The remarkably improved filler dispersion and performance of SSBR/BR by core–shell structure SiO2@LDH nanocomposites

Systematic Literature Review of the Effect of Layered Double Hydroxides on the Mechanical Properties of Rubber

Layered double hydroxides (LDHs) have attracted interest as reinforcing fillers in elastomers due to their ease of synthesis and customisability. A systematic review was performed on the effect of LDHs on the mechanical properties of elastomers using the Scopus database. Of the 61 articles relevant to the search criteria, the majority were published on polyurethane (PU) and nitrile butadiene rubber (NBR). Mg-Al LDH was used in most of the studies and Zn-Al LDH was used second most common. LDH can act as a reinforcing filler, typically increasing tensile strength even at low concentrations, so it could be used as an alternative to traditional reinforcing fillers for elastomers. LDH can also be made a functional filler by selecting the right metals and interlayer anions. It was found that Mg-Al LDH and Zn-Al LDH can both participate in crosslinking reactions and can replace MgO and ZnO, respectively. Less Zn ions are required for crosslinking when LDH is used than when ZnO is used, making LDH more environmentally friendly. Organic modification is usually required to improve compatibility with the elastomer matrix, especially in non-polar elastomers. It enables exfoliation of the LDH and intercalation of polymer chains into the LDH interlayer to occur. Organic modifiers can also be used to functionalise the LDH. Stearic acid used in crosslinking systems can be replaced by stearate anions from stearate-modified LDH.

Development of the Morphology and the Band Gap Energy of Co–Si Nanofibers by Inserting Zirconium and Titanium with Dual Anions Intercalation Process

The plate-like structure is the most familiar morphology for conventional layered double hydroxides (LDHs) in case their structures consist of divalent and trivalent cations in their layers. In this study, nanofibers and nanoneedles of Co–Si LDHs were prepared for the first time. By the inclusion of zirconium inside the nanolayers of LDH structures, their plates were formed and transformed to nanofibers. These nanofibers were modified by the insertion of titanium to build again plate-like morphology for the LDH structure. This morphology controlling was studied and explained by a dual anions intercalation process. The optical properties of Co–Si LDHs indicated that the incorporation of zirconium within their nanolayers decreased the band gap energy from 4.4 eV to 2.9 eV. Following the same behavior, the insertion of titanium besides zirconium within the nanolayers of Co–Si LDHs caused a further reduction in the band gap energy, which became 2.85 eV. Although there is no data for the optical properties of Co–Si LDHs in the literature, it is interesting to observe the low band gap energy for Co–Si LDHs to become more suitable for optical applications. These results concluded that the reduction of the band gap energy and the formation of nanofibers introduce new optical materials for developing and designing optical nanodevices.