Ecotoxicity evaluation towards Vibrio fischeri of imidazolium- and pyridinium-based ionic liquids for their use in separation processes

The effects of the IM1-12Br ionic liquid and the oxytetracycline mixture on selected marine and brackish microorganisms

The number of applications and commercialized processes utilizing ionic liquids has been increasing, and it is anticipated that this trend will persist and even intensify in the future. Ionic liquids possess desirable characteristics, such as low vapor pressure, good water solubility, amphiphilicity, and stability. Nevertheless, these properties can influence their environmental behavior, resulting in resistance to biotic and abiotic degradation and subsequent water contamination with more harmful derivatives. However, there is a notable scarcity of data regarding the impact of mixtures comprising ionic liquids and other micropollutants. Identifying potential potentiation of ionic liquids (Ils) toxicity in the presence of other xenobiotics is a proactive risk assessment measure. Therefore, the study aims to fill an important knowledge gap and identify possible interactions between imidazolium-based ionic liquid (IM1-12Br) and the common antibiotic oxytetracycline (OXTC). During 11-day experiments, selected marine, brackish and freshwater microorganisms (diatom Phaeodactylum tricornutum, cyanobacterium Microcystis aeruginosa and green algae Chlorella vulgaris) were exposed to binary mixtures of target substances. The assessed responses encompassed chlorophyll a kinetic parameters related to photosynthesis efficiency, as well as pigment concentrations, specifically phycobilin content. Additionally, the impact on the luminescent marine bacterium Aliivibrio fischeri has been evaluated. Significant effects on the growth, photosynthetic processes, and pigment content were observed in all the targeted microorganisms. The concentration addition (CA) and independent action (IA) mathematical models followed by the Model Deviation Ratio (MDR) evaluation enabled the identification of mainly synergistic interactions in the studied mixtures. The findings of present study offer valuable insights into the impacts of ionic liquids and other organic micropollutants.

Synthesis of New Hydrogels Involving Acrylic Acid and Acrylamide Grafted Agar-Agar and Their Application in the Removal of Cationic Dyes from Wastewater

Polyacrylic Acid grafted Agar-agar (AAc-graf-Agar), and polyacrylamide grafted Agar-Agar (AAm-graf-Agar) have been synthesised by free radical polymerisation route initiated by ammonium peroxodisulphate (APS), the grafted polymers were characterised by FTIR, TGA and SEM methods. The swelling properties were studied in deionised water and saline solution at room temperature. The prepared hydrogels were examined by removing cationic methylene blue (MB) dye from the aqueous solution, in which the adsorption kinetics and isotherms models were also investigated. It was found that the pseudo-second-order and Langmuir equations are the most suitable for the different sorption processes. The maximum dye adsorption capacity was 1035.96 mg∙g^-1 for AAc-graf-Agar in pH medium 12 and 1015.7 mg∙g^-1 for AAm-graf-Agar in neutral pH medium. This indicates that the AAc-graf-Agar hydrogel could be an excellent adsorbent for removing MB from aqueous solutions.

Mechanochemical Synthesized CaO/ZnCo2O4 Nanocomposites for Biodiesel Production

Biodiesel has been recognized as an environmentally friendly, renewable alternative to fossil fuels. In this work, CaO/ZnCo2O4 nanocomposites were successfully synthesized via simple mechanochemical reaction between ZnCo2O4 and CaO powders by varying the CaO loading from 5 to 20 wt.%. The synthesized materials were found to be highly efficient heterogeneous catalysts for transesterification of tributyrin with methanol to produce biodiesel. The nanocomposite, which contained 20 wt.% CaO and 80 wt.% ZnCo2O4 (CaO/ZnCo2O4-20), exhibited superior and stable transesterification activity (98% conversion) under optimized reaction conditions (1:12 TBT to methanol molar ratio, 5 wt.% catalyst and 180 min. reaction time). The experimental results revealed that the reaction mechanism on the CaO/ZnCo2O4 composite followed pseudo first-order kinetics. The physicochemical characteristics of the synthesized nanocomposites were measured using X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Fourier-transformed infrared spectroscopy (FTIR), X-ray photoelectron spectrometer (XPS), N2-physisorption, and CO2- temperature-programmed desorption (CO2-TPD) techniques. The results indicated the existence of coalescence between the CaO and ZnCo2O4 particles, Additionally, the CaO/ZnCo2O4-20 catalyst was found to possess the greater number of highly basic sites and high porosity, which are the key factors affecting catalytic performance in transesterification reactions.

Toxicity of ionic liquids in marine and freshwater microorganisms and invertebrates: state of the art

The variety of applications and expected growth in ionic liquid production are raising concerns about the release of these compounds into aquatic systems. Up to date, 103 studies have provided ecotoxicological data regarding the exposure effects of Ionic Liquids towards aquatic microorganisms and invertebrate species: 61 were devoted to freshwater species (n = 28), while marine species (n = 12) were mentioned in 42. The aim of this review, by gathering published studies on ionic liquids and model aquatic organisms, was to present the toxic effects described in distinct species and to understand which are the main factors influencing the toxicity of some ionic liquids. In accordance with the most recognized pattern, freshwater species were featured in a higher number of publications than marine ones. After literature analysis, algal species were the most represented organisms in aquatic toxicity assessments. Among tested compounds, the imidazolium cations in combination with long alkyl-chain anions, showed to be the most toxic one. In analytical terms, it is not straightforward to find the undissociated compound in a natural compartment, as ionic liquids are composed of ionic components, easily subjected to dissociation. Given the aforementioned, the present review paper points out the need of increasing the number of organisms being assessed in ionic liquids toxicity assays, in order to start defining monitoring procedures. Moreover, such would allow a better understanding of ionic liquids contamination status and, also, the opportunity to remark the effectiveness of new in silico methods for the ecotoxicity assessment of this kind of substances.

Role of Fungi in Biodegradation of Imidazolium Ionic Liquids by Activated Sewage Sludge

Ionic liquids (ILs), due to their specific properties, can play the role of persistent water contaminants. Fungi manifest the ability to decompose hardy degradable compounds, showing potential in the biodegradation of ILs, which has been studied extensively on sewage sludge; however, attention was drawn mainly to bacterial and not fungal species. The aim of the research was to determine the significance of fungi in ILs' biodegradation to extend the knowledge and possibly point out ways of increasing their role in this process. The research included: the isolation and genetic identification of fungal strains potentially capable of [OMIM][Cl], [BMIM][Cl], [OMIM][Tf₂N], and [BMIM][Tf₂N] degradation, adjustment of the ILs concentration for biodegradability test by MICs determination and choosing strains with the highest biological robustness; inoculum adaptation tests, and finally primary biodegradation by OECD 301F test. The study, conducted for 2 mM [OMIM][Cl] as a tested substance and consortium of microorganisms as inoculum, resulted in an average 64.93% biodegradation rate within a 28-day testing period. For the individual fungal strain (Candida tropicalis), the maximum of only 4.89% biodegradation rate was reached in 10 days, then inhibited. Insight into the role of fungi in the biodegradation of ILs was obtained, enabling the creation of a complex overview of ILs toxicity and the possibilities of its biological use. However, only an inoculum consisting of a consortium of microorganisms enriched with a selected strain of fungi was able to decompose the IL, in contrast to that consisting only of an individual fungal strain.

Effects of pyridinium-based ionic liquids with different alkyl chain lengths on the growth of maize seedlings

The effects of four water-soluble pyridinium-based ionic liquids (ILs) differing in alkyl side chain length, namely, N-ethyl pyridinium bromide ([EPy]Br), N-butyl pyridinium bromide ([BPy]Br), N-hexyl pyridinium bromide ([HPy]Br), and N-octyl pyridinium bromide ([OPy]Br), on the growth of maize seedlings were investigated for the first time. The results revealed that the phytotoxicity of these ILs was significantly correlated with their concentration and alkyl side chain length. The 8-day 50% inhibition values indicated that the toxicity increased as the length of the alkyl chain increased: [EPy]Br < [BPy]Br < [HPy]Br < [OPy]Br. In addition, root growth was found to be more sensitive to ILs than stem growth. In response to exposure to ILs of increasing concentration, we observed different trends in the pigment contents and specific antioxidant enzyme activities in maize seedlings, whereas the contents of malondialdehyde were significantly increased. In addition, RNA sequencing analysis, performed to examine the gene expression profiles of maize leaves under [HPy]Br and [OPy]Br treatments, revealed that a larger number of genes were differentially expressed in response to [OPy]Br treatment. Furthermore, pathway enrichment analysis revealed that both [HPy]Br and [OPy]Br treatments, and particularly the latter, caused a down-regulation of genes involved in photosynthesis and carbohydrate and nitrogen metabolism. Our findings thus indicate that pyridinium-based IL toxicity might be associated with oxidative stress and changes in gene expression profiles.

Ecotoxicity of binary mixtures of ILs and inorganic salts of electrochemical interest

The applicability of ionic liquids (ILs) has increased over the last years, and even new opportunities are becoming a reality, i.e. mixtures of pure IL and inorganic salt as electrolytes for smart electrochemical devices, yet the effects on the environment are almost unknown. In this work, the ecotoxicity of two pure protic ILs (Ethylammonium nitrate and Ethylimidazolium nitrate) and two pure aprotic ILs (butylmethylpyrrolidinium bis(trifluoromethylsulfonyl)imide and butyldimethylimidazolium bis(trifluoromethylsulfonyl)imide) and that of their binary mixtures with inorganic salts with common cation was tested towards changes in the bioluminescence of the bacteria Aliivibrio fischeri, using the Microtox® standard toxicity test. EC₅₀ of these mixtures was determined over three standard periods of time and compared with the corresponding values to pure ILs. Results indicate that the aprotic ILs are more toxic than protic and that aromatic are more toxic than non-aromatic. The addition of inorganic mono (LiNO₃), di (Ca(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O) and trivalent (Al(NO₃)₃·9H₂O) salts in binary mixtures with EAN was analysed first. The latter was found to induce an important increase in toxicity. Finally, mixtures of IL-inorganic lithium salt (LiNO₃, for the protic ILs and LiTFSI for the aprotic ILs) toxicity was also studied, which showed toxicity levels strongly dependent on the IL of the mixture.

Deep Eutectic Solvents: Are They Safe?

Deep eutectic solvents (DESs) are a relatively new type of solvent that have attracted the attention of the scientific community due to their environmentally friendly properties and their versatility in many applications. Many possible DESs have been described and, thus, it is not easy to unequivocally characterize and generalize their properties. This is especially important in the case of the (eco)toxicity information that can be found for these mixtures. In this review, we collect data on the human and environmental toxicity of DESs, with the aim of gathering and exploring the behavioral patterns of DESs. The toxicity data found were analyzed attending to different factors: hydrogen bond donors or acceptors that form part of the eutectic mixture, pH, and the presence of organic acids in the DES molar ratio of the components, or interactions with natural compounds. In the case of ecotoxicity, results generally depend on the biomodel studied, along with other factors that have been also revised. Finally, we also carried out a revision of the biodegradation of DESs.

Review of the toxic effects of ionic liquids

Interest in ionic liquids (ILs), called green or designer solvents, has been increasing because of their excellent properties such as thermal stability and low vapor pressure; thus, they can replace harmful organic chemicals and help several industrial fields e.g., energy-storage materials production and biomaterial pretreatment. However, the claim that ILs are green solvents should be carefully considered from an environmental perspective. ILs, given their minimal vapor pressure, may not directly cause atmospheric pollution. However, they have the potential to cause adverse effects if leaked into the environment, for instance if they are spilled due to human mistakes or technical errors. To estimate the risks of ILs, numerous ILs have had their toxicity assessed toward several micro- and macro-organisms over the past few decades. Since the toxic effects of ILs depend on the method of estimating toxicity, it is necessary to briefly summarize and comprehensively discuss the biological effects of ILs according to their structure and toxicity testing levels. This can help simplify our understanding of the toxicity of ILs. Therefore, in this review, we discuss the key findings of toxicological information of ILs, collect some toxicity data of ILs to different species, and explain the influence of IL structure on their toxic properties. In the discussion, we estimated two different sensitivity values of toxicity testing levels depending on the experiment condition, which are theoretical magnitudes of the inherent sensitivity of toxicity testing levels in various conditions and their changes in biological response according to the change in IL structure. Finally, some perspectives, future research directions, and limitations to toxicological research of ILs, presented so far, are discussed.

Cumulative impact assessment of hazardous ionic liquids towards aquatic species using risk assessment methods

In the present research work, a comprehensive tool for cumulative ecotoxicological impact assessment of ionic liquids (ILs) to aquatic life has been constructed. Using the probabilistic tool, impact of individual ILs to a group of aquatic species is assessed by chemical toxicity distributions (CTDs). The impact of group of ILs to individual aquatic species is assessed by species sensitivity distributions (SSDs). Acute toxicity data of imidazolium ILs with chloride (Cl^-), bromide (Br^-), tetrafluoroborate (BF4^-), and hexafluorophosphate (PF6^-) anions are used in CTD and SSD. Allowable concentrations for a group of Imidazolium ILs with the same mode of action (SMOA) to five aquatic species; Daphnia magna, Vibrio fischeri, Algae, Zebrafish, and Escherichia coli are estimated by CTDs. It has been concluded that 1-Butyl-3-methylimidazolium chloride (BMIMCl) possess the lowest risk at an acceptable risk value of 750 × 10^-5 mmol/L which is 12% less than that of OMIMCl. Furthermore, the sensitivities towards the aquatic species reveal that from the studied ILs, BMIMBF4 with an acceptable risk value of 3200 × 10^-5 mmol/L is the most suitable IL towards the selected aquatic species. Hence, current work provides cumulative allowable concentrations and acceptable risk values for ILs which release to aquatic compartment of ecosystem.

Evaluating the hazardous impact of ionic liquids - Challenges and opportunities

Ionic liquids (ILs), being related to the design of new environmentally friendly solvents, are widely considered for applications within the "green chemistry" concept. Due to their unique properties and wide diversity, ILs allow tailoring new separation procedures and producing new materials for advanced applications. However, despite the promising technical performance, environmental concerns highlighted in recent studies focused on the toxicity and biodegradability of ILs and their metabolites have revealed that ILs safety labels are not as benign as previously claimed. This review refers to the fundamentals about the properties and applications of ILs also in the context of their potential environmental effect. Toxicological issues and harmful effects related to the use of ILs are discussed, including the evaluation of their biodegradability and ecological impact on diverse organisms and ecosystems, also with respect to bacteria, fungi, and cell cultures. In addition, this review covers the tools used to assess the toxicity of ILs, including the predictive computational models and the results of studies involving cell membrane models and molecular simulations. Summing up the knowledge available so far, there are still no reliable criteria for unequivocal attribution of toxicity and environmental impact credentials for ILs, which is a challenging research task.

Norm index in QSTR work for predicting toxicity of ionic liquids on Vibrio fischeri

Ionic liquids have been becoming new 'green solvent' because of the low saturation vapor pressure, less volatilization and more recycling utilization. Since most ILs are soluble in water, it should be indispensable to evaluate the ecotoxicology effect of ILs on aquatic environment before using them widely. Based on the concept of norm index, a set of norm descriptors were proposed for anions, cations and ILs. The whole IL structure optimization method has been used to build a predictive norm index-based quantitative structure-toxicity relationship model for the toxicity of ILs on Vibrio fischeri. Statistical results indicated that norm descriptors were reliable and robust in expressing the relationship between structural information and toxicity of ILs. Meanwhile, a series of ILs without experimental values were predicted based on this stable QSTR model. The results indicated that for imidazole-based ILs, an increase in the length of substituent in the branch could enhance the toxicity of ILs on Vibrio fischeri, and the branch contains hydroxyl group, double bond or triple bonds might reduce the toxicity of ILs. Results obtained in this present work would be valuable for the molecular design and the toxicity evaluation toward aquatic organism of ILs.

Assessing the ecotoxicity of ionic liquids on Vibrio fischeri using electrostatic potential descriptors

Ionic liquids (ILs) have attracted increasing attention both in the scientific community and the industry in the past two decades. Their risk of being inevitable released to ecosystem lights up the urgent research on their toxicity to the environment. To reduce the time and capital consumption on testing tremendous ILs ecotoxicity experimentally, it is essential to construct predictive models for estimating their toxicity. The objective of this study is to provide a new approach for evaluating the ecotoxicity of ILs. A comprehensive ecotoxicity dataset for Vibrio fischeri involving 142 ILs, was collected and investigated. The electrostatic potential surface areas (S_EP) of separate cations and anions of ILs were firstly applied to develop predictive models for ecotoxicity on Vibrio fischeri. In addition, an intelligent algorithm named extreme learning machine (ELM) was employed to establish the predictive model. The squared correlation coefficients (R²), the average absolute error (AAE%) and the root-mean-square error (RMSE) of the developed model are 0.9272, 0.2101 and 0.3262 for the entire set, respectively. The proposed approach based on the high R² and low deviation has remarkable potential for predicting ILs ecotoxicity on Vibrio fischeri.

Discovering Low Toxicity Ionic Liquids for Saccharomyces cerevisiae by Using the Agar Well Diffusion Test

Ionic liquids (ILs) are new solvents widely used in many technologies due to their unique and advantageous physicochemical properties. In biotechnological applications, ILs can be used along with microorganisms such as Saccharomyces cerevisiae. Due to the enormous number of ILs that can be synthesized through the combination of different anions and cations, it is necessary to have an easy and quick tool for the preliminary screening of their biocompatibility for being used in biotechnological applications. In this work, the agar well diffusion test was successfully applied as a rapid method to identify toxic/nontoxic ILs toward S. cerevisiae. Sixty-three ILs containing a diverse set of cations and anions were used. Through this methodology, nine fully biocompatible ILs toward S. cerevisiae were identified, including: [Bmim+] [NO3−], [HOPmim+] [NO3−], [Bmim+] [NTf2−], [N8,8,8,1+] [NTf2−], [S2,2,2+] [NTf2−], [EMPyr+] [NTf2−], [BMPi+] [NTf2−], [Moxa+] [MeSO4−] and [Chol+] [H2PO4−]. The analysis of the results also provides preliminary rules to enable the design of biocompatible ILs with S. cerevisiae. In this context, the toxicity was mainly determined by the cation nature although some anions can also display a strong influence on the IL biocompatibility as the bistriflimide anion. Besides, it was observed that an increase in the alkyl chain length of cations, such as imidazolium or pyridinium, involves an increase in the IL toxicity.