Coral-Like Yolk-Shell-Structured Nickel Oxide/Carbon Composite Microspheres for High-Performance Li-Ion Storage Anodes

A stable hybrid catalyst (POM-PPPh3/L/Ni) for the reduction of toxic nitroarene compounds in water

Reduction of nitroarenes to aminoarenes using novel and selective catalysts is an important and desirable approach in green chemistry. In this work, a new heterogeneous nanocatalyst, POM-PPPh3/L/Ni, was designed and prepared via functionalizing a Keggin-type polyoxometalate (H3PMo12O40) with (3-bromopropyl)triphenylphosphonium bromide (BPPPh3Br) through strong electrostatic interactions to prepare [PMo12O40][PPPh3]3 (denoted as POM-PPPh3). The obtained compound was modified via nucleophilic attack of the nitrogen donor of a multidentate Schiff base ligand (L) on its propyl chain to produce [PMo12O40][PPPh3/L]2 (denoted as POM-PPPh3/L), which was finally metallated with nickel cations to achieve [PMo12O40][PPPh3/L/Ni]2 (denoted as POM-PPPh3/L/Ni). After full characterization of the prepared material with various physicochemical methods, its catalytic behavior was investigated in the catalytic nitroarene reduction. The influence of various factors on catalytic conversion and selectivity was considered. The synthesized nanocatalyst showed excellent performance in the reduction of nitroarenes in aqueous media in the presence of NaBH4 as a reducing agent. Mild reaction conditions and a short reaction time (10 min) are the prominent features of this new nanocatalyst. In addition, the catalyst was recovered and reused for up to four cycles of catalytic reduction without any significant loss of conversion.

The in situ phosphorization inducing oxygen vacancies in the core-shell structured NiFe oxides boosts the electrocatalytic activity for the oxygen evolution reaction

Transition metal-based oxides have been reported as an important family of electrocatalysts for water splitting owing to their possible large-scale applications that are highly desirable for the hydrogen generation industry. Herein, we report a facile method for the preparation of phosphate-decorated NiFe oxides on nickel foam as efficient oxygen evolution reaction (OER) electrocatalysts for water oxidation. The OER electrocatalysts were developed through the pyrolysis of MIL(Fe) metal-organic frameworks (MOFs), which were modified with Ni and P species. It was found that the formation of NiO on the Fe2O3 surface (NiO@Fe2O3) can enrich electrocatalytic active sites for the OER. Meanwhile, the incorporation of P into NiO@Fe2O3 (Px-NiO@Fe2O3) creates abundant oxygen vacancies, which facilitates the surface charge transfer for OER electrocatalysis. Benefiting from the structure and composition advantages, P2.0-NiO@Fe2O3/NF exhibits the best performance for OER electrocatalysis among other prepared electrocatalysts, with an overpotential of 208 mV at the OER current density of 10 mA cm-2 and a small Tafel slope of 69.64 mV dec-1 in 1 M KOH solution. Additionally, P2.0-NiO@Fe2O3/NF shows an outstanding durability for the OER electrocatalysis, maintaining the OER current density above 20 mA cm-2 for more than 100 h.

Flowers Like α-MoO3/CNTs/PANI Nanocomposites as Anode Materials for High-Performance Lithium Storage

Lithium-ion batteries (LIBs) have been explored to meet the current energy demands; however, the development of satisfactory anode materials is a bottleneck for the enhancement of the electrochemical performance of LIBs. Molybdenum trioxide (MoO₃) is a promising anode material for lithium-ion batteries due to its high theoretical capacity of 1117 mAhg^-1 along with low toxicity and cost; however, it suffers from low conductivity and volume expansion, which limits its implementation as the anode. These problems can be overcome by adopting several strategies such as carbon nanomaterial incorporation and polyaniline (PANI) coating. Co-precipitation method was used to synthesize α-MoO₃, and multi-walled CNTs (MWCNTs) were introduced into the active material. Moreover, these materials were uniformly coated with PANI using in situ chemical polymerization. The electrochemical performance was evaluated by galvanostatic charge/discharge, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). XRD analysis revealed the presence of orthorhombic crystal phase in all the synthesized samples. MWCNTs enhanced the conductivity of the active material, reduced volume changes and increased contact area. MoO₃-(CNT)_12% exhibited high discharge capacities of 1382 mAhg^-1 and 961 mAhg^-1 at current densities of 50 mAg^-1 and 100 mAg^-1, respectively. Moreover, PANI coating enhanced cyclic stability, prevented side reactions and increased electronic/ionic transport. The good capacities due to MWCNT_S and the good cyclic stability due to PANI make these materials appropriate for application as the anode in LIBs.

Porous Microspheres Comprising CoSe2 Nanorods Coated with N-Doped Graphitic C and Polydopamine-Derived C as Anodes for Long-Lived Na-Ion Batteries

Metal-organic framework-templated nitrogen-doped graphitic carbon (NGC) and polydopamine-derived carbon (PDA-derived C)-double coated one-dimensional CoSe₂ nanorods supported highly porous three-dimensional microspheres are introduced as anodes for excellent Na-ion batteries, particularly with long-lived cycle under carbonate-based electrolyte system. The microspheres uniformly composed of ZIF-67 polyhedrons and polystyrene nanobeads (ϕ = 40 nm) are synthesized using the facile spray pyrolysis technique, followed by the selenization process (P-CoSe₂@NGC NR). Further, the PDA-derived C-coated microspheres are obtained using a solution-based coating approach and the subsequent carbonization process (P-CoSe₂@PDA-C NR). The rational synthesis approach benefited from the synergistic effects of dual carbon coating, resulting in a highly conductive and porous nanostructure that could facilitate rapid diffusion of charge species along with efficient electrolyte infiltration and effectively channelize the volume stress. Consequently, the prepared nanostructure exhibits extraordinary electrochemical performance, particularly the ultra-long cycle life stability. For instance, the advanced anode has a discharge capacity of 291 (1000th cycle, average capacity decay of 0.017%) and 142 mAh g^-1 (5000th cycle, average capacity decay of 0.011%) at a current density of 0.5 and 2.0 A g^-1, respectively.

Rational Design of Perforated Bimetallic (Ni, Mo) Sulfides/N-doped Graphitic Carbon Composite Microspheres as Anode Materials for Superior Na-Ion Batteries

Highly conductive 3D ordered mesoporous Ni₇ S₆ -MoS₂ /N-doped graphitic carbon (NGC) composite (P-NiMoS/C) microspheres are prepared as anode materials for Na-ion batteries. The rationally designed nanostructure comprises stable Ni₇ S₆ - and MoS₂ -phases along with the homogeneously distributed ordered mesopores (ϕ = 50 nm) over the external and internal structures generated through thermal decomposition of polystyrene nanobeads (ϕ = 100 nm). Therefore, the P-NiMoS/C microspheres deliver initial discharge capacities of 662, 419, 373, 300, 231, 181, and 146 mA h g^-1 at current densities of 0.5, 1, 2, 4, 6, 8, and 10 A g^-1 , respectively. Furthermore, P-NiMoS/C exhibits a stable discharge capacity of 444 mA h g^-1 at the end of the 150th cycle at a current density of 0.5 A g^-1 , indicating higher cycling stability than the filled, that is, non-mesoporous, Ni₃ S₂ -MoS₂ /NGC (F-NiMoS/C) microspheres and filled carbon-free Ni₃ S₂ -MoS₂ (F-NiMoS) microspheres. The superior electrochemical performance of P-NiMoS/C microspheres is attributed to the rapid Na⁺ ion diffusion, alleviation of severe volume stress during prolonged cycling, and higher electrical conductivity of NGC, which results in fast charge transfer during the redox processes. The results in the present study can provide fundamental knowledge for the development of multicomponent, porous, and highly conductive anodes for various applications.

Electrochemical Lithium Storage Performance of Molten Salt Derived V2SnC MAX Phase

MAX phases are gaining attention as precursors of two-dimensional MXenes that are intensively pursued in applications for electrochemical energy storage. Here, we report the preparation of V₂SnC MAX phase by the molten salt method. V₂SnC is investigated as a lithium storage anode, showing a high gravimetric capacity of 490 mAh g^-1 and volumetric capacity of 570 mAh cm^-3 as well as superior rate performance of 95 mAh g^-1 (110 mAh cm^-3) at 50 C, surpassing the ever-reported performance of MAX phase anodes. Supported by operando X-ray diffraction and density functional theory, a charge storage mechanism with dual redox reaction is proposed with a Sn-Li (de)alloying reaction that occurs at the edge sites of V₂SnC particles where Sn atoms are exposed to the electrolyte followed by a redox reaction that occurs at V₂C layers with Li. This study offers promise of using MAX phases with M-site and A-site elements that are redox active as high-rate lithium storage materials.

Vapor-phase production of nanomaterials

The synthesis of nanomaterials, with characteristic dimensions of 1 to 100 nm, is a key component of nanotechnology. Vapor-phase synthesis of nanomaterials has numerous advantages such as high product purity, high-throughput continuous operation, and scalability that have made it the dominant approach for the commercial synthesis of nanomaterials. At the same time, this class of methods has great potential for expanded use in research and development. Here, we present a broad review of progress in vapor-phase nanomaterial synthesis. We describe physically-based vapor-phase synthesis methods including inert gas condensation, spark discharge generation, and pulsed laser ablation; plasma processing methods including thermal- and non-thermal plasma processing; and chemically-based vapor-phase synthesis methods including chemical vapor condensation, flame-based aerosol synthesis, spray pyrolysis, and laser pyrolysis. In addition, we summarize the nanomaterials produced by each method, along with representative applications, and describe the synthesis of the most important materials produced by each method in greater detail.

Microwave-Assisted Synthesis of Ge/GeO2-Reduced Graphene Oxide Nanocomposite with Enhanced Discharge Capacity for Lithium-Ion Batteries

Germanium/germanium oxide nanoparticles with theoretically high discharge capacities of 1624 and 2152 mAh/g have attracted significant research interest for their potential application as anode materials in Li-ion batteries. However, these materials exhibit poor long-term performance due to the large volume change of 370% during charge/discharge cycles. In the present study, to overcome this shortcoming, a Ge/GeO2/graphene composite material was synthesized. Ge/GeO2 nanoparticles were trapped between matrices of graphene nanosheets to offset the volume expansion effect. Transmission electron microscopy images revealed that the Ge/GeO2 nanoparticles were distributed on the graphene nanosheets. Discharge/charge experiments were performed to evaluate the Li storage properties of the samples. The discharge capacity of the bare Ge/GeO2 nanoparticles in the first discharge cycle was considerably large; however, the value decreased rapidly with successive cycles. Conversely, the present Ge/GeO2/graphene composite exhibited superior cycling stability.

Effect of interfacial defects on the electronic properties of MoS2 based lateral T–H heterophase junctions

Our systematic study shows significant improvement in transport properties of MoS2-based lateral T–H heterophase junctions when interfacial defects are present.

Porous SnO2/C Nanofiber Anodes and LiFePO4/C Nanofiber Cathodes with a Wrinkle Structure for Stretchable Lithium Polymer Batteries with High Electrochemical Performance

Stretchable lithium batteries have attracted considerable attention as components in future electronic devices, such as wearable devices, sensors, and body-attachment healthcare devices. However, several challenges still exist in the bid to obtain excellent electrochemical properties for stretchable batteries. Here, a unique stretchable lithium full-cell battery is designed using 1D nanofiber active materials, stretchable gel polymer electrolyte, and wrinkle structure electrodes. A SnO2/C nanofiber anode and a LiFePO4/C nanofiber cathode introduce meso- and micropores for lithium-ion diffusion and electrolyte penetration. The stretchable full-cell consists of an elastic poly(dimethylsiloxane) (PDMS) wrapping film, SnO2/C and LiFePO4/C nanofiber electrodes with a wrinkle structure fixed on the PDMS wrapping film by an adhesive polymer, and a gel polymer electrolyte. The specific capacity of the stretchable full-battery is maintained at 128.3 mAh g-1 (capacity retention of 92%) even after a 30% strain, as compared with 136.8 mAh g-1 before strain. The energy densities are 458.8 Wh kg-1 in the released state and 423.4 Wh kg-1 in the stretched state (based on the electrode), respectively. The high capacity and stability in the stretched state demonstrate the potential of the stretchable battery to overcome its limitations.

Advances in Ultrasonic Spray Pyrolysis Processing of Noble Metal Nanoparticles-Review

In the field of synthesis and processing of noble metal nanoparticles, the study of the bottom-up method, called Ultrasonic Spray Pyrolysis (USP), is becoming increasingly important. This review analyses briefly the features of USP, to underline the physical, chemical and technological characteristics for producing nanoparticles and nanoparticle composites with Au and Ag. The main aim is to understand USP parameters, which are responsible for nanoparticle formation. There are two nanoparticle formation mechanisms in USP: Droplet-To-Particle (DTP) and Gas-To-Particle (GTP). This review shows how the USP process is able to produce Au, Ag/TiO2, Au/TiO2, Au/Fe2O3 and Ag/(Y0.95 Eu0.05)2O3 nanoparticles, and presents the mechanisms of formation for a particular type of nanoparticle. Namely, the presented Au and Ag nanoparticles are intended for use in nanomedicine, sensing applications, electrochemical devices and catalysis, in order to benefit from their properties, which cannot be achieved with identical bulk materials. The development of new noble metal nanoparticles with USP is a constant goal in Nanotechnology, with the objective to obtain increasingly predictable final properties of nanoparticles.

Hierarchically Well-Developed Porous Graphene Nanofibers Comprising N-Doped Graphitic C-Coated Cobalt Oxide Hollow Nanospheres As Anodes for High-Rate Li-Ion Batteries

Hierarchically well-developed porous graphene nanofibers comprising N-doped graphitic C (NGC)-coated cobalt oxide hollow nanospheres are introduced as anodes for high-rate Li-ion batteries. For this, three strategies, comprising the Kirkendall effect, metal-organic frameworks, and compositing with highly conductive C, are applied to the 1D architecture. In particular, NGC layers are coated on cobalt oxide hollow nanospheres as a primary transport path of electrons followed by graphene-nanonetwork-constituting nanofibers as a continuous and secondary electron transport path. Superior cycling performance is achieved, as the unique nanostructure delivers a discharge capacity of 823 mAh g^-1 after 500 cycles at 3.0 A g^-1 with a low decay rate of 0.092% per cycle. The rate capability is also noteworthy as the structure exhibits high discharge capacities of 1035, 929, 847, 787, 747, 703, 672, 650, 625, 610, 570, 537, 475, 422, 294, and 222 mAh g^-1 at current densities of 0.5, 1.5, 3, 5, 7, 10, 12, 15, 18, 20, 25, 30, 40, 50, 80, and 100 A g^-1 , respectively. In view of the highly efficient Li⁺ ion/electron diffusion and high structural stability, the present nanostructuring strategy has a huge potential in opening new frontiers for high-rate and long-lived stable energy storage systems.

Octahedral morphology of NiO with (111) facet synthesized from the transformation of NiOHCl for the NOx detection and degradation: experiment and DFT calculation

NiO with polar (111) facets was successfully synthesized from the transformation of a layered NiOHCl, exhibiting excellent NO_x detection and degradation activity.

Facile synthesis of SnO2@carbon nanocomposites for lithium-ion batteries

SnO₂@C nanocomposite nanostructure approach is demonstrated, which confers shielding for volume expansion because of carbon. The SnO₂@C nanocomposite anode exhibits superior cycling stability and rate capability due to the stable electrode structure.

Supercapattery and full-cell lithium-ion battery performances of a [Ni(Schiff base)]-derived Ni/NiO/nitrogen-doped carbon heterostructure

[Ni(Schiff base)]-derived Ni/NiO on the conductive carbon network is explored as an electrode material for high-performance supercapatteries and lithium-ion batteries.

Advances in the synthesis and design of nanostructured materials by aerosol spray processes for efficient energy storage

The increasing demand for energy storage has motivated the search for highly efficient electrode materials for use in rechargeable batteries with enhanced energy density and longer cycle life. One of the most promising strategies for achieving improved battery performance is altering the architecture of nanostructured materials employed as electrode materials in the energy storage field. Among numerous synthetic methods suggested for the fabrication of nanostructured materials, aerosol spray techniques such as spray pyrolysis, spray drying, and flame spray pyrolysis are reliable, as they are facile, cost-effective, and continuous processes that enable the synthesis of nanostructured electrode materials with desired morphologies and compositions with controlled stoichiometry. The post-treatment of spray-processed powders enables the fabrication of oxide, sulfide, and selenide nanostructures hybridized with carbonaceous materials including amorphous carbon, reduced graphene oxide, carbon nanotubes, etc. In this article, recent progress in the synthesis of nanostructured electrode materials by spray processes and their general formation mechanisms are discussed in detail. A brief introduction to the working principles of each spray process is given first, and synthetic strategies for the design of electrode materials for lithium-ion, sodium-ion, lithium-sulfur, lithium-selenium, and lithium-oxygen batteries are discussed along with some examples. This analysis sheds light on the synthesis of nanostructured materials by spray processes and paves the way toward the design of other novel and advanced nanostructured materials for high performance electrodes in rechargeable batteries of the future.

Large Scale Process for Low Crystalline MoO₃-Carbon Composite Microspheres Prepared by One-Step Spray Pyrolysis for Anodes in Lithium-Ion Batteries

This paper introduces a large-scale and facile method for synthesizing low crystalline MoO₃/carbon composite microspheres, in which MoO₃ nanocrystals are distributed homogeneously in the amorphous carbon matrix, directly by a one-step spray pyrolysis. The MoO₃/carbon composite microspheres with mean diameters of 0.7 µm were directly formed from one droplet by a series of drying, decomposition, and crystalizing inside the hot-wall reactor within six seconds. The MoO₃/carbon composite microspheres had high specific discharge capacities of 811 mA h g-1 after 100 cycles, even at a high current density of 1.0 A g-1 when applied as anode materials for lithium-ion batteries. The MoO₃/carbon composite microspheres had final discharge capacities of 999, 875, 716, and 467 mA h g-1 at current densities of 0.5, 1.5, 3.0, and 5.0 A g-1, respectively. MoO₃/carbon composite microspheres provide better Li-ion storage than do bare MoO₃ powders because of their high structural stability and electrical conductivity.