Modification of rice husk silica with bovine serum albumin (BSA) for improvement in adsorption of metanil yellow dye

Room temperature fabrication of cobalt mullite for the snappy adsorption of cationic and anionic dyes

Cobalt mullite adsorbent for the robust adsorption performance toward Victoria Blue (VB) and Metanil Yellow (MY) is fabricated by the sol-gel method at room temperature using dipropylamine as a structure-directing agent. The synthesized adsorbent is characterized by XRD, FT-IR, and HRTEM. From these analyses, it is found that dipropylamine binds with the alumina and cobalt oxide, which makes it into tetrahedral to octahedral form. This interaction causes the formation of cobalt mullite. It is observed that trigonal alumina and orthorhombic cobalt mullite are interlinked to form a hybrid network. The special feature of adopting this adsorbent for the adsorption of VB and MY is that it has a large amount of Brønsted acid site because of the octahedral coordination of Al and Co. The large availability of acid sites in the framework and hybridization of two different network systems favors robust adsorption. The rate of adsorption (K₂ = 0.00402 g/mg.min for VB and K₂ = 0.004 g/mg.min for MY) and adsorption capacity (Q_e = 102.041 mg/g for VB and Q_e = 19.0406 mg/g for MY) are greater for VB than MY. This may be due to the more steric factor involved in MY than VB. Thermodynamic parameter indicated that the adsorption of VB and MY is spontaneous, endothermic, and increased randomness in the adsorbent-adsorbate interface. The results from the enthalpy value (ΔH° = 65.43 kJ/mol for VB and ΔH° = 44.729 kJ/mol for MY) revealed that the chemisorption is involved in the adsorption process.

Synthesis of hybrid framework of tenorite and octahedrally coordinated aluminosilicate for the robust adsorption of cationic and anionic dyes

Adsorption is an important process for the industrial dye effluent treatment. Many adsorbents are employed such as activated carbon, metal oxide, molecular sieves etc. All those adsorbents are having their own setbacks like longer adsorption time and lower adsorption capacity. So development of fast adsorption and higher adsorption capacity is very much essential. In this view, we synthesized hybrid crystal system of tenorite and aluminosilicate framework (CuO@AS) for the faster adsorption. It is characterized by FT-IR, HRTEM and WAXRD. WAXRD proved the hybridization of two crystal systems viz tenorite & alumina in monoclinic phase and silica in trigonal phase. The crystal structure drawn based on the WAXRD data. It is observed that the tenorite and aluminosilicate framework are separate, but they are interlinked through Cu-O-Al and Cu-O-Si bond. This interconnection makes the aluminium in six coordination and Cu in four coordination. Aluminium and copper has 3 and 2 Brønsted acid sites respectively. Moreover, copper has three more OH group, so totally 5 H⁺ and 3 OH^- sites in copper and aluminium are responsible for the faster adsorption with high adsorption capacity compared to reported literature. To test the adsorption tendency, Victoria Blue (VB) and Metanil Yellow (MY) dyes are employed at room temperature. The rate constant of Pseudo-second order kinetics for the VB and MY are 0.002462 g mg^-1 min^-1 and 0.001619 g mg^-1 min^-1 which indicated faster adsorption of VB than MY. Moreover, total adsorption capacity for VB (636 mg/g) is higher than MY (52 mg/g). This is due to the hybridization of tenorite and aluminosilicate. Thermodynamic data such as ΔG°, ΔH° and ΔS° revealed that the adsorption is spontaneous, chemisorption and highly disordered in the adsorbent-adsorbate interface. This disorderness is due to the disordered pores present in the material.

A comprehensive review of anionic azo dyes adsorption on surface-functionalised silicas

Surface -functionalised silica networks are advanced adsorbents. They have been given much attention for treating wastewater using the adsorption technique due to the silanol reactivity, resulting in strong binding affinities towards many pollutants. This review discusses the removal of anionic azo dyes utilising various functional groups such as amines, surfactants, polymers, macrocyclic, and other chelating groups functionalised on silica's surface. This review also reveals the steadily increasing interest in surface-functionalised silicas as adsorbents, emphasising the scholarly advancements in this field as a platform for future research. For that, adsorption capacities with different experimental conditions have been compared. The possible adsorption mechanisms, rate-limiting step, and factors affecting the anionic azo dye adsorption process have been comprehensively discussed. This review discloses that adsorbent characteristics such as porosity and functional groups, besides structural properties of an anionic azo dye, significantly affect adsorption. The adsorption process followed the Langmuir isotherm and pseudo-second-order models, with a predominantly spontaneous and endothermic nature. Multiple interactions, including electrostatic interaction, π-π interactions, and hydrogen bonding, are observed between dyes and functionalised silicas, indicating the adsorption process's complexity. Regeneration and cost-economic analysis are also presented to provide a roadmap for sustainable improvements. Chemical and biological regeneration techniques restore > 80% of the spent functionalised silicas. There is a significant opportunity to improve their efficiencies and regenerability, resulting in surface-functionalised silicas being used commercially instead of only in the laboratory. Finally, future research has been proposed by identifying current research gaps, particularly concerning the application of functionalised silicas in wastewater treatment.