Hierarchical N-Doped Porous Carbons for Zn-Air Batteries and Supercapacitors

High Capacitance Performance N, O Codoped Carbon Foams Synthesized via an All-In-One Step Carbonization of Molecular Salt Strategy

The preparation of porous carbon is constrained by the extensive use and detrimental impact of activators and dopants. Therefore, developing green and efficient strategies that leverage the intrinsic properties and pretreatment of the materials to achieve self-activation and self-doping is particularly crucial for porous carbon materials. Herein, potassium histidine was utilized as the molecular salt precursor, attaining the efficient and streamlined preparation of porous carbon through a one-step carbonization process that enables self-activation, self-doping, and self-templating. More interestingly, the carbonization temperature significantly impacts the porous structure of the molecular salt precursors, the properties of the heteroatoms, and electrochemical performance. The designed electrodes exhibit high accessibility to electrolyte ions and effective ion-electron transport channels. Therefore, the optimal carbon material (KHis800) has an excellent mass-specific capacitance of 305.2 F g-1 at 0.2 A g-1, and a high capacitance retention rate of 115.6% (50,000 cycles at 5 A g-1). Notably, KHis800 also shows a maximum energy density of 19.6 Wh kg-1. This research is dedicated to exploring a more efficient preparation method for porous carbon material via molecular salts, offering insights for the sustainable development of carbon materials.

Electrocatalytic Oxygen Reduction Using Metastable Zirconium Suboxide

Strategies for discovery of high-performance electrocatalysts are important to advance clean energy technologies. Metastable phases such as low temperature or interfacial structures that are difficult to access in bulk may offer such catalytically active surfaces. We report here that the suboxide Zr3O, which is formed at Zr-ZrO2 interfaces but does not appear in the experimental Zr-O phase diagram exhibits outstanding oxygen reduction reaction (ORR) performance surpassing that of benchmark Pt/C and most transition metal-based catalysts. Addition of Fe3C nanoparticles to give a Zr-Zr3O-Fe3C/NC catalyst (NC=nitrogen-doped carbon) gives a half-wave potential (E1/2) of 0.914 V, outperforming Pt/C and showing only a 3 mV decrease after 20,000 electrochemical cycles. A zinc-air battery (ZAB) using this cathode material has a high power density of 241.1 mW cm-2 and remains stable for over 50 days of continuous cycling, demonstrating potential for practical applications. Zr3O demonstrates that interfacial or other phases that are difficult to stabilize may offer new directions for the discovery of high-performance electrocatalysts.

Hierarchical porous carbon materials for lithium storage: preparation, modification, and applications

Secondary battery as an efficient energy conversion device has been highly attractive for alleviating the energy crisis and environmental pollution. Hierarchical porous carbon (HPC) materials with multiple sizes pore channels are considered as promising materials for energy conversion and storage applications, due to their high specific surface area and excellent electrical conductivity. Although many reviews have reported on carbon materials for different fields, systematic summaries about HPC materials for lithium storage are still rare. In this review, we first summarize the main preparation methods of HPC materials, including hard template method, soft template method, and template-free method. The modification methods including porosity and morphology tuning, heteroatom doping, and multiphase composites are introduced systematically. Then, the recent advances in HPC materials on lithium storage are summarized. Finally, we outline the challenges and future perspectives for the application of HPC materials in lithium storage.

Insights into Nano- and Micro-Structured Scaffolds for Advanced Electrochemical Energy Storage

Adopting a nano- and micro-structuring approach to fully unleashing the genuine potential of electrode active material benefits in-depth understandings and research progress toward higher energy density electrochemical energy storage devices at all technology readiness levels. Due to various challenging issues, especially limited stability, nano- and micro-structured (NMS) electrodes undergo fast electrochemical performance degradation. The emerging NMS scaffold design is a pivotal aspect of many electrodes as it endows them with both robustness and electrochemical performance enhancement, even though it only occupies complementary and facilitating components for the main mechanism. However, extensive efforts are urgently needed toward optimizing the stereoscopic geometrical design of NMS scaffolds to minimize the volume ratio and maximize their functionality to fulfill the ever-increasing dependency and desire for energy power source supplies. This review will aim at highlighting these NMS scaffold design strategies, summarizing their corresponding strengths and challenges, and thereby outlining the potential solutions to resolve these challenges, design principles, and key perspectives for future research in this field. Therefore, this review will be one of the earliest reviews from this viewpoint.

Sn Bulk Phase Doping and Surface Modification on Ti4 O7 for Oxygen Reduction to Hydrogen Peroxide

Developing stable and highly selective two-electron oxygen reduction reaction (2e- ORR) electrocatalysts for producing hydrogen peroxide (H2 O2 ) is considered a major challenge to replace the anthraquinone process and achieve a sustainable green economy. Here, we doped Sn into Ti4 O7 (D-Sn-Ti4 O7 ) by simple polymerization post-calcination method as a high-efficiency 2e- ORR electrocatalyst. In addition, we also applied plain calcination after the grinding method to load Sn on Ti4 O7 (L-Sn-Ti4 O7 ) as a comparison. However, the performance of L-Sn-Ti4 O7 is far inferior to that of the D-Sn-Ti4 O7 . D-Sn-Ti4 O7 exhibits a starting potential of 0.769 V (versus the reversible hydrogen electrode, RHE) and a high H2 O2 selectivity of 95.7 %. Excitingly, the catalyst can maintain a stable current density of 2.43 mA ⋅ cm-2 for 3600 s in our self-made H-type cell, and the cumulative H2 O2 production reaches 359.2 mg ⋅ L-1 within 50,000 s at 0.3 V. The performance of D-Sn-Ti4 O7 is better than that of the non-noble metal 2e- ORR catalysts reported so far. The doping of Sn not only improves the conductivity but also leads to the lattice distortion of Ti4 O7 , further forming more oxygen vacancies and Ti3+ , which greatly improves its 2e- ORR performance compared with the original Ti4 O7 . In contrast, since the Sn on the surface of L-Sn-Ti4 O7 displays a synergistic effect with Tin+ (3≤n≤4) of Ti4 O7 , the active center Tin+ dissociates the O=O bond, making it more inclined to 4e- ORR.

Co-modified polyoxovanadoborates derived Co/BN-CNT/VN based bifunctional electrocatalysts for rechargeable zinc-air batteries

Rational design of high-performance bifunctional electrocatalysts to accelerate the sluggish oxygen reduction reactions (ORR) and oxygen evolution reactions (OER) in rechargeable Zn-air batteries remain an enduring challenge. The construction of multicomponent catalysts is a promising solution to achieve this goal. Herein, B and N co-doped interconnecting graphite carbon and carbon nanotube with the decoration of Co and vanadium nitride (VN) nanoparticles (Co/BN-CNT/VN) are synthesized using Co-modified polyoxovanadoborates as precursors. The optimized composite achieves superior bifunctional oxygen electrocatalytic activity and stability, which is comparable to noble metal catalysts and reported bifunctional electrocatalysts. Specifically, the half-potential of ORR reaches 0.85 V, and the overpotential of OER is low to 296 mV at a current density of 10 mA cm^-2. Strikingly, zinc-air batteries assembled based on Co/BN-CNT/VN demonstrate a small charge-discharge voltage gap of 0.873 V, a remarkable peak-power density of 156.3 mW cm^-2, and outstanding cycling durability (∼1000 cycles at 10 mA cm^-2). This work affords a new alternative strategy to create cost-effective and high-potency bifunctional oxygen electrocatalysts for advanced air batteries.

Molten salt-confined pyrolysis towards heteroatom-doped porous carbon nanosheets for high-energy-density Zn-ion hybrid supercapacitors

Carbon nanosheets with heteroatom doping and well-developed porosity exhibit broad application foreground for Zn-ion hybrid supercapacitors (ZHSCs), but the simple and controllable preparation is still of great challenge. In this study, by using LiCl-KCl as in-built templates, histidine as carbon and nitrogen sources, and KNO₃, K₂SO₄, KOH or Na₂S₂O₃ as active agent, a series of N and NS doped porous carbon nanosheets are developed. Results indicate that, with the activator introduction, pore structures of the carbonized products are notably boosted, showing an astounding 30-244 % increase in BET specific surface area, and meanwhile, heteroatom with a content of ca. 12 % can be doped into the resultant carbon skeletons. Specifically, the NSPCN-800 (activated by Na₂S₂O₃) with a large specific surface area of 1297 m²/g, a hierarchically porous structure composed of abundant micropores and mesopores, and a suitable heteroatom content (N: 11.9 wt%; S: 0.6 wt%) presents an impressive energy storage behavior as cathode for ZHSCs, including a specific capacitance of 165.8F/g, a specific capacity of 95.2 mAh/g, an energy density of 59.0 Wh kg^-1 and a cyclic stability with a 82.6 % capacity retention after 5000 cycles. These performance parameters surpass numerous reported ZHSCs, making NSPCN-800 a very promising cathode for practical use.

A Review on Mechanochemistry: Approaching Advanced Energy Materials with Greener Force

Mechanochemistry with solvent-free and environmentally friendly characteristics is one of the most promising alternatives to traditional liquid-phase-based reactions, demonstrating epoch-making significance in the realization of different types of chemistry. Mechanochemistry utilizes mechanical energy to promote physical and chemical transformations to design complex molecules and nanostructured materials, encourage dispersion and recombination of multiphase components, and accelerate reaction rates and efficiencies via highly reactive surfaces. In particular, mechanochemistry deserves special attention because it is capable of endowing energy materials with unique characteristics and properties. Herein, the latest advances and progress in mechanochemistry for the preparation and modification of energy materials are reviewed. An outline of the basic knowledge, methods, and characteristics of different mechanochemical strategies is presented, distinguishing this review from most mechanochemistry reviews that only focus on ball-milling. Next, this outline is followed by a detailed and insightful discussion of mechanochemistry-involved energy conversion and storage applications. The discussion comprehensively covers aspects of energy transformations from mechanical/optical/chemical energy to electrical energy. Finally, next-generation advanced energy materials are proposed. This review is intended to bring mechanochemistry to the frontline and guide this burgeoning field of interdisciplinary research for developing advanced energy materials with greener mechanical force.

A new rapid synthesis of hexagonal prism Zn-MOF as a precursor at room temperature for energy storage through pre-ionization strategy

In this paper, a new hexagonal prismatic Zn-MOF is rapidly synthesized at room temperature through a one-step precipitation method as precursor for the preparation of porous carbon. The SEM and GCD tests indicate that the pre-ionization process of BTC greatly accelerates the reaction speed between BTC and Zn ions, and only 0.5 h is required for the preparation of Zn-MOF with orderly morphology at room temperature, far less than 3-24 h of the existing hydrothermal synthesis. The derived porous carbon (BTCC) is provided with a considerable specific surface area of 1,464 m² g^-1 and suitable pores of 3.9 nm in size. Its richly porous structure offers a superior supercapacitor performance. The BTCC electrode offered a high specific capacitance and an excellent cycle stability. Furthermore, the assembled two symmetrical supercapacitors, C|1 M Na₂SO₄|C and C|6 M KOH|C, provide high energy density of 22.4 Wh kg^-1 and 13.7 Wh kg^-1, respectively. Their energy retention rates were 80.0% and 89.4%, respectively after 10,000 cycles at 20 A g^-1. The proposed pre-ionization strategy is a facile, convenient and easy-to-industrial method for the preparation of new MOFs, thereby significantly reducing the manufacturing cost of porous carbon for energy storage.

Hierarchical porous carbon materials synthesized from the castor oil/MgO solids for high-performance supercapacitors

A kind of biomass-based hierarchical porous carbons (HPCs) is easily synthesized by the direct pyrolysis of castor oil/MgO solids, in which the solids can be prepared by mixing appropriate amounts of MgO into castor oil. The morphology, microstructure, phase structure, textural property, surface element composition and thermal stability properties are studied for the achieved HPCs. It is demonstrated that the HPCs belong to a type of high-graphitization, graphene-like and foamed carbon materials with high specific surface area and wide pore size distribution. The HPC obtained at 900 °C (HPC-900) displays the highest specific surface area of 1013.17 m²g and more reasonable pore size distribution. Without the need of conductive agents, the HPC-900 exhibits a maximum capacitance (340 F g^-1at 0.5 A g^-1), excellent rate performance (70.1% of capacitance retention at high current density of 10 A g^-1) and a remarkable long-term cycling stability (about 99% capacitance retention after 9000 cycles) in the aqueous electrolyte of 6 M KOH. Meanwhile, assembled as-prepared sample into symmetrical supercapacitor, the HPC-900 provides a high energy and power density, with 8.6 Wh kg^-1and 426.7 W kg^-1in 1 M Na₂SO₄, respectively. The HPCs prepared based on castor oil show high potential for the electrode materials of supercapacitors.

N, P-Codoped Graphene Dots Supported on N-Doped 3D Graphene as Metal-Free Catalysts for Oxygen Reduction

Nitrogen and phosphorus-codoped graphene dots supported on nitrogen-doped three-dimensional graphene (N, P-GDs/N-3DG) have been synthesized by a facile freeze-annealing process. On the surface of the 3D interconnected porous structure, the N, P-GDs are uniformly dispersed. The as-prepared N, P-GDs/N-3DG material served as a metal-free catalyst for oxygen reduction reaction (ORR) in an alkaline medium and evaluated by a rotating ring-disk electrode. The N, P-GDs/N-3DG catalyst exhibits excellent ORR activity, which is comparable to that of the commercial Pt/C catalyst. Furthermore, it exhibits a higher tolerance to methanol and better stability than the Pt/C. This enhanced electrochemical catalytic performance can be ascribed to the presence of abundant functional groups and edge defects. This study indicates that P-N bonded structures play a vital role as the active sites in ORR.

Recent Advances on MOF Derivatives for Non-Noble Metal Oxygen Electrocatalysts in Zinc-Air Batteries

Oxygen electrocatalysts are of great importance for the air electrode in zinc-air batteries (ZABs). Owing to the high specific surface area, controllable pore size and unsaturated metal active sites, metal-organic frameworks (MOFs) derivatives have been widely studied as oxygen electrocatalysts in ZABs. To date, many strategies have been developed to generate efficient oxygen electrocatalysts from MOFs for improving the performance of ZABs. In this review, the latest progress of the MOF-derived non-noble metal-oxygen electrocatalysts in ZABs is reviewed. The performance of these MOF-derived catalysts toward oxygen reduction, and oxygen evolution reactions is discussed based on the categories of metal-free carbon materials, single-atom catalysts, metal cluster/carbon composites and metal compound/carbon composites. Moreover, we provide a comprehensive overview on the design strategies of various MOF-derived non-noble metal-oxygen electrocatalysts and their structure-performance relationship. Finally, the challenges and perspectives are provided for further advancing the MOF-derived oxygen electrocatalysts in ZABs.

Engineering Two-Phase Bifunctional Oxygen Electrocatalysts with Tunable and Synergetic Components for Flexible Zn-Air Batteries

Metal-air batteries, like Zn-air batteries (ZABs) are usually suffered from low energy conversion efficiency and poor cyclability caused by the sluggish OER and ORR at the air cathode. Herein, a novel bimetallic Co/CoFe nanomaterial supported on nanoflower-like N-doped graphitic carbon (NC) was prepared through a strategy of coordination construction-cation exchange-pyrolysis and used as a highly efficient bifunctional oxygen electrocatalyst. Experimental characterizations and density functional theory calculations reveal the formation of Co/CoFe heterostructure and synergistic effect between metal layer and NC support, leading to improved electric conductivity, accelerated reaction kinetics, and optimized adsorption energy for intermediates of ORR and OER. The Co/CoFe@NC exhibits high bifunctional activities with a remarkably small potential gap of 0.70 V between the half-wave potential (E_1/2) of ORR and the potential at 10 mA cm^‒2 (E_j=10) of OER. The aqueous ZAB constructed using this air electrode exhibits a slight voltage loss of only 60 mV after 550-cycle test (360 h, 15 days). A sodium polyacrylate (PANa)-based hydrogel electrolyte was synthesized with strong water-retention capability and high ionic conductivity. The quasi-solid-state ZAB by integrating the Co/CoFe@NC air electrode and PANa hydrogel electrolyte demonstrates excellent mechanical stability and cyclability under different bending states.

Porous 3D graphene aerogel co-doped with nitrogen and sulfur for high-performance supercapacitors

Heteroatom-doped carbon materials with a high specific area, a well-defined porous structure is important to high-performance supercapacitors (SCs). Here, S and N co-doped three-dimensional porous graphene aerogel (NS-3DPGHs) have been synthesized in a facile and efficient self-assembly process with thiourea acting as the reducing and doping agent solution. Operating as a SC electrode, fabricated co-doping graphene, i.e. the sample of NS-3DPGH-150 exhibits the highest specific capacitance of 412.9 F g^-1 under 0.5 A g^-1 and prominent cycle stabilization with 96.4% capacitance retention in the back of 10 000 cycles. Furthermore, based on NS-3DPGH-150, the symmetrical supercapacitor as-prepared in 6 M KOH displays a superior energy density of 12.9 Wh kg^-1 under the power density of 249 W kg^-1. Hence, NS-3DPGHs could be considered as an excellent candidate for SCs.

Facile Synthesis of Bimetallic Fluoride Heterojunctions on Defect-Enriched Porous Carbon Nanofibers for Efficient ORR Catalysts

The development of efficient and stable catalysts for the oxygen reduction reaction (ORR) at low cost is crucial for realizing the large-scale application of metal-air batteries. Herein, we report an efficient ORR catalyst of bimetallic copper and cobalt fluoride heterojunctions, which are uniformly dispersed in nitrogen-fluorine-oxygen triply doped porous carbon nanofibers (PCNFs) that contain hierarchical macro-meso-micro pores. The composite catalyst materials are fabricated with a facile and green method of electrospinning with water as the solvent. By using poly(tetrafluoroethylene) as the pore inducer to anchor electropositive copper and cobalt salts in the electrospun hybrid nanofibers, bimetallic fluoride heterojunctions can be directly formed in PCNFs after calcination. The hierachical porous structures provide an effective way to transport matter, while the bimetallic fluorides expose abundant electroactive sites, both of which result in stable ORR activities with a high half-wave potential of 0.84 V. The study proposes a feasible strategy for the fabrication of nonprecious catalysts.

Bottom-up fabrication of triazine-based frameworks as metal-free materials for supercapacitors and oxygen reduction reaction

Doping porous carbon materials with heteroatoms is an effective approach to enhance the performance in the areas of supercapacitors and the oxygen reduction reaction (ORR). However, most traditional heteroatom-doped metal-free porous carbon materials have random structures and pore distributions with high uncertainty, which is harmful for a deep understanding of supercapacitors and the ORR mechanism. Basing on the molecular design, a series of N, O co-doped porous carbon frameworks (p-PYPZs) has been prepared through the template-free trimerization of cyano groups from our designed and synthesized 2,8-bis(4-isocyanophenyl)-2,3,7,8-tetrahydropyridazino[4,5-g]phthalazine-1,4,6,9-tetraone (PYPZ) monomer and subsequent ionothermal synthesis, which has the advantage that the type, position, content of the heteroatom and the pore structure in the porous carbon material can be regulated. Nitrogen and oxygen atoms introduced via covalent bond and the hierarchically porous structure endow the material with excellent cycling stability, and 110% capacitance retention after 35 000 cycles in 1 M H2SO4. A symmetric supercapacitor was assembled with the material and shows an energy density of 32 W h kg-1. The material can be applied to the area of oxygen reduction reaction as a metal-free catalyst with an onset potential of 0.85 V versus RHE, indicating the good catalytic ability. The material exhibits excellent methanol crossover resistance and a four-electron pathway mechanism. Results also indicate a positive correlation between the N-Q content and the selectivity of the four-electron pathway. In this paper, the electrochemical properties of materials are regulated at the molecular level, which provides a new idea for further understanding the electrochemical mechanism of energy storage devices.

Synergetic enhancement of electrochemical H2O2 detection in a nitrogen-doped carbon encapsulated FeCo alloy architecture

The development of Earth-abundant metal-based non-enzymatic electrodes with ultralow metal loadings for the efficient detection of hydrogen peroxide (H₂O₂) is highly desirable. We report here a remarkable three-dimensional nitrogen-doped porous carbon (NPC) encapsulated Earth-abundant metal architecture, i.e., NPC encapsulating FeCo alloy nanoparticles toward highly efficient electrochemical H₂O₂ detection. Specifically, an Fe_0.06Co_0.04@NPC-950 modified electrode can show excellent electrochemical performance for non-enzymatic H₂O₂ sensing in neutral media, with a wide linear range of 0.004 to 8 mM, a high sensitivity of 794 μA mA^-1 cm^-2 and a low limit of detection (LOD) of 0.13 μM, outperforming most of the reported non-noble metal electrocatalysts. Meanwhile, the fabricated Fe_0.06Co_0.04@NPC-950 modified electrode is capable of real-time monitoring of H₂O₂ in commercial orange juice, milk and serum, revealing its application potential toward the accurate detection of H₂O₂ in real-sample analysis. This electrode also has high selectivity, long-term stability and good reproducibility. Its excellent performance is correlated with the synergetic catalysis of the FeCo alloy, nitrogen-rich NPC with a large specific surface area (SSA) and the core-shell structure protecting the active sites from corrosion. This study offers an efficient pathway for developing high-performance and Earth-abundant catalysts toward electrochemical H₂O₂ detection.

KOH activation of coal-derived microporous carbons for oxygen reduction and supercapacitors

Due to the dilemma of rapid consumption of fossil fuels and environmental pollution, development of clean, efficient and renewable energy conversion and storage technology has become an urgent need. Supercapacitors and hydrogen-oxygen fuel cells as typical representatives have become the focus of scientific research, in which the electrode materials are of much importance to their improved activity. In this work, a series of porous carbons (PCs) with high specific surface areas were prepared using natural coals as carbon precursors coupled with KOH activation. The effects of the mass ratio of coal and KOH as well as different activation temperatures on the microstructures of the PCs and electrochemical properties were studied in detail. The optimal PC4 (KOH: coal = 4) possessed a high specific surface area (SSA) of 2092 m2 g-1 and a well-developed microporous structure. As the electrocatalyst, it exhibited a positive onset potential of 0.88 V (vs. reversible hydrogen electrode (RHE)) and half-wave potential of 0.78 V (vs. RHE) towards the oxygen reduction reaction (ORR) in an alkaline solution. PC4 also showed the highest specific capacitance of 128 F g-1 at a current density of 0.5 A g-1 among all the samples in this work. The relatively good performance of PC4 resulted from its well-developed microporous structure and large SSA, enabling fast mass transfer of electrolytes.

Mesoporous Ternary Nitrides of Earth-Abundant Metals as Oxygen Evolution Electrocatalyst

As sustainable energy becomes a major concern for modern society, renewable and clean energy systems need highly active, stable, and low-cost catalysts for the oxygen evolution reaction (OER). Mesoporous materials offer an attractive route for generating efficient electrocatalysts with high mass transport capabilities. Herein, we report an efficient hard templating pathway to design and synthesize three-dimensional (3-D) mesoporous ternary nickel iron nitride (Ni3FeN). The as-synthesized electrocatalyst shows good OER performance in an alkaline solution with low overpotential (259 mV) and a small Tafel slope (54 mV dec-1), giving superior performance to IrO2 and RuO2 catalysts. The highly active contact area, the hierarchical porosity, and the synergistic effect of bimetal atoms contributed to the improved electrocatalytic performance toward OER. In a practical rechargeable Zn-air battery, mesoporous Ni3FeN is also shown to deliver a lower charging voltage and longer lifetime than RuO2. This work opens up a new promising approach to synthesize active OER electrocatalysts for energy-related devices.

Cobalt Nanoparticles on Plasma-Controlled Nitrogen-Doped Carbon as High-Performance ORR Electrocatalyst for Primary Zn-Air Battery

Metal-air batteries and fuel cells have attracted much attention as powerful candidates for a renewable energy conversion system for the last few decades. However, the high cost and low durability of platinum-based catalysts used to enhance sluggish oxygen reduction reaction (ORR) at air electrodes prevents its wide application to industry. In this work, we applied a plasma process to synthesize cobalt nanoparticles catalysts on nitrogen-doped carbon support with controllable quaternary-N and amino-N structure. In the electrochemical test, the quaternary-N and amino-N-doped carbon (Q-A)/Co catalyst with dominant quaternary-N and amino-N showed the best onset potential (0.87 V vs. RHE) and highest limiting current density (-6.39 mA/cm2). Moreover, Q-A/Co was employed as the air catalyst of a primary zinc-air battery with comparable peak power density to a commercial 20 wt.% Pt/C catalyst with the same loading, as well as a stable galvanostatic discharge at -20 mA/cm2 for over 30,000 s. With this result, we proposed the synergetic effect of transitional metal nanoparticles with controllable nitrogen-bonding can improve the catalytic activity of the catalyst, which provides a new strategy to develop a Pt-free ORR electrocatalyst.

A facile synthesis of Ru/N–C as an efficient and cost-effective electrocatalyst for hydrogen evolution

This work provides a HER catalyst synthesis strategy with performance comparable to commercial Pt/C at a cost of only 0.6%.