Recent Advances of Transition Metal Basic Salts for Electrocatalytic Oxygen Evolution Reaction and Overall Water Electrolysis

Polyoxometalate superlattices derived bimetallic sulfides to accelerate acidic and alkaline hydrogen evolution reaction

Over the years, polyoxometalates (POMs) have been advocated as one of the most promising classes of molecular preassembly platform for the fabrication of highly efficient metal sulfide electrocatalysts. However, designing POMs-derived metal sulfides with high intrinsic activity, good site accessibility and structural stability for both acidic and alkaline hydrogen evolution reaction (HER) remains a great challenge because of the self-aggregation and random distribution of traditional POM precursors. Herein, we have designed a bimetallic sulfide eventually encapsulated by C3N4 walls (CoMoS@CN) for efficient HER based on a simple hydrothermal and subsequent high-temperature vulcanization using the well-designed POM superlattice assembly as precursor. The organized superlattice structure with long-range ordered arrangements of POM units provide chance to prevent the agglomeration of metal sites. The in-situ formed exterior C3N4 protective wall can accelerate the electron transfer and protect catalyst from chemical corrosion in different electrolyte. The merits combining with a large specific surface area enable CoMoS@CN with remarked HER performance of low overpotentials of 164 and 95 mV at 10 mA cm-2 in acidic and alkaline conditions. Such results are better than that of p-CoMoS@CN synthesized by pyrolysis of the corresponding physical mixtures and other comparative single metal sulfides.

Controlled reconstruction of metal-organic frameworks via coordination environment tuning as oxygen evolution electrocatalysts

During the oxygen evolution reaction (OER), metal-organic framework (MOF) catalysts undergo structural reorganization, a phenomenon that is still not fully comprehended. Additionally, designing MOFs that undergo structural reconstruction to produce highly active OER catalysts continues to pose significant challenges. Herein, a bimetallic MOF (CoNi-MOF) with carboxylate oxygen and pyridine nitrogen coordination has been synthesized and its reconstruction behavior has been analyzed. The CoNi-MOF electrocatalyst attains a current density of 10 mA cm-2 with a minimal overpotential of just 250 mV, along with a Tafel slope of 91.57 mV dec-1, which is relatively low. After undergoing CV cycling tests, changes were observed in its catalytic activity, as well as in the microstructure and electrochemically active surface area, which are related to its activity. Importantly, in situ Raman analysis indicates that during the electrocatalytic process, the MOFs undergo a transition to MOOH, signifying the occurrence of reconstruction. Notably, compared to monometallic MOFs, bimetallic MOFs undergo reconstruction at lower voltage and with a faster reconstruction rate. Further analysis has revealed that the electrochemical reconstruction rate of the Co-N/O coordination mode at the active center is higher than that of Ni-N/O, playing a crucial role in enhancing OER activity. This study underscores the significance of the reconstruction strategy in enhancing the activity of MOF catalysts, providing new insights for the development of high-activity materials.

Mesoporous Co-MoS2 with sulfur vacancies: A bifunctional electrocatalyst for enhanced water-splitting reactions in alkaline media

As a graphene-like layered material, molybdenum disulfide (MoS2), has attracted increasing attentions for its promising application in electrocatalysis. Whereas MoS2 still suffers from the sluggish reaction kinetics in oxygen evolution reaction (OER) due to the low density of active sites in most exposed planes. In this work, high density of active sites on MoS2 basal planes has been obtained by synthesizing mesoporous MoS2 with Co doping and sulfur vacancies (VS). The synergy of the mesoporous structure, Co doping, and sulfur vacancies resulted in optimized bifunctional electrocatalytic activity for both hydrogen evolution reaction (HER) and OER in alkaline media. The overpotential required to achieve a current density of 10 mA cm-2 (denoted as η10) is 34 mV for HER and 268 mV for OER, respectively. The two-electrode electrolyzer constructed with the as-prepared cobalt-doped mesoporous MoS2 electrodes exhibited a low bias (η10 = 1.58 V) for overall water splitting. Density functional theory (DFT) calculations confirm the significance of Co doping and the S vacancy defects, which lowers the Gibbs free energy (ΔG) for the formation of the corresponding intermediates.

Ni/Fe Fluorides (Hydroxide) Nanocomposite as Efficient OER Catalyst

The synthesis of efficient oxygen evolution reaction (OER) catalysts that markedly reduce the overpotential over an extended period is crucial for electrolytic water splitting toward hydrogen production. A kind of Ni/Fe fluoride (hydroxide) nanocomposite OER catalyst is designed and prepared by a two-step method for the first time. The nanocomposite with the optimal OER performance (Ni : Fe precursor ratio of 9 : 1) is observed to possess a nanoparticle morphology with size of about 100 nm. Each nanoparticle hosts extensive nanoregions of Ni4OHF7, NiFeF5 ⋅ 2H2O and Fe1.9F4.75 ⋅ 0.95H2O phases. The optimal nanocomposite (Ni : Fe precursor ratio of 9 : 1) exhibits OER overpotential of merely 208 mV and 349 mV at 10 mA cm-2 and 100 mA cm-2 respectively, tafel slope of 53.1, and outstanding stability for 10 h duration at 100 mA cm-2. The superior OER catalytic performance of the optimal nanocomposite after CV activation is mainly ascribed to the comprehensive catalytic effect of multiple Ni, Fe active sites from three phases, the smaller charge transfer resistance achieved at this particular Ni : Fe precursor ratio. The abundant resources of Ni, Fe, F elements and the superior OER properties of the Ni/Fe fluorides (hydroxide) nanocomposite, make it a good OER catalyst candidate for electrolytic water splitting toward hydrogen production.

CoFe Hydroxide Nanospheres for Enhanced Alkaline Water Splitting and Seawater Oxidation:Anion Doping Effects of Fluorine and Carbonate

Green hydrogen production can be achieved through electrolysis of fresh water or the use of renewable energy to electrolyze seawater. However, due to the low activity and poor stability of oxygen evolution reaction catalysts, direct electrolysis of alkaline seawater faces significant challenges. Herein, The catalyst F-CoFe(OH)-CO3/NF with three-dimensional nanosphere structure was prepared, The introduction of CO3 2- into the intermediate layer of CoFe hydroxide improves the corrosion resistance of alkaline electrolyte and the doping of F- is to design three-dimensional layered nanostructures, increase the active site, and accelerate the diffusion of the electrolyte. By in situ Raman analysis, partial oxidation of CoFe hydroxide to CoFe (oxy)hydroxide as the active center can accelerating the adsorption of oxygen-related intermediates. In 1 M KOH, it requires overpotentials of 210 mV and 251 mV to drive current densities of 10 and 100 mA cm-2, respectively. And it remained stable at the current density of 100 mA cm-2 for 120 h in 1 M KOH. F-CoFe(OH)-CO3/NF can also catalyzes the decomposition of electrolytic seawater. Compared with hydroxide, anion-doped carbonate hydroxide is more efficient and stable in electrolyte solution, which is of great importance for the development of a new stable electrocatalyst for water decomposition.

Noble Metal Phosphides: Robust Electrocatalysts toward Hydrogen Evolution Reaction

Facing with serious carbon emission issues, the production of green H2 from electrocatalytic hydrogen evolution reaction (HER) has received extensive research interest. Almost all kinds of noble metal phosphides (NMPs) consisting of Pt-group elements (i.e., Ru, Rh, Pd, Os, Ir and Pt) are all highly active and pH-universal electrocatalysts toward HER. In this review, the recent progress of NMP-based HER electrocatalysts is summarized. It is further take typical examples for discussing important impact factors on the HER performance of NMPs, including crystalline phase, morphology, noble metal element and doping. Moreover, the synthesis and HER application of hybrid catalysts consisting of NMPs and other materials such as transition metal phosphides, oxides, sulfides and phosphates, carbon materials and noble metals is also reviewed. Reducing the use of noble metal is the key idea for NMP-based hybrid electrocatalysts, while the expanded functionality and structure-performance relationship are also noticed in this part. At last, the potential opportunities and challenges for this kind of highly active catalyst is discussed.

Rational Design Strategy for High-Valence Metal-Driven Electronically Modulated High-Entropy Co-Ni-Fe-Cu-Mo (Oxy)Hydroxide as Superior Multifunctional Electrocatalysts

Creating durable and efficient multifunctional electrocatalysts capable of high current densities at low applied potentials is crucial for widespread industrial use in hydrogen production. Herein, a Co-Ni-Fe-Cu-Mo (oxy)hydroxide electrocatalyst with abundant grain boundaries on nickel foam using a scalable coating method followed by chemical precipitation is synthesized. This technique efficiently organizes hierarchical Co-Ni-Fe-Cu-Mo (oxy)hydroxide nanoparticles within ultrafine crystalline regions (<4 nm), enriched with numerous grain boundaries, enhancing catalytic site density and facilitating charge and mass transfer. The resulting catalyst, structured into nanosheets enriched with grain boundaries, exhibits superior electrocatalytic activity. It achieves a reduced overpotential of 199 mV at 10 mA cm2 current density with a Tafel slope of 48.8 mV dec1 in a 1 m KOH solution, maintaining stability over 72 h. Advanced analytical techniques reveal that incorporating high-valency copper and molybdenum elements significantly enhances lattice oxygen activation, attributed to weakened metal-oxygen bonds facilitating the lattice oxygen mechanism (LOM). Synchrotron radiation studies confirm a synergistic interaction among constituent elements. Furthermore, the developed high-entropy electrode demonstrates exceptional long-term stability under high current density in alkaline environments, showcasing the effectiveness of high-entropy strategies in advancing electrocatalytic materials for energy-related applications.

Boosting Oxygen Evolution Reaction Performance on NiFe-Based Catalysts Through d-Orbital Hybridization

Anion-exchange membrane water electrolyzers (AEMWEs) for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts. By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units, the d-orbital and electronic structures can be adjusted, which is an important strategy to achieve sufficient oxygen evolution reaction (OER) performance in AEMWEs. Herein, the ternary NiFeM (M: La, Mo) catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work. Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen, resulting in enhanced adsorption strength of oxygen intermediates, and reduced rate-determining step energy barrier, which is responsible for the enhanced OER performance. More critically, the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm-2 in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.

Bimetallic Single-Atom Catalysts for Water Splitting

Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society. The field of catalysis has been revolutionized by single-atom catalysts (SACs), which exhibit unique and intricate interactions between atomically dispersed metal atoms and their supports. Recently, bimetallic SACs (bimSACs) have garnered significant attention for leveraging the synergistic functions of two metal ions coordinated on appropriately designed supports. BimSACs offer an avenue for rich metal-metal and metal-support cooperativity, potentially addressing current limitations of SACs in effectively furnishing transformations which involve synchronous proton-electron exchanges, substrate activation with reversible redox cycles, simultaneous multi-electron transfer, regulation of spin states, tuning of electronic properties, and cyclic transition states with low activation energies. This review aims to encapsulate the growing advancements in bimSACs, with an emphasis on their pivotal role in hydrogen generation via water splitting. We subsequently delve into advanced experimental methodologies for the elaborate characterization of SACs, elucidate their electronic properties, and discuss their local coordination environment. Overall, we present comprehensive discussion on the deployment of bimSACs in both hydrogen evolution reaction and oxygen evolution reaction, the two half-reactions of the water electrolysis process.

Mechanistic insights into C-C coupling in electrocatalytic CO2 reduction reaction

The utilization of CO2 has become an emerging area of research in response to climate change and global warming. The electrochemical CO2 reduction reaction (CO2RR) holds significant promise as a technology to address this issue by converting CO2 molecules into various commercially valuable chemicals. While CO2RR to C1 hydrocarbons has achieved high activity and selectivity, the C-C coupling to produce higher hydrocarbons remains challenging due to low energy efficiency and the prevalent hydrogen evolution reaction (HER) on the same catalyst, leading to high hydrogenation rates. In this review, we aim to elucidate the fundamental challenges of C-C coupling and explore potential strategies to enhance the selectivity for higher hydrocarbon products. We discuss the mechanisms underlying the formation of C2 and C3 products, focusing on molecular catalysts that facilitate C-C coupling by positioning CO2 molecules in close proximity. Additionally, we provide a comprehensive overview of different approaches to improve higher hydrocarbon selectivity, along with future suggestions and recommendations for new researchers in the field. This review serves as a valuable resource for both academic researchers and industrial stakeholders aiming for the commercialization of CO2RR technologies.

In Situ Electrochemical Rapid Induction of Highly Active γ-NiOOH Species for Industrial Anion Exchange Membrane Water Electrolyzer

Limited by the strong oxidation environment and sluggish reconstruction process in oxygen evolution reaction (OER), designing rapid self-reconstruction with high activity and stability electrocatalysts is crucial to promoting anion exchange membrane (AEM) water electrolyzer. Herein, trace Fe/S-modified Ni oxyhydroxide (Fe/S-NiOOH/NF) nanowires are constructed via a simple in situ electrochemical oxidation strategy based on precipitation-dissolution equilibrium. In situ characterization techniques reveal that the successful introduction of Fe and S leads to lattice disorder and boosts favorable hydroxyl capture, accelerating the formation of highly active γ-NiOOH. The Density Functional Theory (DFT) calculations have also verified that the incorporation of Fe and S optimizes the electrons redistribution and the d-band center, decreasing the energy barrier of the rate-determining step (*O→*OOH). Benefited from the unique electronic structure and intermediate adsorption, the Fe/S-NiOOH/NF catalyst only requires the overpotential of 345 mV to reach the industrial current density of 1000 mA cm-2 for 120 h. Meanwhile, assembled AEM water electrolyzer (Fe/S-NiOOH//Pt/C-60 °C) can deliver 1000 mA cm-2 at a cell voltage of 2.24 V, operating at the average energy efficiency of 71% for 100 h. In summary, this work presents a rapid self-reconstruction strategy for high-performance AEM electrocatalysts for future hydrogen economy.

Defect Engineering and Carbon Supporting to Achieve Ni-Doped CoP3 with High Catalytic Activities for Overall Water Splitting

This work reports the use of defect engineering and carbon supporting to achieve metal-doped phosphides with high activities and stabilities for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in alkaline media. Specifically, the nitrogen-doped carbon nanofiber-supported Ni-doped CoP3 with rich P defects (Pv·) on the carbon cloth (p-NiCoP/NCFs@CC) is synthesized through a plasma-assisted phosphorization method. The p-NiCoP/NCFs@CC is an efficient and stable catalyst for the HER and the OER. It only needs overpotentials of 107 and 306 mV to drive 100 mA cm-2 for the HER and the OER, respectively. Its catalytic activities are higher than those of other catalysts reported recently. The high activities of the p-NiCoP/NCFs@CC mainly arise from its peculiar structural features. The density functional theory calculation indicates that the Pv· richness, the Ni doping, and the carbon supporting can optimize the adsorption of the H atoms at the catalyst surface and promote the strong electronic couplings between the carbon nanofiber-supported p-NiCoP with the surface oxide layer formed during the OER process. This gives the p-NiCoP/NCFs@CC with the high activities for the HER and the OER. When used in alkaline water electrolyzers, the p-NiCoP/NCFs@CC shows the superior activity and excellent stability for overall water splitting.

Next-Generation Green Hydrogen: Progress and Perspective from Electricity, Catalyst to Electrolyte in Electrocatalytic Water Splitting

Green hydrogen from electrolysis of water has attracted widespread attention as a renewable power source. Among several hydrogen production methods, it has become the most promising technology. However, there is no large-scale renewable hydrogen production system currently that can compete with conventional fossil fuel hydrogen production. Renewable energy electrocatalytic water splitting is an ideal production technology with environmental cleanliness protection and good hydrogen purity, which meet the requirements of future development. This review summarizes and introduces the current status of hydrogen production by water splitting from three aspects: electricity, catalyst and electrolyte. In particular, the present situation and the latest progress of the key sources of power, catalytic materials and electrolyzers for electrocatalytic water splitting are introduced. Finally, the problems of hydrogen generation from electrolytic water splitting and directions of next-generation green hydrogen in the future are discussed and outlooked. It is expected that this review will have an important impact on the field of hydrogen production from water.

First-row transition metal carbonates catalyze the electrochemical oxygen evolution reaction: iron is master of them all

In pursuing green hydrogen fuel, electrochemical water-splitting emerges as the optimal method. A critical challenge in advancing this process is identifying a cost-effective electrocatalyst for oxygen evolution on the anode. Recent research has demonstrated the efficacy of first-row transition metal carbonates as catalysts for various oxidation reactions. In this study, Earth-abundant first-row transition metal carbonates were electrodeposited onto nickel foam (NF) electrodes and evaluated for their performance in the oxygen evolution reaction. The investigation compares the activity of these carbonates on NF electrodes against bare NF electrodes. Notably, Fe2(CO3)3/NF exhibited superior oxygen evolution activity, characterized by low overpotential values, i.e. Iron is master of them all (R. Kipling, Cold Iron, Rewards and Fairies, Macmillan and Co. Ltd., 1910). Comprehensive catalytic stability and durability tests also indicate that these transition metal carbonates maintain stable activity, positioning them as durable and efficient electrocatalysts for the oxygen evolution reaction.

In Situ Raman Study of Surface Reconstruction of FeOOH/Ni3S2 Oxygen Evolution Reaction Electrocatalysts

Construction of heterojunctions is an effective strategy to enhanced electrocatalytic oxygen evolution reaction (OER), but the structural evolution of the active phases and synergistic mechanism still lack in-depth understanding. Here, an FeOOH/Ni3S2 heterostructure supported on nickel foam (NF) through a two-step hydrothermal-chemical etching method is reported. In situ Raman spectroscopy study of the surface reconstruction behaviors of FeOOH/Ni3S2/NF indicates that Ni3S2 can be rapidly converted to NiOOH, accompanied by the phase transition from α-FeOOH to β-FeOOH during the OER process. Importantly, a deep analysis of Ni─O bond reveals that the phase transition of FeOOH can regulate the lattice disorder of NiOOH for improved catalytic activity. Density functional theory (DFT) calculations further confirm that NiOOH/FeOOH heterostructure possess strengthened adsorption for O-containing intermediates, as well as lower energy barrier toward the OER. As a result, FeOOH/Ni3S2/NF exhibits promising OER activity and stability in alkaline conditions, requiring an overpotential of 268 mV @ 100 mA cm-2 and long-term stability over 200 h at a current density of 200 mA cm-2. This work provides a new perspective for understanding the synergistic mechanism of heterogeneous electrocatalysts during the OER process.

Tuning the Electronic Property of Reconstructed Atomic Ni-CuO Cluster Supported on N/O-C for Electrocatalytic Oxygen Evolution

Electrochemical activation usually accompanies in situ atom rearrangement forming new catalytic sites with higher activity due to reconstructed atomic clusters or amorphous phases with abundant dangling bonds, vacancies, and defects. By harnessing the pre-catalytic process of reconstruction, a multilevel structure of CuNi alloy nanoparticles encapsulated in N-doped carbon (CuNi nanoalloy@N/C) transforms into a highly active compound of Ni-doped CuO nanocluster supported on (N/O-C) co-doped C. Both the exposure of accessible active sites and the activity of individual active sites are greatly improved after the pre-catalytic reconstruction. Manipulating the Cu/Ni ratios of CuNi nanoalloy@N/C can tailor the electronic property and d-band center of the high-active compound, which greatly optimizes the energetics of oxygen evolution reaction (OER) intermediates. This interplay among Cu, Ni, C, N, and O modifies the interface, triggers the active sites, and regulates the work functions, thereby realizing a synergistic boost in OER.

Amorphous Iridium Oxide-Integrated Anode Electrodes with Ultrahigh Material Utilization for Hydrogen Production at Industrial Current Densities

Herein, ionomer-free amorphous iridium oxide (IrOx) thin electrodes are first developed as highly active anodes for proton exchange membrane electrolyzer cells (PEMECs) via low-cost, environmentally friendly, and easily scalable electrodeposition at room temperature. Combined with a Nafion 117 membrane, the IrOx-integrated electrode with an ultralow loading of 0.075 mg cm-2 delivers a high cell efficiency of about 90%, achieving more than 96% catalyst savings and 42-fold higher catalyst utilization compared to commercial catalyst-coated membrane (2 mg cm-2). Additionally, the IrOx electrode demonstrates superior performance, higher catalyst utilization and significantly simplified fabrication with easy scalability compared with the most previously reported anodes. Notably, the remarkable performance could be mainly due to the amorphous phase property, sufficient Ir3+ content, and rich surface hydroxide groups in catalysts. Overall, due to the high activity, high cell efficiency, an economical, greatly simplified and easily scalable fabrication process, and ultrahigh material utilization, the IrOx electrode shows great potential to be applied in industry and accelerates the commercialization of PEMECs and renewable energy evolution.

Transition metal-based electrocatalysts for alkaline overall water splitting: advancements, challenges, and perspectives

Water electrolysis is a promising method for efficiently producing hydrogen and oxygen, crucial for renewable energy conversion and fuel cell technologies. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are two key electrocatalytic reactions occurring during water splitting, necessitating the development of active, stable, and low-cost electrocatalysts. Transition metal (TM)-based electrocatalysts, spanning noble metals and TM oxides, phosphides, nitrides, carbides, borides, chalcogenides, and dichalcogenides, have garnered significant attention due to their outstanding characteristics, including high electronic conductivity, tunable valence electron configuration, high stability, and cost-effectiveness. This timely review discusses developments in TM-based electrocatalysts for the HER and OER in alkaline media in the last 10 years, revealing that the exposure of more accessible surface-active sites, specific electronic effects, and string effects are essential for the development of efficient electrocatalysts towards electrochemical water splitting application. This comprehensive review serves as a guide for designing and constructing state-of-the-art, high-performance bifunctional electrocatalysts based on TMs, particularly for applications in water splitting.

Durable Ru Nanocrystal with HfO2 Modification for Acidic Overall Water Splitting

Durable and efficient bi-functional catalyst, that is capable of both oxygen evolution reaction and hydrogen evolution reaction under acidic condition, are highly desired for the commercialization of proton exchange membrane water electrolysis. Herein, we report a robust L-Ru/HfO2 heterostructure constructed via confining crystalline Ru nanodomains by HfO2 matrix. When assembled with a proton exchange membrane, the bi-functional L-Ru/HfO2 catalyst-based electrolyzer presents a voltage of 1.57 and 1.67 V to reach 100 and 300 mA cm-2 current density, prevailing most of previously reported Ru-based materials as well as commercial Pt/C||RuO2 electrolyzer. It is revealed that the synergistic effect of HfO2 modification and small crystalline domain formation significantly alleviates the over-oxidation of Ru. More importantly, this synergistic effect facilitates a dual-site oxide path during the oxygen evolution procedure via optimization of the binding configurations of oxygenated adsorbates. As a result, the Ru active sites maintain the metallic state along with reduced energy barrier for the rate-determining step (*O→*OOH). Both of water adsorption and dissociation (Volmer step) are strengthened, while a moderate hydrogen binding is achieved to accelerate the hydrogen desorption procedure (Tafel step). Consequently, the activity and stability of acidic overall water splitting are simultaneously enhanced.

Rational Design of Cost-Effective Metal-Doped ZrO2 for Oxygen Evolution Reaction

The design of cost-effective electrocatalysts is an open challenging for oxygen evolution reaction (OER) due to the "stable-or-active" dilemma. Zirconium dioxide (ZrO2), a versatile and low-cost material that can be stable under OER operating conditions, exhibits inherently poor OER activity from experimental observations. Herein, we doped a series of metal elements to regulate the ZrO2 catalytic activity in OER via spin-polarized density functional theory calculations with van der Waals interactions. Microkinetic modeling as a function of the OER activity descriptor (GO*-GHO*) displays that 16 metal dopants enable to enhance OER activities over a thermodynamically stable ZrO2 surface, among which Fe and Rh (in the form of single-atom dopant) reach the volcano peak (i.e. the optimal activity of OER under the potential of interest), indicating excellent OER performance. Free energy diagram calculations, density of states, and ab initio molecular dynamics simulations further showed that Fe and Rh are the effective dopants for ZrO2, leading to low OER overpotential, high conductivity, and good stability. Considering cost-effectiveness, single-atom Fe doped ZrO2 emerged as the most promising catalyst for OER. This finding offers a valuable perspective and reference for experimental researchers to design cost-effective catalysts for the industrial-scale OER production.

Current Status and Perspectives of Dual-Atom Catalysts Towards Sustainable Energy Utilization

The exploration of sustainable energy utilization requires the implementation of advanced electrochemical devices for efficient energy conversion and storage, which are enabled by the usage of cost-effective, high-performance electrocatalysts. Currently, heterogeneous atomically dispersed catalysts are considered as potential candidates for a wide range of applications. Compared to conventional catalysts, atomically dispersed metal atoms in carbon-based catalysts have more unsaturated coordination sites, quantum size effect, and strong metal-support interactions, resulting in exceptional catalytic activity. Of these, dual-atomic catalysts (DACs) have attracted extensive attention due to the additional synergistic effect between two adjacent metal atoms. DACs have the advantages of full active site exposure, high selectivity, theoretical 100% atom utilization, and the ability to break the scaling relationship of adsorption free energy on active sites. In this review, we summarize recent research advancement of DACs, which includes (1) the comprehensive understanding of the synergy between atomic pairs; (2) the synthesis of DACs; (3) characterization methods, especially aberration-corrected scanning transmission electron microscopy and synchrotron spectroscopy; and (4) electrochemical energy-related applications. The last part focuses on great potential for the electrochemical catalysis of energy-related small molecules, such as oxygen reduction reaction, CO2 reduction reaction, hydrogen evolution reaction, and N2 reduction reaction. The future research challenges and opportunities are also raised in prospective section.

Noble Metal Phosphides Supported on CoNi Metaphosphate for Efficient Overall Water Splitting

Transition metal metaphosphates and noble metal phosphides prepared under similar conditions are potential hybrid catalysts for electrocatalytic water splitting, which is of great significance for H2 production. Herein, the structure and electrocatalytic activity of different noble metal species (i.e., Rh, Pd, Ir) on CoNiP4O12 nanoarrays have been systematically studied. Due to the different formation energies of noble metal phosphides, the phosphides of Rh (RhPx) and Pd (PdPx) as well as the noble metal Ir are obtained under the same phosphorylation conditions perspectively. RhPx/CoNiP4O12 and PdPx/CoNiP4O12 exhibit much better HER activity than Ir/CoNiP4O12 due to the advantages of phosphides. Density functional theory (DFT) calculations reveal that the extraordinary activity of RhPx/CoNiP4O12 originated from the strong affinity to H2O and optimal adsorption for H*. The best RhPx/CoNiP4O12 only requires a low overpotential of 30 and 234 mV to deliver 10 mA cm-2 for HER and OER, respectively, and therefore is effective for overall water splitting (requiring 1.57 V to achieve a current density of 10 mA cm-2). This work not only develops a novel RhPx/CoNiP4O12 electrocatalyst for overall water splitting but also provides deep insight into the formation mechanism of noble metal phosphides.

Recent progress in hierarchical nanostructures for Ni-based industrial-level OER catalysts

Exploring efficient and low-cost oxygen evolution reaction (OER) electrocatalysts reaching the industrial level current density is crucial for hydrogen production via water electrolysis. In this feature article, we summarize the recent progress in hierarchical nanostructures for the industrial-level OER. The contents mainly concern (i) the design of a hierarchical structure; (ii) a Ni-based hierarchical structure for the industrial current density OER; and (iii) the surface reconstruction of the hierarchical structure during the OER process. The work provides valuable guidance and insights for the manufacture of hierarchical nanomaterials and devices for industrial applications.

Achieving High-Performance Electrocatalytic Water Oxidation on Ni(OH)2 with Optimized Intermediate Binding Energy Enabled by S-Doping and CeO2 -Interfacing

The adsorption energy of the reaction intermediates has a crucial influence on the electrocatalytic activity. Ni-based materials possess high oxygen evolution reaction (OER) performance in alkaline, however too strong binding of *OH and high energy barrier of the rate-determining step (RDS) severely limit their OER activity. Herein, a facile strategy is shown to fabricate novel vertical nanorod-like arrays hybrid structure with the interface contact of S-doped Ni(OH)2 and CeO2 in situ grown on Ni foam (S-Ni(OH)2 /CeO2 /NF) through a one-pot route. The alcohol molecules oxidation reaction experiments and theoretical calculations demonstrate that S-doping and CeO2 -interfacing significantly modulate the binding energies of OER intermediates toward optimal value and reduce the energy barrier of the RDS, contributing to remarkable OER activity for S-Ni(OH)2 /CeO2 /NF with an ultralow overpotential of 196 mV at 10 mA cm-2 and long-term durability over 150 h for the OER. This work offers an efficient doping and interfacing strategy to tune the binding energy of the OER intermediates for obtaining high-performance electrocatalysts.

Sulfur Vacancy-Engineered Co3S4/MoS2-Interfaced Nanosheet Array for Enhanced Alkaline Overall Water Splitting

Electrochemical water splitting, a crucial reaction for renewable energy storage, demands highly efficient and stable catalysts. Defect and interface engineering has been widely acknowledged to play a pivotal role in improving electrocatalytic performance. Herein, we demonstrate a facile strategy to construct sulfur vacancy (Sv)-engineered Co3S4/MoS2-interfaced nanosheet arrays to modulate the interface electronic structure in situ reduction with NaBH4. The abundant sulfur vacancies and well-arranged nanosheet arrays in Sv-Co3S4/MoS2 lead to pronounced electrocatalytic properties for hydrogen and oxygen evolution reactions (HER/OER) in an alkaline medium, with observed overpotentials of 156 and 209 mV at 10 mA cm-2, respectively. Additionally, as a bifunctional electrocatalyst, Sv-Co3S4/MoS2 requires a cell voltage of 1.67 V at 10 mA cm-2 for overall water splitting and exhibits long-term stability with activity sustained for more than 20 h. This study provides a novel approach to producing transition metal compound-interfaced electrocatalysts with rich vacancies under mild conditions, showcasing their potential for efficient water splitting applications.

Exploring the Cation Regulation Mechanism for Interfacial Water Involved in the Hydrogen Evolution Reaction by In Situ Raman Spectroscopy

Interfacial water molecules are the most important participants in the hydrogen evolution reaction (HER). Hence, understanding the behavior and role that interfacial water plays will ultimately reveal the HER mechanism. Unfortunately, investigating interfacial water is extremely challenging owing to the interference caused by bulk water molecules and complexity of the interfacial environment. Here, the behaviors of interfacial water in different cationic electrolytes on Pd surfaces were investigated by the electrochemistry, in situ core-shell nanostructure enhanced Raman spectroscopy and theoretical simulation techniques. Direct spectral evidence reveals a red shift in the frequency and a decrease in the intensity of interfacial water as the potential is shifted in the positively direction. When comparing the different cation electrolyte systems at a given potential, the frequency of the interfacial water peak increases in the specified order: Li+  < Na+  < K+  < Ca2+  < Sr2+. The structure of interfacial water was optimized by adjusting the radius, valence, and concentration of cation to form the two-H down structure. This unique interfacial water structure will improve the charge transfer efficiency between the water and electrode further enhancing the HER performance. Therefore, local cation tuning strategies can be used to improve the HER performance by optimizing the interfacial water structure.

Modulating adsorption energy on nickel nitride-supported ruthenium nanoparticles through in-situ electrochemical activation for urea-assisted alkaline hydrogen production

The rational design of electrocatalysts with exceptional performance and durability for hydrogen production in alkaline medium is a formidable challenge. In this study, we have developed in-situ activated ruthenium nanoparticles dispersed on Ni3N nanosheets, forming a bifunctional electrocatalyst for hydrogen evolution and urea oxidation. The results of experimental analysis and theoretical calculations reveal that the enhanced hydrogen evolution reaction (HER) performance of O-Ru-Ni3N stems primarily from the optimized hydrogen adsorption and hydroxyl adsorption on Ru sites. The O-Ru-Ni3N on nickel foam (NF) electrode exhibits excellent HER performance, requiring only 29 mV to reach 10 mA cm-2 in an alkaline medium. Notably, when this O-Ru-Ni3N/NF catalyst is employed for both HER and urea oxidation reaction (UOR) to create an integrated H2 production system, a current density of 50 mA cm-2 can be generated at the cell voltage of 1.41 V. This report introduces an energy-efficient catalyst for hydrogen production and proposes a viable strategy for anodic activation in energy chemistry.

Design of iron oxyhydroxide nanosheets coated on Co species embedded in nanoporous carbon for oxygen evolution reaction

There is still a tremendous challenge in designing environmentally friendly oxygen evolution reaction (OER) catalysts that are inexpensive and high-performing for practical applications. Herein, the self-sacrificing template zeolitic imidazolate framework-67 (ZIF-67) was pyrolyzed under N2 atmosphere to generate Co species embedded in nanoporous carbon (Co-NC). Then, iron oxyhydroxide (FeOOH) was wrapped onto the Co-NC surface via electrodeposition to shape the Co-NC@FeOOH composites. Benefiting from the core-shell structure, high conductivity, and distributed active sites, Co-NC@FeOOH presents distinguished OER performance with a low overpotential (336 mV) at 10 mA cm-2 and small Tafel slope (49.46 mV dec-1). This work furnishes a rosy passage for receiving cost-effective electrocatalysts with high efficiency for OER.

Internal Polarization Field Induced Hydroxyl Spillover Effect for Industrial Water Splitting Electrolyzers

The formation of multiple oxygen intermediates supporting efficient oxygen evolution reaction (OER) are affinitive with hydroxyl adsorption. However, ability of the catalyst to capture hydroxyl and maintain the continuous supply at active sits remains a tremendous challenge. Herein, an affordable Ni2P/FeP2 heterostructure is presented to form the internal polarization field (IPF), arising hydroxyl spillover (HOSo) during OER. Facilitated by IPF, the oriented HOSo from FeP2 to Ni2P can activate the Ni site with a new hydroxyl transmission channel and build the optimized reaction path of oxygen intermediates for lower adsorption energy, boosting the OER activity (242 mV vs. RHE at 100 mA cm-2) for least 100 h. More interestingly, for the anion exchange membrane water electrolyzer (AEMWE) with low concentration electrolyte, the advantage of HOSo effect is significantly amplified, delivering 1 A cm-2 at a low cell voltage of 1.88 V with excellent stability for over 50 h.

Lattice tensile strain cobalt phosphate with modulated hydroxide adsorption and structure transformation towards improved oxygen evolution reaction

The adsorption energy of oxygen-containing intermediates for the oxygen evolution reaction (OER) electrocatalysts plays a key role on their electrocatalytic performances. Rational optimization and regulation of the binding energy of intermediates can effectively improve the catalytic activities. Herein, the binding strength of Co phosphate to *OH was weakened by generating lattice tensile strain via Mn replacement, which modulated the electronic structure and optimized the reactive intermediates adsorption with active sites. The tensile-strained lattice structure and stretched interatomic distance were confirmed by X-ray diffraction and extended X-ray absorption fine structure (EXAFS) spectra measurements. The as-obtained Mn-doped Co phosphate exhibits excellent OER activity with an overpotential of 335 mV at 10 mA cm-2, which is much higher than pristine Co phosphate. In-situ Raman spectra and methanol oxidation reaction experiments demonstrated that Mn-doped Co phosphate with lattice tensile strain shows optimized *OH adsorption strength, and is favorable to structure reconstruction and form highly active Co oxyhydroxide intermediate during OER process. Our work provides insight into the effects of the lattice strain on the OER activity from the standpoint of intermediate adsorption and structure transformation.

Symmetry or asymmetry: which one is the platform of nitrogen vacancies for alkaline hydrogen evolution

Conventional nitrogen vacancies with a symmetric coordination of metal cations (i.e., M1-Nv-M1) play a crucial role in tuning the local environment of the metal sites in metal nitrides and improving their electrochemical activity in the hydrogen evolution reaction (HER). However, the symmetric Nv sites, which feature a uniform charge distribution on adjacent metal sites, suffer from sluggish water dissociation kinetics and a poor capability for hydrogen desorption. Here, we fabricated Cr-doped and Nv-rich Co4N nanorods grown on a Ni foam (Cr-Co4N-Nv/NF) with asymmetric Cr-Nv-Co sites to effectively catalyze hydrogen evolution under alkaline conditions, with a low overpotential of 33 mV at a current density of 10 mA cm-2 and a small Tafel slope of 37 mV dec-1. The experimental characterizations and theoretical simulations collectively reveal that the construction of asymmetric Cr-Nv-Co sites gives rise to the upshift of the d-band center, thus promoting water adsorption and activation. Moreover, asymmetric Nv sites allow a balance between hydrogen adsorption and desorption, which avoids the limited desorption process over the symmetric Co-Nv-Co sites.

Amazing enhancement of OER performances: creating a well-designed functional Ni and N-doped carbon layer as a support material for fabricating a NiFe-LDH electrocatalyst

A well-designed support material between catalyst and substrate can always significantly enhance the performance of an electrode on water oxidation. In this work, a functional Ni and N-doped carbon layer (NNC) was designed on carbon paper (CP) via pyrolysis by using a controlled electrodeposited polyporphyrin as a precursor. Consequently, the fabricated NiFe-LDH/NNC/CP achieved a catalytic current density of 100 mA cm-2 at a small overpotential of 231 mV with a low Tafel slope of 26.0 mV dec-1, as well as high durability for more than 360 h. The insights are that N-doping reinforces the hydrophilicity and the catalyst binding capacity, while Ni-doping intensifies the conductivity.

Synergistically Regulating the Electronic Structure of CoS by Cation and Anion Dual-Doping for Efficient Overall Water Splitting

Precisely regulating the electronic construction of the reactive center is an essential method to improve the electrocatalysis, but achieving efficient multifunctional characteristics remains a challenge. Herein, CoS sample dual-doped by Cu and F atoms, as bifunctional electrocatalyst, is designed and synthesized for water electrolysis. According to the experimental results, Cu atom doping can perform primary electronic adjustment and obtain bifunctional properties, and then the electronic structure is adjusted for the second time to achieve an optimal state by introducing F atom. Meanwhile, this dual-doping strategy will result in lattice distortion and expose more active sites. As expected, dual-doped Cu-F-CoS show the brilliant electrocatalytic activity, revealing ultralow overpotentials (59 mV for HER, 213 mV for OER) at 10 mA cm-2 in alkaline electrolyte. Besides, it also exhibits distinguished water electrolysis activity with cell voltage as low as 1.52 V at 10 mA cm-2 . Our work can provide an atomic-level perception for adjusting the electronic construction of reactive sites by means of dual-doping engineering and put forward a contributing path for the electrocatalysts with multifunctional designing.

Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal-air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O2 to water (H2O) or from O2 to hydrogen peroxide (H2O2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.

Vertical 3D Nanostructures Boost Efficient Hydrogen Production Coupled with Glycerol Oxidation Under Alkaline Conditions

Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality. However, it is limited by the high overpotential of oxygen evolution reaction (OER) at the anode. To reduce the operating voltage of electrolyzer, herein thermodynamically favorable glycerol oxidation reaction (GOR) is proposed to replace the OER. Moreover, vertical NiO flakes and NiMoNH nanopillars are developed to boost the reaction kinetics of anodic GOR and cathodic hydrogen evolution, respectively. Meanwhile, excluding the explosion risk of mixed H2/O2, a cheap organic membrane is used to replace the expensive anion exchange membrane in the electrolyzer. Impressively, the electrolyzer delivers a remarkable reduction of operation voltage by 280 mV, and exhibits good long-term stability. This work provides a new paradigm of hydrogen production with low cost and good feasibility.

Immobilization of Oxyanions on the Reconstructed Heterostructure Evolved from a Bimetallic Oxysulfide for the Promotion of Oxygen Evolution Reaction

Efficient and durable oxygen evolution reaction (OER) requires the electrocatalyst to bear abundant active sites, optimized electronic structure as well as robust component and mechanical stability. Herein, a bimetallic lanthanum-nickel oxysulfide with rich oxygen vacancies based on the La2O2S prototype is fabricated as a binder-free precatalyst for alkaline OER. The combination of advanced in situ and ex situ characterizations with theoretical calculation uncovers the synergistic effect among La, Ni, O, and S species during OER, which assures the adsorption and stabilization of the oxyanion [Formula: see text] onto the surface of the deeply reconstructed porous heterostructure composed of confining NiOOH nanodomains by La(OH)3 barrier. Such coupling, confinement, porosity and immobilization enable notable improvement in active site accessibility, phase stability, mass diffusion capability and the intrinsic Gibbs free energy of oxygen-containing intermediates. The optimized electrocatalyst delivers exceptional alkaline OER activity and durability, outperforming most of the Ni-based benchmark OER electrocatalysts.

Synergistic Effect of Dual-Doped Carbon on Mo2C Nanocrystals Facilitates Alkaline Hydrogen Evolution

Molybdenum carbide (Mo2C) materials are promising electrocatalysts with potential applications in hydrogen evolution reaction (HER) due to low cost and Pt-like electronic structures. Nevertheless, their HER activity is usually hindered by the strong hydrogen binding energy. Moreover, the lack of water-cleaving sites makes it difficult for the catalysts to work in alkaline solutions. Here, we designed and synthesized a B and N dual-doped carbon layer that encapsulated on Mo2C nanocrystals (Mo2C@BNC) for accelerating HER under alkaline condition. The electronic interactions between the Mo2C nanocrystals and the multiple-doped carbon layer endow a near-zero H adsorption Gibbs free energy on the defective C atoms over the carbon shell. Meanwhile, the introduced B atoms afford optimal H2O adsorption sites for the water-cleaving step. Accordingly, the dual-doped Mo2C catalyst with synergistic effect of non-metal sites delivers superior HER performances of a low overpotential (99 mV@10 mA cm-2) and a small Tafel slope (58.1 mV dec-1) in 1 M KOH solution. Furthermore, it presents a remarkable activity that outperforming the commercial 10% Pt/C catalyst at large current density, demonstrating its applicability in industrial water splitting. This study provides a reasonable design strategy towards noble-metal-free HER catalysts with high activity.

Atomically Dispersed Dual-Metal Sites Showing Unique Reactivity and Dynamism for Electrocatalysis

The real structure and in situ evolution of catalysts under working conditions are of paramount importance, especially for bifunctional electrocatalysis. Here, we report asymmetric structural evolution and dynamic hydrogen-bonding promotion mechanism of an atomically dispersed electrocatalyst. Pyrolysis of Co/Ni-doped MAF-4/ZIF-8 yielded nitrogen-doped porous carbons functionalized by atomically dispersed Co-Ni dual-metal sites with an unprecedented N8V4 structure, which can serve as an efficient bifunctional electrocatalyst for overall water splitting. More importantly, the electrocatalyst showed remarkable activation behavior due to the in situ oxidation of the carbon substrate to form C-OH groups. Density functional theory calculations suggested that the flexible C-OH groups can form reversible hydrogen bonds with the oxygen evolution reaction intermediates, giving a bridge between elementary reactions to break the conventional scaling relationship.