Preparation and characterization of dopamine–sodium carboxymethyl cellulose hydrogel

Development of a tomato xylem-mimicking microfluidic system to study Ralstonia pseudosolanacearum biofilm formation

The bacterial wilt pathogen Ralstonia pseudosolanacearum (Rps) colonizes plant xylem vessels and blocks the flow of xylem sap by its biofilm (comprising of bacterial cells and extracellular material), resulting in devastating wilt disease across many economically important host plants including tomatoes. The technical challenges of imaging the xylem environment, along with the use of artificial cell culture plates and media in existing in vitro systems, limit the understanding of Rps biofilm formation and its infection dynamics. In this study, we designed and built a microfluidic system that mimicked the physical and chemical conditions of the tomato xylem vessels, and allowed us to dissect Rps responses to different xylem-like conditions. The system, incorporating functional surface coatings of carboxymethyl cellulose-dopamine, provided a bioactive environment that significantly enhanced Rps attachment and biofilm formation in the presence of tomato xylem sap. Using computational approaches, we confirmed that Rps experienced linear increasing drag forces in xylem-mimicking channels at higher flow rates. Consistently, attachment and biofilm assays conducted in our microfluidic system revealed that both seeding time and flow rates were critical for bacterial adhesion to surface and biofilm formation inside the channels. These findings provided insights into the Rps attachment and biofilm formation processes, contributing to a better understanding of plant-pathogen interactions during wilt disease development.

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

A Novel Nanofiber Hydrogel Adhesive Based on Carboxymethyl Cellulose Modified by Adenine and Thymine

Natural polymer-based adhesive hydrogels have garnered significant interest for their outstanding strength and versatile applications, in addition to being eco-friendly. However, the adhesive capabilities of purely natural products are suboptimal, which hampers their practical use. To address this, we engineered carboxymethyl cellulose (CMC) surfaces with complementary bases, adenine (A) and thymine (T), to facilitate the self-assembly of adhesive hydrogels (CMC-AT) with a nanofiber configuration. Impressively, the shear adhesive strength reached up to 6.49 MPa with a mere 2% adhesive concentration. Building upon this innovation, we conducted a comparative analysis of the shear adhesion properties between CMC and CMC-AT hydrogel adhesives when applied to delignified and non-delignified wood chips. We examined the interplay between the adhesives and the substrate, as well as the role of mechanical interlocking in overall adhesion performance. Our findings offer a fresh perspective on the development of new biodegradable polymer hydrogel adhesives.

Rehabilitation exercise-driven symbiotic electrical stimulation system accelerating bone regeneration

Electrical stimulation can effectively accelerate bone healing. However, the substantial size and weight of electrical stimulation devices result in reduced patient benefits and compliance. It remains a challenge to establish a flexible and lightweight implantable microelectronic stimulator for bone regeneration. Here, we use self-powered technology to develop an electric pulse stimulator without circuits and batteries, which removes the problems of weight, volume, and necessary rigid packaging. The fully implantable bone defect electrical stimulation (BD-ES) system combines a hybrid tribo/piezoelectric nanogenerator to provide biphasic electric pulses in response to rehabilitation exercise with a conductive bioactive hydrogel. BD-ES can enhance multiple osteogenesis-related biological processes, including calcium ion import and osteogenic differentiation. In a rat model of critical-sized femoral defects, the bone defect was reversed by electrical stimulation therapy with BD-ES and subsequent bone mineralization, and the femur completely healed within 6 weeks. This work is expected to advance the development of symbiotic electrical stimulation therapy devices without batteries and circuits.

Rheological insights on Carboxymethyl cellulose hydrogels

Hydrogels are copiously studied for tissue engineering, drug delivery, and bone regeneration owing to their water content, mechanical strength, and elastic behaviour. The preparation of stable and mechanically strengthened hydrogels without using toxic crosslinkers and expensive approaches is immensely challenging. In this study, we prepared Carboxymethyl cellulose based hydrogels with different polymer concentration via a less expensive physical crosslinking approach without using any toxic crosslinkers and evaluated their mechanical strength. In this hydrogel system, the carbopol concentration was fixed at 1 wt/v% and the Carboxymethyl cellulose concentration was varied between 1 and 5 wt/v%. In this hydrogel system, Carbopol serves as the crosslinker to bridge Carboxymethyl cellulose polymer through hydrogen bonds. Rheological analysis was employed in assessing the mechanical properties of the prepared hydrogel, in particular, the viscoelastic behaviour of the hydrogels. The viscoelastic nature and mechanical strength of the hydrogels increased with an increase in the Carboxymethyl cellulose polymer concentration. Further, our results suggested that gels with Carboxymethyl cellulose concentration between 3 wt/v % and 4 wt/v % with yield stresses of 58.83 Pa and 81.47 Pa, respectively, are potential candidates for use in transdermal drug delivery. The prepared hydrogels possessed high thermal stability and retained their gel network structure even at 50 °C. These findings are beneficial for biomedical applications in transdermal drug delivery and tissue engineering owing to the biocompatibility, stability, and mechanical strength of the prepared hydrogels.

In silico and in vitro investigation of the antifungal activity of trimetallic Cu-Zn-magnetic nanoparticles against Fusarium oxysporum with stimulation of the tomato plant's drought stress tolerance response

Fusarium oxysporum is the fungus responsible for Fusarium wilt. Tomatoes and other plants acquire Fusarium wilt through their root systems. Occasionally, fungicides applied to the soil are used to combat the disease; however, some strains have developed resistance. Carboxymethyl cellulose (CMC) trimetallic magnetic zinc and copper nanoparticles CMC-Cu-Zn-FeMNPs are one of the most promising antifungal agents against a wide range of fungi. One of the most important aspects of using magnetic nanoparticles is their ability to target cells, which confirms the drug's potent fungicidal activity. Using a UV-spectrophotometer, the characterization of synthesized CMC-Cu-Zn-FeMNPs revealed four peaks at226,271, 321 and 335 nm, as well as spherical nanoparticles with a mean size of 5.905 nm and a surface potential of -61.7 mv. In this study, CMC-Cu-Zn-FeMNPs were used to inhibit the growth of F. oxysporum by interfering with the ergosterol production metabolic pathway. Molecular docking experiments demonstrated that the nanoparticles were able to bind to sterol 14-alpha demethylase responsible for inhibiting ergosterol biosynthesis. Real-time PCR analysis showed that the nanoparticles upregulated tomato plants and other assessed parameters under drought stress and downregulated the velvet complex and virulence factors of F. oxysporum on plants. The study results indicate that CMC-Cu-Zn-FeMNPs may be a promising and eco-friendly solution with low potential of accumulation and easy to collected alternative to conventional chemical pesticides that can have negative impacts on the environment and human health. Furthermore, it could provide a sustainable solution for managing Fusarium wilt disease, which can significantly reduce tomato yield and quality.

Preparation and characterization of mussel-inspired hydrogels based on methacrylated catechol-chitosan and dopamine methacrylamide

A novel mussel-inspired adhesive hydrogel with enhanced adhesion based on methacrylated catechol-chitosan (MCCS) and dopamine methacrylate (DMA) was prepared via photopolymerization. The structure and morphology of the MCCS/DMA adhesive hydrogel were investigated by using FTIR, NMR, XRD, TG, and SEM. The rheological and texture properties, swelling and degradation characteristics, as well as the adhesion mechanism of the hydrogels were also examined. These results revealed that the MCCS/DMA hydrogels have a dense double cross-linking network structure with porous internal microstructures, and exhibited controllable swelling and degradation properties, good thermostability, and stable rheological characteristics. Furthermore, the adhesive mechanism of MCCS/DMA hydrogel has been confirmed by the FTIR and 2D correlation FTIR spectroscopy. Additionally, the results of in vitro cytotoxicity assessment indicated that the resulting hydrogels have good cytocompatibility. Overall, the MCCS/DMA adhesive hydrogel may have potential applications in medical bioadhesives.

Boosting Tadalafil Bioavailability via Sono-Assisted Nano-Emulsion-Based Oral Jellies: Box-Behnken Optimization and Assessment

Tadalafil (TAD) is a poorly soluble, phosphodiesterase inhibitor used to treat erectile dysfunction. The primary goal of this project was to prepare nano-emulsions using ultrasonic technology to address TAD bioavailability concerns. The Box−Behnken design was employed to find prominent correlations between factors impacting the sono-emulsification process. The emulsifier concentration, amplitude level, and ultrasonication time were the independent factors, whereas the average droplet size (ADS) and polydispersity index (PDI) were designated as the response variables. TAD-loaded nano-emulsions (93−289 nm) were generated and the emulsifier concentration showed a crucial role in directing emulsion droplet size. The model desirability function was utilized to optimize a nano-emulsion with a small ADS (99.67 ± 7.55 nm) and PDI (0.45 ± 0.04) by adjusting the emulsifiers concentration, amplitude level, and ultrasonication time at 9.85%, 33%, 49 s, respectively. The optimized nano-emulsions did not demonstrate any precipitation or phase separation after stability stress tests. TAD jellies were formulated based on the optimized nano-emulsion and subjected to in vitro evaluation for physical characteristics; TAD content, pH, spreadability, viscosity, syneresis, and taste-masking ability. An optimized nano-emulsion-based jelly (NEJ) formulation showed more than 96% drug dissolution in 30 min relative to 14% for the unprocessed TAD. In vivo assessment of NEJ in experimental rats demonstrated a significant enhancement (p < 0.05) of TAD bioavailability with an AUC0−24h of 2045 ± 70.2 vs. 259.9 ± 17.7 ng·h·mL−1 for the unprocessed TAD. Storage stability results revealed that NEJ remained stable with unremarkable changes in properties for 3 months. Overall, NEJ can be regarded as a successful therapeutic option for TAD administration with immediate-release properties and improved bioavailability.

Hemostatic Cryogels Based on Oxidized Pullulan/Dopamine with Potential Use as Wound Dressings

The impetus for research into hydrogels based on selectively oxidized polysaccharides has been stimulated by the diversity of potential biomedical applications. Towards the development of a hemostatic wound dressing in this study, we creatively combined the (hemi)acetal and Schiff base bonds to prepare a series of multifunctional cryogels based on dialdehyde pullulan and dopamine. The designed structures were verified by NMR and FTIR spectroscopy. Network parameters and dynamic sorption studies were correlated with environmental scanning microscopy results, thus confirming the successful integration of the two components and the opportunities for finely tuning the structure-properties balance. The viscoelastic parameters (storage and loss moduli, complex and apparent viscosities, zero shear viscosity, yield stress) and the structural recovery capacity after applying a large deformation were determined and discussed. The mechanical stability and hemostatic activity suggest that the optimal combination of selectively oxidized pullulan and dopamine can be a promising toolkit for wound management.

Preparation of robust and fully bio-based modified paper via mussel-inspired layer-by-layer assembly of chitosan and carboxymethyl cellulose for food packaging

A green and facile method was proposed to prepare robust and fully bio-based modified paper in this study, which involved in layer-by-layer deposition of chitosan (CS) and mussel adhesive protein-mimetic polymer (dopamine-grafted carboxymethyl cellulose, CMC-g-DA) on paper surface and subsequent oxidative cross-linking by sodium periodate. The mechanical, barrier and antibacterial properties of the cross-linked multilayer-modified paper significantly improved with the increased bilayer numbers. Compared with unmodified paper, cross-linked (CS/CMC-g-DA)₆ multilayer-modified paper exhibited 71.6 % improvement in tensile strength, 69.2 % and 56.3 % decline in air and water vapor permeability, as well as above 90 % antibacterial efficiency against S. aureus and E. coli. Particularly, the cross-linked multilayer-modified paper maintained outstanding functional stability even after suffering from vigorously corrosive treatment. The obtained functional paper effectively extended the shelf-life of Agaricus bisporus to 6 days under ambient conditions. We believed that the prepared robust functional paper in this study will have promising application prospect in food packaging field.

Rationally designed carboxymethylcellulose-based sorbents crosslinked by targeted ions for static and dynamic capture of heavy metals: Easy recovery and affinity mechanism

A separable spherical bio-adsorbent (CMC-Cr) was prepared for capturing heavy metal ions by simple coordination and cross-linking between targeted ions of Cr³⁺ and carboxymethyl cellulose (CMC). A simple alternation of the CMC incorporation allowed the interconnected networks within the microspheres of preformed solid CMC to be adjusted. The excellent network structure could achieve the maximum collision between the adsorbent and the heavy metal cations in the wastewater. Through investigations, CMC-Cr-2 beads were determined as the optimal adsorbent. The adsorption performance of novel materials was evaluated by examining their adsorption behavior on Pb(II) and Co(II) under both static and dynamic conditions. The results showed that the adsorption behavior of CMC-Cr-2 beads on both two heavy metal cations could be fully reflected by the Freundlich model. Under the theoretical conditions, the maximum adsorption capacities were 97.26 and 144.74 mg/g. The kinetic results for the adsorption of two heavy metal cations on CMC-Cr-2 beads were consistent with the Pseudo-second-order kinetic model. Moreover, the correlation coefficient of the Thomas model was significant in the dynamic adsorption performance tests. Five regeneration cycle studies were successfully carried out on CMC-Cr-2 beads to evaluate reusability and stability. The applicability of CMC-Cr-2 beads in authentic aqueous solutions (both the single and binary pollutant systems) was also studied, and the results indicated that CMC-Cr-2 beads had a high potential for practical implementation. Furthermore, by analyzing the surface interactions of two heavy metal cations with the CMC-Cr-2 beads based on FTIR and XPS characterization, a basic understanding of the interaction between bio-sorbents and pollutants in wastewater can be obtained.

Artificial Nonenzymatic Antioxidant MXene Nanosheet-Anchored Injectable Hydrogel as a Mild Photothermal-Controlled Oxygen Release Platform for Diabetic Wound Healing

Hypoxia, excessive reactive oxygen species (ROS), impaired angiogenesis, lasting inflammation, and bacterial infection, are key problems impeding diabetic wound healing. Particularly, controllable oxygen release and ROS scavenging capacities are critical during the wound healing process. Here, an injectable hydrogel based on hyaluronic acid-graft-dopamine (HA-DA) and polydopamine (PDA) coated Ti₃C₂ MXene nanosheets is developed catalytically cross-linked by an oxyhemoglobin/hydrogen (HbO₂/H₂O₂) system combined with mild photothermal stimulation for diabetic wound healing. HbO₂ not only acts as a horseradish peroxidase-like to catalyze the hydrogel formation but also as an oxygen carrier to controllably release oxygen when activated by the mild heat produced from near-infrared (NIR) irradiation. Specifically, HbO₂ can provide oxygen repeatedly by binding oxygen in the air when the NIR is off. The stable photoresponsive heating behavior of MXene ensures the repeatable oxygen release. Additionally, artificial nonenzymatic antioxidant MXene nanosheets are proposed to scavenge excessive reactive nitrogen species and ROS including H₂O₂, O₂^•-, and ^•OH, keeping the intracellular redox homeostasis and alleviating oxidative stress, and eradicate bacteria to avoid infection. The antioxidant and antibacterial abilities of MXene are further improved by PDA coating, which also promotes the MXene nanosheets cross-linking into the network of the hydrogel. HA-DA molecules endow the hydrogel with the capacity to regulate macrophage polarization from M1 to M2 to achieve anti-inflammation. More importantly, the MXene-anchored hydrogel with multifunctions including tissue adhesion, self-healing, injectability, and hemostasis, combined with mild photothermal stimulation, greatly promotes human umbilical vein endothelial cell proliferation and migration and notably facilitates infected diabetic wound healing.

Efficient Antimicrobial Effect of Alginate-Catechol/Fe2+ Coating on Hydroxyapatite toward Oral Care Application

Reducing the formation of oral bacterial biofilms is critical to prevent common dental diseases. Though many strategies for restricting bacterial adhesion on tooth surfaces have been reported, a simple method for efficient oral bacteriostasis is still highly expected. Herein, we have proved a soft gel made of an alginate-catechol conjugate (SA-DA) and the ferrous cation (Fe²⁺) as an effective antibacterial coating on hydroxyapatite (HAP, a tooth model). As suggested by quartz crystal microbalance (QCM) measurements, SA-DA/Fe²⁺ coating possessed a high binding affinity to HAP without destruction by either immersion in artificial saliva or simulated tooth brushing. Significantly less protein (bovine serum albumin) and Streptococcus mutans (S. mutans, an oral bacterial model) could be found on HAP after coating with SA-DA/Fe²⁺, indicating that the prepared gel could resist well the adhesion of biofouling and microbes due to its hydrophilicity. Notably, such an antibacterial effect (around 70% S. mutans was inhibited) could be maintained for 3 d, which resulted from the extremely good stability of SA-DA/Fe²⁺ coating, as confirmed by QCM analysis. Our results may offer possibilities for developing applications in order to further improve oral hygiene.

Oxidation triggered formation of polydopamine-modified carboxymethyl cellulose hydrogel for anti-recurrence of tumor

In this research, a hydrogel that combined the tumor photodynamic therapy (PDT) and photothermal therapy (PTT) ability was designed, using dopamine-modified sodium carboxymethyl cellulose (CMC-DA) as the matrix and Chlorin e6 (Ce6) as the photosensitizer. The gel formation was initiated by adding the oxidizing agent sodium periodate (NaIO₄) to the CMC-DA solution, during which the dopamine was simultaneously oxidized to polydopamine (PDA) and NaIO₄ was reduced to sodium iodide (NaI). The formed NaI was encapsulated in the hydrogel and endowed the hydrogel with computerized tomography (CT) imaging ability to monitor the hydrogel degradation and the tumor therapy process. Moreover, the photosensitizer Ce6 can be loaded by the gel system via directly soaking the hydrogel in the Ce6 solution. Under the near-infrared light irradiation, Ce6 can produce cytotoxic reactive oxygen species and the PDA can produce heat to trigger the tumor PDT and PTT respectively to eradicate the tumor recurrence. In general, the designed hydrogel is biocompatible and biodegradable, has a good photothermal conversion, drug loading and CT imaging ability, which laid the foundation for the rational design of biodegradable hydrogels for multifunctional applications.

Preparation and Characterization of Hydroxyapatite Coating on AZ31 Magnesium Alloy Induced by Carboxymethyl Cellulose-Dopamine

Magnesium and its alloys have become potential implant materials in the future because of light weight, mechanical properties similar to natural bone, good biocompatibility, and degradability in physiological environment. However, due to the rapid corrosion and degradation of magnesium alloys in vivo, especially in the environment containing chloride ions, the application of magnesium alloys as implant materials has been limited. Therefore, improving the corrosion resistance of magnesium alloy and ensuring good biocompatibility is the main focus of the current research. In this study, hydroxyapatite coating was prepared on magnesium alloy surface using carboxymethyl cellulose-dopamine hydrogel as inducer to improve corrosion resistance and biocompatibility. Surface characterization techniques (scanning electron microscopy, Fourier-transformed infrared spectroscopy, energy dispersive X-ray spectroscopy- and X-ray diffraction) confirmed the formation of hydroxyapatite on the surface of AZ31 alloy. Corrosion resistance tests have proved the protective effect of Carboxymethyl cellulose-Dopamine/hydroxyapatite (CMC-DA/HA) coating on the surface of AZ31 alloy. According to MC3T3-E1 cell viability and Live/Dead staining, the coating also showed good biocompatibility. The results will provide new ideas for the biological application of magnesium alloys.

Recent advances in composites based on cellulose derivatives for biomedical applications

Cellulose derivatives represent a viable alternative to pure cellulose due to their solubility in water and common organic solvents. This, coupled with their low cost, biocompatibility, and biodegradability, makes them an attractive choice for applications related to the biomedicine and bioanalysis area. Cellulose derivatives-based composites with improved properties were researched as films and membranes for osseointegration, hemodialysis and biosensors, smart textile fibers, tissue engineering scaffolds, hydrogels and nanoparticles for drug delivery. The different preparation strategies of these polymeric composites as well as the most recent available experimental results were described in this review. General aspects such as structure and properties of cellulose extracted from plants or bacterial sources, types of cellulose derivatives and their synthesis methods were also discussed. Finally, the future perspectives related to composites based on cellulose derivatives were highlighted and some conclusions regarding the reviewed applications were drawn.

Recent Advances in Applications of Cellulose Derivatives-Based Composite Membranes with Hydroxyapatite

The development of novel polymeric composites based on cellulose derivatives and hydroxyapatite represents a fascinating and challenging research topic in membranes science and technology. Cellulose-based materials are a viable alternative to synthetic polymers due to their favorable physico-chemical and biological characteristics. They are also an appropriate organic matrix for the incorporation of hydroxyapatite particles, inter and intramolecular hydrogen bonds, as well as electrostatic interactions being formed between the functional groups on the polymeric chains surface and the inorganic filler. The current review presents an overview on the main application fields of cellulose derivatives/hydroxyapatite composite membranes. Considering the versatility of hydroxyapatite particles, the hybrid materials offer favorable prospects for applications in water purification, tissue engineering, drug delivery, and hemodialysis. The preparation technique and the chemical composition have a big influence on the final membrane properties. The well-established membrane fabrication methods such as phase inversion, electrospinning, or gradual electrostatic assembly are discussed, together with the various strategies employed to obtain a homogenous dispersion of the inorganic particles in the polymeric matrix. Finally, the main conclusions and the future directions regarding the preparation and applications of cellulose derivatives/hydroxyapatite composite membranes are presented.