity and low impact on the environment make them a promising raw material in terms of both ecology and economics. To optimize biotechnological processes with microalgae, improving the productivity and robustness of the cell factories is a major step towards economically viable bioprocesses. This review provides an overview of random mutagenesis techniques that are applied to microalgal cell factories, with a particular focus on physical and chemical mutagens, mutagenesis conditions and mutant characteristics.

On-Line Monitoring of Biological Parameters in Microalgal Bioprocesses Using Optical Methods

Microalgae are promising sources of fuels and other chemicals. To operate microalgal cultivations efficiently, process control based on monitoring of process variables is needed. On-line sensing has important advantages over off-line and other analytical and sensing methods in minimizing the measurement delay. Consequently, on-line, in-situ sensors are preferred. In this respect, optical sensors occupy a central position since they are versatile and readily implemented in an on-line format. In biotechnological processes, measurements are performed in three phases (gaseous, liquid and solid (biomass)), and monitored process variables can be classified as physical, chemical and biological. On-line sensing technologies that rely on standard industrial sensors employed in chemical processes are already well-established for monitoring the physical and chemical environment of an algal cultivation. In contrast, on-line sensors for the process variables of the biological phase, whether biomass, intracellular or extracellular products, or the physiological state of living cells, are at an earlier developmental stage and are the focus of this review. On-line monitoring of biological process variables is much more difficult and sometimes impossible and must rely on indirect measurement and extensive data processing. In contrast to other recent reviews, this review concentrates on current methods and technologies for monitoring of biological parameters in microalgal cultivations that are suitable for the on-line and in-situ implementation. These parameters include cell concentration, chlorophyll content, irradiance, and lipid and pigment concentration and are measured using NMR, IR spectrophotometry, dielectric scattering, and multispectral methods. An important part of the review is the computer-aided monitoring of microalgal cultivations in the form of software sensors, the use of multi-parameter measurements in mathematical process models, fuzzy logic and artificial neural networks. In the future, software sensors will play an increasing role in the real-time estimation of biological variables because of their flexibility and extendibility.

Co-Cultivation of Leptolyngbya tenuis (Cyanobacteria) and Chlorella ellipsoidea (Green alga) for Biodiesel Production, Carbon Sequestration, and Cadmium Accumulation

The co-cultivation approach using cyanobacteria-Leptolyngbya tenuis and green alga-Chlorella ellipsoidea demonstrated in the present study showed additive and synergistic effects on biomass yield, biomass productivity, lipid yield, lipid productivity, CO₂ fixation, and cadmium bioremediation efficiency. The results of co-culture in batch mode revealed about 2-3 times increase in biomass and two times increase in total lipid, when compared to the pure culture batches. The results revealed that co-cultures exhibited significantly high CO₂ fixation rate of 2.63  ±  0.09 g/L/d, which is 1.5-2 times better than monocultures (P < 0.05). To explore the bioaccumulation of cadmium by co-cultures and pure cultures, different concentrations of cadmium nitrate was used in flask trials. Cadmium accumulation was observed in the order: co-culture (74%, 0.37 mg/L) > Chlorella (58%, 0.29 mg/L) > Leptolyngbya (50%, 0.25 mg/L) (P < 0.05). In addition, fatty acid composition, CHNS analysis, biodiesel characterization, and biochemical compositions were also determined using co-culture method. The maximum biomass yield, productivity, lipid content, and CO₂ fixation rate in cadmium induced co-culture were 3.95  ±  0.13 g/L, 258.88  ±  15.75 mg/L/d, 41.43  ±  0.71%, and 3.21  ±  0.20 g/L/d, respectively which is 1.2, 1.3, 2.3, and 1.2 times higher than the control (P < 0.05). Cadmium induced changes in growth and lipid yield using co-culture suggests cost-effective and eco-friendly production of biodiesel and carbon mitigation.

Nile Red assay development for the estimation of neutral lipids in Chlorella emersonii and Pseudokirchneriella subcapitata

Fluorescent dyes offer a useful method for the measurement of intracellular lipids. They are inexpensive and require simple optical measurement instrumentation, whilst simultaneously providing high throughput application. Nile Red is a hydrophobic, metachromatic dye which has been widely used for detection of intracellular lipids. However, Nile Red fluorescence depends on its concentration, microenvironment polarity, incubation time and, therefore, requires strain specific optimization. Hence, neutral lipids in Chlorella emersonii and Pseudokirchneriella subcapitata cannot be quantified using existing Nile Red methods developed for other microalgae strains and, therefore an optimised procedure for these strains is required. In this method development, the optimal excitation and emission wavelengths were selected based on the solvent used for Nile Red dissolution. The effect of Nile Red concentration, microalgae cell concentration, incubation time on fluorescence intensity was explored and optimised. Quintuplet assay repeats were executed for increased assay robustness for two microalgae strains, Chlorella emersonii and Pseudokirchneriella subcapitata, with protocol reliability confirmed by fluorescence microscopy. In brief, 20% (v/v) DMSO containing 10μg/ml and 5μg/ml Nile red was found to be ideal concentration for neutral lipid estimation in Chlorella emersonii and Pseudokirchneriella subcapitata respectively when an incubation time of 60mins and 40mins at 40°C was used. This optimised Nile Red protocol is a robust, simple and cost-effective method for neutral lipid quantification in Chlorella emersonii and Pseudokirchneriella subcapitata.

Pilot scale wastewater treatment, CO2 sequestration and lipid production using microalga, Neochloris aquatica RDS02

In present investigation carried out large-scale treatment of tannery effluent by the cultivation of microalgae, Neochloris aquatica RDS02. The tannery effluent treatment revealed that significant reduction heavy metals were chromium-3.59, lead-2.85, nickel-1.9, cadmium-10.68, zinc-4.49, copper-0.95 and cobalt-1.86 mg/L on 15th day of treatment using N. aquatica RDS02. The microalgal biosorption capacity q _max rate was Cr-88.66, Pb-75.87, Ni-87.61, Cd-60.44, Co-52.86, Zn-84.90 and Cu-54.39, and isotherm model emphasized that the higher R ² value 0.99 by Langmuir and Freundlich kinetics model. The microalga utilized highest CO₂ (90%) analyzed by CO₂ biofixation and utilization kinetics, biomass (3.9 mg/mL), lipid (210 mg mL^-1), carbohydrate (102.75 mg mL^-1), biodiesel (4.9 mL g^-1) and bioethanol (4.1 mL g^-1). The microalgal-lipid content was analyzed through Nile red staining. Gas chromatography mass spectrometric (GCMS) analysis confirmed that the presence of a biodiesel and major fatty acid methyl ester (FAME) profiling viz., tridecanoic acid methyl ester, pentadecanoic acid methyl ester, octadecanoic acid methyl ester, myristic acid methyl ester, palmitic acid methyl ester and oleic acid methyl ester. Fourier transform infrared (FTIR) analysis confirmed that the presence of a functional groups viz., phenols, alcohols, alkynes, carboxylic acids, ketones, carbonyl and ester groups. The bioethanol production was confirmed by high-performance liquid chromatography (HPLC) analyze.

Bioremediation and biomass production of microalgae cultivation in river watercontaminated with pharmaceutical effluent

This work evaluated the potential of microalgae of Chlorella sp., SL7A, Chlorococcum sp., SL7B and Neochloris sp.,SK57 cultivated in river water contaminated with pharmaceutical effluent for biomass and lipid production. It has been observed that fast growing algae in this medium is Neochloris sp.SK57. Maximum biomass and lipid yield was obtained from Neochloris sp. SK57 (0.52 g/l) and Chlorococcum sp. SL7B (0.129 g/l)along with drycell weight of lipid was 28%.The increased in biomass and lipid in this media is could due to assimilation of organic nutrients and stress due to other components present in the river water. Fatty acid profile of algal biomass showed that saturated fatty acids production is enhanced in oils of Neochloris sp. SK57, and its suitability in food and fuel applications. Water quality of the river water was monitored before and after algal cultivation. Results showed that quality of river water was improved after algal cultivation.

Monitoring Microalgal Neutral Lipid Accumulation with Nile Red

The widely applied Nile red (NR) method allows near real-time monitoring of microalgal neutral lipid accumulation. When added to a culture sample, optimally, the fluorescent dye NR penetrates the microalgal cell wall staining the intracellular neutral lipids, and the measured fluorescence is linearly correlated to the neutral lipid concentration. Here I describe an optimization protocol for determining the optimal staining parameters for each new microalgal species, followed by a basic NR staining protocol to be applied for monitoring of microalgal neutral lipid accumulation.

Nitrogen-dependent metabolic regulation of lipid production in microalga Scenedesmus vacuolatus

Microalga Scenedesmus vacuolatus exhibited maximum growth, protein and carbohydrate contents at 10.0 mM concentration of nitrate, 1.0 mM of glutamate nitrogen and at C/N ratio (12 mM acetate+10 mM nitrate). However, these cell constituents showed the highest values in the C+N grown cells, but the lipid content was found to be the highest glutamate grown cells. FTIR analysis of Lipid/Carbohydrate and Lipid/Protein ratio and flow cytometric analysis of neutral lipids revealed higher lipid content in the glutamate grown cells than in the nitrogen starved, nitrate and C+N grown cells. The nitrate reductase activity was the highest in the C+ N grown cells and the lowest activity was found in the glutamate grown cells. A corollary of these results suggested that suppression of nitrogen assimilatory system, whether by glutamate or by nitrogen deprivation, was the most suitable physiological condition for enhanced lipid synthesis and biofuel production in microalgal cells.

Evaluation of Bacterial Lipid Production: Quantitative and Qualitative Measurements: Tips and Guidelines

Over the last decade, finding bacterial strains with ability to accumulate high concentrations of lipids has gained increasing interest, since these lipids may be used in different industries. Here we describe two methods for evaluation of lipid accumulation in cyanobacteria, following by our personal reflection on issues surrounding the use of these methods. First, we present the Bligh and Dyer protocol as a traditional extraction method using organic solvents for quantitative determination of lipids and next Nile red, a selective fluorescent stain, that has been used as a rapid approach for both qualitative and quantitative measurement of lipids.

Single cell-type analysis of cellular lipid remodelling in response to salinity in the epidermal bladder cells of the model halophyte Mesembryanthemum crystallinum

Salt stress causes dramatic changes in the organization and dynamic properties of membranes, however, little is known about the underlying mechanisms involved. Modified trichomes, known as epidermal bladder cells (EBC), on the leaves and stems of the halophyte Mesembryanthemum crystallinum can be successfully exploited as a single-cell-type system to investigate salt-induced changes to cellular lipid composition. In this study, alterations in key molecular species from different lipid classes highlighted an increase in phospholipid species, particularly those from phosphatidylcholine and phosphatidic acid (PA), where the latter is central to the synthesis of membrane lipids. Triacylglycerol (TG) species decreased during salinity, while there was little change in plastidic galactolipids. EBC transcriptomic and proteomic data mining revealed changes in genes and proteins involved in lipid metabolism and the upregulation of transcripts for PIPKIB, PI5PII, PIPKIII, and phospholipase D delta suggested the induction of signalling processes mediated by phosphoinositides and PA. TEM and flow cytometry showed the dynamic nature of lipid droplets in these cells under salt stress. Altogether, this work indicates that the metabolism of TG might play an important role in EBC response to salinity as either an energy reserve for sodium accumulation and/or driving membrane biosynthesis for EBC expansion.

Molecular characterization of freshwater microalgae and nutritional exploration to enhance their lipid yield

Biomass and lipid yield under nutrient depleted and supplemented conditions of N and Mg in two freshwater isolates, Chlorella sp. NC-MKM and Scenedesmus acutus NC-M2 from Meghalaya were investigated for biodiesel production. Both the strains, Chlorella sp. NC-MKM and Scenedesmus acutus NC-M2 are oleaginous in nature having lipid content of 40.2 ± 1.4 and 37.3 ± 2.6% DCW, respectively. The significant increase (92.8%) in lipid content was found in N-depleted condition while an increase (46.65%) in biomass yield was observed under Mg-supplemented condition in Chlorella sp. NC-MKM. Studying the interactive effects of nutrient depletion and supplementation, combination of N-depleted and Mg-supplemented condition was selected for further investigation to check enhanced lipid yield in Chlorella sp. NC-MKM. The results showed a significant increase in biomass yield, lipid yield and lipid content (30, 66.8, and 28.66%, respectively). Under this condition, accumulation of neutral lipid was also enhanced (47.17% M2 gated cells) compared to control (21.37% M2 gated cells). Further, FAMEs revealed that the relative percentage of saturated and mono-unsaturated fatty acids increased (66.16%) in Chlorella sp. NC-MKM compared to control that improves biodiesel properties.

Morphological and ultrastructural characterization of the acidophilic and lipid-producer strain Chlamydomonas acidophila LAFIC-004 (Chlorophyta) under different culture conditions

Chlamydomonas acidophila LAFIC-004 is an acidophilic strain of green microalgae isolated from coal mining drainage. In the present work, this strain was cultivated in acidic medium (pH 3.6) under phototrophic, mixotrophic, and heterotrophic regimes to determine the best condition for growth and lipid production, simultaneously assessing possible morphological and ultrastructural alterations in the cells. For heterotrophic and mixotrophic treatments, two organic carbon sources were tested: 1 % glucose and 1 % sodium acetate. Lipid content and fatty acid profiles were only determined in phototrophic condition. The higher growth rates were achieved in phototrophic conditions, varying from 0.18 to 0.82 day^-1. Glucose did not result in significant growth increase in either mixotrophic or heterotrophic conditions, and acetate proved to be toxic to the strain in both conditions. Oil content under phototrophic condition was 15.9 % at exponential growth phase and increased to 54.63 % at stationary phase. Based on cell morphology (flow cytometry and light microscopy) and ultrastructure (transmission electron microscopy), similar characteristics were observed between phototrophic and mixotrophic conditions with glucose evidencing many lipid bodies, starch granules, and intense fluorescence. Under the tested conditions, mixotrophic and heterotrophic modes did not result in increased neutral lipid fluorescence. It can be concluded that the strain is a promising lipid producer when grown until stationary phase in acidic medium and under a phototrophic regime, presenting a fatty acid profile suitable for biodiesel production. The ability to grow this strain in acidic mining residues suggests a potential for bioremediation with production of useful biomass.

Rapid Accumulation of Total Lipid in Rhizoclonium africanum Kutzing as Biodiesel Feedstock under Nutrient Limitations and the Associated Changes at Cellular Level

Increase of total lipid and the proportion of the favorable fatty acids in marine green filamentous macroalga Rhizoclonium africanum (Chlorophyceae) was studied under nitrate and phosphate limitations. These stresses were given by both eliminating and doubling the required amounts of nitrate and phosphate salts in the growth media. A significant twofold increase in total lipid (193.03 mg/g) was achieved in cells in absence of nitrate in the culture medium, followed by phosphate limitation (142.65 mg/g). The intracellular accumulation of neutral lipids was observed by fluorescence microscopy. The scanning electron microscopic study showed the major structural changes under nutrient starvation. Fourier transform infrared spectroscopy (FTIR) revealed the presence of ester (C-O-C stretching), ketone (C-C stretching), carboxylic acid (O-H bending), phosphine (P-H stretching), aromatic (C-H stretching and bending), and alcohol (O-H stretching and bending) groups in the treated cells indicating the high accumulation of lipid hydrocarbons in the treated cells. Elevated levels of fatty acids favorable for biodiesel production, that is, C16:0, C16:1, C18:1, and C20:1, were identified under nitrate- and phosphate-deficient conditions. This study shows that the manipulation of cultural conditions could affect the biosynthetic pathways leading to increased lipid production while increasing the proportion of fatty acids suitable for biodiesel production.

Efficacy of EDTA and Phosphorous on Biomass Yield and Total Lipid Accumulation in Two Green Microalgae with Special Emphasis on Neutral Lipid Detection by Flow Cytometry

Chlorella ellipsoidea and Chlorococcum infusionum, promising microalgae for biodiesel feedstock production, were treated with ethylenediaminetetraacetate (EDTA) and phosphorous to induce stress which was then followed by flow cytometry to study the enhanced intracellular neutral lipid content. Treatment resulted in up to a threefold increase in total lipid content of Chlorella (41.8±1.9% at 16 days of incubation period) and more than twofold increases in Chlorococcum (31.3±1.0% at 18 days of incubation period) under phosphorous starvation in the culture. It was observed that maximum biomass yields in Chlorella and Chlorococcum were 1.56±0.06 and 2.17±0.12 g/L at 1.5 g/L of phosphorous after 20 and 18 days of incubation periods, respectively. The qualitative analyses of neutral lipid bodies under stress conditions were performed by confocal microscopy and revealed bright golden-yellow lipid droplets in stress exposed cells. Significant increase of monounsaturated fatty acids under the nutrient limited conditions was suitable to produce biodiesel. The maximum biomass (g/L) and lipid content (% dry cell weight) at different stresses showed significant results (p<0.05) by single-factor Analysis of Variance (ANOVA) followed by Duncan’s Multiple Range Test (DMRT).

An integrated salinity-driven workflow for rapid lipid enhancement in green microalgae for biodiesel application

A laboratory based integrated approach was undertaken for improvement of lipid accumulation in green microalgae under sodium chloride (NaCl) stress.