Investigation of commercial PbCrO4/TiO2 for photodegradation of rhodamine B in aqueous solution by visible light

Rational sonochemical engineering of Ag2CrO4/g-C3N4 heterojunction for eradicating RhB dye under full broad spectrum

In this novel research, S-scheme Ag2CrO4/g-C3N4 heterojunctions were generated by sonochemical hybridization of different compositions of Ag2CrO4 nanoparticles [EVB = +2.21 eV] and g-C3N4 sheets [ECB = -1.3 eV] for destructing RhB dye under artificial solar radiation. The as-synthesized nanocomposites were subjected to X-ray diffraction [XRD], diffuse reflectance spectrum [DRS], X-ray photoelectron spectroscopy [XPS], N2-adsorption-desorption isotherm, photoluminescence [PL] and high resolution transmission electron microscope [HRTEM] analysis to explore the interfacial interactions between g-C3N4 sheets and Ag2CrO4 nanoparticles. Spherical Ag2CrO4 nanoparticles deposited homogeneously on the wrinkles points of g-C3N4 sheets at nearly equidistant from each other facilitating the uniform absorption of solar radiations. The absorbability of solar radiations was enhanced by introducing 20 wt % Ag2CrO4 on g-C3N4 sheets. The surface area of g-C3N4 sheets was reduced from 37.5 to 16.4 m2/g and PL signal intensity diminished by 80 % implying the successful interfacial interaction between Ag2CrO4 nanoparticles and g-C3N4 sheets. The photocatalytic performance of heterojunctions containing 20 % Ag2CrO4 and 80 % g-C3N4 destructed 96 % of RhB dye compared with 60 and 33 % removal on the surface of pristine g-C3N4 sheets and Ag2CrO4, respectively. Benzoquinone and ammonium oxalate are strongly scavenged the dye decomposition revealing the strong influence of valence band holes of Ag2CrO4 and superoxide radicals in destructing RhB dye under solar radiations. S-scheme charge transportation mechanism was suggested rather than type II heterojunction on the light of scavenger trapping experiments results and PL spectrum of terephthalic acid. Overall, this research work illustrated the manipulation of novel S-scheme heterojunction with efficient redox power for destructing various organic pollutants persisted in water resources.

A novel layered double hydroxide-based ternary nanocomposite for the effective photocatalytic degradation of rhodamine B

Photocatalytic degradation of organic pollutants is a green and effective route of wastewater treatment. Zinc oxide was initially used for this purpose; however, calcined zinc/chromium layered double hydroxide (ZnCr-LDO) and cadmium sulfide quantum dots (CdSQDs)-based nanocomposites proved as superior alternatives. Herein, we report a green sonochemical method for the sol-gel fabrication of novel CdSQDs@ZnCr-LDO/ZnO ternary nanocomposite that exhibited exceptional photocatalytic activity for the degradation of rhodamine B dye (RhB), in wastewaters, under UV-A-irradiation. The features of the ternary nanocomposite were investigated using various physicochemical techniques, including XRD, SEM, TEM, EDX, XPS, BET, zeta potential, DRS, and PL measurements. The RhB dye % removal was 38.02, 40.2, and 98% using pristine ZnO, ZnCr-LDO and the ternary CdSQDs@ZnCr-LDO/ZnO-based nanomaterials, respectively, reflecting the superior ternary nanocomposite's photocatalytic activity that made it an excellent competitor to commonly reported photocatalysts. Additionally, an investigation was carried out to determine the key reactive species in the photocatalytic degradation of RhB, considering both scavenger's type and concentration. The prevailing mechanism was found to be the reductive photodegradation pathway. Furthermore, several models were utilized to describe the kinetics of photocatalytic performance of the ternary nanocomposite and a typical Z-scheme type-II photocatalytic heterojunction mechanism was inferred.

Ba3(PO4)2 Photocatalyst for Efficient Photocatalytic Application

Barium phosphate (Ba3(PO4)2) is a class of material that has attracted significant attention thanks to its chemical stability and versatility. However, the use of Ba3(PO4)2 as a photocatalyst is scarcely reported, and its use as a photocatalyst has yet to be reported. Herein, Ba3(PO4)2 nanoflakes synthesis is optimized using sol-gel and hydrothermal methods. The as-prepared Ba3(PO4)2 powders are investigated using physicochemical characterizations, including XRD, SEM, EDX, FTIR, DRS, J-t, LSV, Mott-Schottky, and EIS. In addition, DFT calculations are performed to investigate the band structure. The oxidation capability of the photocatalysts is investigated depending on the synthesis method using rhodamine B (RhB) as a pollutant model. Both Ba3(PO4)2 samples prepared by the sol-gel and hydrothermal methods display high RhB photodegradation of 79% and 68%, respectively. The Ba3(PO4)2 obtained using the sol-gel process exhibits much higher stability under light excitation after four regeneration cycles. The photocatalytic oxidation mechanism is proposed based on the active species trapping experiments where O2 •‒ is the most reactive species. The finding shows the promising potential of Ba3(PO4)2 photocatalysts and opens the door for further investigation and application in various photocatalytic applications.

Photosensitization of TiO2 microspheres by novel Quinazoline-derivative as visible-light-harvesting antenna for enhanced Rhodamine B photodegradation

Water pollution is one of the global threats severely affecting our planet and human health. Organic textile dyes are one of the common organic water pollutants that are presentient to degradation by traditional physical methods. Semiconductor-assisted photocatalysis is considered a green, efficient, and sustainable technology for wastewater treatment. To maximize the efficient utilization of solar radiation, it is of pivotal significance to explore novel organic molecules to be employed as efficient dye sensitizers for wide-bandgap semiconductors to extend their performance to the Visible-light region. Hence, in this work, we are proposing the design and synthesis of novel structures of QAD molecule as a dye photosensitizer with extended visible light absorptivity due to the extended π-π/n-π conjugations, to promote the performance of TiO2 nanoparticles to the visible-light region and enhance the charge separation. The physicochemical characterizations confirmed the successful synthesis of QAD, TiO2, and QAD/TiO2 samples with the proposed structures. The anchoring of QAD molecules on the surface of TiO2 caused a substantial improvement in the optical characteristics of TiO2 as well as overcoming its common drawbacks by decreasing its bandgap energy to 2.6 eV, a remarkable reduction of PL intensity indicating reducing the e-h recombination and enhancing the charge separation, and creation of efficient visible light-harvesting antenna in the range of 400-600 nm. Besides, the QAD/TiO2 sample achieved a 3-fold enhancement in the observed rate constant of the photodegradation of Rhodamine B dye compared to the bare TiO2. The parameters affecting the photodegradation process were optimized and the sample displayed outstanding stability after 4 consecutive cycles. Finally, the effect of the scavengers was investigated and [Formula: see text] was proposed to be the most reactive species and the mechanism of the enhancement was suggested based on the electron injection from the QAD's HOMO level to the TiO2's CB. Finally, this work opens the door for various studies for the investigation of the proposed structures or similar structures in various photocatalytic/biomedical applications.

Engineering S-scheme CuO/ZnO heterojunctions sonochemically for eradicating RhB dye from wastewater under solar radiation

In this research, S-scheme heterojunctions composed of different concentrations of CuO and ZnO nanoparticles are fabricated for eradicating rhodamine B dye under solar radiation. ZnO nanoparticles are designed through a facile sol-gel route employing Triton X-100. Spherical CuO nanoparticles of 15.2 nm and 1.5 eV band gap energy are deposited on ZnO nanoparticles in an ultrasonic bath of 300 W intensity. The physicochemical performance of the photocatalyst is explored by HRTEM, SAED, BET, XRD, DRS and PL. The in situ homogeneous growth of spherical CuO nanoparticles on ZnO active centers shifts the photocatalytic response to the deep visible region and enhances the efficiency of charge carrier separation and transportation. Among all heterojunctions, ZnCu10 containing 10 wt% CuO displays the best photocatalytic rate for expelling 93% of RhB dye within 240 min, which is twenty-fold higher than that of pristine ZnO and CuO. Reactive oxygen species are the predominant species in degrading the dye pollutant on the heterojunction surface, as shown from scrubber trapping experiments and PL spectrum of terephthalic acid. Coupling ZnO as an oxidative photocatalyst and CuO as a reductive photocatalyst generates an efficient S-scheme heterojunction with strong redox power in destructing various organic pollutants.

Engineering S-scheme Ag2CO3/g-c3N4 heterojunctions sonochemically to eradicate Rhodamine B dye under solar irradiation

The use of natural solar radiation is a low-cost significant technology for water pollution remediation and production of clean energy. In this work, S-scheme Ag₂CO₃/g-C₃N₄ heterojunctions were engineered for carefully eradicating Rhodamine B dye under natural sunlight irradiation. Solid thermal decomposition reactions generate g-C₃N₄ sheets by annealing urea at 520 °C. Ag₂CO₃ nanoparticles are directed and localized sonochemically to the active centers of g-C₃N₄ sheets. The physicochemical properties of the solid specimen were determined by PL, DRS, XRD, HRTEM, mapping, EDX, N₂-adsorption-desorption isotherm and XPS analyses. As elucidated by HRTEM, PL and DRS analyses, 5 wt% of spherical Ag₂CO₃ nanoparticles deposited on the g-C₃N₄ sheet surface and nearly equidistant from each other elevate the electron-hole separation efficiency and broaden the absorption capacity of photocatalysts. Rhodamine B dye was degraded at a rate of 0.0141 min^-1 by heterojunctions containing 5 wt% Ag₂CO₃ and 95 wt% g-C₃N₄, which is three-fold higher than that on pristine g-C₃N₄ nanosheets. Free radical scrubber experiments revealed the contribution of charge carriers and reactive oxygen species to the decomposition of RhB dye with a preferential role of positive holes and superoxide species. PL measurements of terephthalic acid and scrubber trapping experiments provide confirmatory evidence for charge diffusion via the S-scheme mechanism that accounts for the production of electron-hole pairs with strong redox power. This novel research work is contributory to manipulate the S-scheme heterojunction for efficient and low-cost wastewater treatment under natural solar irradiation.

Robust visible light active CoNiO2-BiFeO3-NiS ternary nanocomposite for photo-fenton degradation of rhodamine B and methyl orange: Kinetics, degradation pathway and toxicity assessment

Sustainable wastewater treatment is crucial to remediate the water pollutants through the development of highly efficient, low-cost and separation free photocatalyst. The aim of this study is to construct a novel CoNiO₂-BiFeO₃-NiS ternary nanocomposite (NCs) for the efficient degradation of organic pollutants by utilising visible light. The NCs was characterized by various physiochemical techniques, including HR-TEM, SEM, XPS, FT-IR, ESR, EIS, PL, UV-visible DRS, and N₂ adsorption and desorption analysis. The photocatalyst exhibits extraordinary degradation efficiency towards MO (99.8%) and RhB (97.8%). The intermediates were determined using GC-MS analysis and the degradation pathway was elucidated. The complete mineralization was further confirmed by TOC analysis. The CoNiO₂-BiFeO₃-NiS ternary NCs have shown excellent photostability, structural stability and reusability even after six cycles and it is confirmed by XRD and XPS analysis. The kinetic study reveals that the photodegradation of the dyes follows first order reaction. The influence of different pH, dye concentrations and NCs dosages were investigated. The intermediate toxicity was predicted by computational stimulation using ECOSAR software. The NCs shows promising potential for ecological safety which demonstrates its practical application in the treatment of waste water pollutants in large scale.

Effect of Various Forms of Aluminum 6082 on the Mechanical Properties, Microstructure and Surface Modification of the Profile after Extrusion Process

This article presents a method of reusing aluminum scrap from alloy 6082 using the hot extrusion process. Aluminum chips from milling and turning processes, having different sizes and morphologies, were cold pressed into briquettes prior to hot pressing at 400 °C at a ram speed of 2 mm/s. The study of mechanical properties combined with observations of the microstructures, as well as tests of density, hardness and electrical conductivity were carried out. On the basis of the results, the possibility of using the plastic consolidation method and obtaining materials with similar to a solid ingot mechanical properties, density and electrical conductivity was proven. The possibility of modifying the surface of consolidated aluminum scrap was tested in processes examples: polishing, anodizing and coloring. For this purpose, a number of analyses and tests were carried out: comparison of colors on color histograms, roughness determination, SEM and chemical composition analysis. It has been proven there are differences in the surface treatment of the solid material and that of scrap consolidation, and as such, these differences may significantly affect the final quality.

A novel BiVO3/SnO2 step S-scheme nano-heterojunction for an enhanced visible light photocatalytic degradation of amaranth dye and hydrogen production

The destruction of toxic pollutants and production of hydrogen gas on the surface of semiconductors under light irradiation is the main significance of photocatalysis. Heterojunctions with matching in band gap energy are urgently required for enhancing the redox power of the charge carriers. A step S-scheme BiVO₃/SnO₂ nano-heterojunction was carefully synthesized for a successful photodegradation of amaranth dye and photocatalytic hydrogen evolution. Tetragonal SnO₂ nanoparticles of 80 m² g^-1 surface area and distinct mesoporous structure were fabricated by a sol-gel route in the presence of Tween-80 as the pore structure directing agent. BiVO₃ nanoparticles were deposited homogeneously on the SnO₂ surface in an ultrasonic bath of power intensity 300 W. The photocatalytic efficiency in the destruction of amaranth dye soar with increasing BiVO₃ contents of up to 10 wt%. The hydrogen evolution rate reached 8.2 mmol g^-1 h^-1, which is eight times stronger than that of pristine SnO₂. The sonicated nanocomposites were investigated by XRD, BET, FESEM, HRTEM, EDS, DRS and PL techniques. The step S-scheme heterojunction with superior oxidative and reductive power is the primary key for the exceptional photocatalytic process. The PL of terephthalic acid and the scavenger trapping experiments reveal the charge migration through the step S-scheme mechanism rather than the type (II) heterojunction mechanism.

Novel Z-Scheme/Type-II CdS@ZnO/g-C3N4 ternary nanocomposites for the durable photodegradation of organics: Kinetic and mechanistic insights

Visible-light-driven photocatalysis is a green and efficient strategy for wastewater treatment, where graphitic carbon nitride-based semiconductors showed excellent performance in this regard. Consequently, we report on the development of a green and facile one-pot room-temperature ultrasonic route for the preparation of novel ternary nanocomposite of cadmium sulfide quantum dots (CdS QDs), zinc oxide nanoparticles (ZnO NPs), and graphitic carbon nitride nanosheets (g-C₃N₄ NSs). The proposed materials had been characterized by several physicochemical techniques such as PXRD, XPS, FE-SEM, HR-TEM, PL, and DRS. The photocatalytic efficiency of the proposed photocatalysts was assessed towards the photodegradation of Rhodamine B dye as a water pollutant model using spectrophotometric measurements. The as-synthesized novel ternary nanocomposite (CdS@ZnO/g-C₃N₄) exhibited perfect photocatalytic activity, where almost complete degradation was achieved in only 2 h under UV-irradiation or 3 h under visible-irradiation. Various methods were used to elucidate the kinetics of the photocatalytic process. Moreover, CdS@ZnO/g-C₃N₄ exhibited a unique synergetic performance when compared to the corresponding binary composites or the individual components. This synergetic performance could be ascribed to the perfect electronic band configuration of the three components, leading to the establishment of several combined synergetic Z-Scheme/Type-II photocatalytic heterojunctions, which is the proposed mechanism for the observed synergetic photocatalytic reactivity of the as-synthesized CdS@ZnO/g-C₃N₄ nanocomposite when compared to the single and binary nanocomposite counterparts. Furthermore, the effects of both the type and concentration of various scavengers on the photocatalytic activity were assessed to investigate the most reactive species, where the reductive degradation pathway was found to be the predominant route. Finally, the photocatalytic efficiency of the as-synthesized CdS@ZnO/g-C₃N₄ composite showed promising and competing results when compared to other photocatalysts reported in the literature.

High UV and Sunlight Photocatalytic Performance of Porous ZnO Nanostructures Synthesized by a Facile and Fast Microwave Hydrothermal Method

The degradation of organic pollutants in wastewaters assisted by oxide semiconductor nanostructures has been the focus of many research groups over the last decades, along with the synthesis of these nanomaterials by simple, eco-friendly, fast, and cost-effective processes. In this work, porous zinc oxide (ZnO) nanostructures were successfully synthesized via a microwave hydrothermal process. A layered zinc hydroxide carbonate (LZHC) precursor was obtained after 15 min of synthesis and submitted to different calcination temperatures to convert it into porous ZnO nanostructures. The influence of the calcination temperature (300, 500, and 700 °C) on the morphological, structural, and optical properties of the ZnO nanostructureswas investigated. All ZnO samples were tested as photocatalysts in the degradation of rhodamine B (RhB) under UV irradiation and natural sunlight. All samples showed enhanced photocatalytic activity under both light sources, with RhB being practically degraded within 60 min in both situations. The porous ZnO obtained at 700 °C showed the greatest photocatalytic activity due to its high crystallinity, with a degradation rate of 0.091 and 0.084 min^-1 for UV light and sunlight, respectively. These results are a very important step towards the use of oxide semiconductors in the degradation of water pollutants mediated by natural sunlight.

Investigating the UV absorption capabilities in novel Ag@RGO/ZnO ternary nanocomposite for optoelectronic devices

A facile one-pot method was utilized at room-temperature for the synthesis of novel ternary nanocomposite of Ag@RGO/ZnO, which is introduced as a low cost, efficient and reliable UV absorber. The crystalline, morphological, structural, and optical characteristics of the as-synthesized samples were investigated by various techniques such as XRD, FE-SEM, HR-TEM, XPS, and DRS. The measurements confirm the successful fabrication of the Ag@RGO/ZnO ternary nanocomposite. Optical characterization showed the synergetic role of Ag NPs and RGO NSs in the enhancement of the light absorption of the ternary nanocomposite in the UV portion compared to the bare ZnO NPs. Additionally, band-gap narrowing was observed due to the Ag-doping impact where potential applications for the proposed nanocomposite have been suggested.

Novel TiO2/GO/CuFe2O4 nanocomposite: a magnetic, reusable and visible-light-driven photocatalyst for efficient photocatalytic removal of chlorinated pesticides from wastewater

A TiO₂/GO/CuFe₂O₄ heterostructure photocatalyst is fabricated by a simple and low-cost ball-milling pathway for enhancing the photocatalytic degradation of chlorinated pesticides under UV light irradiation. Based on the advantages of graphene oxide, TiO₂, and CuFe₂O₄, the nanocomposite exhibited visible light absorption, magnetic properties, and adsorption capacity. Integrated analyses using XRD, SEM, TEM, and UV-visible techniques demonstrated that the nanocomposite exhibited a well-defined crystalline phase, sizes of 10–15 nm, and evincing a visible light absorption feature with an optical bandgap energy of 2.4 eV. The photocatalytic degradations of 17 different chlorinated pesticides (persistent organic pollutants) were assayed using the prepared photocatalyst. The photocatalytic activity of the nanocomposite generated almost 96.5% photocatalytic removal efficiency of typical pesticide DDE from water under UV irradiation. The superior photocatalytic performance was exhibited by the TiO₂/GO/CuFeO₄ catalyst owing to its high adsorption performance and separation efficiency of photo-generated carriers. The photocatalyst was examined in 5 cycles for treating uncolored pesticides with purposeful separation using an external magnetic field.

A TiO₂/GO/CuFe₂O₄ heterostructure photocatalyst is fabricated by a simple and low cost ball milling pathway for enhancing the photocatalytic degradation of chlorinated pesticides under UV light irradiation.