PCL/β-TCP Composite Scaffolds Exhibit Positive Osteogenic Differentiation with Mechanical Stimulation

Polycaprolactone in Bone Tissue Engineering: A Comprehensive Review of Innovations in Scaffold Fabrication and Surface Modifications

Bone tissue engineering has seen significant advancements with innovative scaffold fabrication techniques such as 3D printing. This review focuses on enhancing polycaprolactone (PCL) scaffold properties through structural modifications, including surface treatments, pore architecture adjustments, and the incorporation of biomaterials like hydroxyapatite (HA). These modifications aim to improve scaffold conformation, cellular behavior, and mechanical performance, with particular emphasis on the role of mesenchymal stem cells (MSCs) in bone regeneration. The review also explores the potential of integrating nanomaterials and graphene oxide (GO) to further enhance the mechanical and biological properties of PCL scaffolds. Future directions involve optimizing scaffold structures and compositions for improved bone tissue regeneration outcomes.

Advancing bone regeneration: Unveiling the potential of 3D cell models in the evaluation of bone regenerative materials

Bone, a rigid yet regenerative tissue, has garnered extensive attention for its impressive healing abilities. Despite advancements in understanding bone repair and creating treatments for bone injuries, handling nonunions and large defects remains a major challenge in orthopedics. The rise of bone regenerative materials is transforming the approach to bone repair, offering innovative solutions for nonunions and significant defects, and thus reshaping orthopedic care. Evaluating these materials effectively is key to advancing bone tissue regeneration, especially in difficult healing scenarios, making it a critical research area. Traditional evaluation methods, including two-dimensional cell models and animal models, have limitations in predicting accurately. This has led to exploring alternative methods, like 3D cell models, which provide fresh perspectives for assessing bone materials' regenerative potential. This paper discusses various techniques for constructing 3D cell models, their pros and cons, and crucial factors to consider when using these models to evaluate bone regenerative materials. We also highlight the significance of 3D cell models in the in vitro assessments of these materials, discuss their current drawbacks and limitations, and suggest future research directions. STATEMENT OF SIGNIFICANCE: This work addresses the challenge of evaluating bone regenerative materials (BRMs) crucial for bone tissue engineering. It explores the emerging role of 3D cell models as superior alternatives to traditional methods for assessing these materials. By dissecting the construction, key factors of evaluating, advantages, limitations, and practical considerations of 3D cell models, the paper elucidates their significance in overcoming current evaluation method shortcomings. It highlights how these models offer a more physiologically relevant and ethically preferable platform for the precise assessment of BRMs. This contribution is particularly significant for "Acta Biomaterialia" readership, as it not only synthesizes current knowledge but also propels the discourse forward in the search for advanced solutions in bone tissue engineering and regeneration.

Composite PCL Scaffold With 70% β-TCP as Suitable Structure for Bone Replacement

OBJECTIVES

The purpose of this work was to optimise printable polycaprolactone (PCL)/β-tricalcium phosphate (β-TCP) biomaterials with high percentages of β-TCP endowed with balanced mechanical characteristics to resemble human cancellous bone, presumably improving osteogenesis.

METHODS

PCL/β-TCP scaffolds were obtained from customised filaments for fused deposition modelling (FDM) 3D printing with increasing amounts of β-TCP. Samples mechanical features, surface topography and wettability were evaluated as well as cytocompatibility assays, cell adhesion and differentiation.

RESULTS

The parameters of the newly fabricated materila were optimal for PCL/β-TCP scaffold fabrication. Composite surfaces showed higher hydrophilicity compared with the controls, and their surface roughness sharply was higher, possibly due to the presence of β-TCP. The Young's modulus of the composites was significantly higher than that of pristine PCL, indicating that the intrinsic strength of β-TCP is beneficial for enhancing the elastic modulus of the composite biomaterials. All novel composite biomaterials supported greater cellular growth and stronger osteoblastic differentiation compared with the PCL control.

CONCLUSIONS

This project highlights the possibility to fabricat, through an FDM solvent-free approach, PCL/β-TCP scaffolds of up to 70 % concentrations of β-TCP. overcoming the current lmit of 60 % stated in the literature. The combination of 3D printing and customised biomaterials allowed production of highly personalised scaffolds with optimal mechanical and biological features resembling the natural structure and the composition of bone. This underlines the promise of such structures for innovative approaches for bone and periodontal regeneration.

3D-printed polycaprolactone scaffolds coated with beta tricalcium phosphate for bone regeneration

BACKGROUND/PURPOSE

3D-printing technology is an important tool for the bone tissue engineering (BTE). The aim of this study was to investigate the interaction of polycaprolactone (PCL) scaffolds and modified mesh PCL coated with beta TCP (PCL/β-TCP) scaffolds with MG-63.

METHODS

This study used the fused deposition modeling (FDM) technique with the 3D printing technique to fabricate the thermoplastic polymer and composite scaffolds. Scaffold structure and coating quality were observed under a scanning electron microscope (SEM). MG-63 cells were injected and attached to the mesh-manufactured PCL scaffolds. The biocompatibility of mesh structured PCL and PCL/β-TCP scaffolds could be examined by measuring the viability of MG-63 cells of MTT assay. Bone cell differentiation was evaluated ALP activity by mineralization assay.

RESULTS

The results showed that both mesh PCL scaffolds and PCL/β-TCP scaffolds were non-toxic to the cells. The ALP activities of cells in PCL/β-TCP scaffolds groups were significant differences and better than PCL groups in all groups at all experimental dates. The mineralization process was time-dependent, and significantly higher mineralization of osteosarcoma cells was observed on PCL/β-TCP scaffolds at experimental dates.

CONCLUSION

We concluded that both meshes structured PCL and PCL/β-TCP scaffolds could promote the MG-63 cell growth, and PCL/β-TCP was better than the PCL scaffolds for the outcome of MG63 cell differentiation and mineralization.

Surgical Site-Released Tissue Is Potent to Generate Bone onto TCP and PCL-TCP Scaffolds In Vitro

There is evidence that surgical site tissue (SSRT) released during orthopedic surgery has a strong mesenchymal regenerative potential. Some data also suggest that this tissue may activate synthetic or natural bone substitute materials and can thus upgrade its osteopromoting properties. In this comparative in vitro study, we investigate the composition of SSRT during total hip replacement (n = 20) harvested using a surgical suction handle. In addition, the osteopromoting effect of the cells isolated from SSRT is elucidated when incubated with porous beta-tricalcium phosphate (β-TCP) or 80% medical-grade poly-ε-caprolactone (PCL)/20% TCP composite material. We identified multiple growth factors and cytokines with significantly higher levels of PDGF and VEGF in SSRT compared to peripheral blood. The overall number of MSC was 0.09 ± 0.12‱ per gram of SSRT. A three-lineage specific differentiation was possible in all cases. PCL-TCP cultures showed a higher cell density and cell viability compared to TCP after 6 weeks in vitro. Moreover, PCL-TCP cultures showed a higher osteocalcin expression but no significant differences in osteopontin and collagen I synthesis. We could demonstrate the high regenerative potential from SSRT harvested under vacuum in a PMMA filter device. The in vitro data suggest advantages in cytocompatibility for the PCL-TCP composite compared to TCP alone.

Electrical stimulation therapy and rotary jet-spinning scaffold to treat bone defects

The combination of electrical stimulation (ES) and bone tissue engineering (BTE) has been successful in treatments of bone regeneration. This study evaluated the effects of ES combined with PCL + β-TCP 5% scaffolds obtained by rotary jet spinning (RJS) in the regeneration of bone defects in the calvaria of Wistar rats. We used 120 animals with induced bone defects divided into 4 groups (n = 30): (C) without treatment; (S) with PCL+ β-TCP 5% scaffold; (ES) treated with ES (10 μA/5 min); (ES + S) with PCL + β-TCP 5% scaffold. The ES occurred twice a week during the entire experimental period. Cell viability (in vitro: Days 3 and 7) and histomorphometric, histochemical, and immunohistochemical (in vivo; Days 30, 60, and 90) analysis were performed. In vitro, ES + S increased cell viability after Day 7 of incubation. In vivo, it was observed modulation of inflammatory cells in ES therapy, which also promoted blood vessels proliferation, and increase of collagen. Moreover, ES therapy played a role in osteogenesis by decreasing ligand kappa B nuclear factor-TNFSF11 (RANKL), increasing alkaline phosphatase (ALP), and decreasing the tartarate-resistant acid phosphatase. The combination of ES with RJS scaffolds may be a promising strategy for bone defects regeneration, since the therapy controlled inflammation, favored blood vessels proliferation, and osteogenesis, which are important processes in bone remodeling.

Advancements and Utilizations of Scaffolds in Tissue Engineering and Drug Delivery

The drug development process requires a thorough understanding of the scaffold and its three-dimensional structure. Scaffolding is a technique for tissue engineering and the formation of contemporary functioning tissues. Tissue engineering is sometimes referred to as regenerative medicine. They also ensure that drugs are delivered with precision. Information regarding scaffolding techniques, scaffolding kinds, and other relevant facts, such as 3D nanostructuring, are discussed in depth in this literature. They are specific and demonstrate localized action for a specific reason. Scaffold's acquisition nature and flexibility make it a new drug delivery technology with good availability and structural parameter management.

Three-Dimensional Printing of Customized Scaffolds with Polycaprolactone-Silk Fibroin Composites and Integration of Gingival Tissue-Derived Stem Cells for Personalized Bone Therapy

Regenerative biomaterials play a crucial role in the success of maxillofacial reconstructive procedures. Yet today, limited options are available when choosing polymeric biomaterials to treat critical size bony defects. Further, there is a requirement for 3D printable regenerative biomaterials to fabricate customized structures confined to the defect site. We present here a 3D printable composite formulation consisting of polycaprolactone (PCL) and silk fibroin microfibers and have established a robust protocol for fabricating customized 3D structures of complex geometry with the composite. The 3D printed composite scaffolds demonstrated higher compressive modulus than 3D printed scaffolds of PCL alone. Furthermore, the compressive modulus of PCL-Antheraea mylitta (AM) silk scaffolds is higher than that of the PCL-Bombyx mori (BM) silk scaffolds at their respective ratios. Compressive modulus of PCL-25AM silk scaffolds (73.4 MPa) is higher than that of PCL-25BM silk scaffolds (65.1 MPa). Compressive modulus of PCL-40AM silk scaffolds (106.1 MPa) is higher than that of PCL-40BM silk scaffolds (77.7 MPa). Moreover, we have isolated, characterized, and integrated human gingival mesenchymal stem cells (hGMSCs), an effective autologous cell source, onto the 3D printed scaffolds to evaluate their bone regeneration potential. The results demonstrated that PCL-silk microfiber composite scaffolds of Antheraea mylitta origin showed much higher bioactivity than the Bombyx mori ones because of arginine-glycine-aspartic acid (RGD) sequences present in the Antheraea mylitta silk fibroin protein favoring cell attachment and proliferation. By day 14, the metabolic activity of hGMSCs was highest in PCL-40AM (4.5 times higher than that at day 1). In addition, to show the translational potential of this work, we have fabricated a patient defect-specific model (mandible) using the CT scan obtained by the micro-CT imaging to understand the printability of the composite for fabricating complex structures to restore maxillofacial bony defects with precision when applied in a clinical scenario.

Delivering Mechanical Stimulation to Cells: State of the Art in Materials and Devices Design

Biochemical signals, such as growth factors, cytokines, and transcription factors are known to play a crucial role in regulating a variety of cellular activities as well as maintaining the normal function of different tissues and organs. If the biochemical signals are assumed to be one side of the coin, the other side comprises biophysical cues. There is growing evidence showing that biophysical signals, and in particular mechanical cues, also play an important role in different stages of human life ranging from morphogenesis during embryonic development to maturation and maintenance of tissue and organ function throughout life. In order to investigate how mechanical signals influence cell and tissue function, tremendous efforts have been devoted to fabricating various materials and devices for delivering mechanical stimuli to cells and tissues. Here, an overview of the current state of the art in the design and development of such materials and devices is provided, with a focus on their design principles, and challenges and perspectives for future research directions are highlighted.

In vivo evaluation of 3D printed polycaprolactone composite scaffold and recombinant human bone morphogenetic protein-2 for vertical bone augmentation with simultaneous implant placement on rabbit calvaria

This study evaluated 3D printed polycaprolactone (PCL) composite scaffold and recombinant human bone morphogenetic protein-2 (rhBMP-2), loaded either onto a PCL composite scaffold or implant surface, for vertical bone augmentation with implant placement. Three-dimensional printed PCL frames were filled with powdered PCL, hydroxyapatite, and β-tricalcium phosphate. RhBMP-2 was loaded to the PCL composite scaffolds and implant surfaces, and rhBMP-2 release was quantified for 21 days. Experimental implants were placed bilaterally on 20 rabbit calvaria, and the PCL composite scaffolds were vertically augmented. The randomly allocated experimental groups were divided by carrier and rhBMP-2 dosage as no rhBMP-2 (control), 5 μg rhBMP-2 loaded to PCL composite (Scaffold/rhBMP-2[5 μg]), 5 μg rhBMP-2 loaded to implant (Implant/rhBMP-2[5 μg]), 30 μg rhBMP-2 loaded to PCL composite (Scaffold/rhBMP-2[30 μg]), and 30 μg rhBMP-2 loaded to implant (Implant/rhBMP-2[30 μg]). Histologic and histometric analyses were conducted after 8 weeks. In both scaffold-loading and implant-loading, rhBMP-2 released initially rapidly, then slowly and constantly. Released rhBMP-2 totaled 23.02 ± 1.03% and 24.69 ± 1.14% in the scaffold-loaded and implant-loaded groups, respectively. There were no significant differences in histologic bone-implant contact (%). Peri-implant bone density (%) was significantly higher in the Scaffold/rhBMP-2(30 μg) and Implant/rhBMP-2(30 μg) groups. Total bone density (%) was not significantly different between the Scaffold/rhBMP-2(5 μg), Implant/rhBMP-2(5 μg), and control groups, or between the Scaffold/rhBMP-2(30 μg) and Implant/rhBMP-2(30 μg) groups, but was significantly higher in the Scaffold/rhBMP-2(30 μg) and Implant/rhBMP-2(30 μg) groups than in the controls. Three-dimensional printed PCL composite scaffold with rhBMP-2 produced vertical osteogenesis and osseointegration, regardless of rhBMP-2 loading to the PCL composite scaffold or implant surface.

Design and Analysis of a Biodegradable Polycaprolactone Flow Diverting Stent for Brain Aneurysms

The flow diverting stent (FDS) has become a promising endovascular device for the treatment of aneurysms. This research presents a novel biodegradable and non-braided Polycaprolactone (PCL) FDS. The PCL FDS was designed and developed using an in-house fabrication unit and coated on two ends with BaSO₄ for angiographic visibility. The mechanical flexibility and quality of FDS surfaces were examined with the UniVert testing machine, scanning electron microscope (SEM), and 3D profilometer. Human umbilical vein endothelial cell (HUVEC) adhesion, proliferation, and cell morphology studies on PCL FDS were performed. The cytotoxicity and NO production by HUVECs with PCL FDS were also conducted. The longitudinal tensile, radial, and bending flexibility were found to be 1.20 ± 0.19 N/mm, 0.56 ± 0.11 N/mm, and 0.34 ± 0.03 N/mm, respectively. The FDS was returned to the original shape and diameter after repeated compression and bending without compromising mechanical integrity. Results also showed that the proliferation and adhesion of HUVECs on the FDS surface increased over time compared to control without FDS. Lactate dehydrogenase (LDH) release and NO production showed that PCL FDS were non-toxic and satisfactory. Cell morphology studies showed that HUVECs were elongated to cover the FD surface and developed an endothelial monolayer. This study is a step forward toward the development and clinical use of biodegradable flow diverting stents for endovascular treatment of the aneurysm.

Modifications in Gene Expression in the Process of Osteoblastic Differentiation of Multipotent Bone Marrow-Derived Human Mesenchymal Stem Cells Induced by a Novel Osteoinductive Porous Medical-Grade 3D-Printed Poly(ε-caprolactone)/β-tricalcium Phosphate Composite

In this work, we evaluated the influence of a novel hybrid 3D-printed porous composite scaffold based on poly(ε-caprolactone) (PCL) and β-tricalcium phosphate (β-TCP) microparticles in the process of adhesion, proliferation, and osteoblastic differentiation of multipotent adult human bone marrow mesenchymal stem cells (ah-BM-MSCs) cultured under basal and osteogenic conditions. The in vitro biological response of ah-BM-MSCs seeded on the scaffolds was evaluated in terms of cytotoxicity, adhesion, and proliferation (AlamarBlue Assay®) after 1, 3, 7, and 14 days of culture. The osteogenic differentiation was assessed by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red Solution, ARS), expression of surface markers (CD73, CD90, and CD105), and reverse transcription-quantitative polymerase chain reaction (qRT-PCR) after 7 and 14 days of culture. The scaffolds tested were found to be bioactive and biocompatible, as demonstrated by their effects on cytotoxicity (viability) and extracellular matrix production. The mineralization and ALP assays revealed that osteogenic differentiation increased in the presence of PCL/β-TCP scaffolds. The latter was also confirmed by the gene expression levels of the proteins involved in the ossification process. Our results suggest that similar bio-inspired hybrid composite materials would be excellent candidates for osteoinductive and osteogenic medical-grade scaffolds to support cell proliferation and differentiation for tissue engineering, which warrants future in vivo research.

3D Printed Composite Scaffolds in Bone Tissue Engineering: A systematic review

OBJECTIVE

This study aimed to analyze the effect of fabrication factors on both biological and physico-chemical features of 3-dimensional (3D) printed composite scaffolds.

METHOD

Electronic search was done according to the PRISMA guideline in PubMed and Scopus databases limited to English articles published until May 2021.Studies in which composite scaffolds were fabricated through computer-aided design and computer-aided manufacturing (CAD-CAM)-based methods were included.Articles regarding the features of the scaffolds fabricated through indirect techniques were excluded.

RESULTS

Full text of 121 studies were reviewed, and 69 met the inclusion criteria. According to analyzed studies, PCL and HA were the most commonly used polymer and ceramic,respectively. Besides,the Solvent-based technique was the most commonly used composition technique, which enabled preparing blends with high concentrations of ceramic materials. The most common fabrication method used in the included studies was Fused deposition modeling (FDM).The addition of bio-ceramics enhanced the mechanical features and the biological behaviors of the printed scaffolds in a ratio-dependent manner. However,studies that analyzed the effect of ceramic weight ratio showed that scaffolds with the highest ceramic content did not necessarily possess the optimal biological and non-biological features.

CONCLUSION

The biological and physico-chemical behaviors of the scaffold can be affected by pre-printing factors, including utilized materials, composition techniques, and fabrication methods. Fabricating scaffolds with high mineral content as of the natural bone may not provide the optimal condition for bone formation. Therefore, it is recommended that future studies compare the efficiency of different kinds of biomaterials rather than different weight ratios of one type.

Innovations in Craniofacial Bone and Periodontal Tissue Engineering - From Electrospinning to Converged Biofabrication

From a materials perspective, the pillars for the development of clinically translatable scaffold-based strategies for craniomaxillofacial (CMF) bone and periodontal regeneration have included electrospinning and 3D printing (biofabrication) technologies. Here, we offer a detailed analysis of the latest innovations in 3D (bio)printing strategies for CMF bone and periodontal regeneration and provide future directions envisioning the development of advanced 3D architectures for successful clinical translation. First, the principles of electrospinning applied to the generation of biodegradable scaffolds are discussed. Next, we present on extrusion-based 3D printing technologies with a focus on creating scaffolds with improved regenerative capacity. In addition, we offer a critical appraisal on 3D (bio)printing and multitechnology convergence to enable the reconstruction of CMF bones and periodontal tissues. As a future outlook, we highlight future directions associated with the utilization of complementary biomaterials and (bio)fabrication technologies for effective translation of personalized and functional scaffolds into the clinics.

Bioscaffolds embedded with regulatory modules for cell growth and tissue formation: A review

The demand for artificial organs has greatly increased because of various aging-associated diseases and the wide need for organ transplants. A recent trend in tissue engineering is the precise reconstruction of tissues by the growth of cells adhering to bioscaffolds, which are three-dimensional (3D) structures that guide tissue and organ formation. Bioscaffolds used to fabricate bionic tissues should be able to not only guide cell growth but also regulate cell behaviors. Common regulation methods include biophysical and biochemical stimulations. Biophysical stimulation cues include matrix hardness, external stress and strain, surface topology, and electromagnetic field and concentration, whereas biochemical stimulation cues include growth factors, proteins, kinases, and magnetic nanoparticles. This review discusses bioink preparation, 3D bioprinting (including extrusion-based, inkjet, and ultraviolet-assisted 3D bioprinting), and regulation of cell behaviors. In particular, it provides an overview of state-of-the-art methods and devices for regulating cell growth and tissue formation and the effects of biophysical and biochemical stimulations on cell behaviors. In addition, the fabrication of bioscaffolds embedded with regulatory modules for biomimetic tissue preparation is explained. Finally, challenges in cell growth regulation and future research directions are presented.

Progress and Prospects of Polymer-Based Drug Delivery Systems for Bone Tissue Regeneration

Despite the high regenerative capacity of bone tissue, there are some cases where bone repair is insufficient for a complete functional and structural recovery after damage. Current surgical techniques utilize natural and synthetic bone grafts for bone healing, as well as collagen sponges loaded with drugs. However, there are certain disadvantages associated with these techniques in clinical usage. To improve the therapeutic efficacy of bone tissue regeneration, a number of drug delivery systems based on biodegradable natural and synthetic polymers were developed and examined in in vitro and in vivo studies. Recent studies have demonstrated that biodegradable polymers play a key role in the development of innovative drug delivery systems and tissue engineered constructs, which improve the treatment and regeneration of damaged bone tissue. In this review, we discuss the most recent advances in the field of polymer-based drug delivery systems for the promotion of bone tissue regeneration and the physical-chemical modifications of polymers for controlled and sustained release of one or more drugs. In addition, special attention is given to recent developments on polymer nano- and microparticle-based drug delivery systems for bone regeneration.

Osteointegration of 3D-Printed Fully Porous Polyetheretherketone Scaffolds with Different Pore Sizes

Polyetheretherketone (PEEK) constitutes a preferred alternative material for orthopedic implants owing to its good mechanical properties and biocompatibility. However, the poor osseointegration property of PEEK implants has limited their clinical applications. To address this issue, in this study, we investigated the mechanical and biological properties of fully porous PEEK scaffolds with different pore sizes both in vitro and in vivo. PEEK scaffolds with designed pore sizes of 300, 450, and 600 μm and a porosity of 60% were manufactured via fused deposition modeling (FDM) to explore the optimum pore size. Smooth solid PEEK cylinders (PEEK-S) were used as the reference material. The mechanical, cytocompatibility, proliferative, and osteogenic properties of PEEK scaffolds were characterized in comparison to those of PEEK-S. In vivo dynamic contrast-enhanced magnetic resonance imaging, microcomputed tomography, and histological observation were performed after 4 and 12 weeks of implantation to evaluate the microvascular perfusion and bone formation afforded by the various PEEK implants using a New Zealand white rabbit model with distal femoral condyle defects. Results of in vitro testing supported the good biocompatibility of the porous PEEK scaffolds manufactured via FDM. In particular, the PEEK-450 scaffolds were most beneficial for cell adhesion, proliferation, and osteogenic differentiation. Results of in vivo analysis further indicated that PEEK-450 scaffolds exhibited preferential potential for bone ingrowth and vascular perfusion. Together, our findings support that porous PEEK implants designed with a suitable pore size and fabricated via three-dimensional printing constitute promising alternative biomaterials for bone grafting and tissue engineering applications with marked potential for clinical applications.

Biomimetic bone regeneration using angle-ply collagen membrane-supported cell sheets subjected to mechanical conditioning

Bone injuries are common and new strategies are desired for achieving ideal bone regeneration for bone defect repair. Scaffolds with bone-mimicking characteristics may provide an appropriate microenvironment to promote bone regeneration. Meanwhile, mechanical stimulation effectively regulates a wide range of cellular behaviors such as cell proliferation and differentiation. In this study, biomimetic multi-layer cell-collagen constructs with angle-ply structural feature were prepared by assembling micropatterned collagen membranes on which aligned MC3T3-E1 cells were cultured. The anisotropic microgrooved collagen membranes effectively guided the alignment of cells and promoted the osteogenic differentiation of them. To further promote cell differentiation and extracellular matrix production, the multi-layer cell-collagen constructs were cultured under mechanical conditioning through cyclic stretching. It was found that the constructs with both cell alignment and mechanical conditioning resulted in better osteogenic potential than those with cell alignment or mechanical conditioning alone. Upon implantation into the critical-sized calvarial defects of mice, the constructs with both cell alignment and mechanical conditioning achieved best new bone formation efficacy. Together, findings from this study reveal that synergized use of microstructural and mechanical cues may provide an effective new approach toward bone regeneration. STATEMENT OF SIGNIFICANCE: Biomimicking is an effective strategy to promote bone regeneration for repairing bone defects. Although numerous studies which micro-structurally mimicked native bone using various scaffolds, far less studies have paid attention to the mechanical environment of bone. In this study, angle-ply collagen membrane-supported cell sheets were prepared and pre-conditioned using mechanical loading prior to implantation at bone defects. The constructs with cell alignment and subjected to mechanical conditioning resulted in better osteogenic differentiation of cells in vitro and new bone formation in vivo than those with cell alignment or mechanical conditioning alone. Therefore, recapitulation of both microstructural and mechanical features of native bone may result in a synergistic effect and provides an effective approach toward bone regeneration.

3D printing of bone tissue engineering scaffolds

Tissue engineering is promising in realizing successful treatments of human body tissue loss that current methods cannot treat well or achieve satisfactory clinical outcomes. In scaffold-based bone tissue engineering, a high performance scaffold underpins the success of a bone tissue engineering strategy and a major direction in the field is to produce bone tissue engineering scaffolds with desirable shape, structural, physical, chemical and biological features for enhanced biological performance and for regenerating complex bone tissues. Three-dimensional (3D) printing can produce customized scaffolds that are highly desirable for bone tissue engineering. The enormous interest in 3D printing and 3D printed objects by the science, engineering and medical communities has led to various developments of the 3D printing technology and wide investigations of 3D printed products in many industries, including biomedical engineering, over the past decade. It is now possible to create novel bone tissue engineering scaffolds with customized shape, architecture, favorable macro-micro structure, wettability, mechanical strength and cellular responses. This article provides a concise review of recent advances in the R & D of 3D printing of bone tissue engineering scaffolds. It also presents our philosophy and research in the designing and fabrication of bone tissue engineering scaffolds through 3D printing.

Osteogenic differentiation ability of human mesenchymal stem cells on Chitosan/Poly (Caprolactone)/nano beta Tricalcium Phosphate composite scaffolds

Our work depicts the development and characterization of Chitosan/Poly (caprolactone)/nano beta-Tricalcium phosphate (CS/PCL/β-TCP) porous composite scaffolds by freeze drying method. Addition of PCL to CS/β-TCP composite scaffolds had significantly increased the compressive strength besides decelerating the degradation rate. Human mesenchymal stem cells (hMSCs) were chosen to assess in-vitro biocompatibility of the prepared scaffolds in terms of cell viability, cell attachment and proliferation by MTT assay, SEM and DNA Quantification assays respectively. Further, increased osteogenic differentiation assay results (Alkaline Phosphatase assay and Total calcium content) revealed the role of β-TCP in composite scaffolds. Altogether, results suggest the potentiality of prepared porous freeze dried composite scaffolds in bone tissue engineering applications.

Near-Infrared Contrast Agents for Bone-Targeted Imaging

Background

For the bone-specific imaging, a structure-inherent targeting of bone tissue recently has been reported a new strategy based on incorporation of targeting moieties into the chemical structure of near-infrared (NIR) contrast agents, while conventional methods require covalent conjugation of bone-targeting ligands to NIR contrast agents. This will be a new approach for bone-targeted imaging by using the bifunctional NIR contrast agents.

Methods

The goal of this review is to provide an overview of the recent advances in optical imaging of bone tissue, highlighting the structure-inherent targeting by developing NIR contrast agents without the need for a bone-targeting ligand such as bisphosphonates.

Results

A series of iminodiacetated and phosphonated NIR contrast agents for the structure-inherent targeting of bone tissue showed excellent bone-targeting ability in vivo without non-specific binding. Additionally, the phosphonated NIR contrast agents could be useful in the diagnosis of bone metastasis.

Conclusion

By developing bone-targeted NIR contrast agents, optical imaging of bone tissue makes it very attractive for preclinical studies of bone growth or real-time fluorescence guided surgery resulting in high potential to shift the clinical paradigms.

Suppression of SPRY4 Promotes Osteogenic Differentiation and Bone Formation of Mesenchymal Stem Cell

The directed differentiation of human adipose-derived stem cells (hASCs) into different cell types has shown great therapeutic potential in treating various diseases. To maximize the therapeutic potentials, researchers have tried manipulating master transcriptional genes that promote efficient differentiation of mesenchymal stem cells (MSCs) such as the MAPK/ERK signaling pathway. Sprouty (SPRY) is a family of proteins that are known to inhibit the MAPK/ERK signaling pathway. Although the role of some SPRY isoforms in MSC differentiation is known, the function of SPRY4 isoform has not been fully elucidated. In the present study, the role of SPRY4 in the multilineage differentiation of hASCs has been elucidated. To investigate the role of SPRY4 in hASC differentiation and tissue regeneration, we performed a transient knockdown of SPRY expression via a small interfering RNA (siSPRY4). Western blot and quantitative polymerase chain reaction results revealed that the treatment of siSPRY4 before induction of differentiation had no significant effect on adipogenic, but reduced chondrogenic, differentiation of hASCs. Interestingly, SPRY4 transient knockdown had a significant effect on the osteogenic differentiation as indicated by the increased messenger RNA (mRNA) and protein expression of osteogenic markers such as alkaline phosphatase (ALP; 2.3-fold) and osteopontin (OPN; 3.5-fold) and increased calcium deposition measured via Alizarin red staining (3.3-fold). Moreover, in vivo tissue regeneration of siSPRY4-treated hASCs in ectopic bone formation and calvarial defect mouse models showed higher bone volume (5.24-fold) and trabecular number (4.59-fold) assessed via histological and microcomputed tomography analyses. We also determined that the enhanced osteogenic differentiation in SPRY4-treated hASCs was due to the induction of ERK1/2 phosphorylation. Taken together, our results suggest that the regulation of SPRY4 through MAPK signaling is a potentially critical aspect on the osteogenic differentiation of hASCs and for bone tissue regeneration, and thus, may be utilized as a potent technique in the development of effective bone therapeutics. Impact Statement This study tried to expand our current understanding of the osteogenic differentiation of mesenchymal stem cells. The transient downregulation of the SPRY4 expression via small interfering RNA (siRNA) showed significant enhancement of the osteogenic differentiation of adipose-derived stem cells via the induction of ERK 1/2 phosphorylation. This suggests the possible mechanism to maximize the potential of stem cell as therapeutics and has a great potential in treating various bone-related diseases.

PCL-Based Composite Scaffold Matrices for Tissue Engineering Applications

Biomaterial-based scaffolds are important cues in tissue engineering (TE) applications. Recent advances in TE have led to the development of suitable scaffold architecture for various tissue defects. In this narrative review on polycaprolactone (PCL), we have discussed in detail about the synthesis of PCL, various properties and most recent advances of using PCL and PCL blended with either natural or synthetic polymers and ceramic materials for TE applications. Further, various forms of PCL scaffolds such as porous, films and fibrous have been discussed along with the stem cells and their sources employed in various tissue repair strategies. Overall, the present review affords an insight into the properties and applications of PCL in various tissue engineering applications.

Sustained drug release using cobalt oxide nanowires for the preparation of polymer-free drug-eluting stents

Polymer-based drug-eluting stents (DESs) represented attractive application for the treatment of cardiovascular diseases; however, polymer coating has caused serious adverse responses to tissues such as chronic inflammation due to acidic by-products. Therefore, polymer-free DESs have recently emerged as promising candidates for the treatment; however, burst release of drug(s) from the surface limited its applications. In this study, we focused on delivery of therapeutic drug from polymer-free (or -less) DESs through surface modification using cobalt oxide nanowires (Co₃O₄ NWs) to improve and control the drug release. The results demonstrated that Co₃O₄ NWs could be simply fabricated on cobalt-chromium substrate by ammonia-evaporation-induced method. The Co₃O₄ NWs were uniformly arrayed with diameters of 50-100 nm and lengths of 10 µm. It was found that Co₃O₄ NWs were comparatively stable without any delamination or change of the morphology under in vitro long-term stability using circulating system. Sirolimus was used as a model drug for studying in vitro release behavior under physiological conditions. The sirolimus release behavior from flat cobalt-chromium showed an initial burst (over 90%) after one day. On the other hand, Co₃O₄ NWs presented a sustained sirolimus release rate for up to seven days. Similarly, the polymer-less specimens on Co₃O₄ NWs substrates sustained sirolimus release for a longer-period of time when compared to flat Co-Cr substrates. In summary, the current approach of using Co₃O₄ NWs-based substrates might have a great potential to sustain drug release for drug-eluting implants and medical devices including stents.

Synergistically enhanced osteoconductivity and anti-inflammation of PLGA/β-TCP/Mg(OH)2 composite for orthopedic applications

Synthetic biodegradable polymers including poly(lactide-co-glycolide) (PLGA) have been widely used as alternatives to metallic implantable materials in the orthopedic field due to their superior biocompatibility and biodegradability. However, weak mechanical properties of the biodegradable polymers and inflammatory reaction caused by the acidic degradation products have limited their biomedical applications. In this study, we have developed a PLGA composite containing beta-tricalcium phosphate (β-TCP) and magnesium hydroxide (Mg(OH)₂) as additives to improve mechanical, osteoconductivity, and anti-inflammation property of the biopolymer composite simultaneously. The β-TCP has an osteoconductive effect and the Mg(OH)₂ has a pH neutralizing effect. The PLGA/inorganic composites were uniformly blended via a twin extrusion process. The mechanical property of the PLGA/β-TCP/Mg(OH)₂ composite was improved compared to the pure PLGA. In particular, the addition of Mg(OH)₂ suppressed the inflammatory reaction of normal human osteoblast (NHOst) cells and also inhibited the differentiation of pre-osteoclastic cells into osteoclasts. Moreover, synergistically upregulated late osteogenic differentiation of NHOst cells was observed on the PLGA/β-TCP/Mg(OH)₂ composite. Taken all together, we believe that the use of β-TCP and Mg(OH)₂ as additives with synthetic biodegradable polymers has great potential by the synergistic effect in orthopedic applications.

Double intratibial injection of human tonsil-derived mesenchymal stromal cells recovers postmenopausal osteoporotic bone mass

BACKGROUND AND AIMS

Osteoporosis, which is a disease characterized by weakening of the bone, affects a large portion of the senior population. The current therapeutic options for osteoporosis have side effects, and there is no effective treatment for severe osteoporosis. Thus, we urgently need new treatment strategies, such as topical therapies and/or safe and effective stem cell therapies.

METHODS

We investigated the therapeutic potential of directly injecting human tonsil-derived mesenchymal stem cells (TMSC) into the right proximal tibias of ovariectomized postmenopausal osteoporosis model mice. Injections were given once (1×) or twice (2×) during the 3-month experimental period. At the end of the experiment, micro-computed tomographic images revealed some improvement in the proximal tibias and more significant improvement in the femoral heads of treated mice.

RESULTS

Osteogenic effect was qualitatively and quantitatively more pronounced in TMSC/2×-treated mice. Furthermore, TMSC/2× mice exhibited significant recovery of the serum osteocalcin level, which is pathologically elevated in osteoporosis, and increased serum alkaline phosphatase, which indicates bone formation. TMSC therapy was generally well tolerated and caused no apparent toxicity in the experimental mice. Moreover, TMSC therapy reduced visceral fat.

CONCLUSION

Our results demonstrate that double injection of TMSC directly into the proximal tibia triggers recovery of osteoporosis, and thus could be a potential therapeutic approach for severe bone loss.