A study of the periodontium during orthodontic rotation of teeth

Treatment of patients with crowding of the anterior group of teeth by circumferential supracrestal fiberotomy

OBJECTIVE

Aim: To evaluate the effectiveness of the use of circumferential supracrestal fiberotomy in the treatment of tortoanomalies to improve the effectiveness of treatment, prevent recurrence and increase the stability of the achieved result.

PATIENTS AND METHODS

Materials and Methods: Our study consists in determining the effectiveness of the use of methods that prevent the recurrence of tortoanomalies - circumferential supracrestal fiberotomy (CSF) in patients over the age of 16 years and the effect of CSF on the gingival junction in the treatment of tortoanomalіes with fixed orthodontic multibonding equipment.

RESULTS

Results: The high level of stability of results proves expediency operations circumferential supracrestal fiberotomy and papilla splitting at orthodontic treatment of frontal teeth density at patients older 16 years and for increasing stability of results of treatment by prevention of relapse tortoanomalies. Efficiency of the offered ways of treatment is proved clinically and anthropometrically on the early and remote terms of supervision (1, 6, 12 months).

CONCLUSION

Conclusions: The high level of stability of results proves expediency operations circumferential supracrestal fiberotomy and papilla splitting at orthodontic treatment of frontal teeth density at patients older 16 years and for increasing stability of results of treatment by prevention of relapse tortoanomalies. Efficiency of the offered ways of treatment is proved clinically and anthropometrically on the early and remote terms of supervision (1, 6, 12 months).

Clinical parameters in soft tissue adjunctive periodontal procedures for orthodontic patients: surgical laser vs scalpel

OBJECTIVES

To systematically review existing literature regarding clinical parameters comparing surgical laser and conventional surgery with scalpel for soft tissue adjunctive periodontal procedures in orthodontic patients.

METHODS AND MATERIALS

MEDLINE, Scopus, Web of Science, The Cochrane Library, LILACS, Bibliografia Brasileira de Odontologia (Brazilian Dental Literature - BBO), Embase, Open Grey, Portal de Periódicos da Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (Coordination for the Improvement of Higher Education Personnel - CAPES), and Google Scholar were searched up to December 2020 without language restriction. Clinical trials comparing clinical parameters from surgical laser and conventional surgery with scalpel for soft tissue adjunctive periodontal procedures in orthodontic patients were selected. Risk of bias (RoB) assessments were performed using the Cochrane RoB2 tool. Narrative syntheses were performed, and the certainty of evidence was determined using the GRADE tool.

RESULTS

Five randomized clinical trials were included. One study was rated as low RoB, whereas others presented some concerns or high RoB. The studies were highly heterogeneous in relation to the procedure performed, laser protocol, outcomes evaluated, and follow-up periods. In general, regardless of the procedure and laser protocol used, the studies did not show significant differences between laser and scalpel for the outcomes of probing pocket depth, clinical crown length, gingival index, and relapse rate. Pain and bleeding were significantly lower with the use of laser compared with the scalpel. The certainty of evidence ranged from moderate to very low.

CONCLUSIONS

The existing literature on the subject is scarce and very heterogeneous and has methodological limitations. Based on the available evidence, it is not possible to draw definitive conclusions about the beneficial effect of laser use in orthodontic patients.

Effect of micro-osteoperforations on the gene expression profile of the periodontal ligament of orthodontically moved human teeth

OBJECTIVES

This study aimed to evaluate the effect of micro-osteoperforations (MOPs) on the gene expression profile of the periodontal ligament (PDL) of orthodontically moved teeth.

MATERIALS AND METHODS

Fifteen participants were randomly assigned into two groups: tooth movement only (Tr1, n = 7) and tooth movement supplemented with MOPs (Tr2, n = 8). In each subject, orthodontic tooth movement (OTM) was performed on premolar in one side, while no force was applied on contralateral premolar (Unt, n = 15). Seven days after loading, premolars were extracted for orthodontic reasons. RNA extraction from PDL and subsequent RNA-sequencing were performed. False discovery rates (Padj < 0.05) and log2 fold change (+ / - 1.5) thresholds were used to identify sets of differentially expressed genes (DEGs) among the groups. DEGs were analyzed with gene ontology enrichment, KEGG, and network analysis.

RESULTS

Three hundred thirty-one DEGs were found between Tr1 and Unt, and 356 between Tr2 and Unt. Although, there were no significantly DEGs between Tr2 and Tr1, DEGs identified exclusively in Tr1 vs. Unt were different from those identified exclusively in Tr2 vs. Unt. In Tr1, genes were related to bone metabolism processes, such as osteoclast and osteoblast differentiation. In Tr2, genes were associated to inflammation processes, like inflammatory and immune responses, and cellular response to tumor necrosis factor.

CONCLUSIONS

MOPs do not significantly alter the PDL gene expression profile of orthodontically moved human teeth. This study provides for the first time evidence on the whole PDL gene expression profiles associated to OTM in humans. Novel biomarkers for OTM are suggested for additional research. Clinical relevance The identified biomarkers provide new insights into the molecular mechanisms that would occur when OTM is supplemented with MOPs. These markers are expected to be useful in the near future for the application of personalized strategies related to the OTM.

TAD's for the Derotation of 90° Rotated Maxillary Bicuspids

It is undeniable that the advent of extra-alveolar mini-implants for anchorage purposes has revolutionized the field of Orthodontics. This case report sheds light on an innovative anchorage plan using TADs, to carry out treatment for a 15-year-old female patient. The patient reported to the clinic with a chief complaint of rotated second premolars, crowding, and a deep bite. On examination, it was seen that the patient had a Class I skeletal pattern, Class II subdivision molar relationship, 90-degree maxillary second premolar rotations, crowding in both the arches, and a deep bite. In this case, the clinicians decided to use TADs for premolar derotation as it not only provides a pure rotational couple without any deleterious effects on the adjacent teeth but also helps shorten the overall treatment time. The total treatment time for this case was 10 months.

Antifibrotic effects of sulforaphane treatment on gingival elasticity reduces orthodontic relapse after rotational tooth movement in beagle dogs

Objective

Increased gingival elasticity has been implicated as the cause of relapse following orthodontic rotational tooth movement and approaches to reduce relapse are limited. This study aimed to investigate the effects of sulforaphane (SFN), an inhibitor of osteoclastogenesis, on gene expression in gingival fibroblasts and relapse after rotational tooth movement in beagle dogs.

Methods

The lower lateral incisors of five beagle dogs were rotated. SFN or dimethylsulfoxide (DMSO) were injected into the supra-alveolar gingiva of the experimental and control group, respectively, and the effect of SFN on relapse tendency was evaluated. Changes in mRNA expression of extracellular matrix components associated with gingival elasticity in beagles were investigated by real-time polymerase chain reaction. Morphology and arrangement of collagen fibers were observed on Masson's trichrome staining of buccal gingival tissues of experimental and control teeth.

Results

SFN reduced the amount and percentage of relapse of orthodontic rotation. It also decreased the gene expression of lysyl oxidase and increased the gene expression of matrix metalloproteinase (MMP) 1 and MMP 12, compared with DMSO control subjects. Histologically, collagen fiber bundles were arranged irregularly and were not well connected in the SFN-treated group, whereas the fibers extended in parallel and perpendicular directions toward the gingiva and alveolar bone in a more regular and well-ordered arrangement in the DMSO-treated group.

Conclusions

Our findings demonstrated that SFN treatment may be a promising pharmacologic approach to prevent orthodontic rotational relapse caused by increased gingival elasticity of rotated teeth in beagle dogs.

Alternative treatment approach for anterior subgingival dental lesions: Forced eruption using attractive magnets

This article reports the use of a minimally invasive technique to address a challenging clinical problem in the esthetic zone. The clinical steps taken to achieve forced eruption by 1.5-2.0 mm of a maxillary central incisor that presented minimal clinical crown because of caries are described in detail. This subsequently allowed the successful placement of a crown. The tooth was extruded by forces generated between 2 neodymium-iron-boron magnets. One was affixed to the palatal surface of the tooth, and the other was embedded in a thermoformed splint. Weekly circumferential supracrestal fiberotomies were performed to enable extrusion without osseous migration. The extrusion was clinically and radiographically detectable after 6 weeks of magnetic force application. After an initial retention period of 8 weeks, the maxillary incisors were restored with lithium-disilicate ceramic veneers and crowns.

Use of Laser Systems in Orthodontics

Laser systems have been used in the practice of dentistry for >35 years. Laser systems have so many advantages, such as increase patient cooperation, reduce the duration of treatment time, and help the orthodontists to enhance the design of a patient's smile to improve treatment efficacy, and the success of orthodontic treatments can also be improved by diminishing the orthodontic pain and the discomfort of the patients. Laser systems also have some disadvantages, such as cost, large space requirements for some types, and high-risk potential for physician and patient if not used at the appropriate wavelength and power density, that is why before incorporating lasers into clinical practice, the physician must fully understand the basic science, safety protocol, and risks associated with them. Lasers have many applications in orthodontics, including accelerating tooth movement, bonding and debonding processes, pain reduction, bone regeneration, etching procedures, increase mini-implant stability, soft tissue procedures (gingivectomy, frenectomy, operculectomy, papilla flattening, uncovering temporary anchorage devices, ablation of aphthous ulcerations, and exposure of impacted teeth), fiberotomy, scanning systems, and welding procedures. In reviewing the literature on the use of laser in orthodontics, many studies have been conducted. The purpose of the present study was to give information about the use of laser in the field of orthodontics, the effects of laser during the postoperative period, and its advantages and disadvantages and to provide general information about the requirements to be considered during the use of laser.

ORTHODONTIST CLINICAL EXPERIENCE AND CLINICAL SITUATION SIGNIFICANTLY INFLUENCE THE RETENTION PROTOCOL - A SURVEY FROM CROATIA

The aim was to assess the views and practice of Croatian orthodontists concerning retention protocols. A total of 150 questionnaire copies were distributed, of which 92 were validly completed. The survey included sociodemographic characteristics, practices of informing patients about retention options, commonly used appliances, and reasons for choosing a particular type of retention and treatment duration. Orthodontists informed patients about retention mostly verbally, the retention period was 3-5 years, the choice of method depended on the malocclusion (76%), and the protocol was influenced by clinical experience of the orthodontist (39%). The most commonly used appliance in the maxilla was the vacuum-formed retainer (52%), whereas a combination of fixed and removable retainers was most common in the mandible (34%). Modus of acquiring knowledge, biological reasons (malocclusion type, oral health, treatment outcome, and growth) and the patient’s wishes were not a predictor of retention duration or recall frequency. With an increase in orthodontic experience, the duration of retention decreased and orthodontists were more likely to change the duration of retention (p=0.001), as well as the type of retention appliance (p<0.001). In conclusion, retention protocols among Croatian orthodontists were influenced mostly by their clinical experience and clinical situation.

Elastic fiber system evaluated in the digestive organ of rats

According to our previous reports, the intraperiodontal elastic fiber system comprises oxytalan fibers, whereas all types of elastic system fibers are present in the gingiva. Much remains to be elucidated regarding the topographic development of the elastic fiber system that constitutes the walls of the digestive organs. This study aimed to examine the topographic development of the elastic fiber system in the periodontal tissue, oral cavity and digestive tract of rats at light- and electron microscopic levels. At embryonic day 20, in situ hybridization revealed the mRNA expression of tropoelastin in the putative gingival lamina propria but not in the dental follicle. At the postnatal stage, the masticatory mucous membrane of the gingiva and hard palate comprised three different types of elastic system fibers (oxytalan, elaunin and elastic fibers). Conversely, the elastic fiber system comprised elaunin and elastic fibers in other oral mucosae and the lining mucosae of digestive tract organs (the esophagus, stomach and small intestine). The findings of our study suggest that the elastic fiber system is mainly related to tissue resistance in the periodontal ligament and tissue elasticity in the oral mucosae without masticatory mucosae and the overlying mucosa of digestive tracts and both functions in the gingiva and hard palate, respectively. The appearance of elaunin fibers in the periodontium of rats aged 14 weeks suggests the expression of tropoelastin induced by mechanical stressors such as mastication. The intraperiodontal difference in the distribution of elaunin fibers suggests heterogeneity among fibroblasts constituting the periodontium.

Rotational relapse of anterior teeth following orthodontic treatment and circumferential supracrestal fiberotomy

Background/purpose

Several factors cause relapse of orthodontically de-rotated teeth after appliance removal. Circumferential supracrestal fiberotomy (CSF) may release the tension on the supra-alveolar fibers following tooth de-rotation, thereby reducing the relapse risk. However, careful identification of the amount and location of relapse enables proper clinical evaluation. We aimed to determine the amount of orthodontic relapse following CSF for de-rotated anterior teeth.

Materials and methods

Eleven patients with 90 orthodontically de-rotated anterior teeth were enrolled. CSF was performed after orthodontic treatment, during fixed retainer placement. Rotational correction and relapse were measured on three casts (preorthodontic treatment, cast 1; postorthodontic treatment + CSF, cast 2; and 12-month follow-up, cast 3). The Wilcoxon test was used to assess significant differences in the tooth rotation angles between casts 1 and 2 and casts 2 and 3. The relationship between the magnitude of relapse and pretreatment severity of rotation was assessed by the point biserial correlation test. The Mann-Whitney U test helped in identifying significant differences in the amount of relapse between maxillary and mandibular teeth.

Results

The mean amount of rotational correction was 14.05°, while the mean amount and percentage of relapse were 1.1° and 10.8%, respectively [0.81° (8%) and 1.44° (14%) for maxillary and mandibular teeth, respectively]. The relapse amount was proportional to the pretreatment rotation severity, and it was larger for the mandibular canines. There was no significant difference in the amount of relapse between the maxillary and mandibular teeth (P = 0.07).

Conclusion

Post-treatment rotational relapse of anterior teeth subjected to CSF was minimal and statistically insignificant after 1 year of follow-up. This validates the promising results of CSF when combined with appropriate mechanical retention for an adequate period.

Comparison of conventional and laser-aided fiberotomy in relapse tendency of rotated tooth: A randomized controlled clinical trial

INTRODUCTION

The aim of the present study was to compare the tendency of mandibular incisor rotation relapse after conventional circumferential supracrestal fiberotomy (CSF) with Er,Cr:YSGG laser-aided CSF.

METHODS

In this three-arm parallel study, the patients with one lower incisor rotation greater than 30 degrees before treatment were selected. The patients were randomly assigned to three groups in a 1:1:1 ratio. Rotational relapse tendency was measured on a digitized model one month after arch wire removal. Probing depth, clinical crown height and pain levels were also measured.

RESULTS

A total of 46 patients were recruited. Relapse tendency in conventional CSF and laser-aided CSF groups were 5.09±1.59° and 4.87±2.08°, respectively, and significantly lower than 11.28±2.93° in the control group (P<0.001). Relapse tendency was not different between the conventional CSF and laser CSF groups. Probing depth, clinical crown height, and experienced pain levels exhibited negligible differences.

CONCLUSIONS

Er,Cr:YSGG laser-aided CSF in one month was as effective in reducing rotational relapse tendency of mandibular incisor teeth as conventional CSF.

Retention in orthodontics

Retention is necessary following orthodontic treatment to prevent relapse of the final occlusal outcome. Relapse can occur as a result of forces from the periodontal fibres around the teeth which tend to pull the teeth back towards their pre-treatment positions, and also from deflecting occlusal contacts if the final occlusion is less than ideal. Age changes, in the form of ongoing dentofacial growth, as well as changes in the surrounding soft tissues, can also affect the stability of the orthodontic outcome. It is therefore essential that orthodontists, patients and their general dental practitioners understand the importance of wearing retainers after orthodontic treatment. This article will update the reader on the different types of removable and fixed retainers, including their indications, duration of wear, and how they should be managed in order to minimise any unwanted effects on oral health and orthodontic outcomes. The key roles that the general dental practitioner can play in supporting their patients wearing orthodontic retainers are also emphasised.

A survey on retention practice among orthodontists in Malaysia

Objective

The aim of this study was to evaluate retention practices commonly employed by orthodontists. The objectives were to identify the types of retainer frequently used and to investigate the variations in retention practice.

Methods

A total of 97 orthodontists were randomly selected, and a questionnaire consisting of 25 multiple-choice questions sent to them by mail. Upon receiving of the completed questionnaires, the data were statistically analyzed.

Results

A total of 32 responses were received; among these, 59.4% of orthodontists' practiced is in a government setting and 40.6% were in private practice. A vacuum-formed retainer was the most commonly used removable retainer for both maxillary (46.9%) and mandibular (46.9%) arches, followed by a Hawley retainer (maxilla, 43.8%; mandible, 37.5%), and a fixed retainer (maxilla, 3.1%; mandible, 9.4%). Of the responding orthodontists, 78.1% prescribed full-time wear (more than 20 h per day) for a duration of 3–9 months for a maxillary arch, compared to 71.9% for the mandibular arch. Only 18.8% of the orthodontists prescribed part-time wear of the retainer for the maxillary arch, compared to 21.9% for the mandibular arch. The majority of orthodontists did not instruct their patients to stop wearing removable retainers (71.9%) or fixed retainers (66.8%) at any specific time and they preferred their patients to continue wearing retainers.

Conclusions

Vacuum-formed retainers are the most commonly used retainers among orthodontists. The majority of orthodontists prescribed full-time wear for more than 20 h per day with a duration of 3–9 months and preferred indefinite use of the retainer.

Comparison of maxillary molar distalization with an implant-supported distal jet and a traditional tooth-supported distal jet appliance

Aim. To investigate and compare the efficiency of two appliances for molar distalization: the bone-anchored distal screw (DS) and the traditional tooth-supported distal jet (DJ) for molar distalization and anchorage loss. Methods. Tests (18 subjects) were treated with a DS and controls (18 subjects) were treated with a DJ. Lateral cephalograms were obtained before and at the end of molar distalization and were analysed. Shapiro Wilk test, unpaired t-test, and Wilcoxon rank-sum test were applied according to values distribution. The α level was fixed at 0.05. Results. Maxillary first molars were successfully distalized into a Class I relationship in all patients. The mean molar distalization and treatment time were similar in both groups. The DS group exhibited a spontaneous distalization (2.1 ± 0.9 mm) of the first premolar with control of anchorage loss, distal tipping, extrusion, and skeletal changes. Conclusions. The DS is an adequate compliance-free distalizing appliance that can be used safely for the correction of Class II malocclusions. In comparison to the traditional DJ, the DS enables not only a good rate of molar distalization, but also a spontaneous distalization of the first premolars.

Long-term stability of maxillary anterior alignment in non-extraction cases

OBJECTIVE: The purpose of this retrospective study was to evaluate long-term stability of maxillary incisors alignment in cases submitted to non-extraction orthodontic treatment. METHODS: The sample comprised 23 patients (13 female; 10 male) at a mean initial age of 13.36 years (SD = 1.81 years), treated with fixed appliances. Dental cast measurements were obtained at three different time points (T1 - pretreatment, T2 - posttreatment and T3 - long-term posttreatment). Variables assessed in maxillary arch were Little Irregularity Index, intercanine, interpremolar and intermolar widths, arch length and perimeter. The statistical analysis was performed by one-way ANOVA and Tukey tests when necessary. Pearson' correlation coefficients were used to investigate possible associations between the evaluated variables. RESULTS: There was no significant change in most arch dimension measurements during and after treatment, however, during the long-term posttreatment period, it was observed a significant maxillary incisors crowding relapse. CONCLUSION: The maxillary incisors irregularity increased significantly (1.52 mm) during long-term posttreatment. None of the studied clinical factors demonstrated to be predictive of the maxillary crowding relapse.

Biomechanical considerations on tooth-implant supported fixed partial dentures

This article discusses the connection of teeth to implants, in order to restore partial edentulism. The main problem arising from this connection is tooth intrusion, which can occur in up to 7.3% of the cases. The justification of this complication is being attempted through the perspective of biomechanics of the involved anatomical structures, that is, the periodontal ligament and the bone, as well as that of the teeth- and implant-supported fixed partial dentures.

The oxytalan fibre network in the periodontium and its possible mechanical function

The biomechanical character of the periodontal ligament (PDL) is crucial in its response to functional and orthodontic forces. Collagen has been the primary subject of investigations in this field. Several studies, however, indicate that oxytalan fibres, which belong to the elastic fibre family, also contribute to the biomechanical character and behaviour of the PDL. In order to elucidate this, we have evaluated the available literature on the oxytalan fibre network within the PDL and supra-alveolar tissues with respect to development, morphology and distribution, and response to mechanical stimulation. To this end, we have combined the classical histological studies with more recent in vitro studies. Oxytalan fibres develop simultaneously with the root and the vascular system within the PDL. A close association between oxytalan fibres and the vascular system also remains later in life, suggesting a role in vascular support. Mechanical loading of the PDL, through orthodontic force application, appears to induce an increase in the number, size, and length of oxytalan fibres. In line with this, in vitro stretching of PDL fibroblasts (PDLFs) results in an increased production of fibrillin, a major structural component of the microfibrils that make up oxytalan fibres. The available data suggest a mechanical function for oxytalan, but to date experimental data are limited. Further research is required to clarify their exact mechanical function and possible role in orthodontic tooth movement.

Effects of laser-aided circumferential supracrestal fiberotomy on root surfaces

OBJECTIVE

To evaluate and compare the effects of circumferential supracrestal fiberotomy in vivo (using diode, CO(2), and Er∶YAG lasers) on the morphology and chemical composition of the root surface.

MATERIALS AND METHODS

Forty healthy premolar teeth, intended for extraction for orthodontic reasons, were used in this study. Root surfaces were treated using different laser methods, as follows: (1) control; (2) Er∶YAG laser (2.94 µm, 100 mJ, 10 Hz); (3) diode laser (808 nm, 1.2 W, continuous wave); and (4) CO(2) laser (10.6 µm, 3 W, continuous wave). Subsequently, the teeth were removed and subjected to scanning electron microscopic (SEM) examination and energy dispersive x-ray (EDX) spectrometric analysis.

RESULTS

SEM analysis indicated that no thermal changes, including melting or carbonization, were observed following the lasing procedures. EDX analysis showed that the laser procedures resulted in similar mineral contents (weight % of calcium and phosphate) as compared to those in the control group.

CONCLUSION

Based on these findings, we concluded that laser-aided procedures, when used at appropriate laser settings, preserve the original morphology and chemical composition of cementum.

Laser-aided circumferential supracrestal fiberotomy and low-level laser therapy effects on relapse of rotated teeth in beagles

OBJECTIVE

To investigate the effectiveness and periodontal side effects of laser circumferential supracrestal fiberotomy (CSF) and low-level laser therapy (LLLT) on orthodontically rotated teeth in beagles.

MATERIALS AND METHODS

Eighteen mandibular incisors from nine dogs were divided into three groups by treatment (n = 6/group): A, orthodontic couple force application only (control); B, laser CSF following orthodontic couple force application; and C, LLLT following orthodontic couple force application. Both mandibular lateral incisors were rotated for 4 weeks, and the relapse tendency was observed for 4 weeks more without any retainers. The amount of relapse, sulcus depth, and gingival recession were measured at weeks 4 and 8. One-way analysis of variance (ANOVA) and Scheffé's post hoc test were used for data analysis. Tissue specimens were examined at week 8 under light microscopy after hematoxylin-eosin (H&E) and Masson's trichrome staining.

RESULTS

The mean percentage of relapse was 41.29% in group A, 14.52% in group B, and 56.80% in group C (P < .001). Four weeks after laser CSF, the sulcus depth increased by 0.67 mm, but no gingival recession was observed. There was no significant difference between groups A and C in terms of sulcus depth and gingival recession.

CONCLUSIONS

Laser CSF is an effective procedure to decrease relapse after tooth rotation, causing no apparent damage to the supporting periodontal structures, whereas LLLT on orthodontically rotated teeth without retainers appears to increase the relapse tendency.

Gingival response to mandibular incisor intrusion

INTRODUCTION

The aims of the study were to evaluate the rate of accompanying gingival movement and the changes in attached and keratinized gingivae after orthodontic intrusion of mandibular incisors.

METHODS

The study was carried out with 16 subjects whose mandibular incisors were orthodontically intruded for the correction of overbite. The orthodontic intrusion was performed with the segmented utility arch technique. Periodontal indexes and the widths of attached and keratinized gingivae were recorded before and after treatment. The gingival movement in relation to orthodontic intrusion was determined by means of radioopacity with a specially designed metal device indicating the position of the gingival margin and the mucogingival junction on the cephalograms taken before treatment and after intrusion.

RESULTS

There were no statistically significant changes in the width of attached and keratinized gingivae after treatment (P >.05). The gingival margin and the mucogingival junction moved in the same direction as the teeth by 79% and 62%, respectively. A statistically significant decrease of the clinical crown length was also observed (P <.05).

CONCLUSIONS

These results suggest that orthodontic intrusion does not lead to significant changes in the width of attached and keratinized gingivae when adequate plaque control is maintained. The gingiva moves in the same direction with the tooth, yet considerably less. This might indicate the need for follow-up or gingival correction after intrusion therapy.

Root resorption repair in mandibular first premolars after rotation. A transmission electron microscopy analysis combined with immunolabeling of osteopontin

INTRODUCTION

A previous study with scanning electron microscopy showed that orthodontic root resorption occurs at the lateral surfaces of premolar roots for 2 to 6 weeks after orthodontic rotation. The purpose of this investigation was to observe how resorbed cementum repairs during rotation movement.

METHODS

Twenty-one mandibular first premolars from 12 patients, orthodontically indicated for extraction, were used. They were intra-individually divided into 2 groups: 8 teeth were not moved (control group), and 13 were rotated (experimental group). In the experimental group, a rotational force (25 g both buccally and lingually) with a precise biomechanical model, individually calibrated, was applied for 2, 3, 4, or 6 weeks. After extraction, the teeth were fixed and decalcified, and 8 were conventionally processed for transmission electron microscopy, and 13 teeth were processed for high-resolution immunocytochemistry by using an antibody against osteopontin. The samples were analyzed in a transmission electron microscope.

RESULTS

This examination showed areas of repair in previously resorbed lacunae in the experimental group. Both the clastic cells and the root surface showed immunolabeling for osteopontin. In addition to areas of cementum resorption and various degrees of cell and extracellular matrix degeneration, active cementoblasts and fibroblasts in several stages of differentiation and activity appeared adjacent to newly synthesized collagen fibers, thus reestablishing the function of the periodontal ligament.

CONCLUSIONS

We concluded that cementum repair occurs after resorption during rotation movement and that noncollagenous matrix protein osteopontin plays a role in both resorbing and repairing.

Fractal analysis of the PDL-bone interface and implications for orthodontic tooth movement

BACKGROUND

The periodontal ligament (PDL) is a soft tissue interposed between the tooth and the alveolar bone. It is responsible for transmission of forces in vivo; this promotes bone remodeling. The purpose our study was to use fractal analysis to quantify the complex morphology of the PDL-bone interface.

METHODS

We used Scion Image (Scion Corp, Frederick, Md) and Benoit fractal analysis (Tru Soft International, St. Petersburg, Fla) programs to calculate the fractal dimension of the PDL-bone interface in rats via the box-counting method. Rats in the experimental groups received an initial force of 0.1N or 0.5N with customized springs for 6 hours.

RESULTS

Our studies showed an increase in normal fractal dimension at the root apices of the rats' maxillary molars. We also found evidence that the fractal dimension varies along the entire root length from the apex to the cementoenamel junction.

CONCLUSIONS

Mechanical loading might lead to an increase in fractal dimension at the PDL-bone interface apart from mechanisms of bone cell directed remodeling. These changes in fractal dimension are proportional to loading and could provide a new parameter for force determination in orthodontic tooth movement.

Root resorption in human mandibular first premolars after rotation as detected by scanning electron microscopy

The aims of this study were to investigate the presence, location, and severity of root resorption after orthodontic rotation for different lengths of time. Eighteen mandibular first premolars due to be extracted from 9 patients were intraindividually divided into 2 groups. Eight teeth were not moved (control group), and 10 teeth were rotated (experimental group) with a force of 50 g delivered by elastomeric modules through symmetrical brackets bonded on the buccal and lingual surfaces (25 g buccally and 25 g lingually) for periods of 2, 3, 4, and 6 weeks. The teeth were extracted, fixed, and treated with 2% sodium hypochlorite to remove the organic tissue components and then dehydrated in ethanol, air-dried, coated with gold, and analyzed in a scanning electron microscope. Examination by scanning electron microscopy revealed many concavities (resorption lacunae) on the root surfaces of all rotated teeth. The resorption areas were located mainly at the medial root third, in regions that corresponded to the prominent zones of the roots. The resorption lacunae in the teeth moved for longer time periods were deeper, often affecting the underlying root dentin, and were mainly at the medial root third. Both the apical and cervical thirds were clearly less affected at all the studied intervals. The root surfaces at the nonprominent root zones did not show signs of resorption.

The effect of retention on orthodontic relapse after the use of small continuous or discontinuous forces. An experimental study in beagle dogs

Relapse is a major concern in orthodontics for which avoidance retention is the general procedure. However, the effect of retention on relapse after active tooth movement with different force regimes has never been studied in a standardized experimental setting. Mandibular third premolars were extracted in 19 young adult beagle dogs. Three months later, the second premolars were bodily moved distally with forces of 10 cN or 25 cN. The forces were applied for 24 h d-1 or for 16 h d-1. After 4 months, relapse was allowed in half of the animals, while in the others relapse was preceded by retention for 90 d. Statistical analyses were performed on the relation between force regime, active tooth movement, retention, and relapse. Force magnitude had no effect on relapse, while continuous forces resulted in a longer-lasting and more pronounced relapse than did discontinuous forces. A significant positive correlation was found between the amount of active tooth movement and both the rate and the total amount of relapse, but not between the amount of active tooth movement and the duration of the relapse. Retention had no effect on the duration of the relapse, but it strongly decreased its total amount. Finally, the effect of retention on the amount of relapse was strongly correlated with the amount of active tooth movement.

Is the postretention relapse of maxillary and mandibular incisor alignment related?

Previous studies suggest a poor association between initial and postretention pattern of incisor irregularity. One explanation may be that the incisor movements are limited by the boundaries provided by the incisors in the opposite arch. If so, postretention malalignment of the maxillary and mandibular incisors may be related. To test this hypothesis, long-term postretention study models of 96 patients with acceptable occlusion at the time of appliance removal were examined. The occlusal surfaces of the postretention study models were photocopied, and tooth anatomical contact points were digitized. An algorithm was used to fit the dental arch to the digitized points. The amount of incisor rotation and anatomical contact point displacement of maxillary and mandibular anterior teeth, relative to their respective dental arches, were computer generated. Overbite, the number of occlusal contact points in the anterior segment, and concavity of the lingual surfaces of the maxillary incisors were recorded manually. Statistical analyses demonstrated a significant association (P <.05) between the overall irregularity of the maxillary and mandibular incisors. The association did not differ among subgroups that were stratified according to overbite or number of occlusal contacts. No associations were found for the overall amount of incisor rotation in the 2 arches (P >.05). The amount and direction of displacement of antagonistic pairs of maxillary and mandibular central incisors were also associated (P <.05), but not the amount and direction of rotation (P >.05). The lingual configuration of the maxillary incisors did not affect the pattern of mandibular incisor malalignment.

Short-term effects of fiberotomy on relapse of anterior crowding

The effects of fiberotomy were evaluated in alleviating dental relapse of incisors after orthodontic treatment. The study sample consisted of 23 patients with crowded maxillary and mandibular incisors before orthodontic treatment. The amount of initial crowding was determined according to Little's irregularity index. Fiberotomy procedures were performed on 11 of the patients 1 week before debonding. The other 12 subjects served as the control group. All patients wore Hawley retainers. Lateral cephalometric headfilms and dental casts of the patients were taken at the beginning (T1) and at the end (T2) of treatment, 6 months into the retention phase (T3), and 1 year after orthodontic treatment (T4). Significant increase of irregularity index was noted in the control group at T3 and T4 for both maxillary and mandibular anterior segments (P <.05, P <.01). Meanwhile, in the group where circumferential supracrestal fiberotomy was performed, no significant increase of the irregularity index was noted.

Gingival response to orthodontic force

Orthodontic tooth movement is brought about by prolonged application of force on the attachment apparatus. This results in cellular and extracellular changes within the periodontium. As shown in numerous studies, tooth movement is achieved after the remodeling of alveolar bone and the response of the periodontal ligament to the mechanical force. Although gingival changes have also been found to be an important factor in the overall response, the effect of orthodontic tooth movement on the gingiva has been investigated to a lesser extent. Unlike bone and periodontal ligament, which regain their original structure after removal of force, the gingival tissue does not regain its pretreatment structure, a fact on which a hypothesis has been made that tooth relapse after removal of retention may be associated with changes in the gingiva. The present review summarizes available data on the effect of orthodontic force on collagen, elastin, and collagenase in the gingiva and its relevance to understanding the mechanism of tooth relapse.

Retention and stability: a review of the literature

Long-term posttreatment stability is an issue of great concern to all orthodontists. This article highlights the factors reported to play a role in posttreatment crowding and reviews the long-term retention studies evaluating the stability of various treatment modalities. Recommendations, based on well-documented basic principles, are made to try to insure greater posttreatment stability of our orthodontically treated cases.

The effect of centrifugal force on the transcription levels of collagen type I and collagenase in cultured canine gingival fibroblasts

An orthodontically treated tooth is often destabilized in its newly corrected location and relapses towards its original position. Hitherto, the explanation for this phenomenon was that orthodontic force brings about "stretching" of gingival collagen fiber, which "pull back" the tooth towards its pretreatment position. A previous ultrastructural study showed that after force application the gingival collagen fibres were torn, laterally spaced and of increased diameter. Therefore, they could not "pull back" the tooth and be the cause of the relapse. In the present study, in order to find a more plausible explanation at the molecular level, the effect of pressure on the gene transcription of collagen type I and tissue collagenase was examined by semiquantitative, reverse transcriptase-polymerase chain reaction assay. Attached buccal gingiva was excised from anaesthetized dogs and gingival fibroblasts were grown in culture. Following application of pressure (0.167 kg/l g cell mass), the transcription of collagen type I was increased while that of tissue collagenase was decreased. These results corroborate the ultrastructural in vivo findings that orthodontic force is associated with larger amounts of collagen type I in the gingiva.

Associations between initial, posttreatment, and postretention alignment of maxillary anterior teeth

Contradictory findings from studies on pretreatment malalignment as a risk factor for relapse of maxillary incisor alignment may be due to inappropriate sample selection and measurement technique. In an attempt to clarify the issue, 745 sets of study models made before (T1) and after (T2) orthodontic treatment and at long-term out of retention (T3) were screened. On the basis of the configuration of the maxillary anterior teeth on the T3 study models, three groups were established: one with significant spacing (group 1, n = 30); one with significant irregularity (group 2, n = 49); and one with perfect alignment (group 3, n = 28). The occlusal surfaces of the 321 maxillary study models at T1, T2, and T3 were photocopied and the tooth anatomic contact points digitized. An algorithm was used to fit the dental arch to the digitized points. Amount of incisor rotation and anatomic contact point displacement of the maxillary anterior teeth relative to the dental arch were computer generated. Interdental spaces in the maxillary anterior segment, as well as overjet and overbite, were measured manually. Nonstructural data were collected from the charts. Logistic regression analyses revealed that irregularity was associated with greater anatomic contact displacement and with greater incisor rotation both at T1 and T2 (P < 0.01). Similar analyses also revealed that spacing was associated with greater interdental spaces at T1 and T2 (P < 0.01). Correlation analyses revealed that the pattern of pretreatment rotational displacement has a strong tendency to repeat itself after retention (P < 0.001), as opposed to the pattern of contact point displacement and interdental spacing.

Intrusion of teeth in the combination implant-to-natural-tooth fixed partial denture: a review of the theories

This article reviews the literature dealing with the combination implant-to-natural-tooth-supported fixed partial denture. The restoration of masticatory function with a combination implant-to-natural-tooth fixed partial denture is associated with a variety of undesirable clinical sequelae, including the breakage of implant components, damage to the abutment teeth, or intrusion of the abutment teeth. Theories regarding intrusion of abutment teeth combined with implants for fixed partial dentures are only speculative. Several theories are presented to explain the intrusion of natural teeth in association with implant-to-natural-tooth fixed partial dentures. One of the first theories was based on the idea that a lack of normal stimulation of the periodontal ligament produces atrophy of the periodontal ligament and intrusion of the tooth. The remaining theories relate to excessive forces being placed on the natural tooth, resulting in movement of the tooth to a less stressful position. These forces are placed on the tooth by differential energy dissipation, mandibular flexion and torsion, flexion of the fixed partial denture framework, impaired rebound memory, debris impaction or microjamming, or ratchet effect related to the use of precision attachments. Based a review of the literature, a philosophy for treating combination implant-to-natural-tooth restorations is presented.

The regenerative potential of oxytalan fibers. An experimental study in the monkey

Although a number of studies have described the oxytalan fibers as being a natural component of the periodontal ligament, little information exists about the regenerative potential of these connective tissue fibers. The aim of the present study was to examine whether oxytalan fibers have the capacity to reform after regenerative periodontal therapy. Intrabony defects were produced surgically at the mesial aspects of teeth 37, 35, 45, 47 and at the distal aspects of teeth 11, 21, 31, 41 in one monkey (Macaca fascicularis). After 3 months, the defects were exposed using a full-thickness flap procedure. The root surfaces were debrided and subsequently PDGF-growth factors were placed in the defects. 4 of the 8 sites were covered with a bioresorbable membrane before closure of the wound. Post-surgically, antibiotics were given systemically for 1 week, and tooth cleaning was carried out 1x a week during the entire experimental period. After 5 months, the animal was sacrificed and the oral tissues were fixed by perfusion with 10% buffered formalin. Specimens containing the defects and surrounding tissues were dissected free and histological sections were cut in the mesio-distal direction, parallel to the long axes of the teeth. The sections were stained with hematoxylin and eosin or with the oxone-aldehyde-fuchsin-Halmi staining method and subsequently examined in the light and in the electron microscope. The results revealed that new oxytalan fibers oriented mainly in an apico-occlusal direction had developed in the regenerated periodontal ligament. Many of the newly-formed fibers were inserted into the new cementum, thus suggesting a strong relationship between this tissue and the oxytalan fibers. It is concluded that the regenerated periodontal ligament connective tissue formed after surgery contains oxytalan fibers similar to those present in the original tissue. These results demonstrate that oxytalan fibers develop de novo in the newly-formed periodontal ligament.

The response of supraalveolar gingival collagen to orthodontic rotation movement in dogs

An orthodontically rotated tooth relapses toward its pretreatment position. Explanations for this phenomenon have been given after light microscopic studies, according to which it had been assumed that stretched supraalveolar gingival fibers pulled back the tooth and brought about relaxation of the stretched fibers. The rotational relapse, however, can be prevented by supraalveolar fiberotomy of the gingiva around the tooth. This investigation was initiated to reevaluate the validity of the hitherto assumed causes for the relapse, by obtaining ultrastructural data on the response of collagen fibers after orthodontic intervention. Lateral maxillary incisors in the dog were rotated with bonded fixed appliances. The teeth were divided into groups according to different orthodontic procedures. Scanning and transmission electron microscopic analyses were performed on gingival samples after proper processing. Analyses of the untreated control samples showed well-organized, parallel, and densely packed thick bundles of collagen fibers, interconnected with thin fibers. After rotation-followed-by-retention, the gingival fibers were torn, ripped, disorganized, and laterally spaced and of increased diameter. Thus it was concluded that all these patterns are incompatible with stretching. Also, an increased number of elastic fibers were seen in proximity to the torn collagen fibers. After gingival fiberotomy, most fibers resumed the appearance of the organized pattern of large fiber bundles similar to those seen in the controls.

Descemet's membrane in the iridocorneal-endothelial syndrome: morphology and composition

The iridocorneal-endothelial syndrome is a disease of the ocular anterior segment characterized by corneal failure, glaucoma and iris destruction. Specular photomicroscopical and histological studies suggest the disorder is caused by a population of abnormal corneal endothelial cells. In other corneal endotheliopathies Descemet's membrane, the basement membrane underlying the endothelial cells, is disfigured by the presence of an abnormal region of extracellular matrix termed a posterior collagenous layer, which is laid down by the diseased endothelial cells. In this study we sought to establish the typical morphology and composition of Descemet's membrane in the iridocorneal-endothelial syndrome. Ultrastructural examination of Descemet's membrane in 27 keratoplasty specimens identified three morphologic patterns. In the majority there was a posterior collagenous layer which in all cases consisted of an anterior layer of wide-spaced collagen and a posterior layer of microfibrils embedded in an amorphous matrix. In four specimens which did not possess a posterior collagenous layer the anterior banded zone of Descemet's membrane was absent. In five corneas Descemet's membrane was normal. The composition of the posterior collagenous layer was examined by immunoelectron microscopy (five corneas) and histochemistry (six corneas). Collagen Types I, III, V, VI and VIII, fibronectin, tenascin and oxytalan were microfibrillar components, collagen Type VIII formed wide-spaced collagen whilst laminin was present in the amorphous matrix. The stereotyped derangements of structure and composition identified in the endothelial basement membrane may significantly influence the pathobiology of this disorder.

Fuchs' endothelial dystrophy of the cornea

Fuchs' endothelial dystrophy of the cornea is a significant cause of corneal blindness in the United States. The disease is characterized by a slow, continuous loss of morphologically and physiologically altered endothelial cells, eventually leading to corneal edema. The endothelial cells synthesize a thickened Descemet's membrane with focal excrescences of altered basement membrane material (guttae). This review details the epidemiological, clinical, and laboratory data that have accumulated on Fuchs' dystrophy. Several hypotheses regarding the pathogenesis of Fuchs' dystrophy are discussed, including the possible influences of aberrant embryogenesis, hormones, and injury on the development of the disease. The current state of medical and surgical management is summarized, along with the future prospects for treatment.

Gingival reactions after experimentally induced extrusion of the upper incisors in monkeys

To evaluate the gingival movement with orthodontic tooth extrusion, the four upper incisors of monkeys were vertically extruded. The teeth were extruded (maximum 10.9 mm, minimum 2.6 mm) in five experimental subjects with three controls. The following parameters were measured before and after the experiments: (1) the movement of the free gingiva; (2) the movement of the mucogingival junction; (3) the clinical sulcus depth; and (4) the clinical crown height. The reaction of the gingival tissues attached to the extruded teeth was also examined histologically. The results were as follows: (1) The gingiva moved in the same direction in which the teeth were extruded. The free gingiva moved about 90% and the attached gingiva moved about 80% as far as the teeth were extruded. (2) The width of the attached gingiva on the labial surface increased as the teeth were extruded. (3) The sulcus depth decreased about 20% of the distance that the teeth were extruded; the clinical crown height was increased about 20%. (4) The mucogingival junction before the experiment was positioned the same after the experiment. (5) The epithelial attachment originated at the cementoenamel junction of the experimental teeth after the tooth extrusion. There was no gingival migration, gingival pocket formation, or inflammation on the labial surface. No clinical nor histologic problems were encountered in the gingival tissues if the teeth were extruded properly.

A re-evaluation of the distribution of the elastic meshwork within the periodontal ligament of the mouse

The elastic properties of the periodontal ligament have been attributed, in part, to oxytalan fibers, as no other types of elastic fibers are described there. It has been difficult to study the periodontal elastic meshwork by standard microscopic techniques because it is partially obscured by the adjacent periodontal ligament collagen fibers. Our study employed methods which either completely or partially removed mandibular molar periodontal ligament collagen fibers, exposing a previously undescribed periodontal elastic meshwork. The periodontal elastic meshwork was composed of many elastin lamellae containing both peripheral microfibrils of regular arrangement and central microfibrils of irregular arrangement, which could only be demonstrated in oxidized tissues. Peripheral, regularly arranged bundles of microfibrils resembled oxytalan fibers, which were often adherent to the border of the elastin lamella. Elastin lamellae containing irregular microfibrils resembled elaunin fibers. These fibers probably enclosed either blood vessels, nerves or collagen fiber bundles. Peripheral microfibrils attached elaunin to cementum, alveolar bone, blood vessels, and principal periodontal collagen fibers. Thus, the periodontal elastic meshwork is composed of both oxytalan and elaunin fibers. Microfibrils attach elaunin fibers to the adjacent non-elastic tissue and also form bundles which traverse the periodontal ligament space and are probably the oxytalan fibers demonstrable by light microscopic techniques. This meshwork of oxytalan and elaunin fibers probably contributes to tooth support and maintenance of periodontal homeostasis by dissipating chewing forces and maintaining patency of periodontal blood vessels.

Tooth movement

This article reviews the evolution of concepts regarding the biological foundation of force-induced tooth movement. Nineteenth century hypotheses proposed two mechanisms: application of pressure and tension to the periodontal ligament (PDL), and bending of the alveolar bone. Histologic investigations in the early and middle years of the 20th century revealed that both phenomena actually occur concomitantly, and that cells, as well as extracellular components of the PDL and alveolar bone, participate in the response to applied mechanical forces, which ultimately results in remodeling activities. Experiments with isolated cells in culture demonstrated that shape distortion might lead to cellular activation, either by opening plasma membrane ion channels, or by crystallizing cytoskeletal filaments. Mechanical distortion of collagenous matrices, mineralized or non-mineralized, may, on the other hand, evoke the development of bioelectric phenomena (stress-generated potentials and streaming potentials) that are capable of stimulating cells by altering the electric charge on their membrane or their fluid envelope. In intact animals, mechanical perturbations on the order of about 1 min/d are apparently sufficient to cause profound osteogenic responses, perhaps due to matrix proteoglycan-related "strain memory". Enzymatically isolated human PDL cells respond biochemically to mechanical and chemical signals. The latter include endocrines, autocrines, and paracrines. Histochemical and immunohistochemical studies showed that during the early places of tooth movement, PDL fluids are shifted, and cells and matrix are distorted. Vasoactive neurotransmitters are released from periodontal nerve terminals, causing leukocytes to migrate out of adjacent capillaries. Cytokines and growth factors are secreted by these cells, stimulating PDL cells and alveolar bone lining cells to remodel their related matrices. This remodeling activity facilitates movement of teeth into areas in which bone had been resorbed. This emerging information suggests that in the living mammal, many cell types are involved in the biological response to applied mechanical stress to teeth, and thereby to bone. Essentially, cells of the nervous, immune, and endocrine systems become involved in the activation and response of PDL and alveolar bone cells to applied stresses. This fact implies that research in the area of the biological response to force application to teeth should be sufficiently broad to include explorations of possible associations between physical, cellular, and molecular phenomena. The goals of this investigative field should continue to expound on fundamental principles, particularly on extrapolating new findings to the clinical environment, where millions of patients are subjected annually to applications of mechanical forces to their teeth for long periods of time in an effort to improve their position in the oral cavity.(ABSTRACT TRUNCATED AT 400 WORDS)

Response of the oral mucosa to denture wearing

This paper reviews both past and current knowledge concerning the controversial subject of mucosal responses associated with denture wearing. The subject has been considered in terms of both gross clinical and histopathological changes arising from daily prosthesis use. Displacement of basal seat tissues during function has been discussed, along with denture-induced alterations of the local microfloral ecosystems. The influences of common drugs and therapeutic regimens such as ionizing radiation treatments have been considered, and as with all the fields discussed, have been related to clinical use and success of prostheses.

An experimental study in dogs of transseptal fiber arrangement between teeth which have emerged in rotated or non-rotated positions

Transseptal fibers of the periodontal ligament are thought to play a role in relapse after orthodontic derotation. The aim of this study was to compare the location of the attachment site and the arrangement of the transseptal fibers in rotated emerged and non-rotated emerged teeth. In five dogs, unilaterally, the first upper premolars were replaced into a rotated position, before emergence. Histological evaluation showed that transseptal fibers developed in the experimental as well as in the control specimens. In all cases, transseptal fibers bridged the shortest distance between two adjacent teeth. It was concluded that the attachment site of the transseptal fibers was not determined by the tooth anatomy itself, but by the tooth position and its orientation in the dental arch during transseptal fiber development.

Distribution of 3H-proline within transseptal fibers of the rat following release of orthodontic forces

Maxillary right first molar teeth of rats were tipped mesially with an orthodontic appliance for 2 weeks (experimental group), 3H-proline was injected, and orthodontic forces were removed 6 hr later (time 0). The contralateral molar teeth of treated (internal control group) and age- and weight-matched untreated animals (external control group) were also studied. Diastemata were created between the molar teeth by the orthodontic appliance, and transseptal fibers between first and second (P less than 0.001) and second and third molars (P less than 0.005) were significantly lengthened as compared to external and internal controls at time 0. Diastemata between molar teeth were closed 5 days after removal of orthodontic force. Transseptal fibers adjacent to the source of the orthodontic force (mesial region) had the highest mean number of 3H-proline-labeled proteins at time 0 and at all times following removal of the force (P less than 0.001), and had the highest rate of labeled protein removal (P less than 0.001). Half-lives for removal of 3H-proline-labeled transseptal fiber proteins were significantly greater in mesial and distal regions and significantly less in middle regions of experimentals than in corresponding regions of external controls (P less than 0.001). These data suggest the following: 1) transseptal fibers adjust their length by rapid remodeling in regions experiencing a tensile force; 2) collagenous protein turnover within the middle third of the transseptal fibers is more rapid subsequent to release of orthodontic force than during normal physiologic drift, suggesting that this region adapts rapidly to changes in adjacent tooth position and that these fibers do not play a significant role in relapse of orthodontically relocated teeth; and 3) significant differences in turnover rates of 3H-proline-labeled transseptal ligament proteins of external and internal control quadrants suggest that tooth movement produces both local and systemic effects on collagenous protein metabolism.