Biosorption of heavy metal arsenic from Industrial Sewage of Davangere District, Karnataka, India, using indigenous fungal isolates

Biosorption of arsenic (III) from aqueous solution using calcium alginate immobilized dead biomass of Acinetobacter sp. strain Sp2b

This study presents a novel biosorbent developed by immobilizing dead Sp2b bacterial biomass into calcium alginate (CASp2b) to efficiently remove arsenic (AsIII) from contaminated water. The bacterium Sp2b was isolated from arsenic-contaminated industrial soil of Punjab, a state in India. The strain was designated Acinetobacter sp. strain Sp2b as per the 16S rDNA sequencing, GenBank accession number -OP010048.The CASp2b was used for the biosorption studies after an initial screening for the biosorption capacity of Sp2b biomass with immobilized biomass in both live and dead states. The optimum biosorption conditions were examined in batch experimentations with contact time, pH, biomass, temperature, and AsIII concentration variables. The maximum biosorption capacity (qmax = 20.1 ± 0.76 mg/g of CA Sp2b) was obtained at pH9, 35 ̊ C, 20 min contact time, and 120 rpm agitation speed. The isotherm, kinetic and thermodynamic modeling of the experimental data favored Freundlich isotherm (R2 = 0.941) and pseudo-2nd-order kinetics (R2 = 0.968) with endothermic nature (ΔH° = 27.42) and high randomness (ΔS° = 58.1).The scanning electron microscopy with energy dispersive X-ray (SEM-EDX) analysis indicated the As surface binding. The reusability study revealed the reasonable usage of beads up to 5 cycles. In conclusion, CASp2b is a promising, efficient, eco-friendly biosorbent for AsIII removal from contaminated water.

Removing Heavy Metals: Cutting-Edge Strategies and Advancements in Biosorption Technology

This article explores recent advancements and innovative strategies in biosorption technology, with a particular focus on the removal of heavy metals, such as Cu(II), Pb(II), Cr(III), Cr(VI), Zn(II), and Ni(II), and a metalloid, As(V), from various sources. Detailed information on biosorbents, including their composition, structure, and performance metrics in heavy metal sorption, is presented. Specific attention is given to the numerical values of the adsorption capacities for each metal, showcasing the efficacy of biosorbents in removing Cu (up to 96.4%), Pb (up to 95%), Cr (up to 99.9%), Zn (up to 99%), Ni (up to 93.8%), and As (up to 92.9%) from wastewater and industrial effluents. In addition, the issue of biosorbent deactivation and failure over time is highlighted as it is crucial for the successful implementation of adsorption in practical applications. Such phenomena as blockage by other cations or chemical decomposition are reported, and chemical, thermal, and microwave treatments are indicated as effective regeneration techniques. Ongoing research should focus on the development of more resilient biosorbent materials, optimizing regeneration techniques, and exploring innovative approaches to improve the long-term performance and sustainability of biosorption technologies. The analysis showed that biosorption emerges as a promising strategy for alleviating pollutants in wastewater and industrial effluents, offering a sustainable and environmentally friendly approach to addressing water pollution challenges.

A Review about the Mycoremediation of Soil Impacted by War-like Activities: Challenges and Gaps

(1) Background: The frequency and intensity of war-like activities (war, military training, and shooting ranges) worldwide cause soil pollution by metals, metalloids, explosives, radionuclides, and herbicides. Despite this environmentally worrying scenario, soil decontamination in former war zones almost always involves incineration. Nevertheless, this practice is expensive, and its efficiency is suitable only for organic pollutants. Therefore, treating soils polluted by wars requires efficient and economically viable alternatives. In this sense, this manuscript reviews the status and knowledge gaps of mycoremediation. (2) Methods: The literature review consisted of searches on ScienceDirect and Web of Science for articles (1980 to 2023) on the mycoremediation of soils containing pollutants derived from war-like activities. (3) Results: This review highlighted that mycoremediation has many successful applications for removing all pollutants of war-like activities. However, the mycoremediation of soils in former war zones and those impacted by military training and shooting ranges is still very incipient, with most applications emphasizing explosives. (4) Conclusion: The mycoremediation of soils from conflict zones is an entirely open field of research, and the main challenge is to optimize experimental conditions on a field scale.

Ecosystem Protection through Myco-Remediation of Chromium and Arsenic

The current study emphasizes fungi as an important tool against heavy metals and how isolated fungal species can be used to create a successful strategy for the bioremediation of chromium and arsenic-contaminated sites/soils. Globally, heavy metal pollution is a serious issue. In the current investigation, contaminated sites were chosen, and samples could be taken from various localities of Hisar (29.1492° N, 75.7217° E) and Panipat (29.3909° N, 76.9635° E), India. A total of 19 fungal isolates were obtained from the collected samples through the enrichment culture technique using PDA media supplemented with Cr as chromic chloride hexahydrate (50 mg/L) and As as sodium arsenate (10 mg/L) and the potential of fungal isolates to be used for the removal of heavy metals was examined. The isolates were screened for minimum inhibitory concentrations (MIC) exhibiting tolerance capabilities, and the four best isolates C1, C3, A2, and A6 with the highest MICs (>5000 mg/L), were chosen for further investigations. To use the chosen isolates in the remediation of heavy metals (Cr and As), the culture conditions were optimized. The fungal isolates C1 and C3 estimated the highest removal of 58.60% and 57.00% at 50 ppm chromium concentration, while the isolates A6 and A2 recorded the highest removal efficiency of 80% and 56% at 10 ppm arsenic concentration under optimal conditions. Finally, the chosen fungal isolates C1 and A6 were molecularly identified as Aspergillus tamarii and Aspergillus ustus, respectively.

Fungal assisted bio-treatment of environmental pollutants with comprehensive emphasis on noxious heavy metals: Recent updates

In the present time of speedy developments and industrialization, heavy metals are being uncovered in aquatic environment and soil via refining, electroplating, processing, mining, metallurgical activities, dyeing and other several metallic and metal based industrial and synthetic activities. Heavy metals like lead (Pb), mercury (Hg), cadmium (Cd), arsenic (As), Zinc (Zn), Cobalt (Co), Iron (Fe), and many other are considered as seriously noxious and toxic for the aquatic environment, human, and other aquatic lives and have damaging influences. Such heavy metals, which are very tough to be degraded, can be managed by reducing their potential through various processes like removal, precipitation, oxidation-reduction, bio-sorption, recovery, bioaccumulation, bio-mineralization etc. Microbes are known as talented bio-agents for the heavy metals detoxification process and fungi are one of the cherished bio-sources that show noteworthy aptitude of heavy metal sorption and metal tolerance. Thus, the main objective of the authors was to come with a comprehensive review having methodological insights on the novel and recent results in the field of mycoremediation of heavy metals. This review significantly assesses the potential talent of fungi in heavy metal detoxification and thus, in environmental restoration. Many reported works, methodologies and mechanistic sights have been evaluated to explore the fungal-assisted heavy metal remediation. Herein, a compact and effectual discussion on the recent mycoremediation studies of organic pollutants like dyes, petroleum, pesticides, insecticides, herbicides, and pharmaceutical wastes have also been presented.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pHPZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.

ANN-GA based biosorption of As(III) from water through chemo-tailored and iron impregnated fungal biofilter system

The iron impregnated fungal bio-filter (IIFB) discs of luffa sponge containing Phanerochaete chrysosporium mycelia have been used for the removal of As(III) from water. Two different forms of same biomass viz. free fungal biomass (FFB) and modified free fungal biomass (chemically modified and iron impregnated; CFB and IIFB) have been simultaneously investigated to compare the performance of immobilization, chemo-tailoring and iron impregnation for remediation of As(III). IIFB showed highest uptake capacity and percentage removal of As(III), 1.32 mg/g and 92.4% respectively among FFB, CFB and IIFB. Further, the application of RSM and ANN-GA based mathematical model showed a substantial increase in removal i.e. 99.2% of As(III) was filtered out from water at optimised conditions i.e. biomass dose 0.72 g/L, pH 7.31, temperature 42 °C, and initial As(III) concentration 1.1 mg/L. Isotherm, kinetic and thermodynamic studies proved that the process followed monolayer sorption pattern in spontaneous and endothermic way through pseudo-second order kinetic pathway. Continuous mode of As(III) removal in IIFB packed bed bioreactor, revealed increased removal of As(III) from 76.40 to 88.23% with increased column height from 5 to 25 cm whereas the removal decreased from 88.23 to 69.45% while increasing flow rate from 1.66 to 8.30 mL/min. Moreover, the IIFB discs was regenerated by using 10% NaOH as eluting agent and evaluated for As(III) removal for four sorption–desorption cycles, showing slight decrease of their efficiency by 1–2%. SEM–EDX, pHzpc, and FTIR analysis, revealed the involvement of hydroxyl and amino surface groups following a non-electrostatic legend exchange sorption mechanism during removal of As(III).