Bio-inspired hydrogel-based bandage with robust adhesive and antibacterial abilities for skin closure

Exosome-loaded tannic acid-thioctic acid hydrogel enhances wound healing in coagulation disorders

Hemophilia poses distinct challenges to wound healing, primarily due to uncontrolled bleeding and delayed tissue repair. This study explored a novel tannic acid-thioctic acid (TATA) hydrogel, enriched with exosomes derived from bone marrow mesenchymal stem cells, as a therapeutic strategy for enhancing skin wound healing in a hemophilia model. The hydrogel exhibited robust hemostatic efficacy, potent antioxidant activity, and the capacity to modulate the inflammatory microenvironment. Both in vitro and in vivo assessments demonstrated significantly accelerated wound closure, increased collagen deposition, and pronounced angiogenesis in the TATA Hydrogel-Exosome(TATA Hydrogel-Exos) treatment group relative to controls. Rheological evaluations confirmed the self-healing properties and mechanical durability, of the hydrogel, underscoring its potential for sustained therapeutic application. Importantly, no significant systemic toxicity was observed, indicating favorable biocompatibility. These multifunctional TATA Hydrogel-Exos present a promising therapeutic avenue for hemophilia-related wounds by integrating hemostasis, inflammation regulation, and tissue regeneration.

Hydroxypropyl methylcellulose reinforced collagen/PVA composite hydrogel wound dressing with self-adaptive, hemostasis and antibacterial ability for wound healing

Nowadays, hydrogels have been extensively and increasingly applied in the field of wound dressings in terms of their high biocompatibility and adjustable functionality. Bacterial infection can serious hinder wound healing the incomplete contact between hydrogel and wound increased the risk of infection. Thus, hydrogel wound dressings with antibacterial and can self-adapt to wound are urgently desired and still a challenge. Herein, a series of hydroxypropyl methylcellulose (HPMC) reinforced hydrogel wound dressings (CPH hydrogels) based on collagen/polyvinyl alcohol (COL/PVA) were designed and constructed, which with polyhexamethylene biguanide (PHMB) as antibacterial agent and borax as crosslinking agent. The dynamic cross-linking of reversible borate ester bond and hydrogen bonds endowed the CPH hydrogels with high adaptability and dynamic self-healing properties. The hydrogel exhibited good blood and cell biocompatibility, which with hemolysis rate lower than 5.0 % and cell survival rate higher than 90 %. The hydrogel also possessed excellent antibacterial ability for both E. coli and S. aureus by destroying the integrity of bacterial membrane. More importantly, the hydrogel with the formulation of 5 % COL, 5 %/PVA, 4 % borax and 1.75 % HPMC successfully achieved in promoting wound healing and accelerated collagen deposition, which provided a promising candidate to serve as wound dressing for wound healing.

Multifunctional Adhesive Hydrogels: From Design to Biomedical Applications

Adhesive hydrogels characterized by structural properties similar to the extracellular matrix, excellent biocompatibility, controlled degradation, and tunable mechanical properties have demonstrated significant potential in biomedical applications, including tissue engineering, biosensors, and drug delivery systems. These hydrogels exhibit remarkable adhesion to target substrates and can be rationally engineered to meet specific requirements. In recent decades, adhesive hydrogels have experienced significant advancements driven by the introduction of numerous multifunctional design strategies. This review initially summarizes the chemical bond-based design strategies for tissue adhesion, encompassing static covalent bonds, dynamic covalent bonds, and non-covalent interactions. Subsequently, the multiple functionalities imparted by these diverse design strategies, including highly stretchable and tough performances, responsiveness to microenvironments, anti-freezing/heating properties, conductivity, antibacterial activity, and hemostatic properties are discussed. In addition, recent advances in the biomedical applications of adhesive hydrogels, focusing on tissue repair, drug delivery, medical devices, and wearable sensors are reviewed. Finally, the current challenges are highlighted and future trends in this rapidly evolving field are discussed.

Dynamic silicone hydrogel gauze coatings with dual anti-blood adhesion mechanism for rapid hemostasis and minimal secondary damage

Hemostatic materials that can rapidly control bleeding without causing secondary damage or sharp pain upon removal are receiving increasing demands in acute trauma treatments and first-aid supplies. Here, we report the development of a dynamic silicone hydrogel coating on medical gauze to enable rapid hemostasis and synergistic anti-blood adhesion properties. The silicone hydrogel can spontaneously form oriented cross-linked structures on fibrous medical gauze through a solution-processing method to achieve macroscopic superhydrophobicity with microscopic surface slipperiness, resulting in excellent anti-blood adhesion with the on-wound peeling force at ~0 millinewton. The development of dynamic silicone hydrogel coating on medical gauze enables a unique integration of advanced features including instant bleeding control, excellent anti-blood adhesion, and excellent air permeability. The proposed strategy is also suitable for scalable production, making it promising in the applications of trauma management.

A novel multifunctional nanocomposite hydrogel orchestrates the macrophage reprogramming-osteogenesis crosstalk to boost bone defect repair

Repairing bone defects is a complex cascade reaction process, as immune system regulation, vascular growth, and osteogenic differentiation are essential. Thus, developing a tissue-engineered biomaterial that caters to the complex healing process of bone regeneration remains a major clinical challenge. In the study, Ca2+-TA-rGO (CTAG)/GelMA hydrogels were synthesized by binding Ca2+ using metal chelation to graphene oxide (GO) nanosheets reduced by tannic acid (TA-rGO) and doping them into gelatin methacrylate (GelMA) hydrogels. TA and rGO exhibited biocompatibility and immunomodulatory properties in this composite, while Ca2+ promoted bone formation and angiogenesis. This novel nanocomposite hydrogel demonstrated good mechanical properties, degradability, and conductivity, and it could achieve slow Ca2+ release during bone regeneration. Both in vitro and in vivo experiments revealed that CTAG/GelMA hydrogel modulated macrophage reprogramming and induced a shift from macrophages to healing-promoting M2 macrophages during the inflammatory phase, promoted vascular neovascularization, and facilitated osteoblast differentiation during bone formation. Moreover, CTAG/GelMA hydrogel could downregulate the NF-κB signaling pathway, offering new insights into regulating macrophage reprogramming-osteogenic crosstalk. Conclusively, this novel multifunctional nanocomposite hydrogel provides a multistage treatment for bone and orchestrates macrophage reprogramming-osteogenic crosstalk to boost bone repair.

Epidermal growth factor-loaded, dehydrated physical microgel-formed adhesive hydrogel enables integrated care of wet wounds

Integrated wound care, a sequential process of promoting wound hemostasis, sealing, and healing, is of great clinical significance. However, the wet environment of wounds poses formidable challenges for integrated care. Herein, we developed an epidermal growth factor (EGF)-loaded, dehydrated physical microgel (DPM)-formed adhesive hydrogel for the integrated care of wet wounds. The DPMs were designed using the rational combination of hygroscopicity and reversible crosslinking of physical hydrogels. Unlike regular bioadhesives, which consider interfacial water as a barrier to adhesion, DPMs utilize water to form desirable adhesive structures. The hygroscopicity allowed the DPMs to absorb interfacial water and subsequently, the interfacial adhesion was realized by the interactions between tissue and DPMs. The reversible crosslinks further enabled DPMs to integrate into hydrogels (DPM-Gels), thus achieving wet adhesion. Importantly, the water-absorbing gelation mode of DPMs enabled facile loading of biologically active EGF to promote wound healing. We demonstrated that the DPM-Gels possessed wet tissue adhesive performance, with about 40 times the wet adhesive strength of fibrin glue and about 4 times the burst pressure of human blood pressure. Upon application at the injury site, the EGF-loaded DPM-Gels sequentially promoted efficient wound hemostasis, stable sealing, and quick healing, achieving integrated care of wet wounds.

Facilitating safe and sustained submucosal lift through an endoscopically injectable shear-thinning carboxymethyl starch sodium hydrogel

Traditional submucosal filling materials frequently show insufficient lifting height and duration during clinical procedures. Here, the anionic polysaccharide polymer sodium carboxymethyl starch and cationic Laponite to prepare a hydrogel with excellent shear-thinning ability through physical cross-linking, so that it can achieve continuous improvement of the mucosal cushion through endoscopic injection. The results showed that the hydrogel (56.54 kPa) had a lower injection pressure compared to MucoUp (68.56 kPa). The height of submucosal lifting height produced by hydrogel was higher than MucoUp, and the height maintenance ability after 2 h was 3.20 times that of MucoUp. At the same time, the hydrogel also showed satisfactory degradability and biosafety, completely degrading within 200 h. The hemolysis rate is as low as 0.76 %, and the cell survival rate > 80 %. Subcutaneous implantation experiments confirmed that the hydrogel showed no obvious systemic toxicity. Animal experiments clearly demonstrated the in vivo feasibility of using hydrogels for submucosal uplift. Furthermore, successful endoscopic submucosal dissection was executed on a live pig stomach, affirming the capacity of hydrogel to safely and effectively facilitate submucosal dissection and mitigate adverse events, such as bleeding. These results indicate that shear-thinning hydrogels have a wide range applications as submucosal injection materials.

Electrocatalytic functional group conversion-based carbon resource upgrading

The conversions of carbon resources, such as alcohols, aldehydes/ketones, and ethers, have been being one of the hottest topics most recently for the goal of carbon neutralization. The emerging electrocatalytic upgrading has been regarded as a promising strategy aiming to convert carbon resources into value-added chemicals. Although exciting progress has been made and reviewed recently in this area by mostly focusing on the explorations of valuable anodic oxidation or cathodic reduction reactions individually, however, the reaction rules of these reactions are still missing, and how to purposely find or rationally design novel but efficient reactions in batches is still challenging. The properties and transformations of key functional groups in substrate molecules play critically important roles in carbon resources conversion reactions, which have been paid more attention to and may offer hidden keys to achieve the above goal. In this review, the properties of functional groups are addressed and discussed in detail, and the reported electrocatalytic upgrading reactions are summarized in four categories based on the types of functional groups of carbon resources. Possible reaction pathways closely related to functional groups will be summarized from the aspects of activation, cleavage and formation of chemical bonds. The current challenges and future opportunities of electrocatalytic upgrading of carbon resources are discussed at the end of this review.

Characterization of Three Polysaccharide-Based Hydrogels Derived from Laminaria japonica and Their Hemostatic Properties

Three Laminaria japonica polysaccharides (LJPs) extracted via water extraction (LJP-W), acid extraction (LJP-A), and enzymatic extraction (LJP-E) were used as raw materials to be cross-linked with chitosan and polyvinyl alcohol to prepare hydrogels. Compared with conventional hydrogel systems, all three types of LJP-based polysaccharide hydrogels exhibited better swelling properties (14 times their original weight) and the absorption ability of simulated body fluid (first 2 h: 6-10%). They also demonstrated better rigidity and mechanical strength. Young's modulus of LJP-E was 4 times that of the blank. In terms of hemostatic properties, all three polysaccharide hydrogels did not show significant cytotoxic and hemolytic properties. The enzyme- and acid-extracted hydrogels (LJP-Gel-A and LJP-Gel-E) demonstrated better whole-blood coagulant ability compared with the water-extracted hydrogel (LJP-Gel-W), as evidenced by the whole blood coagulation index being half that of LJP-Gel-W. Additionally, the lactate dehydrogenase viabilities of LJP-Gel-A and LJP-Gel-E were significantly higher, at about four and three times those of water extraction, respectively. The above results suggested that LJP-Gel-A and LJP-Gel-E exhibited better blood coagulation capabilities than LJP-Gel-W, due to their enhanced platelet enrichment and adhesion properties. Consequently, these hydrogels are more conducive to promoting coagulation and have good potential for wound hemostasis.

Emerging trends in the application of hydrogel-based biomaterials for enhanced wound healing: A literature review

Currently, there is a rising global incidence of diverse acute and chronic wounds, underscoring the immediate necessity for research and treatment advancements in wound repair. Hydrogels have emerged as promising materials for wound healing due to their unique physical and chemical properties. This review explores the classification and characteristics of hydrogel dressings, innovative preparation strategies, and advancements in delivering and releasing bioactive substances. Furthermore, it delves into the functional applications of hydrogels in wound healing, encompassing areas such as infection prevention, rapid hemostasis and adhesion adaptation, inflammation control and immune regulation, granulation tissue formation, re-epithelialization, and scar prevention and treatment. The mechanisms of action of various functional hydrogels are also discussed. Finally, this article also addresses the current limitations of hydrogels and provides insights into their potential future applications and upcoming innovative designs.

Facile Bond Exchanging Strategy for Engineering Wet Adhesion and Antioxidant/Antibacterial Thin Layer over a Dynamic Hydrogel via the Carbon Dots Derived from Tannic Acid/ε-Polylysine

Adhesive hydrogels, playing an essential role in stretchable electronics, soft robotics, tissue engineering, and so forth, upon functioning often need to adhere to various substrates in wet conditions and simultaneously exhibit antibacterial/antioxidant properties while possessing the intrinsic stretchability and elasticity of the hydrogel network intact. Therefore, simple approaches to conveniently access adhesive hydrogels with multifunctional surfaces are being pursued. Herein, a facile strategy has been proposed to construct multifunctional adhesive hydrogels via surface engineering of a multifunctional carbon dot (CD)-decorated polymeric thin layer by dynamic bond exchange. By this strategy, a double cross-linked network hydrogel of polyacrylamide (PAM) and oxidized dextran (ODA) was engineered with a unique dense layer over the Schiff base hydrogel matrix by aqueous solution immersion of PA-120, versatile CDs derived from tannic acid (TA) and ε-polylysine (PL). Without any additional agents, the PA-120 CDs with residual polyphenolic/catechol and amine moieties were incorporated into the surface structure of the hydrogel network by the combined action of the Schiff base and hydrogen bonds to form a dense surface layer that can exhibit high wet adhesive performance via the amine-polyphenol/catechol pair. The armor-like dense architecture also endowed hydrogels with considerably enhanced tensile/compression properties and excellent antioxidant/antibacterial abilities. Besides, the single-sided modified Janus hydrogel and completely surface-modified hydrogel can be flexibly developed through this approach. This strategy will provide new insights into the preparation and application of surface-modified hydrogels featuring multiple functions and tunable interfacial properties.

The transformation of multifunctional bio-patch to hydrogel on skin wounds for efficient scarless wound healing

Hydrogels have been widely used in various biomedical applications, including skin regeneration and tissue repair. However, the capability of certain hydrogels to absorb exudate or blood from surrounding wounds, coupled with the challenge in their long-term storage to prevent bacterial growth, can pose limitations to their efficacy in biological applications. To address these challenges, the development of a multifunctional aloin-arginine-alginate (short for 3A) bio-patch capable of transforming into a hydrogel upon absorbing exudate or blood from neighboring wounds for cutaneous regeneration is proposed. The 3A bio-patch exhibits outstanding features, including an excellent porous structure, swelling properties, and biodegradability. These characteristics allow for the rapid absorption of wound exudates and subsequent transformation into a hydrogel that is suitable for treating skin wounds. Furthermore, the 3A bio-patch exhibits remarkable antibacterial and anti-inflammatory properties, leading to accelerated wound healing and scarless repair in vivo. This study presents a novel approach to the development of cutaneous wound dressing materials.

Facilely Prepared Thirsty Granules Arouse Tough Wet Adhesion on Overmoist Wounds for Hemostasis and Tissue Repair

Bioadhesives have been widely used in hemostasis and tissue repair, but the overmoist and wet nature of wound surface (due to the presence of blood and/or wound exudate) has led to poor wet adhesion of bioadhesives, which interrupts the continuous care of wounds. Here, a thirsty polyphenolic silk granule (Tan@SF-pwd-hydro), which absorbs blood and exudate to self-convert to robust bioadhesives (Tan@SF-gel-hydro) in situ, was facilely developed in this study for enhanced wet adhesion toward hemostasis and tissue repair. Tan@SF-pwd-hydro could shield wounds' wetness and immediately convert itself to Tan@SF-gel-hydro to seal wounds for hemorrhage control and wound healing. The maximum adhesiveness of Tan@SF-gel-hydro over wet pigskin was as high as 59.8 ± 2.1 kPa. Tan@SF-pwd-hydro is a promising transformative dressing for hemostasis and tissue repair since its hemostatic time was approximately half of that of the commercial hemostatic product, CeloxTM, and its healing period was much shorter than that of the commercial bioadhesive product, TegadermTM. This pioneering study utilized adverse wetness over wounds to arouse robust adhesiveness by converting thirsty granules to bioadhesives in situ, creatively turning adversity into opportunities. The facile fabrication approach also offers new perspectives for manufacturing sustainability of biomaterials.

Bionic ordered structured hydrogels: structure types, design strategies, optimization mechanism of mechanical properties and applications

Natural organisms, such as lobsters, lotus, and humans, exhibit exceptional mechanical properties due to their ordered structures. However, traditional hydrogels have limitations in their mechanical and physical properties due to their disordered molecular structures when compared with natural organisms. Therefore, inspired by nature and the properties of hydrogels similar to those of biological soft tissues, researchers are increasingly focusing on how to investigate bionic ordered structured hydrogels and render them as bioengineering soft materials with unique mechanical properties. In this paper, we systematically introduce the various structure types, design strategies, and optimization mechanisms used to enhance the strength, toughness, and anti-fatigue properties of bionic ordered structured hydrogels in recent years. We further review the potential applications of bionic ordered structured hydrogels in various fields, including sensors, bioremediation materials, actuators, and impact-resistant materials. Finally, we summarize the challenges and future development prospects of bionic ordered structured hydrogels in preparation and applications.

In situ generation of bioadhesives using dry tannic silk particles: a wet-adhesion strategy relying on removal of hydraulic layer over wet tissues for wound care

Tissue adhesives have been widely used in biomedical applications. However, the presence of a hydrated layer on the surface of wet tissue severely hinders their adhesion capacities, resulting in ineffective wound treatment. To address this issue, a dry particle dressing (plas@SF/tann-hydro-pwd) capable of removing the hydrated layer and converting in situ to bioadhesives (plas@SF/tann-hydro-gel) was fabricated via simple physical mixing based on the hydrophobic-hydrogen bonding synergistic effect and Schiff-base reaction. It was found that the plas@SF/tann-hydro-gel bioadhesive, which was changed from plas@SF/tann-hydro-pwd dressing by adsorption of water, exhibited good wet adhesion to diverse biological tissues. In addition, the wet adhesion qualities of the plas@SF/tann-hydro-gel adhesive was studied under a variety of demanding conditions, including a wide range of temperatures, varying pH levels, highly concentrated salt solutions, and simulated fluids. Experiments on animals had showed that the adhesive plas@SF/tann-hydro-gel has superior wet adhesion qualities and superior wound healing properties compared to the commercial product Tegaderm™. This study develops a new wet-adhesion technique employing dry particle dressing to eliminate the hydrated layer over wet tissues for the in situ creation of gel bioadhesives for wound healing.

Ultra-stretchable, tissue-adhesive, shape-adaptive, self-healing, on-demand removable hydrogel dressings with multiple functions for infected wound healing in regions of high mobility

Bacterial infection in the most mobile area usually leads to delayed healing and functional restriction, which has been a long-term challenge in clinic. Developing hydrogel-based dressings with mechanical flexibly, high adhesive and anti-bacterial properties, will contribute to the healing and therapeutic effects especially for this typical skin wound. In this work, composite hydrogel named PBOF through multi-reversible bonds between polyvinyl alcohol, borax, oligomeric procyanidin and ferric ion demonstrated a 100 times ultra-stretch ability, 24 kPa of highly tissue-adhesive, rapid shape-adaptability within 2 min and self-healing feature within 40 s, was designed as the multifunctional wound dressing for the Staphylococcus aureus-infected skin wound in the mice nape model. Besides, this hydrogel dressing could be easily removed on-demand within 10 min by water. The rapid disassembly of this hydrogel is related to the formation of hydrogen bonds between polyvinyl alcohol and water. Moreover, the multifunctional properties of this hydrogel include strong anti-oxidative, anti-bacteria and hemostasis derived from oligomeric procyanidin and photothermal effect of ferric ion/polyphenol chelate. The killing ratio of the hydrogel on Staphylococcus aureus in infected skin wound reached 90.6% when exposed to 808 nm irradiation for 10 min. Simultaneously, reduced oxidative stress, suppressed inflammation, and promoted angiogenesis all together accelerated wound healing. Therefore, this well-designed multifunctional PBOF hydrogel holds great promise as skin wound dressing especially in the high mobile regions of the body. STATEMENT OF SIGNIFICANCE: An ultra-stretchable, highly tissue-adhesive, and rapidly shape-adaptive, self-healing and on-demand removable hydrogel based on multi-reversible bonds among polyvinyl alcohol, borax, oligomeric procyanidin and ferric ion is designed as dressing material for infected wound healing in the movable nape. The rapid on-demand removal of the hydrogel relates to the formation of hydrogen bonds between polyvinyl alcohol and water. This hydrogel dressing shows strong antioxidant capacity, rapid hemostasis and photothermal antibacterial ability. This is derived from oligomeric procyanidin and thephotothermal effect of ferric ion/polyphenol chelate, which eliminates bacterial infection, reduces oxidative stress, regulates inflammation, promotes angiogenesis, and finally accelerates the infected wound healing in movable part.

Conductive Hydrogel Patches with High Elasticity and Fatigue Resistance for Cardiac Microenvironment Remodeling

Remodeling the conductive zone to assist normal myocardial contraction and relaxation during myocardial fibrosis has become the primary concern of myocardial infarction (MI) regeneration. Herein, we report an unbreakable and self-recoverable hyaluronic acid conductive cardiac patch for MI treatment, which can maintain structural integrity under mechanical load and integrate mechanical and electrical conduction and biological cues to restore cardiac electrical conduction and diastolic contraction function. Using the free carboxyl groups and aldehyde groups in the hydrogel system, excellent adhesion properties are achieved in the interface between the myocardial patch and the tissue, which can be closely integrated with the rabbit myocardial tissue, reducing the need for suture. Interestingly, the hydrogel patch exhibits sensitive conductivity (ΔR/R0 ≈ 2.5) for 100 cycles and mechanical stability for 500 continuous loading cycles without collapse, which allows the patch to withstand mechanical damage caused by sustained contraction and relaxation of the myocardial tissue. Moreover, considering the oxidative stress state caused by excessive ROS in the MI area, we incorporated Rg1 into the hydrogel to improve the abnormal myocardial microenvironment, which achieved more than 80% free radicalscavenging efficiency in the local infarcted region and promoted myocardial reconstruction. Overall, these Rg1-loaded conductive hydrogels with highly elastic fatigue resistance have great potential in restoring the abnormal electrical conduction pathway and promoting the myocardial microenvironment, thereby repairing the heart and improving the cardiac function.

Enzyme-regulated NO programmed to release from hydrogel-forming microneedles with endogenous/photodynamic synergistic antibacterial for diabetic wound healing

The infection-prone wound pathology microenvironment leads to ulceration and difficult healing of diabetic wounds, which seriously affects the quality of survival of patients. In this study, natural polymer materials gelatin and polylysine were used as substrates. By introducing iron/tannic acid (Fe^IIITA) composite nanoparticles with excellent photothermal properties into the system, the glutamine residues of gelatin were crosslinked with the primary ammonia of polylysine by glutamine aminotransferase. A nanocomposite hydrogel with excellent antibacterial ability and NO production was constructed it was used to improve the clinical problems of diabetes wounds that were difficult to vascularize and easy to be infected. Under the premise of maintaining its structural stability, the hydrogel can be customized to meet the needs of different mechanical strengths by adjusting the ratios to match different diabetic wounds. Meanwhile, the photothermal effect of Fe^IIITA nanoparticles can synergize with the endogenous antibacterial ability of polylysine to improve the antibacterial efficacy of hydrogels. The potential of hydrogel to promote intracellular NO production was confirmed by fluorescent staining. Microneedle patches prepared from hydrogel can be applied to diabetic wounds, which can achieve NO deep release. Its anti-inflammatory and angiogenic abilities are also useful in achieving effective healing of diabetic wounds.