Charge Exchange Reaction in Dopant-Assisted Atmospheric Pressure Chemical Ionization and Atmospheric Pressure Photoionization

Dielectric Barrier Discharge Ionization Mechanisms: Polycyclic Aromatic Hydrocarbons as a Case of Study

Dielectric barrier discharge ionization (DBDI) is a versatile tool for small-molecule mass spectrometry applications, helping cover from polar to low polar molecules. However, the plasma gas-phase interactions are highly complex and have been scarcely investigated. The ionization mechanisms of plasmas have long been assumed to be somewhat similar to atmospheric pressure chemical ionization (APCI). Here, we evaluated the ionization mechanisms of a two-ring DBDI ion source, using different discharge gases to analyze vaporized liquid samples. Polycyclic aromatic hydrocarbons (PAHs) were used as model analytes to assess the mechanisms' dominance: protonation, [M + H]⁺, or radical ion species formation, [M]^·+. In the present work, two different ionization trends were observed for APCI and DBDI during the PAH analysis; the compounds with proton affinities (PA) over 856 kJ/mol were detected as [M + H]⁺ when APCI was used as ionization source. Meanwhile, independently of the PA, DBDI showed the prevalence of charge exchange reactions. The addition of dopants in the gas-phase region shifted the ionization mechanisms toward charge exchange reactions, facilitating the formation of [M]^·+ ion species, showing anisole a significant boost of the PAH radical ion species signals, over nine times for Ar-Prop-DBDI analysis. The presence of high-energy metastable atoms (e.g., He^M) with high ionization potentials (IE = 19.80 eV) did not show boosted PAH abundances or extensive molecule fragmentation. Moreover, other species in the plasma jet region with closer and more appropriate IE, such as N₂ B³Π_g excited molecules, are likely responsible for PAH Penning ionization.

Negative Atmospheric Pressure Chemical Ionization of Chlorinated Hydrocarbons Studied by Ion Mobility Spectrometry (IMS) and IMS-MS Techniques

Negative polarity atmospheric pressure chemical ionization of selected chlorinated hydrocarbons (tetrachloromethane CCl₄ and hexachloroethane C₂Cl₆, dichloromethane CH₂Cl₂, trichloromethane CHCl₃, 1,1,1,2-tetrachloroethane 1,1,1,2-C₂H₂Cl₄, 1,1,2,2-tetrachloroethane 1,1,2,2,-C₂H₂Cl₄ 1,1,2-trichloroethane 1,1,2-C₂H₃Cl₃, and 1,1,2-trichloroethane 1,1,2-C₂HCl₃) was studied using ion mobility spectrometry (IMS) and IMS combined with time-of-flight mass spectrometer (IMS-TOF MS) techniques, in the dry air and at two different drift gas temperatures (323 and 373 K). The ionization was performed using the O₂^-CO₂(H₂O)_0,1 reactant ions (RIs), and the dominant ionization reaction was the dissociative electron transfer. The ionization resulted in the appearance of Cl^- ions for all substances and [O₂H..Cl]^- ions, which were absent in the case of perchlorinated substances. The quantum-chemical calculations at the density functional theory level of theory using the ωB97X-D/aug-cc-pVTZ method were performed to calculate the thermochemical data (heats of formations, electron affinities, reaction enthalpies) for RIs, neutral substances, neutral fragments, and the anionic fragments. The calculations supported the experimental observations regarding the endothermicity of the Cl^- channel for all substances and the exothermicity of the [O₂H..Cl]^- channel for the tetrachloro- and trichloroethanes.

Significance of Competitive Reactions in an Atmospheric Pressure Chemical Ionization Ion Source: Effect of Solvent

Ionization of organic compounds with different structural and energetic properties including benzene derivatives, polycyclic aromatic hydrocarbons (PAHs), ketones, and polyenes was studied using a commercial atmospheric pressure corona discharge (APCI) ion source on a drift tube ion mobility-quadrupole-time-of-flight mass spectrometer (IM-QTOFMS). It was found that the studied cohort of compounds can be experimentally ionized via protonation, charge transfer, and hydride abstraction leading to formation of [M + H]⁺, [M]^+•, and [M - H]⁺ species, respectively. By experimentally monitoring the product ions and comparing the thermodynamic data for different ionization paths, it was proposed that NO⁺ is one of the main reactant ions (RIs) in the ion source used. Of particular focus in this work were theoretical and experimental studies of the effect of solvents frequently used for analytical applications with this ion source (acetonitrile, methanol, and chloroform) on the ionization mechanisms. In methanol, the studied compounds were observed to be ionized mainly via proton transfer while acetonitrile suppressed the protonation of compounds and enhanced their ionization via charge transfer and hydride abstraction. Use of chloroform as a solvent led to formation of CHCl₂⁺ as an alternative reactant ion (RI) to ionize the analytes via electrophilic substitution. Density functional theory (DFT) was used to study the different paths of ionization. The theoretical and experimental results showed that by using only the absolute thermodynamic data, the real ionization path cannot be determined and the energies of all competing processes such as charge transfer, protonation, and hydride abstraction need to be compared.

VUV photoprocessing of oxygen-containing polycyclic aromatic hydrocarbons: iPEPICO study of the unimolecular dissociation of ionized benzofuran

Oxygen-containing polycyclic aromatic hydrocarbons (OPAHs) are potential contributors to the 11.3 m band in interstellar observations. To further explore their role in the interstellar medium, we have investigated their fate after photoprocessing by VUV radiation; in particular, we studied the dissociative photoionization of the simplest OPAH, benzofuran, with imaging photoelectron photoion coincidence spectroscopy, iPEPICO. Ionized benzofuran dissociates by loss of CO, followed by a sequential H atom loss. The parallel HCO-loss channel, leading to the same bicyclic C7H5+ fragment ion, is not competitive at low excess energies above the ionization threshold. However, the collision-induced dissociation tandem mass spectrometry results suggest that CO and HCO may be formed in parallel at higher energies. An RRKM fragmentation model reproduced the iPEPICO data well assuming the initial 1,2-H shift transition state to be rate determining to CO loss. The breakdown diagram and the measured dissociation rates agreed well at the CBS-QB3-calculated activation energy of 2.99 eV, which could be relaxed to 3.25 eV, and only a slight adjustment of the ab initio activation entropy. The model barrier to sequential H-loss is larger than the computed H-loss threshold and the breakdown diagram rises less steeply than predicted, which indicates suprastatistical kinetic energy release after the tight H-transfer transition state of the first step. HCO cleavage is possible after a ring-opening transition state, which is looser than and isoenergetic with the CO-loss transition state. However, a subsequent ring formation transition state at 3.85 eV is moderately tight, which suppresses HCO loss at low excess energies.

Ultra-high-performance liquid chromatography-atmospheric pressure ionization-tandem mass spectrometry method for the migration studies of primary aromatic amines from food contact materials

This work describes the development of an ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for the determination of 23 primary aromatic amines (PAAs) that can potentially migrate from food contact materials. The chromatographic separation was performed in a pentafluorophenylpropyl (PFPP) column achieving the separation of all PAAs in less than 6.5 min using water to acetonitrile (0.1% acetic acid in both solvents) as mobile phase and a gradient elution. The feasibility of atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) was evaluated as alternative to electrospray ionization (ESI) for the analysis of PAAs. Results showed that for most of the compounds, better responses were obtained with APCI, which shows the advantage of being less susceptible to matrix effects. Tandem mass spectrometry (MS/MS) fragmentation studies of [M + H]⁺ allowed for the selection of the two most characteristic and abundant product ions of the 23 PAAs which led to the development of a selective and sensitive UHPLC-APCI-MS/MS method with limits of detection ranging from 0.2 to 2 μg kg⁻¹. Moreover, intra-day and inter-day precisions of the method in terms of relative standard deviation (RSD%) were lower than 10% and 15%, while trueness as relative error was <15% for most of the compounds. The UHPLC-APCI-MS/MS method was applied to the analysis of twenty black Nylon kitchenware samples that were submitted to migration tests using food simulant B (3% acetic acid, w/v), and the presence of PAAs were detected in eighteen samples at concentrations above the legislated limit (2 μg kg⁻¹ of food or food simulants).

In-Line Dopant Generation for Atmospheric Pressure Ionization Mass Spectrometry

A concentric trace gas permeation tube that diffuses chemical reagents to a central carrier gas stream is used to drive chemical reaction pathways and influence gas-phase chemistry for a variety of atmospheric pressure ionization sources for mass spectrometry. Tunable permeation through the reservoir-jacketed polymer membrane is triggered by the heated gas moving through the tube, evaporating the dopant into a sheath dry gas or into a sample stream in room air without diluting the analyte concentration. The permeator is used to add dopants to an electrospray plume for analyte ion charge reduction and to perform hydrogen-deuterium exchange on biomolecules in different spray conditions. Dopants are also added to atmospheric pressure chemical ionization to favor the ionization of select components of diesel fuel. Atmospheric pressure photoionization is performed with the permeation tube in line with tubing transporting sample headspace to an enclosed discharge lamp. Toluene dopant from the permeator increases the proton transfer and charge exchange signal from clove oil and mothballs many times without exposing the laboratory to reagent fumes. Water permeation is also used to humidify the sample gas stream.

Rapid screening and quantitation of PAHs in water and complex sample matrices by solid-phase microextraction coupled to capillary atmospheric pressure photoionization-mass spectrometry

A capillary atmospheric pressure photoionization (cAPPI) source was used to analyze polycyclic aromatic hydrocarbons (PAHs) in complex matrices like grilled meat extract and urban dust reference material, as well as screening for PAHs in aqueous samples such as tap and lake water. A high-throughput workflow was developed that allowed rapid screening of unknown samples by direct solid-phase microextraction (SPME) coupled with cAPPI-MS, with confirmatory gas chromatography performed only for samples containing trace amounts of PAHs. Extraction times were as low as 15 s, with a total analysis time of 2 min per sample for screening. Limits of detections were in the low pg/ml range and in the subpg/ml range for the direct and chromatographic approach, respectively, with a linear dynamic range between two and three orders of magnitude, as determined for 15 model PAHs. This rapid approach represents an attractive way to screen samples containing nonpolar compounds using an ambient ionization source.

The influence of different types of reactant ions on the ionization behavior of polycyclic aromatic hydrocarbons in corona discharge ion mobility spectrometry

RATIONALE

Some polycyclic aromatic hydrocarbons (PAHs) are considered to be cancer-causing chemicals, and ion mobility spectrometry (IMS) is used for on-site detection of such hazardous chemicals. In IMS, the ionization behavior of analytes is affected by the types of reactant ions (RIs). In the present work, the influence of different types of RIs on the ionization behaviors of PAHs in an ion mobility spectrometer equipped with a corona discharge ionization source was investigated using various RIs.

METHODS

Selected PAHs were dissolved in anisole, fluorobenzene, chlorobenzene, or bromobenzene. The IMS analysis procedure was performed as follows: (a) the PAH solution was dropped onto the smear matrix; (b) the smear matrix was immediately inserted into the sample inlet to minimize evaporation of the solvent; and (c) the IMS analysis was performed. The lowest amount studied was 10 ng. Variations in the IMS spectra with time were investigated.

RESULTS

PAHs were not ionized by RIs of protonated molecules ([M + H]⁺ ) such as air/moisture and acetone, but they were ionized by charge transfer reactions with RIs of molecular ions (M^•+ ) of solvents such as anisole, fluorobenzene, chlorobenzene, and bromobenzene. The PAH ions were detected following a time delay of ~1-5 s after the sample introduction, and the times at which the maximum intensities for the PAHs were observed were different. The detection limits of PAHs in chlorobenzene were on the whole better than those in other solvents, whereas those in fluorobenzene were worse. The detection limits of pyrene and benzo[a]anthracene were better than those of the other PAHs irrespective of the solvent used.

CONCLUSIONS

PAH molecules were ionized by charge transfer reactions with RIs of the solvents, and their ions were detected ~1-5 s after sample introduction. The order of the ionization efficiency was chlorobenzene > anisole > bromobenzene > fluorobenzene.

Atmospheric pressure chemical ionization mass spectrometry at low flow rates: Importance of ion source housing

RATIONALE

Hyphenation of atmospheric pressure chemical ionization (APCI) mass spectrometry with capillary and micro high-performance liquid chromatography (HPLC) is attractive for many applications, but reliable ion sources dedicated to these conditions are still missing. There are a number of aspects to consider when designing such an ion source, including the susceptibility of the ionization processes to ambient conditions. Here we discuss the importance of ion source housing for APCI at low flow rates.

METHODS

Selected compounds dissolved in various solvents were used to study ionization reactions at 10 μL/min flow rate. APCI spectra were generated using the Ion Max-S source (Thermo Fisher Scientific) operated with or without the ion source housing.

RESULTS

The APCI spectra of most compounds measured in the open and enclosed ion sources were markedly different. The differences were explained by water and oxygen molecules that entered the plasma region of the open ion source. Water tended to suppress charge transfer processes while oxygen diminished electron capture reactions and prevented the formation of acetonitrile-related radical cations useful for localizing double bonds in lipids. The effects associated with the ion source housing were significantly less important for compounds that are easy to protonate or deprotonate.

CONCLUSIONS

The use of ion source housing prevented alternative ionization channels leading to unwanted or unexpected ions. Compared with the conventional flow rate mode (1 mL/min), the effects of ambient air components were significantly higher at 10 μL/min, emphasizing the need for ion source housing in APCI sources dedicated to low flow rates.

Direct Inlet Probe Atmospheric Pressure Photo and Chemical Ionization Coupled to Ultrahigh Resolution Mass Spectrometry for the Description of Lignocellulosic Biomass

Lignocellulosic biomass, in particular wood, is a complex mixture containing cellulose, hemicellulose, lignin, and other trace compounds. Chemical analysis of these biomasses, especially lignin components, is a challenge. Lignin is a highly reticulated polymer that is poorly soluble and usually requires chemical, enzymatic, or thermal degradation for its analysis. Here, we studied the thermal degradation of lignocellulosic biomass using a direct insertion probe (DIP). The DIP was used with two ionization sources: atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) coupled to ultrahigh-resolution mass spectrometry. Beech lignocellulosic biomass samples were used to develop the DIP-APCI/APPI methodology. Two other wood species (maple and oak) were analyzed after optimization of DIP parameters. The two ionization sources were compared at first and showed different responses toward beech samples, according to the source specificity. APPI was more specific to lignin degradation compounds, whereas APCI covered a larger variety of oxygenated compounds, e.g., fatty acids and polyphenolics compounds, in addition to lignin degradation products. The study of the thermodesorption profile gave information on the different steps of lignocellulosic biomass pyrolysis. The comparison of the three feed sample types (oak, maple, and beech), using principal component analysis (PCA) with DIP-APCI experiments, showed molecular level differences between beech wood pellets and the two other wood species (maple and oak).

Ion Dissociation Dynamics of 1,2,3,4-Tetrahydronaphthalene: Tetralin as a Test Case For Hydrogenated Polycyclic Aromatic Hydrocarbons

The unimolecular dissociation of ionized tetralin was probed by tandem mass spectrometry, imaging photoelectron photoion coincidence (iPEPICO) spectroscopy, and theory. The major reactions observed were the loss of the hydrocarbons CH₃^•, C₂H₄, and C₃H₅^• together with H^•-atom loss. RRKM modeling of the iPEPICO data suggested a two-well potential energy surface. Ionized tetralin can lose all four neutrals via H-shift and ring-opening reactions or CH₃^• and C₂H₄ after interconversion to the 1-methylindane ion, a process similar to that found for ionized 1,2-dihydronaphthalene (isomerizing to form the 1-methylindene ion structure). This was confirmed at the B3LYP/6-31+G(d,p) level of theory, and potential mechanisms for all reactions are described. The ionization energy of tetralin was established from the threshold photoelectron spectrum to be 8.46 ± 0.01 eV.

Direct Mass Spectrometry Analysis of Complex Mixtures by Nanoelectrospray with Simultaneous Atmospheric Pressure Chemical Ionization and Electrophoretic Separation Capabilities

Accurate and rapid analysis of complex microsamples are challenging tasks in translational research. Nanoelectrospray ionization (nESI) is the method of choice for analyzing small sample volumes by mass spectrometry (MS), but this technique works well only for polar analytes. Herein, we describe a versatile dual noncontact nESI/nAPCI (nanoatmospheric pressure chemical ionization) source that allows simultaneous detection of both polar and nonpolar analytes in microliter quantities of samples under ambient conditions and without pretreatment. The same device can be activated to enable electrophoretic separation. The noncontact nESI/nAPCI MS platform was applied to analyze different samples, including high sensitive direct analysis of biofluids and the efficient detection of proteins in buffers with high concentration of nonvolatile salts. Excellent linearity, accuracy and limits of detection were achieved for compounds with different chemical properties in different matrices. The high sensitivity, universality, simplicity, and ease of operation make this MS technique promising for use in clinical and forensic applications.

What Will Photo-Processing of Large, Ionized Amino-Substituted Polycyclic Aromatic Hydrocarbons Produce in the Interstellar Medium?

Collision-energy resolved tandem mass spectrometry was used to probe the trends in unimolecular fragmentation in a series of ionized amino-substituted polycyclic aromatic hydrocarbons ranging from naphthalene to pyrene. As the ring system expands, the dominant dissociation process changes from HNC loss (aniline) to H loss for 1-aminopyrene. Imaging photoelectron photoion coincidence spectroscopy of 1-aminopyrene yielded threshold photon-energy resolved breakdown curves, the Rice-Ramsperger-Kassel-Marcus modeling of which gave a 0 K activation energy, E₀, for H loss of 3.8 ± 0.4 eV. Calculations at the CCSD/6-31G(d)//B3LYP/6-31G(d) level of theory were used to explore the possible reaction mechanisms for H, HNC, and C,N,H₂ losses, and details of the reaction pathways are presented. The H atom loss was found to be due both to direct N-H bond cleavage and isomerization to form an azepine derivative.

Influence of smear matrix types on detection behaviors and efficiencies of polycyclic aromatic hydrocarbons using ion mobility spectrometry

Influence of smear matrix types on detection behaviors and efficiencies of polycyclic aromatic hydrocarbons (PAHs) with different molecular weights in ion mobility spectrometry (IMS) were investigated. Various smear matrices of stainless steel mesh (SM), cellulose paper (CP), and cotton fabric (CF) were employed. Anisole was used as the solvent and IMS analysis was performed without evaporation step of the solvent to apply charge transfer reactions between PAH molecules and the molecular ions of solvent. Shapes of reactant ion peaks (RIPs) were varied according to the smear matrix types. At the beginning of the sample inlet, intensity of RIPs of air and moisture notably decreased due to the lots of solvent vapor. The SM with good gas permeability showed relatively strong RIPs of air and moisture, whereas the CP with no gas permeability showed weak ones. Detection times and efficiencies of PAH ions were varied according to the smear matrix types as well as the kinds of PAHs. PAHs were on the whole detected well in 1-3 s after the sample inlet. Detection limits of PAHs measured using the SM were slightly better than those measured using the CP, while those measured using the CP were much better than those measured using the CF. The experimental results could be explained by structures of the smear matrices and evaporation behaviors of the PAH solutions.

Response in Ambient Low Temperature Plasma Ionization Compared to Electrospray and Atmospheric Pressure Chemical Ionization for Mass Spectrometry

Modern technical evolution made mass spectrometry (MS) an absolute must for analytical chemistry in terms of application range, detection limits and speed. When it comes to mass spectrometric detection, one of the critical steps is to ionize the analyte and bring it into the gas phase. Several ionization techniques were developed for this purpose among which electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) are two of the most frequently applied atmospheric pressure methods to ionize target compounds from liquid matrices or solutions. Moreover, recent efforts in the emerging field of "ambient" MS enable the applicability of newly developed atmospheric pressure techniques to solid matrices, greatly simplifying the analysis of samples with MS and anticipating, to ease the required or even leave out any sample preparation and enable analysis at ambient conditions, outside the instrument itself. These developments greatly extend the range of applications of modern mass spectrometry (MS). Ambient methods comprise many techniques; a particular prominent group is, however, the plasma-based methods. Although ambient MS is a rather new field of research, the interest in further developing the corresponding techniques and enhancing their performance is very strong due to their simplicity and often low cost of manufacturing. A precondition for improving the performance of such ion sources is a profound understanding how ionization works and which parameters determine signal response. Therefore, we review relevant compound characteristics for ionization with the two traditional methods ESI and APCI and compare those with one of the most frequently employed representatives of the plasma-based methods, i.e., low temperature plasma ionization. We present a detailed analysis in which compound characteristics are most beneficial for the response of aromatic nitrogen-containing compounds with these three methods and provide evidence that desorption characteristics appear to have the main common, general impact on signal response. In conclusion, our report provides a very useful resource to the optimization of instrumental conditions with respect to most important requirements of the three ionization techniques and, at the same time, for future developments in the field of ambient ionization.

Utilizing ion mobility spectrometry and mass spectrometry for the analysis of polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polybrominated diphenyl ethers and their metabolites

Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) are persistent environmental pollutants originating from incomplete combustion of organic materials and synthetic sources. PAHs, PCBs, and PBDEs have all been shown to have a significant effect on human health with correlations to cancer and other diseases. Therefore, measuring the presence of these xenobiotics in the environment and human body is imperative for assessing their health risks. To date, their analyses require both gas chromatography and liquid chromatography separations in conjunction with mass spectrometry measurements for detection of both the parent molecules and their hydroxylated metabolites, making their studies extremely time consuming. In this work, we characterized PAHs, PCBs, PBDEs and their hydroxylated metabolites using ion mobility spectrometry coupled with mass spectrometry (IMS-MS) and in combination with different ionization methods including electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI). The collision cross section and m/z trend lines derived from the IMS-MS analyses displayed distinct trends for each molecule type. Additionally, the rapid isomeric and molecular separations possible with IMS-MS showed great promise for quickly distinguishing the parent and metabolized PAH, PCB, and PDBE molecules in complex environmental and biological samples.