Development of amperometric biosensors based on the immobilization of enzymes in polymer films electrogenerated from a series of amphiphilic pyrrole derivatives

Development of a New Amperometric Biosensor for Measurement of Plasma Galactose Levels

Galactosemia is an inherited disease that occurs as a result of insufficient or no synthesis of some enzymes (GALT, GALK, and GALE) in galactose metabolism. Failure to make an early diagnosis, especially in newborns, can lead to severe clinical and even fatal consequences. The aim of this study is to develop a biosensor for measuring free galactose in plasma. The immobilization components of the developed free galactose biosensor are screen printed carbon electrode (SCPE), Prussian blue (PB), chitosan (CHIT), Nafion (NAF), gold nanoparticle (GNP), and galactose oxidase (GaOX). The CHIT/GaOX/NAF-GNP/GaOX/CHIT-GNP/SCPE-PB electrode showed a sensitive amperometric response to detect galactose. While the surface characterization of the biosensor was performed with cyclic voltammetry and scanning electron microscopy, the optimization and performance characterizations were made by applying an amperometry technique. The amperometric operating potential for the free galactose biosensor was determined as -0.05 V. The linear detection range for the free galactose biosensor is between 0.025 and 10 mM. This range includes galactose levels in plasma of both healthy and patients. The percent coefficient of variation values calculated for intraday and interday repeatability of the developed biosensor are below 10%. The practical use of the biosensor, for which optimization and characterization studies were carried out, was tested in 10 healthy 11 patients with galactosemia, and the results were compared with the colorimetric method. In conclusion, the unique analytical properties and effortless preparation of the new galactose biosensor developed in this study make them serious candidates for point-of-care diagnostic testing.

Utilization of enzyme extract self-encapsulated within polypyrrole in sensitive detection of catechol

Utilization of polyphenol oxidases (laccase, tyrosinase) in biosensor technology is an efficient approach towards phenol detection, which is significant in numerous fields such as environmental monitoring, food industry etc. The use of crude extract instead of pure enzyme eliminates the need for costly and laborious processes of enzyme separation and purification. This study employs polyphenol oxidase extract, biosynthesized by white-rot fungi Trametes pubescens (TP) for the development of amperometric biosensors for catechol detection. The catalytic activity of the crude extract was firstly used to induce the bio-synthesis of conducting polymer - polypyrrole (Ppy), resulting in the self-encapsulation of the enzyme extract within the conducting material. The viability and biological integrity of the enzyme extract was preserved after the synthesis and was able to efficiently detect phenolic compounds such as catechol. Comparative evaluations between the biosynthesized Ppy based biosensor (bio-Ppy) and the biosensor based on bio-PPy with additional enzyme extract (bio-Ppy-TP) were performed. Lastly, the performance of these two biosensors was compared with that of a third one, based on chemically synthesized Ppy with enzyme extract (chem-Ppy-TP). All three types of biosensors proved high efficiency for catechol detection at low concentration (1-60 μM) and were employed for real sample detection in fruit wines showing linear correlation with the spectrophotometric results obtained with the Folin-Ciocalteau standard test.

Enzyme-based amperometric galactose biosensors: a review

This review (with 35 references) summarizes the various strategies used in biosensors for galactose, and their analytical performance. A brief comparison of the enzyme immobilization methods employed and the analytical performance characteristics of a range of galactose biosensors are first summarized in tabular form and then described in detail. Selected examples have been included to demonstrate the various applications of these biosensors to real samples. Following an introduction into the field that covers the significance of sensing galactose in various fields, the review covers biosensors based on the use of galactose oxidase, with a discussion of methods for their immobilization (via cross-linking, adsorption, covalent bonding and entrapment). This is followed by a short section on biosensors based on the use of galactose dehydrogenase. The conclusion section summarizes the state of the art and addresses current challenges. Graphical abstractFabrication of a disposable screen-printed (a) electrochemical galactose biosensor (b) for real sample analysis and a dummy biosensor

Modeling microelectrode biosensors: free-flow calibration can substantially underestimate tissue concentrations

Microelectrode biosensors are typically calibrated in a free-flow environment where the concentrations at the biosensor surface are constant. However, when in tissue, the analyte reaches the biosensor via diffusion and so analyte breakdown by the biosensor results in a concentration gradient and consequently a lower concentration around the biosensor. This effect means that naive free-flow calibration will underestimate tissue concentration. We develop mathematical models to better quantify the discrepancy between the calibration and tissue environment and experimentally verify our key predictions.

Microelectrode amperometric biosensors are widely used to measure concentrations of analytes in solution and tissue including acetylcholine, adenosine, glucose, and glutamate. A great deal of experimental and modeling effort has been directed at quantifying the response of the biosensors themselves; however, the influence that the macroscopic tissue environment has on biosensor response has not been subjected to the same level of scrutiny. Here we identify an important issue in the way microelectrode biosensors are calibrated that is likely to have led to underestimations of analyte tissue concentrations. Concentration in tissue is typically determined by comparing the biosensor signal to that measured in free-flow calibration conditions. In a free-flow environment the concentration of the analyte at the outer surface of the biosensor can be considered constant. However, in tissue the analyte reaches the biosensor surface by diffusion through the extracellular space. Because the enzymes in the biosensor break down the analyte, a density gradient is set up resulting in a significantly lower concentration of analyte near the biosensor surface. This effect is compounded by the diminished volume fraction (porosity) and reduction in the diffusion coefficient due to obstructions (tortuosity) in tissue. We demonstrate this effect through modeling and experimentally verify our predictions in diffusive environments.

NEW & NOTEWORTHY Microelectrode biosensors are typically calibrated in a free-flow environment where the concentrations at the biosensor surface are constant. However, when in tissue, the analyte reaches the biosensor via diffusion and so analyte breakdown by the biosensor results in a concentration gradient and consequently a lower concentration around the biosensor. This effect means that naive free-flow calibration will underestimate tissue concentration. We develop mathematical models to better quantify the discrepancy between the calibration and tissue environment and experimentally verify our key predictions.

Acetylcholinesterase biosensors for electrochemical detection of organophosphorus compounds: a review

The exponentially growing population, with limited resources, has exerted an intense pressure on the agriculture sector. In order to achieve high productivity the use of pesticide has increased up to many folds. These pesticides contain organophosphorus (OP) toxic compounds which interfere with the proper functioning of enzyme acetylcholinesterase (AChE) and finally affect the central nervous system (CNS). So, there is a need for routine, continuous, on spot detection of OP compounds which are the main limitations associated with conventional analytical methods. AChE based enzymatic biosensors have been reported by researchers as the most promising tool for analysis of pesticide level to control toxicity and for environment conservation. The present review summarises AChE based biosensors by discussing their characteristic features in terms of fabrication, detection limit, linearity range, time of incubation, and storage stability. Use of nanoparticles in recently reported fabrication strategies has improved the efficiency of biosensors to a great extent making them more reliable and robust.

Glutaraldehyde cross-linked glutamate oxidase coated microelectrode arrays: selectivity and resting levels of glutamate in the CNS

Glutaraldehyde is widely used as a cross-linking agent for enzyme immobilization onto microelectrodes. Recent studies and prior reports indicate changes in enzyme activity and selectivity with certain glutaraldehyde cross-linking procedures that may jeopardize the performance of microelectrode recordings and lead to falsely elevated responses in biological systems. In this study, the sensitivity of glutaraldehyde cross-linked glutamate oxidase-based microelectrode arrays to 22 amino acids was tested and compared to glutamate. As expected, responses to electroactive amino acids (Cys, Tyr, Trp) were detected at both nonenzyme-coated and enzyme-coated microelectrodes sites, while the remaining amino acids yielded no detectable responses. Electroactive amino acids were effectively blocked with a m-phenylene diamine (mPD) layer and, subsequently, no responses were detected. Preliminary results on the use of poly(ethylene glycol) diglycidyl ether (PEGDE) as a potentially more reliable cross-linking agent for the immobilization of glutamate oxidase onto ceramic-based microelectrode arrays are reported and show no significant advantages over glutaraldehyde as we observe comparable selectivities and responses. These results support that glutaraldehyde-cross-linked glutamate oxidase retains sufficient enzyme specificity for accurate in vivo brain measures of tonic and phasic glutamate levels when immobilized using specific "wet" coating procedures.

Carbon based electrodes modified with horseradish peroxidase immobilized in conducting polymers for acetaminophen analysis

The development and optimization of new biosensors with horseradish peroxidase immobilized in carbon nanotubes-polyethyleneimine or polypyrrole nanocomposite film at the surface of two types of transducer is described. The amperometric detection of acetaminophen was carried out at -0.2 V versus Ag/AgCl using carbon based-screen printed electrodes (SPEs) and glassy carbon electrodes (GCEs) as transducers. The electroanalytical parameters of the biosensors are highly dependent on their configuration and on the dimensions of the carbon nanotubes. The best limit of detection obtained for acetaminophen was 1.36 ± 0.013 μM and the linear range 9.99-79.01 μM for the HRP-SWCNT/PEI in GCE configuration. The biosensors were successfully applied for the detection of acetaminophen in several drug formulations.

Determination of sulfite with emphasis on biosensing methods: a review

Sulfite is used as a preservative in a variety of food and pharmaceutical industries to inhibit enzymatic and nonenzymatic browning and in brewing industries as an antibacterial and antioxidizing agent. Convenient and reproducible analytical methods employing sulfite oxidase are an attractive alternative to conventional detection methods. Sulfite biosensors are based on measurement of either O2 or electrons generated from splitting of H2O2 or heat released during oxidation of sulfite by immobilized sulfite oxidase. Sulfite biosensors can be grouped into 12 classes. They work optimally within 2 to 900 s, between pH 6.5 and 9.0, 25 and 40 °C, and in the range from 0 to 50,000 μM, with detection limit between 0.2 and 200 μM. Sulfite biosensors measure sulfite in food, beverages, and water and can be reused 100-300 times over a period of 1-240 days. The review presents the principles, merits, and demerits of various analytical methods for determination of sulfite, with special emphasis on sulfite biosensors.

Acetylcholinesterase inhibition-based biosensors for pesticide determination: a review

Pesticides released intentionally into the environment and through various processes contaminate the environment. Although pesticides are associated with many health hazards, there is a lack of monitoring of these contaminants. Traditional chromatographic methods-high-performance liquid chromatography, capillary electrophoresis, and mass spectrometry-are effective for the analysis of pesticides in the environment but have certain limitations such as complexity, time-consuming sample preparation, and the requirement of expensive apparatus and trained persons to operate. Over the past decades, acetylcholinesterase (AChE) inhibition-based biosensors have emerged as simple, rapid, and ultra-sensitive tools for pesticide analysis in environmental monitoring, food safety, and quality control. These biosensors have the potential to complement or replace the classical analytical methods by simplifying or eliminating sample preparation and making field-testing easier and faster with significant decrease in cost per analysis. This article reviews the recent developments in AChE inhibition-based biosensors, which include various immobilization methods, different strategies for biosensor construction, the advantages and roles of various matrices used, analytical performance, and application methods for constructing AChE biosensors. These AChE biosensors exhibited detection limits and linearity in the ranges of 1.0×10(-11) to 42.19 μM (detection limits) and 1.0×10(-11)-1.0×10(-2) to 74.5-9.9×10(3)μM (linearity). These biosensors were stable for a period of 2 to 120days. The future prospects for the development of better AChE biosensing systems are also discussed.

1-{2-Hydroxy-6-[3-(pyrrol-1-yl)propoxy]phenyl}ethanone

In the title compound, C₁₅H₁₇NO₃, the mean planes of the pyrrole and benzene rings form a dihedral angle of 81.92 (7)°. The mol­ecule contains an intra­molecular O—H⋯O hydrogen bond. In the crystal, weak C—H⋯π inter­actions link the mol­ecules into chains along [010].

Immobilization of tyrosinase on poly(indole-5-carboxylic acid) evidenced by electrochemical and spectroscopic methods

A conducting, polymeric film of poly(indole-5 carboxylic acid) has been prepared by electrochemical polymerization for covalent immobilization of an enzyme belonging to the family of phenoloxidases-tyrosinase. The polymer was characterized by cyclic voltammetry, UV-VIS and Raman spectroscopy in a buffer solution. As the polymer contains pendant carboxylic groups one-step carbodiimide method was used to immobilize tyrosinase on the polymer matrix. Immobilization of tyrosinase was confirmed by surface enhanced resonance Raman scattering spectra (SERRS) and by cyclic voltammetry as well. Tyrosinase was shown to retain its biological activity when being immobilized on the polymer surface. As proved by the electrochemical and spectroelectrochemical (UV-VIS) experiments, tyrosinase covalently bonded to the polymer matrix effectively catalyzes oxidation of catechol. The reduction current of o-quinones was measured as a function of catechol concentration. The linear dependence was found to be 15 microM of catechol with sensitivity of 250 mA/M cm2.

Amperometric detection of phenolic compounds by polypyrrole-based composite carbon paste electrodes

This contribution describes new composite carbon paste electrodes (CPEs) for the determination of phenolic compounds. The composite CPEs were prepared by in situ generation of polypyrrole (PPy) within a paste containing the enzyme polyphenol oxidase (PPO). The best paste composition (enzyme/pyrrole monomer/carbon particles/Nujol) was determined for a model enzyme, glucose oxidase (GOx) according to the enzymatic activity of the resulting electrodes and to the enzyme leakage from the paste during storage in phosphate buffer. The in situ electrogenerated PPy improves the enzyme immobilisation within the paste since practically no enzyme was lost in solution after 72 h of immersion. Moreover, the enzyme activity remains particularly stable under storage since the biocomposite structure conserves 80% of its activity after 1 month of storage. Following the optimisation of the paste composition, PPO-based carbon paste biosensors were prepared and presented excellent analytical properties toward catechol detection with a sensitivity of 4.7 A M(-1) cm(-2) and a response time lower than 20 s. The resulting biosensors were applied to the determination of polyphenolic compounds (e.g., epicatechin and ferulic acid).

Electrochemical behavior of riboflavin immobilized on different matrices

The electrochemical behavior of riboflavin (RF) adsorbed on different surfaces of inorganic matrices was investigated using modified carbon paste electrodes. Silica gel and sol-gel silica modified with niobium oxide were denominated as (SN) and (SN(sol-gel)), respectively. These materials were treated with a H3PO4 solution to graft phosphate groups and were denominated as (SNP) and (SNP(sol-gel)). The immobilization of RF on these materials indicated a high electrode stability, avoiding leaching out of the electroactive species (RF) from the electrode surface. The values of formal potential (E0') of the adsorbed RF on the different matrices changed from -283 (SNRF) up to -165 mV (SNPRF(sol-gel)) vs SCE in 0.1 moll(-1) NaNO3 solution at pH 7.0. Compared to the E0' for soluble RF, the values are shifted 183 up to 305 mV toward more positive potentials. The stability of the electrodes and the formal potential of the adsorbed RF on different matrices remained constant upon changing the solution pH from 3 to 8. Some kinetic parameters were estimated; indicating that all systems studied presented a good electron transfer rate.

Composite Carbon Paste Biosensor for Phenolic Derivatives Based on in Situ Electrogenerated Polypyrrole Binder

Amperometric biosensors based on new composite carbon paste (CPE) electrodes have been designed for the determination of phenolic compounds. The composite CPEs were prepared by in situ generation of polypyrrole (PPy) within a paste containing the enzyme polyphenol oxidase (PPO). The best paste composition (enzyme/pyrrole monomer/carbon particles/Nujol) was determined for a model enzyme, glucose oxidase, according to the enzymatic activity of the resulting electrodes and to the enzyme leakage from the paste during storage in phosphate buffer. The in situ electrogenerated PPy enables improvement in enzyme immobilization within the paste since practically no enzyme was lost in solution after 72 h of immersion. Moreover, the enzyme activity remains particularly stable under storage since the biocomposite structure maintains 80% of its activity after 1-month storage. Following the optimization of the paste composition, PPO-based carbon paste biosensors were prepared and presented excellent analytical properties toward catechol detection with a sensitivity of 4.7 A M(-1) cm(-2) and a response time lower than 20 s. The resulting biosensors were finally applied to the determination of epicatechin and ferulic acid as flavonol and polyphenol model, respectively.

Amperometric hydrogen peroxide biosensor with sol-gel/chitosan network-like film as immobilization matrix

A new type of sol-gel/organic hybrid composite material based on the cross-linking of natural polymer chitosan with (3-aoryloxypropyl) dimethoxymethylsilane was developed for the fabrication of an amperometric H(2)O(2) biosensor. The composite film was used to immobilize horseradish peroxidase (HRP) on a gold disk electrode. The properties of sol-gel/chitosan and sol-gel/chitosan-HRP films have been carefully characterized by atomic force microscopy and Fourier transform infrared. By using fluorescent label, a protein density on sol-gel/chitosan has been calculated to be 3.14 x 10(12) moleculescm(-2). With the aid of catechol mediator, the biosensor had a fast response of less than 2 s with linear range of 5.0 x 10(-9)-1.0 x 10(-7) mol l(-1) and a detection limit of 2 x 10(-9) mol l(-1). Its current response shows a typical Michaelis-Menten mechanism. The apparent Michaelis-Menten constant K(M)(app) is found to be 1.30 micromol l(-1). The activation energy for enzymatic reaction is calculated to be 8.22 kJ mol(-1). The biosensor retained approximately 75% of its original activity after about 60 days of storage in a phosphate buffer at 4 degrees C.

A three-enzyme microelectrode sensor for detecting purine release from central nervous system

As the purines, in particular adenosine, are important signaling agents in the nervous system we have devised a new biosensor for directly measuring their production in real time during physiological activity. Our amperometric adenosine biosensor is made by entrapping 3 enzymes (xanthine oxidase, purine nucleoside phosphorylase and adenosine deaminase) in a composite lactobionamide and amphiphillic polypyrrole matrix around a Pt microelectrode. The resulting sensors are small (25-100 microm diameter), fast responding (10-90% rise time, 2+/-0.23 s), sensitive (100-222 mA M(-1) cm(-2)) and stable (100% activity after 5 days). The sensor was used in vivo to demonstrate the spatial localization of release of adenosine from Xenopus embryo spinal cord during fictive swimming.

Biomolecule immobilization on electrode surfaces by entrapment or attachment to electrochemically polymerized films. A review

The concept and potentialities of electrochemical procedures of biomolecule immobilization based on electropolymerized films are described. The biomolecule entrapment in conventional electrogenerated polymers such as polypyrrole, polyaniline or polyphenol is compared with an electrochemical procedure involving the adsorption of amphiphilic monomers and biomolecules before the polymerization step. Examples of organic phase enzyme electrode and electrical wiring of immobilized enzymes are presented. Furthermore, the construction of controlled architectures based on spatially segregated multilayers, exhibiting complementary biological activities is described. Then, the use of functionalized polymers bearing functional groups for the covalent binding of biomolecules is reported. Moreover, the attachment of biomolecules to biotinylated polymers through affinity interactions based on avidin-biotin bridge is presented.