Optimization and Kinetic Model Development for Photocatalytic Dye Degradation

Auramine O UV Photocatalytic Degradation on TiO2 Nanoparticles in a Heterogeneous Aqueous Solution

Amongst the environmental issues throughout the world, organic synthetic dyes continue to be one of the most important subjects in wastewater remediation. In this paper, the photocatalytic degradation of the dimethylmethane fluorescent dye, Auramine O (AO), was investigated in a heterogeneous aqueous solution with 100 nm anatase TiO2 nanoparticles (NPs) under 365 nm light irradiation. The effect of irradiation time was systematically studied, and photolysis and adsorption of AO on TiO2 NPs were also evaluated using the same experimental conditions. The kinetics of AO photocatalytic degradation were pseudo-first order, according to the Langmuir–Hinshelwood model, with a rate constant of 0.048 ± 0.002 min−1. A maximum photocatalytic efficiency, as high as 96.2 ± 0.9%, was achieved from a colloidal mixture of 20 mL (17.78 μmol L−3) AO solution in the presence of 5 mg of TiO2 NPs. The efficiency of AO photocatalysis decreased nonlinearly with the initial concentration and catalyst dosage. Based on the effect of temperature, the activation energy of AO photocatalytic degradation was estimated to be 4.63 kJ mol−1. The effect of pH, additional scavengers, and H2O2 on the photocatalytic degradation of AO was assessed. No photocatalytic degradation products of AO were observed using UV–visible and Fourier transform infrared spectroscopy, confirming that the final products are volatile small molecules.

Synthesis of high-performance conjugated microporous polymer/TiO2 photocatalytic antibacterial nanocomposites

High-performance conjugated microporous polymer (CMP)/TiO₂ photocatalytic antibacterial nanocomposites were successfully synthesized by in situ Sonogashira polymerization. TiO₂ was uniformly dispersed onto the surface and within the CMP which show the microporous nature with narrow pore size distribution. The high crystallinity and thermal stability of the CMP/TiO₂ nanocomposites are attractive for use as antibacterial materials. The composites we prepared showed excellent photocatalytic antibacterial properties for the inactivation of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) under visible light irradiation. The photocatalytic antibacterial rates of nanocomposites against E. coli and S. aureus after 120 min of visible light irradiation were 98.14% and 100%, respectively. The superoxide anion (O₂^-) was confirmed to be an important substance in the antibacterial process above. The cytocompatibility of the antibacterial agents was studied in terms of cytotoxicity against NIH 3T3 fibroblasts. More than 95% of the cells were still alive in the presence of the nanocomposites, both without and with light irradiation, indicating the good cytocompatibility of the nanocomposites. Judging from the excellent photocatalytic antibacterial properties and ultralow toxicity of nanocomposites, these materials can be used in many fields such as medical treatment, transportation and construction.

Modeling of Degradation of Diazo Dye in Swirl-Flow Photocatalytic Reactor: Response Surface Approach

Photocatalytic degradation of Direct Blue 15 (DB15), an azo dye, was studied using a swirl-flow monolithic reactor under UV irradiation. The degradation reactions were carried out to investigate effects of initial dye concentration, catalyst loading, and light intensity at an optimal pH. The experiments were designed and mathematically modelled by CCD-RSM (central composite design-response surface methodology) approach. It was found that the selected parameters significantly affect DB15 degradation. In terms of the linear term, catalyst loading and light intensity had a synergistic effect, while dye concentration registered the opposite effect. Strong interaction was observed between catalyst loading and both light intensity and initial dye concentration compared with the interaction of light intensity and initial dye concentration. Based on the experimental results, a quadratic model was developed to predict the percentage removal of DB15. The predicted values of the model were in good agreement with the experimental values (R2 = 0.987), indicating the model fits well for the parameter space for which experiments were performed. According to diagnostic plots, the model credibility was valid because its residuals were distributed normally and exhibited a random pattern based on their examination versus the predicted values. The results revealed that the initial dye concentration and catalyst concentration have a significant effect on the mineralization time.

Synthesis and Characterization of N- Doped ZnO-γAl2O3 Nanoparticles for Photo-catalytic Application

In this study, photo-catalytic degradation of methyl orange (MO) azo dye was examined by undoped and Ce2O3/ CuO/ N doped ZnO nanoparticles stabilized on γAl2O3. Highest photo-catalytic activity was observed for the N-doped 10 wt. % ZnO-γAl2O3 sample. One of the optimal points with the complete MO decomposition was determined at an initial concentration of 8.25 ppm, pH 3.25, catalyst loading of 0.36 g/L and 12.56 W UV-light irradiation after 120 min. Physical and chemical properties of materials were investigated by X-ray diffraction analysis (XRD), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) and UV–visible diffuse reflectance spectroscopy (DRS) method. The experimental data were best fitted by a Langmuir-Hinshelwood approach photo-catalysis developed kinetic reaction rate in the form of $- r = 0.2797\, {I^{0.5}}\, {[Cat.]^{0.5}}\, \, [Dye]{\text{ }}/\, \, \, 1 + 0.1079\, {[Dye]_0}\, + \, 0.4086\, {I^{0.5}}\, {[Cat.]^{0.5}}$.