Removal of Hydroxychloroquine Using Engineered Biochar from Algal Biodiesel Industry Waste: Characterization and Design of Experiment (DoE)

A Box-Behnken design-based chemometric approach to optimize the sono-photodegradation of hydroxychloroquine in water media using the Fe(0)/S2O82-/UV system

The huge utilization of hydroxychloroquine in autoimmune infections led to an abnormal increment in its concentration in wastewater, which can pose a real risk to the environment, necessitating the development of a pretreatment technique. To do this, we are interested in researching how hydroxychloroquine degrades in contaminated water. The main goal of this investigation is to optimize the operating conditions for the sono-photodegradation of hydroxychloroquine in water using an ultrasound-assisted Fe(0)/S 2 O 8 2 - /UV system. To get adequate removal of HCQ, a chemometric method based on the Box-Behnken design was applied to optimize the influence of the empirical parameters selected, including Fe(0) dose,S 2 O 8 2 - concentration, pH, and initial HCQ concentration. The quadratic regression model representing the HCQ removal rate (η(%)) was evolved and validated by ANOVA. The optimal conditions as a result of the above-mentioned trade-off between the four input variables, with η(%) as the dependent output variable, were captured using RSM methodology and the composite desirability function approach. For HCQ full decomposition, the optimal values of the operating factors are as follows:S 2 O 8 2 - dose, 194.309 mg/L; Fe(0) quantity, 198.83 mg/L; pH = 2.017, and HCQ initial dose of 296.406 mg/L. Under these conditions, the HCQ removal rate, achieved after 60 min of reaction, attained 98.95%.

Microalgae-based biochar production and applications: A comprehensive review

Biochar, a solid carbonaceous substance synthesized from the thermochemical degradation of biomass, holds significant potential in addressing global challenges such as soil degradation, environmental pollution, and climate change. Its potential as a carbon sequestration agent, together with its versatile applications in soil amendments, pollutant adsorption, and biofuel production, has garnered attention. On the other hand, microalgae, with their outstanding photosynthetic efficiency, adaptability, and ability to accumulate carbohydrates and lipids, have demonstrated potential as emerging feedstock for biochar production. However, despite the significant potential of microalgal biochar, our current understanding of its various aspects, such as the influence of parameters, chemical modifications, and applications, remains limited. Therefore, this review aims to provide a comprehensive analysis of microalgae-based biochar, covering topics such as production techniques, pollutant removal, catalytic applications, soil amendments, and synthesis of carbon quantum dots to bridge the existing knowledge gap in this field.

Hydroxychloroquine Adsorption in Aqueous Medium Using Clinoptilolite Zeolite

The presence of drugs on a large scale in aquatic matrices raises concern and requires the study of efficient technologies to remove these compounds. This study investigated the adsorption capacity of the natural zeolite clinoptilolite (CP) in removing the drug hydroxychloroquine (HCQ). Zeolite was characterized by BET, XRD, FT-IR, SEM, and pH_pzc techniques. The kinetic model that best fits the experimental data was the pseudo-first-order and the SIPS isotherm provided the best fit. The Langmuir isotherm RL separation factor (> 0.01) indicated that the adsorption process was favorable and the Freundlich isotherm (n > 1) suggested that the adsorption mechanism occurred mainly by physisorption, with intraparticle diffusion as the step limiting the process. The process was spontaneous (ΔG°_ads < 0), endothermic (ΔH°_ads > 0), and with increased randomness at the solid-solution interface (ΔS°_ads > 0). The initial pH variation of the effluent was not favorable for the adsorption process and the zeolite was easily regenerated for later use. The ecotoxicological tests with Artemia salina and Lactuca Sativa proved that the final effluent did not show toxicity after the adsorption treatment. Based on the results obtained in this work, clinoptilolite zeolite is a potential adsorbent for reducing HCQ toxicity in aquatic matrices.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11270-022-05787-3.

Effects of the COVID-19 pandemic on the environment, waste management, and energy sectors: a deeper look into the long-term impacts

The COVID-19 pandemic not only has caused a global health crisis but also has significant environmental consequences. Although many studies are confirming the short-term improvements in air quality in several countries across the world, the long-term negative consequences outweigh all the claimed positive impacts. As a result, this review highlights the positive and the long-term negative environmental effects of the COVID-19 pandemic by evaluating the scientific literature. Remarkable reduction in the levels of CO (3 - 65%), NO2 (17 - 83%), NOx (24 - 47%), PM2.5 (22 - 78%), PM10 (23 - 80%), and VOCs (25 - 57%) was observed during the lockdown across the world. However, according to this review, the pandemic put enormous strain on the present waste collection and treatment system, resulting in ineffective waste management practices, damaging the environment. The extensive usage of face masks increased the release of microplastics/nanoplastics (183 to 1247 particles piece-1) and organic pollutants in land and water bodies. Furthermore, the significant usages of anti-bacterial hand sanitizers, disinfectants, and pharmaceuticals have increased the accumulation of various toxic emerging contaminants (e.g., triclocarban, triclosan, bisphenol-A, hydroxychloroquine) in the treated sludge/biosolids and discharged wastewater effluent, posing great threats to the ecosystems. This review also suggests strategies to create long-term environmental advantages. Thermochemical conversions of solid wastes including medical wastes and for treated wastewater sludge/biosolids offer several advantages through recovering the resources and energy and stabilizing/destructing the toxins/contaminants and microplastics in the precursors.

Taguchi L25 (54) Approach for Methylene Blue Removal by Polyethylene Terephthalate Nanofiber-Multi-Walled Carbon Nanotube Composite

A membrane composed of polyethylene terephthalate nanofiber and multi-walled carbon nanotubes (PET NF-MWCNTs) composite is used to adsorb methylene blue (MB) dye from an aqueous solution. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction techniques are employed to study the surface properties of the adsorbent. Several parameters affecting dye adsorption (pH, MB dye initial concentration, PET NF-MWCNTs dose, and contact time) are optimized for optimal removal efficiency (R, %) by using the Taguchi L25 (54) Orthogonal Array approach. According to the ANOVA results, pH has the highest contributing percentage at 71.01%, suggesting it has the most significant impact on removal efficiency. The adsorbent dose is the second most affected (12.08%), followed by the MB dye initial concentration of 5.91%, and the least affected is the contact time (1.81%). In addition, experimental findings confirm that the Langmuir isotherm is well-fitted, suggesting a monolayer capping of MB dye on the PET-NF-MWCNT surface with a maximum adsorption capacity of 7.047 mg g−1. Also, the kinetic results are well-suited to the pseudo-second-order model. There is a good agreement between the calculated (qe) and experimental values for the pseudo-second-order kinetic model.

Achieving Electrochemical-Sustainable-Based Solutions for Monitoring and Treating Hydroxychloroquine in Real Water Matrix

Hydroxychloroquine (HCQ) has been extensively consumed due to the Coronavirus (COVID-19) pandemic. Therefore, it is increasingly found in different water matrices. For this reason, the concentration of HCQ in water should be monitored and the treatment of contaminated water matrices with HCQ is a key issue to overcome immediately. Thus, in this study, the development of technologies and smart water solutions to reach the Sustainable Development Goal 6 (SDG6) is the main objective. To do that, the integration of electrochemical technologies for their environmental application on HCQ detection, quantification and degradation was performed. Firstly, an electrochemical cork-graphite sensor was prepared to identify/quantify HCQ in river water matrices by differential pulse voltammetric (DPV) method. Subsequently, an HCQ-polluted river water sample was electrochemically treated with BDD electrode by applying 15, 30 and 45 mA cm−2. The HCQ decay and organic matter removal was monitored by DPV with composite sensor and chemical oxygen demand (COD) measurements, respectively. Results clearly confirmed that, on the one hand, the cork-graphite sensor exhibited good current response to quantify of HCQ in the river water matrix, with limit of detection and quantification of 1.46 mg L−1 (≈3.36 µM) and 4.42 mg L−1 (≈10.19 µM), respectively. On the other hand, the electrochemical oxidation (EO) efficiently removed HCQ from real river water sample using BDD electrodes. Complete HCQ removal was achieved at all applied current densities; whereas in terms of COD, significant removals (68%, 71% and 84% at 15, 30 and 45 mA cm−2, respectively) were achieved. Based on the achieved results, the offline integration of electrochemical SDG6 technologies in order to monitor and remove HCQ is an efficient and effective strategy.

Removal of hydroxychloroquine from an aqueous solution using living microalgae: Effect of operating parameters on removal efficiency and mechanisms

Wastewater contaminated with hydroxychloroquine (HCQ) poses a serious threat to the environment and human life. This study aimed to evaluate the ability of living microalgae to remove HCQ from an aqueous solution. Batch mode experiments were conducted under different conditions to investigate the effect of operating parameters on HCQ removal efficiency and mechanisms. Equilibrium, kinetic and thermodynamic study was also carried out to better describe the interactions between HCQ and microalgae. The maximum HCQ removal was 92.10 ± 1.25% obtained under optimal pH of 9.9 ± 0.1, a contact time of 45 min, a stirring speed of 300 rpm, an initial HCQ concentration of 20 mg/L, and a microalgae dose of 100 mg/L. The Langmuir isotherm and the pseudo-second-order kinetic model were best suited for the biosorption experiments, and the maximum biosorption capacity was 339.02 mg/g. The thermodynamic study showed that the biosorption process was exothermic and spontaneous. Experiments on real wastewater showed that the HCQ removal was not significantly affected by the presence of other contaminants in the water. PRACTITIONER POINTS: The best HCQ removal was 92.10 ± 1.25% obtained under optimal conditions. The Langmuir isotherm and the pseudo-second-order kinetic model were best suited for the biosorption experiments. The maximum biosorption capacity was 339.02 mg/g. The thermodynamic study showed that the biosorption process was exothermic and spontaneous. The microalgae studied can be successfully used in HCQ removal from water.