The Effects of Trivalent Lanthanide Cationization on the Electron Transfer Dissociation of Acidic Fibrinopeptide B and its Analogs

Ratiometric fluorescent and electrochemiluminescent dual modal assay for detection of 2,6-pyridinedicarboxylic acid as an anthrax biomarker

2,6-pyridinedicarboxylic acid (DPA) is an excellent biomarker of Bacillus anthracis (B. anthracis). The sensitive detection of DPA, especially through visual point-of-care testing, was significant for accurate and rapid diagnosis of anthrax to timely prevent anthrax disease or biological terrorist attack. Herein, a ratiometric fluorescent (R-FL) and electrochemiluminescent (ECL) dual-mode detection platform with a lanthanide ion-based metal-organic framework (Ln-MOF, i.e., M/Y-X: M = Eu, Y = Tb, and X = 4,4',4″-s-triazine-1,3,5-triyltri-m-aminobenzoic acid) was developed. Eu/Tb-TATAB nanoparticles were constructed to identify DPA. The R-FL detection platform quantitatively detected DPA by monitoring the I545/I617 ratio of the characteristic fluorescence peak intensities of Tb3+ ions and Eu3+ ions. The ECL sensing platform successfully quantified DPA by exploiting the burst effect of DPA on the ECL signal. The above methods had highly sensitive and rapid detection of DPA in water and serum samples. The results showed that this dual-mode detection platform may be projected to be a powerful instrument for preventing related biological warfare and bio-terrorism.

Electron transfer dissociation mass spectrometry of acidic phosphorylated peptides cationized with trivalent praseodymium

The lanthanide ion praseodymium, Pr(III), was employed to study metallated ion formation and electron transfer dissociation (ETD) of 27 biological and model highly acidic phosphopeptides. All phosphopeptides investigated form metallated ions by electrospray ionization (ESI) that can be studied by ETD to yield abundant sequence information. The ions formed are [M + Pr - H]²⁺ , [M + Pr]³⁺ , and [M + Pr + H]⁴⁺ . All biological phosphopeptides with a chain length of seven or more residues generate [M + Pr]³⁺ . For biological phosphopeptides, [M + Pr]³⁺ undergoes more backbone cleavage by ETD than [M + Pr - H]²⁺ and, in some cases, full sequence coverage occurs. Acidic model phosphorylated hexa-peptides and octa-peptides, composed of alanine residues and one phosphorylated residue, form exclusively [M + Pr - H]²⁺ by ESI. Limited sequence information is obtained by ETD of [M + Pr - H]²⁺ with only metallated product ions being generated. For two biological phosphopeptides, [M + Pr + H]⁴⁺ is observed and may be due to the presence of at least one residue with a highly basic side chain that facilitates the addition of an extra proton. For the model phosphopeptides, more sequence coverage occurs when the phosphorylated residue is in the middle of the sequence than at either the N- or C-terminus. ETD of the metallated precursor ions formed by ESI generates exclusively metallated and nonmetallated c- and z-ions for the biological phosphopeptides, while metallated c-ions, z-ions, and a few y-ions form for the model phosphopeptides. Most of the product ions contain the phosphorylated residue indicating that the metal ion binds predominantly at the deprotonated phosphate group. The results of this study indicate that ETD is a promising tool for sequencing highly acidic phosphorylated peptides by metal adduction with Pr (III) and, by extension, all nonradioactive lanthanide metal ions.

Influence of the metals and ligands in dinuclear complexes on phosphopeptide sequencing by electron-transfer dissociation tandem mass spectrometry

Phosphorylation is one of the most important protein modifications, and electron-transfer dissociation tandem mass spectrometry (ETD-MS/MS) is a potentially useful method for the sequencing of phosphopeptides, including determination of the phosphorylation site. Notably, ETD-MS/MS typically provides useful information when the precursor contains more than three positive charges. It is not yet used as an analysis method for large-scale phosphopeptide production due to difficulties occurring in the production of acidic phosphopeptides having more than three positive charges. To increase the charge state of phosphopeptides, we used dinuclear metal complexes, which selectively bind to the phosphate group in phosphopeptides with the addition of positive charge(s). Dinuclear copper, zinc, and gallium complexes were tested and it was found that the type of metal present in the complex strongly affected the affinity of the phosphorylated compounds and their ETD fragmentation. The dinuclear copper complex interacted weakly with the phosphate groups and ETD-induced peptide fragmentation was largely suppressed by the presence of Cu²⁺, which worked as an electron trap. The dinuclear gallium complex was strongly bound to a phosphate group. However, the ligand binding to gallium acted as an electron trap and the presence of dinuclear gallium complex in the precursor for ETD-MS/MS hampered the sequencing of the phosphopeptides, as in the case of dinuclear copper complexes. In contrast, dinuclear zinc complexes efficiently bind to phosphopeptides with an increase in the charge state, facilitating phosphopeptide sequencing by ETD-MS/MS. The fragmentation of the ligand and peptide backbone in the dinuclear zinc-phosphopeptide complex were competitively induced by ETD. These processes are influenced by the ligand structure and so the detailed ETD fragmentation pathways were investigated using density functional theory calculations.

Electron Transfer Dissociation and Collision-Induced Dissociation of Underivatized Metallated Oligosaccharides

Electron transfer dissociation (ETD) and collision-induced dissociation (CID) were used to investigate underivatized, metal-cationized oligosaccharides formed via electrospray ionization (ESI). Reducing and non-reducing sugars were studied including the tetrasaccharides maltotetraose, 3α,4β,3α-galactotetraose, stachyose, nystose, and a heptasaccharide, maltoheptaose. Univalent alkali, divalent alkaline earth, divalent and trivalent transition metal ions, and a boron group trivalent metal ion were adducted to the non-permethylated oligosaccharides. ESI generated [M + Met]⁺, [M + 2Met]²⁺, [M + Met]²⁺, [M + Met - H]⁺, and [M + Met - 2H]⁺ most intensely along with low intensity nitrate adducts, depending on the metal and sugar ionized. The ability of these metal ions to produce oligosaccharide adduct ions by ESI had the general trend: Ca(II) > Mg(II) > Ni(II) > Co(II) > Zn(II) > Cu(II) > Na(I) > K(I) > Al(III) ≈ Fe(III) ≈ Cr(III). Although trivalent metals were utilized, no triply charged ions were formed. Metal cations allowed for high ESI signal intensity without permethylation. ETD and CID on [M + Met]²⁺ produced various glycosidic and cross-ring cleavages, with ETD producing more cross-ring and internal ions, which are useful for structural analysis. Product ion intensities varied based on glycosidic-bond linkage and identity of monosaccharide sub-unit, and metal adducts. ETD and CID showed high fragmentation efficiency, often with complete precursor dissociation, depending on the identity of the adducted metal ion. Loss of water was occasionally observed, but elimination of small neutral molecules was not prevalent. For both ETD and CID, [M + Co]²⁺ produced the most uniform structurally informative dissociation with all oligosaccharides studied. The ETD and CID spectra were complementary. Graphical Abstract ᅟ.

Effects of acidic peptide size and sequence on trivalent praseodymium adduction and electron transfer dissociation mass spectrometry

Using the lanthanide ion praseodymium, Pr(III), metallated ion formation and electron transfer dissociation (ETD) were studied for 25 biological and model acidic peptides. For chain lengths of seven or more residues, even highly acidic peptides that can be difficult to protonate by electrospray ionization will metallate and undergo abundant ETD fragmentation. Peptides composed of predominantly acidic residues form only the deprotonated ion, [M + Pr - H]2+ ; this ion yields near complete ETD sequence coverage for larger peptides. Peptides with a mixture of acidic and neutral residues generate [M + Pr]3+ , which cleaves between every residue for many peptides. Acidic peptides that contain at least one residue with a basic side chain also produce the protonated ion, [M + Pr + H]4+ ; this ion undergoes the most extensive sequence coverage by ETD. Primarily metallated and non-metallated c- and z-ions form for all peptides investigated. Metal adducted product ions are only present when at least half of the peptide sequence can be incorporated into the ion; this suggests that the metal ion simultaneously attaches to more than one acidic site. The only site consistently lacking dissociation is at the N-terminal side of a proline residue. Increasing peptide chain length generates more backbone cleavage for metal-peptide complexes with the same charge state. For acidic peptides with the same length, increasing the precursor ion charge state from 2+ to 3+ also leads to more cleavage. The results of this study indicate that highly acidic peptides can be sequenced by ETD of complexes formed with Pr(III). Copyright © 2017 John Wiley & Sons, Ltd.