Photon Upconversion Systems Based on Triplet-Triplet Annihilation as Photosensitizers for Chemical Transformations

Carrier dynamics competition in the nanocrystal-molecule complex for triplet generation studied by transient-absorption spectroscopy

Owing to the long-lived decay of triplet excited state, extensive efforts have been devoted to efficient triplet generation for applications covering triplet-triplet annihilation for photon upconversion, photocycloaddition and photoredox catalysis. Among the candidates, nanocrystal-molecule complexes have received tremendous attention for triplet generation because of easier spin flip and negligible energy loss during intersystem crossing. However, the triplet energy transfer (TET) from nanocrystals (NCs) to molecules can be very complicated in actual situation due to intricate energy level alignment and inevitable defect states, which often involves various decay pathes of the excited state competing with TET. Understanding the detailed carrier dynamics in such complexes is strongly necessary for related applications. Here, a CdSe-TCA (5-tetracene carboxylic acid) complex with a Type-II like energy level alignment is synthesized through precisely adjusting the dimension of CdSe NC. Based on series of spectral measurements, especially the transient absorption (TA) spectroscopy, the results show various carrier dynamics including hole-transfer-mediated TET, Förster resonance energy transfer (FRET) and carrier trapping. Although the carrier trapping by defect states in CdSe NC is revealed not associated with the TET from CdSe to TCA, the FRET is proved to competing with the TET process. Both the FRET and defect states should be refrained for efficient TET in such complexes. This study could provide further insight for understanding the carrier dynamics competition in NC-molecule complexes for triplet generation and benefit related optoelectronics applications.

Enhancing the near-infrared upconversion photocatalytic activity of ZnO/Bi3Ti2O8F:Yb3+, Er3+ by modulating the internal electric field through Z-scheme heterojunction construction

Exploring strategies to improve the near-infrared response of photocatalysts is an urgent challenge that can be overcome by utilizing upconversion (UC) luminescence to enhance photocatalysis. This paper reports the fabrication of a ZnO/Bi3Ti2O8F:Yb3+, Er3+ (ZnO/BTOFYE) Z-scheme heterojunction based on a Bi3Ti2O8F:Yb3+, Er3+ (BTOFYE) UC photocatalyst via electrostatic self-assembly. Fermi energy difference at the interface of BTOFYE and ZnO generates a strong internal electric field (IEF) in the Z-scheme heterojunction, offering a novel charge transfer mode that promotes carrier transfer and separation while retaining the strong redox capability. These results are confirmed through in situ X-ray photoelectron spectroscopy, in situ Kelvin probe force microscopy, electron spin resonance, and density functional theory calculations. In addition, the effect of the IEF on the UC luminescence process of Er3+ enhances the luminescence intensity, considerably improving the UC utilization efficiency. The optimal ZnO/BTOFYE degrades 64 % of ciprofloxacin in 120 min, which is 2.3 times more than that degraded by BTOFYE. Overall, the results of this study offer a reference for the rational development of high efficiency UC photocatalysts by generating IEF in Z-scheme heterojunctions.

Impact of Spontaneous Orientational Polarization on Triplet-Triplet Upconversion-Based Blue Organic Light-Emitting Diodes

The spontaneous orientation polarization (SOP) of a permanent dipole moment of the molecule induces a giant surface potential (GSP) in an organic semiconductor film, and GSP is expected to be a crucial parameter for understanding the operational mechanism of organic light-emitting diodes (OLEDs). This study demonstrates that the voltage-dependent migration of a carrier recombination zone induced by a polar electron transporting layer (ETL) having a positive SOP causes a decline in the overall performance of the OLED in triplet-triplet upconversion (TTU) based on OLEDs. Specifically, the TTU efficiency in an OLED with 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) as the ETL decreased by 20% due to the reduction of electrically generated triplet exciton density. This decrease resulted in a lower external electroluminescence (EL) quantum efficiency (EQE) of 5.4% at 1 mA cm-2, while the OLED with a nonpolar ETL resulted in an EQE of around 8.1% at 1 mA cm-2. We confirmed a shift in the recombination zone from the current density dependence of the EL spectra in the OLEDs. Our results indicate that the fixed carrier recombination zone near a hole transport layer and an emitting layer (HTL/EML) strongly enhanced the TTU process, while the polar EML/ETL interface induced the migration of the recombination zone depending on voltage, resulting in the decrease of triplet exciton density.

In-Flow Heterogeneous Triplet-Triplet Annihilation Upconversion

Photon upconversion based on triplet-triplet annihilation (TTA-UC) is an attractive wavelength conversion with increasing use in organic synthesis in the homogeneous phase; however, this technology has not performed with canonical solid catalysts yet. Herein, a BOPHY dye covalently anchored on silica is successfully used as a sensitizer in a TTA system that efficiently catalyzes Mizoroki-Heck coupling reactions. This procedure has enabled the implementation of in-flow reaction conditions for the synthesis of a variety of aromatic compounds, and mechanistic proof has been obtained by means of transient absorption spectroscopy.

Switchover from singlet oxygen to superoxide radical through a photoinduced two-step sequential energy transfer process

The competitive nature of type II photosensitizers in the transfer of excitation energy for the generation of singlet oxygen (1O2) presents significant challenges in the design of type I photosensitizers to produce the superoxide anion radical (O2˙-). In this study, we present an efficient method for the direct transformation of type II photosensitizers into type I photosensitizers through the implementation of an artificial light-harvesting system (ALHSs) involving a two-step sequential energy transfer process. The designed supramolecular complex (DNPY-SBE-β-CD) not only has the ability to generate 1O2 as type II photosensitizers, but also demonstrates remarkable fluorescence properties in aqueous solution, which renders it an efficient energy donor for the development of type I photosensitizers ALHSs, thereby enabling the efficient generation of O2˙-. Meanwhile, to ascertain the capability and practicality of this method, two organic reactions were conducted, namely the photooxidation reaction of thioanisole and oxidative hydroxylation of arylboronic acids, both of which display a high level of efficiency and exhibit significant catalytic performance. This work provides an efficient method for turning type II photosensitizers into type I photosensitizers by a two-step sequential energy transfer procedure.

Coulomb interactions for mediator-enhanced sensitized triplet-triplet annihilation upconversion in solution

Sensitized triplet-triplet annihilation upconversion offers an attractive possibility to replace a high-energy photon by two photons with lower energy through the combination of a light-harvesting triplet sensitizer and an annihilator for the formation of a fluorescent singlet state. Typically, high annihilator concentrations are required to achieve an efficient initial energy transfer and as a direct consequence the most highly energetic emission is often not detectable due to intrinsic reabsorption by the annihilator itself. Herein, we demonstrate that the addition of a charge-adapted mediator drastically improves the energy transfer efficiency at low annihilator concentrations via an energy transfer cascade. Inspired by molecular dyads and recent developments in nanocrystal-sensitized upconversion, our system exploits a concept to minimize intrinsic filter effects, while boosting the upconversion quantum yield in solution. A sensitizer-annihilator combination consisting of a ruthenium-based complex and 9,10-diphenylanthracene (DPA) is explored as model system and a sulfonated pyrene serves as mediator. The impact of opposite charges between sensitizer and mediator - to induce coulombic attraction and subsequently result in accelerated energy transfer rate constants - is analyzed in detail by different spectroscopic methods. Ion pairing and the resulting static energy transfer in both directions is a minor process, resulting in an improved overall performance. Finally, the more intense upconverted emission in the presence of the mediator is used to drive two catalytic photoreactions in a two-chamber setup, illustrating the advantages of our approach, in particular for photoreactions requiring oxygen that would interfere with the upconversion system.

First-Row d6 Metal Complex Enables Photon Upconversion and Initiates Blue Light-Dependent Polymerization with Red Light

Photosensitizers for sensitized triplet-triplet annihilation upconversion (sTTA-UC) often rely on precious heavy metals, whereas coordination complexes based on abundant first-row transition metals are less common. This is mainly because long-lived triplet excited states are more difficult to obtain for 3d metals, particularly when the d-subshell is only partially filled. Here, we report the first example of sTTA-UC based on a 3d6 metal photosensitizer yielding an upconversion performance competitive with precious metal-based analogues. Using a newly developed Cr0 photosensitizer featuring equally good photophysical properties as an OsII benchmark complex in combination with an acetylene-decorated anthracene annihilator, red-to-blue upconversion is achievable. The upconversion efficiency under optimized conditions is 1.8 %, and the excitation power density threshold to reach the strong annihilation limit is 5.9 W/cm2 . These performance factors, along with high photostability, permit the initiation of acrylamide polymerization by red light, based on radiative energy transfer between delayed annihilator fluorescence and a blue light absorbing photo-initiator. Our study provides the proof-of-concept for photon upconversion with elusive first-row analogues of widely employed precious d6 metal photosensitizers, and for their application in photochemical reactions triggered by excitation wavelengths close to near-infrared.

Isoacridone dyes with parallel reactivity from both singlet and triplet excited states for biphotonic catalysis and upconversion

Metal-based photosensitizers commonly undergo quantitative intersystem crossing into photoactive triplet excited states. In contrast, organic photosensitizers often feature weak spin-orbit coupling and low intersystem crossing efficiencies, leading to photoactive singlet excited states. By modifying the well-known acridinium dyes, we obtained a new family of organic photocatalysts, the isoacridones, in which both singlet- and triplet-excited states are simultaneously photoactive. These new isoacridone dyes are synthetically readily accessible and show intersystem crossing efficiencies of up to 52%, forming microsecond-lived triplet excited states (T1), storing approximately 1.9 eV of energy. Their photoactive singlet excited states (S1) populated in parallel have only nanosecond lifetimes, but store ∼0.4 eV more energy and act as strong oxidants. Consequently, the new isoacridone dyes are well suited for applications requiring parallel triplet-triplet energy transfer and photoinduced electron transfer elementary steps, which have become increasingly important in modern photocatalysis. In proof-of-principle experiments, the isoacridone dyes were employed for Birch-type arene reductions and C-C couplings via sensitization-initiated electron transfer, substituting the commonly used iridium or ruthenium based photocatalysts. Further, in combination with a pyrene-based annihilator, sensitized triplet-triplet annihilation upconversion was achieved in an all-organic system, where the upconversion quantum yield correlated with the intersystem crossing quantum yield of the photosensitizer. This work seems relevant in the greater contexts of developing new applications that utilize biphotonic photophysical and photochemical behavior within metal-free systems.

Photocyclization by a triplet-triplet annihilation upconversion pair in water - avoiding UV-light and oxygen removal

We present a formal [2 + 2]-cycloaddition of unsaturated ketones enabled by a green-to-ultraviolet triplet-triplet annihilation upconversion (TTA-UC) pair, using commercially available Ru(bpy)32+ and pyrene as sensitizer and annihilator, respectively. In the developed protocol, visible light irradiation at λmax = 520 nm allows for the reaction to proceed without the need for UV-light and the aqueous medium eliminates the need for oxygen removing protocols. Through this study, the application of the readily available upconversion pair is broadened to include cyclization reactions. We showcase the utility of the system by generating bicyclo[2.1.1]hexanes that are valuable bioisosteres of ortho-substituted benzenes, a promising motif for pharmaceuticals.

The Novel Organic Emitters for High-Performance Narrow-Band Deep Blue OLEDs

Narrow-band deep-blue organic light-emitting diodes (OLEDs) have played a key role in the field of high-quality full-color displays. However, because of the considerable challenges of inherent band gaps, unbalanced carrier injection and the lack of molecular structures, narrow-band deep-blue emitters develop slowly compared with red- and green-emitting materials. Encouragingly, with the continuous efforts of scientists in recent years, great progress has been made in the molecule design and material synthesis of highly efficient narrow-band deep-blue emitters. The typical deep-blue emitters which exhibit narrow emission with a full width at half maximum of < 50 nm are summarized in this article. They are divided into the three categories: fluorescence, phosphorescence and thermally activated delayed fluorescence. The methods of molecular design for realizing narrow-band deep-blue emission are described in detail and future research directions are also discussed in this article.

Triplet quenching pathway control with molecular dyads enables the identification of a highly oxidizing annihilator class

Metal complex - arene dyads typically act as more potent triplet energy donors compared to their parent metal complexes, which is frequently exploited for increasing the efficiencies of energy transfer applications. Using unexplored dicationic phosphonium-bridged ladder stilbenes (P-X2+) as quenchers, we exclusively observed photoinduced electron transfer photochemistry with commercial organic photosensitizers and photoactive metal complexes. In contrast, the corresponding pyrene dyads of the tested ruthenium complexes with the very same metal complex units efficiently sensitize the P-X2+ triplets. The long-lived and comparatively redox-inert pyrene donor triplet in the dyads thus provides an efficient access to acceptor triplet states that are otherwise very tricky to obtain. This dyad-enabled control over the quenching pathway allowed us to explore the P-X2+ photochemistry in detail using laser flash photolysis. The P-X2+ triplet undergoes annihilation producing the corresponding excited singlet, which is an extremely strong oxidant (+2.3 V vs. NHE) as demonstrated by halide quenching experiments. This behavior was observed for three P2+ derivatives allowing us to add a novel basic structure to the very limited number of annihilators for sensitized triplet-triplet annihilation in neat water.

Metal-Organic Bichromophore Lowers the Upconversion Excitation Power Threshold and Promotes UV Photoreactions

Sensitized triplet-triplet annihilation upconversion is a promising strategy to use visible light for chemical reactions requiring the energy input of UV photons. This strategy avoids unsafe ultraviolet light sources and can mitigate photo-damage and provide access to reactions, for which filter effects hamper direct UV excitation. Here, we report a new approach to make blue-to-UV upconversion more amenable to photochemical applications. The tethering of a naphthalene unit to a cyclometalated iridium(III) complex yields a bichromophore with a high triplet energy (2.68 eV) and a naphthalene-based triplet reservoir featuring a lifetime of 72.1 μs, roughly a factor of 20 longer than the photoactive excited state of the parent iridium(III) complex. In combination with three different annihilators, consistently lower thresholds for the blue-to-UV upconversion to crossover from a quadratic into a linear excitation power dependence regime were observed with the bichromophore compared to the parent iridium(III) complex. The upconversion system composed of the bichromophore and the 2,5-diphenyloxazole annihilator is sufficiently robust under long-term blue irradiation to continuously provide a high-energy singlet-excited state that can drive chemical reactions normally requiring UV light. Both photoredox and energy transfer catalyses were feasible using this concept, including the reductive N-O bond cleavage of Weinreb amides, a C-C coupling reaction based on reductive aryl debromination, and two Paternò-Büchi [2 + 2] cycloaddition reactions. Our work seems relevant in the context of developing new strategies for driving energetically demanding photochemistry with low-energy input light.

Blue-to-UVB Upconversion, Solvent Sensitization and Challenging Bond Activation Enabled by a Benzene-Based Annihilator

Several energy-demanding photoreactions require harsh UV light from inefficient light sources. The conversion of low-energy visible light to high-energy singlet states via triplet-triplet annihilation upconversion (TTA-UC) could offer a solution for driving such reactions under mild conditions. We present the first annihilator with an emission maximum in the UVB region that, combined with an organic sensitizer, is suitable for blue-to-UVB upconversion. The annihilator singlet was successfully employed as an energy donor in subsequent FRET activations of aliphatic carbonyls. This hitherto unreported UC-FRET reaction sequence was directly monitored using laser spectroscopy and applied to mechanistic irradiation experiments demonstrating the feasibility of Norrish chemistry. Our results provide clear evidence for a novel blue light-driven substrate or solvent activation strategy, which is important in the context of developing more sustainable light-to-chemical energy conversion systems.

Sensitizer-controlled photochemical reactivity via upconversion of red light

By combining the energy input from two red photons, chemical reactions that would normally require blue or ultraviolet irradiation become accessible. Key advantages of this biphotonic excitation strategy are that red light usually penetrates deeper into complex reaction mixtures and causes less photo-damage than direct illumination in the blue or ultraviolet. Here, we demonstrate that the primary light-absorber of a dual photocatalytic system comprised of a transition metal-based photosensitizer and an organic co-catalyst can completely alter the reaction outcome. Photochemical reductions are achieved with a copper(i) complex in the presence of a sacrificial electron donor, whereas oxidative substrate activation occurs with an osmium(ii) photosensitizer. Based on time-resolved laser spectroscopy, this changeover in photochemical reactivity is due to different underlying biphotonic mechanisms. Following triplet energy transfer from the osmium(ii) photosensitizer to 9,10-dicyanoanthracene (DCA) and subsequent triplet-triplet annihilation upconversion, the fluorescent singlet excited state of DCA triggers oxidative substrate activation, which initiates the cis to trans isomerization of an olefin, a [2 + 2] cycloaddition, an aryl ether to ester rearrangement, and a Newman-Kwart rearrangement. This oxidative substrate activation stands in contrast to the reactivity with a copper(i) photosensitizer, where photoinduced electron transfer generates the DCA radical anion, which upon further excitation triggers reductive dehalogenations and detosylations. Our study provides the proof-of-concept for controlling the outcome of a red-light driven biphotonic reaction by altering the photosensitizer, and this seems relevant in the greater context of tailoring photochemical reactivities.

Accessible Low-Cost Laser Pointers for the Reduction of Aryl Halides via Triplet-Triplet Annihilation Upconversion in Aerated Gels

The search for economic alternatives in the use of expensive scientific equipment represents a way of providing many laboratories access to scientific developments that, otherwise, might be hampered by economic constraints. This inspired the purpose of this work, which was to demonstrate for the first time that we can carry out the photoreduction of aryl halides via green-to-blue upconversion in an aerated gel medium, using a simple economic set-up based on easily accessible and low-cost laser pointers. The optimized set-up consists of three laser pointers connected to a switching-mode power supply. One laser should be aligned to Z-axis and separated 5 cm from the sample, while the light incidence of the other two lasers should be adjusted to 45° and separated ca. 3 cm from the sample. The results of this study were found to be reproducible in random experiments and demonstrated that the photoreduction of several aryl halides can be carry out within 24 h of irradiation with comparable yields and mass balances, to those obtained with other very expensive pulsed laser sources. An economic estimation of the expenses concludes that we can easily reduce by >98% the total cost of this type of research by using the described set-up. Our work offers many groups with limited resources a feasible alternative to work in this area without the necessity of extremely expensive devices.

Recent Advances in the Photoreactions Triggered by Porphyrin-Based Triplet–Triplet Annihilation Upconversion Systems: Molecular Innovations and Nanoarchitectonics

Triplet–triplet annihilation upconversion (TTA-UC) is a very promising technology that could be used to convert low-energy photons to high-energy ones and has been proven to be of great value in various areas. Porphyrins have the characteristics of high molar absorbance, can form a complex with different metal ions and a high proportion of triplet states as well as tunable structures, and thus they are important sensitizers for TTA-UC. Porphyrin-based TTA-UC plays a pivotal role in the TTA-UC systems and has been widely used in many fields such as solar cells, sensing and circularly polarized luminescence. In recent years, applications of porphyrin-based TTA-UC systems for photoinduced reactions have emerged, but have been paid little attention. As a consequence, this review paid close attention to the recent advances in the photoreactions triggered by porphyrin-based TTA-UC systems. First of all, the photochemistry of porphyrin-based TTA-UC for chemical transformations, such as photoisomerization, photocatalytic synthesis, photopolymerization, photodegradation and photochemical/photoelectrochemical water splitting, was discussed in detail, which revealed the different mechanisms of TTA-UC and methods with which to carry out reasonable molecular innovations and nanoarchitectonics to solve the existing problems in practical application. Subsequently, photoreactions driven by porphyrin-based TTA-UC for biomedical applications were demonstrated. Finally, the future developments of porphyrin-based TTA-UC systems for photoreactions were briefly discussed.