The mechanism of dextransucrase action. Direction of dextran biosynthesis

The quest for the perfect loaf of sourdough bread continues: Novel developments for selection of sourdough starter cultures

Sourdough fermentation, one of the oldest unit operations in food production, is currently experiencing a revival in bread production at the household, artisanal, and the industrial level. The expanding use of sourdough fermentation in bread production and the adaptation of fermentation to large scale industrial bread production also necessitate the development of novel starter cultures. Developments in the last years also have expanded the tools that are used to assess the metabolic potential of specific strains, species or genera of the Lactobacillaceae and have identified multiple ecological and metabolic traits as clade-specific. This review aims to provide an overview on the clade-specific metabolic potential of members of the Lactobacillaceae for use in sourdough baking, and the impact of these clade-specific traits on bread quality. Emphasis is placed on carbohydrate metabolism, including the conversion of sucrose and starch to soluble polysaccharides, conversion of amino acids, and the metabolism of organic acids. The current state of knowledge to compose multi-strain starter cultures (synthetic microbial communities) that are suitable for back-slopping will also be discussed. Taken together, the communication outlines the current tools for selection of microbes for use in sourdough baking.

Dextran Formulations as Effective Delivery Systems of Therapeutic Agents

Dextran is by far one of the most interesting non-toxic, bio-compatible macromolecules, an exopolysaccharide biosynthesized by lactic acid bacteria. It has been extensively used as a major component in many types of drug-delivery systems (DDS), which can be submitted to the next in-vivo testing stages, and may be proposed for clinical trials or pharmaceutical use approval. An important aspect to consider in order to maintain high DDS' biocompatibility is the use of dextran obtained by fermentation processes and with a minimum chemical modification degree. By performing chemical modifications, artefacts can appear in the dextran spatial structure that can lead to decreased biocompatibility or even cytotoxicity. The present review aims to systematize DDS depending on the dextran type used and the biologically active compounds transported, in order to obtain desired therapeutic effects. So far, pure dextran and modified dextran such as acetalated, oxidised, carboxymethyl, diethylaminoethyl-dextran and dextran sulphate sodium, were used to develop several DDSs: microspheres, microparticles, nanoparticles, nanodroplets, liposomes, micelles and nanomicelles, hydrogels, films, nanowires, bio-conjugates, medical adhesives and others. The DDS are critically presented by structures, biocompatibility, drugs loaded and therapeutic points of view in order to highlight future therapeutic perspectives.

A comprehensive review on mutan (a mixed linkage of α-1-3 and α-1-6 glucans) from bacterial sources

Mutan is an extracellular sticky polymer having α-1-3 and α-1-6 glycosidic linkages with a large diversity in molecular weights and structures depending on the source. These compounds are reported to be highly thermostable and also have potential physiochemical and biological applications. The main aim of this review is to provide an overview of glucosyltransferases and their role in mutan synthesis. The production strategies and structural properties of bacterial mutans are discussed with a goal to improve production efficiency. The physicochemical features, chemical modifications, potential industrial applications and future prospects are also discussed. According to data, mutan and its derivatives will play a larger role in medicinal sectors and as thermoplastics in the near future.Abbreviations: ABTS: 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid; BHI: Brain heart infusion broth; ¹³C (HSQC) NMR: Heteronuclear Single Quantum Coherence NMR; CBMs: Carbohydrate binding modules; DPPH: 2,2-diphenyl-1-picrylhydrazyl; FTIR: Fourier-transform infrared spectroscopy; GC-MS: Gas chromatography-mass spectrometry; GPC: Gel permeation chromatography; Gtfs: Glucosyltransferases; ¹H (DQF-COSY): Double-quantum filtered correlation spectroscopy; HPAEC-PAD: High-performance anion exchange chromatography with pulsed amperometric detection; HPLC: High performance liquid chromatography; HPSEC-RI: High-performance size exclusive chromatography coupled with refractive index; HPSEC-MALLS: High-performance size exclusive chromatography with multi-angle laser light scattering detection; MALDI-TOF: Matrix-Assisted Laser Desorption/Ionization-Time of Flight mass spectrometry; M_w: Weight-average molecular weight; MWD: Molecular weight distribution; NMR: Nuclear magnetic resonance spectroscopy; TEM: Transmission electron microscopy; THB: Todd Hewitt Broth; TTY: Tryticase tryptose yeast extract broth.

Single-Cell Microgels for Diagnostics and Therapeutics

Cell encapsulation within hydrogel droplets is transforming what is feasible in multiple fields of biomedical science such as tissue engineering and regenerative medicine, in vitro modeling, and cell-based therapies. Recent advances have allowed researchers to miniaturize material encapsulation complexes down to single-cell scales, where each complex, termed a single-cell microgel, contains only one cell surrounded by a hydrogel matrix while remaining <100 μm in size. With this achievement, studies requiring single-cell resolution are now possible, similar to those done using liquid droplet encapsulation. Of particular note, applications involving long-term in vitro cultures, modular bioinks, high-throughput screenings, and formation of 3D cellular microenvironments can be tuned independently to suit the needs of individual cells and experimental goals. In this progress report, an overview of established materials and techniques used to fabricate single-cell microgels, as well as insight into potential alternatives is provided. This focused review is concluded by discussing applications that have already benefited from single-cell microgel technologies, as well as prospective applications on the cusp of achieving important new capabilities.

Analysis of Structural and Functional Differences of Glucans Produced by the Natively Released Dextransucrase of Liquorilactobacillus hordei TMW 1.1822

The properties of the glucopolymer dextran are versatile and linked to its molecular size, structure, branching, and secondary structure. However, suited strategies to control and exploit the variable structures of dextrans are scarce. The aim of this study was to delineate structural and functional differences of dextrans, which were produced in buffers at different conditions using the native dextransucrase released by Liquorilactobacillus (L.) hordei TMW 1.1822. Rheological measurements revealed that dextran produced at pH 4.0 (MW = 1.1 * 108 Da) exhibited the properties of a viscoelastic fluid up to concentrations of 10% (w/v). By contrast, dextran produced at pH 5.5 (MW = 1.86 * 108 Da) was gel-forming already at 7.5% (w/v). As both dextrans exhibited comparable molecular structures, the molecular weight primarily influenced their rheological properties. The addition of maltose to the production assays caused the formation of the trisaccharide panose instead of dextran. Moreover, pre-cultures of L. hordei TMW 1.1822 grown without sucrose were substantial for recovery of higher dextran yields, since the cells stored the constitutively expressed dextransucrase intracellularly, until sucrose became available. These findings can be exploited for the controlled recovery of functionally diverse dextrans and oligosaccharides by the use of one dextransucrase type.

Increasing the dietary fiber contents in isomaltooligosaccharides by dextransucrase reaction with sucrose as a glucosyl donor

Isomaltooligosaccharides (IMOs) have been widely used as alternative sweeteners owing to their stabilities, low calorigenic, and prebiotic properties. The aim of this research was to improve the functionality of conventionally produced IMOs by increasing dietary fiber (DF) content with newly synthesized α-(1,6)-linkages through the dextransucrase reaction. To optimize the reaction conditions, various combinations of IMO and sucrose concentrations were applied as acceptor and donor molecules, respectively. Soluble DF content in the enzymatically-modified IMOs increased significantly with the initial substrate mixture of 10 % sucrose and 20 % IMOs; both DF and IMO contents increased to 35 % and 54 %, respectively. It was clearly suggested a simple dextransucrase-involved bioprocess could be applied to increase the DF content to the IMOs produced via a conventional process without scarifying the original IMO contents. Thus, it will be expected that the DF-enhanced IMO products are potentially applicable as functional ingredients as sugar substitutes in the food industry.

A systematic approach to study the pH-dependent release, productivity and product specificity of dextransucrases

Background

Dextransucrases are extracellular enzymes, which catalyze the formation of α-1→6-linked glucose polymers from sucrose. These enzymes are exclusively expressed by lactic acid bacteria, which commonly acidify the extracellular environment due to their physiology. Dextransucrases are thus confronted with steadily changing reaction conditions in regards to the environmental pH, which can further affect the amount of released dextransucrases. In this work, we studied the effect of the environmental pH on the release, the productivity and the product specificity of the dextransucrase expressed by Lactobacillus (L.) hordei TMW 1.1822. Dextransucrases were recovered as crude extracts at pH 3.5–pH 6.5 and then again used to produce dextrans at these pH values. The respectively produced dextran amounts and sizes were determined and the obtained results finally systematically correlated.

Results

Maximum dextran amounts were produced at pH 4.0 and pH 4.5, while the productivity of the dextransucrases significantly decreased at pH 3.5 and pH 6.5. The distribution of dextran amounts produced at different pH most likely reflects the pH dependent activity of the dextransucrases released by L. hordei, since different transglycosylation rates were determined at different pH using the same dextransucrase amounts. Moreover, similar hydrolysis activities were detected at all tested conditions despite significant losses of transglycosylation activities indicating initial hydrolysis prior to transglycosylation reactions. The molar masses and rms radii of dextrans increased up to pH 5.5 independently of the stability of the enzyme. The gelling properties of dextrans produced at pH 4.0 and pH 5.5 were different.

Conclusions

The presented methodological approach allows the controlled production of dextrans with varying properties and could be transferred and adapted to other microbes for systematic studies on the release and functionality of native sucrases or other extracellular enzymes.

Structure modeling and functional analysis of recombinant dextransucrase from Weissella confusa Cab3 expressed in Lactococcus lactis

The dextransucrase gene from Weissella confusa Cab3, having an open reading frame of 4.2 kb coding for 1,402 amino acids, was amplified, cloned, and expressed in Lactococcus lactis. The recombinant dextransucrase, WcCab3-rDSR was expressed as extracellular enzyme in M17 medium with a specific activity of 1.5 U/mg which after purification by PEG-400 fractionation gave 6.1 U/mg resulting in 4-fold purification. WcCab3-rDSR was expressed as soluble and homogeneous protein of molecular mass, approximately, 180 kDa as analyzed by SDS-PAGE. It displayed maximum enzyme activity at 35°C at pH 5.0 in 50 mM sodium acetate buffer. WcCab3-rDSR gave K_m of 6.2 mM and V_m of 6.3 µmol/min/mg. The characterization of dextran synthesized by WcCab3-rDSR by Fourier transform infrared and nuclear magnetic resonance spectroscopic analyses revealed the structural similarities with the dextran produced by the native dextransucrase. The modeled structure of WcCab3-rDSR using the crystal structures of dextransucrase from Lactobacillus reuteri (protein data bank, PDB id: 3HZ3) and Streptococcus mutans (PDB id: 3AIB) as templates depicted the presence of different domains such as A, B, C, IV, and V. The domains A and B are circularly permuted in nature having (β/α)₈ triose phosphate isomerase-barrel fold making the catalytic core of WcCab3-rDSR. The structure superposition and multiple sequence alignment analyses of WcCab3-rDSR with available structures of enzymes from family 70 GH suggested that the amino acid residue Asp510 acts as a nucleophile, Glu548 acts as a catalytic acid/base, whereas Asp621 acts as a transition-state stabilizer and these residues are found to be conserved within the family.

Characterization of new oligosaccharide converted from cellobiose by novel strain of Bacillus subtilis

Six bacterial strains isolated from various Korean fermented foods were cultured in cellobiose-containing medium to investigate their potential for producing new kind of oligosaccharides. After bacterial culture in a liquid medium, each culture medium was concentrated and analyzed. TLC analysis revealed that only one strain (Bacillus subtilis SS-76) produced new spot on the TLC plate, indicating that it could converts cellobiose into a new oligosaccharide. Following purification of the culture supernatant of B. subtilis SS-76, the fractions containing the oligosaccharide produced were pooled, and the concentrated fraction was analyzed for its chemical and structural characteristics. By using various analytical techniques such as sugar composition analysis, glycosidic linkage analysis, and molecular weight determination, the new oligosaccharide was identified as glucotriose connected with (1 → 4) and (1 → 3) glycosidic linkages. In addition, the result of specific enzyme catalysis suggested that the new glucotriose might contain only β-configurations in their anomeric configurations.

Immobilization of Glycoside Hydrolase Families GH1, GH13, and GH70: State of the Art and Perspectives

Glycoside hydrolases (GH) are enzymes capable to hydrolyze the glycosidic bond between two carbohydrates or even between a carbohydrate and a non-carbohydrate moiety. Because of the increasing interest for industrial applications of these enzymes, the immobilization of GH has become an important development in order to improve its activity, stability, as well as the possibility of its reuse in batch reactions and in continuous processes. In this review, we focus on the broad aspects of immobilization of enzymes from the specific GH families. A brief introduction on methods of enzyme immobilization is presented, discussing some advantages and drawbacks of this technology. We then review the state of the art of enzyme immobilization of families GH1, GH13, and GH70, with special attention on the enzymes β-glucosidase, α-amylase, cyclodextrin glycosyltransferase, and dextransucrase. In each case, the immobilization protocols are evaluated considering their positive and negative aspects. Finally, the perspectives on new immobilization methods are briefly presented.

Isolation and Structural Characterization of an Oligosaccharide Produced by Bacillus subtilis in a Maltose-Containing Medium

Among 116 bacterial strains isolated from Korean fermented foods, one strain (SS-76) was selected for producing new oligosaccharides in a basal medium containing maltose as the sole source of carbon. Upon morphological characterization using scanning electron microscopy, the cells of strain SS-76 appeared rod-shaped; subsequent 16S rRNA gene sequence analysis revealed that strain SS-76 was phylogenetically close to Bacillus subtilis. The main oligosaccharide fraction B extracted from the culture supernatant of B. subtilis SS-76 was purified by high performance liquid chromatography. Subsequent structural analysis revealed that this oligosaccharide consisted only of glucose, and methylation analysis indicated similar proportions of glucopyranosides in the 6-linkage, 4-linkage, and non-reducing terminal positions. Matrix-assisted laser-induced/ionization time-of-flight/mass spectrometry and electrospray ionization-based liquid chromatography-mass spectrometry/mass spectrometry analyses suggested that this oligosaccharide consisted of a trisaccharide unit with 1,6- and 1,4-glycosidic linkages. The anomeric signals in the (1)H-nuclear magnetic resonance spectrum corresponded to α-anomeric configurations, and the trisaccharide was finally identified as panose (α-D-glucopyranosyl-1,6-α-D-glucopyranosyl-1,4-D-glucose). These results suggest that B. subtilis SS-76 converts maltose into panose; strain SS-76 may thus find industrial application in the production of panose.

Powder lemon juice containing oligosaccharides obtained by dextransucrase acceptor reaction synthesis and dehydrated in sprouted bed

Oligosaccharides can be synthesized using the sugars present in the fruit juices through the dextransucrase acceptor reaction. In the present work, the effect of reducing sugar and sucrose concentration on oligosaccharide formation in lemon juice was evaluated through response surface methodology. The oligosaccharide formation in lemon juice was favored at high concentrations of sucrose (75 g/L) and reducing sugar (75 g/L). At this synthesis conditions, an oligosaccharide concentration of 94.81 g/L was obtained with a conversion of 63.21% of the initial sugars into the target product. Oligosaccharides with degree of polymerization up to 11 were obtained. The lemon juice was dehydrated in spouted bed using maltodextrin as drying adjuvant. The powder obtained at 60°C with 20 % maltodextrin presented low moisture (2.24 %), low water activity (Aw = 0.18) and the lowest reconstitution time (~46 s). The results showed that lemon juice is suitable for oligosaccharides enzyme synthesis and can be dehydrated in spouted bed.

Dextran synthesis by immobilized dextran sucrase

Dextran sucrase has been produced by fermentation of Leuconostoc mesenteroides NRRL B-512, with and without continuous sucrose addition to improve enzyme production. The enzyme preparation has been concentrated from the fermentation broth by ultrafiltration and purified by gel permeation chromatography on Ultrogel. The specific activity of the dextran sucrase was greatly enhanced by calcium chloride addition to the purified enzyme. This enzyme preparation has been immobilized by covalent coupling onto an amino porous silica support (Spherosil) activated with glutaraldehyde. Immobilized dextran sucrase derivatives with an activity up to 830 dextran sucrase units per g. support could thus be obtained. The effect of the support specific area on coupling efficiency and reaction kinetics has been investigated, and the effect of intraparticular diffusion underlined. The molecular weight distribution of the dextran has been determined when varying several parameters.

Emerging fermentation technologies: Development of novel sourdoughs

The increasing knowledge of sourdough fermentation generates new opportunities for its use in the bakery field. New fermentation technologies emerged through in depth sourdough research. Dextrans are extracellular bacterial polysaccharides produced mainly by lactic acid bacteria (LAB). These bacteria convert sucrose thanks to an inducible enzyme called dextransucrase into dextran and fructose. The structure of dextran depends on the producing micro-organism and on culture conditions. Depending on its structure, dextran has specific properties which lead to several industrial applications in different domains. The use of dextran is not widely spread in the bakery field even if its impact on bread volume and texture was shown. A new process has been developed to obtain a sourdough rich in dextran using a specific LAB strain able to produce a sufficient amount of HMW dextran assuring a significant impact on bread volume. The sourdough obtained permits to improve freshness, crumb structure, mouthfeel and softness of all kinds of baked good from wheat rich dough products to rye sourdough breads. From fundamental research on dextran technology, a new fermentation process has been developed to produce an innovative functional ingredient for bakery industry.

Understanding the polymerization mechanism of glycoside-hydrolase family 70 glucansucrases

Glucan formation catalyzed by two GH-family 70 enzymes, Leuconostoc mesenteroides NRRL B-512F dextransucrase and L. mesenteroides NRRL B-1355 alternansucrase, was investigated by combining biochemical and kinetic characterization of the recombinant enzymes and their respective products. Using HPAEC analysis, we showed that two molecules act as initiator of polymerization: sucrose itself and glucose produced by hydrolysis, the latter being preferred when produced in sufficient amounts. Then, elongation occurs by transfer of the glucosyl residue coming from sucrose to the non-reducing end of initially formed products. Dextransucrase preferentially produces an isomaltooligosaccharide series, whose concentration is always low because of the high ability of these products to be elongated and form high molecular weight dextran. Compared with dextransucrase, alternansucrase has a broader specificity. It produces a myriad of oligosaccharides with various alpha-1,3 and/or alpha-1,6 links in early reaction stages. Only some of them are further elongated. Overall alternan polymer is smaller in size than dextran. In dextransucrase, the A repeats often found in C-terminal domain of GH family 70 were found to play a major role in efficient dextran elongation. Their truncation result in an enzyme much less efficient to catalyze high molecular weight polymer formation. It is thus proposed that, in dextransucrase, the A repeats define anchoring zones for the growing chains, favoring their elongation. Based on these results, a semi-processive mechanism involving only one active site and an elongation by the non-reducing end is proposed for the GH-family 70 glucansucrases.

Structure-function relationships of glucansucrase and fructansucrase enzymes from lactic acid bacteria

Lactic acid bacteria (LAB) employ sucrase-type enzymes to convert sucrose into homopolysaccharides consisting of either glucosyl units (glucans) or fructosyl units (fructans). The enzymes involved are labeled glucansucrases (GS) and fructansucrases (FS), respectively. The available molecular, biochemical, and structural information on sucrase genes and enzymes from various LAB and their fructan and alpha-glucan products is reviewed. The GS and FS enzymes are both glycoside hydrolase enzymes that act on the same substrate (sucrose) and catalyze (retaining) transglycosylation reactions that result in polysaccharide formation, but they possess completely different protein structures. GS enzymes (family GH70) are large multidomain proteins that occur exclusively in LAB. Their catalytic domain displays clear secondary-structure similarity with alpha-amylase enzymes (family GH13), with a predicted permuted (beta/alpha)(8) barrel structure for which detailed structural and mechanistic information is available. Emphasis now is on identification of residues and regions important for GS enzyme activity and product specificity (synthesis of alpha-glucans differing in glycosidic linkage type, degree and type of branching, glucan molecular mass, and solubility). FS enzymes (family GH68) occur in both gram-negative and gram-positive bacteria and synthesize beta-fructan polymers with either beta-(2-->6) (inulin) or beta-(2-->1) (levan) glycosidic bonds. Recently, the first high-resolution three-dimensional structures have become available for FS (levansucrase) proteins, revealing a rare five-bladed beta-propeller structure with a deep, negatively charged central pocket. Although these structures have provided detailed mechanistic insights, the structural features in FS enzymes dictating the synthesis of either beta-(2-->6) or beta-(2-->1) linkages, degree and type of branching, and fructan molecular mass remain to be identified.

Starch biosynthesis: the primer nonreducing-end mechanism versus the nonprimer reducing-end two-site insertion mechanism

Two mechanisms are recognized for polysaccharide chain elongation: (a) the nonreducing-end, primer-dependent mechanism and (b) the reducing-end, two-site insertion mechanism. We recently demonstrated the latter mechanism for starch biosynthesis by pulsing starch granules with ADP-[14C]Glc and chasing with ADPGlc for eight varieties of starch granules. Others have reported the addition of glucose from ADPGlc to the nonreducing ends of maltose, maltotriose, and maltopentaose and a branched maltopentasaccharide. It was concluded that starch chains are biosynthesized by the addition of glucose to the nonreducing ends of maltodextrin primers. In this study, we reinvestigated the maltodextrin reactions by reacting three kinds of starch granules from maize, wheat, and rice with ADP-[14C]Glc in the absence and presence of maltose (G2), maltotriose (G3), and maltodextrin (d.p.12) and found that they inhibited starch biosynthesis rather than stimulating it, as would be expected for primers. The major product in the presence of G2 was G3 with decreasing amounts of G4-G9 and the major products in the presence of G3 was G4 and G5, with decreasing amounts of G6-G9. It was concluded that maltodextrins are acceptors rather than primers. This was confirmed by pulsing the starch granules with ADP-[14C]Glc and chasing with G2, G3, and G6, which gave release of 14C-label from the pulsed granules in the absence of ADPGlc, further demonstrating that maltodextrins are acceptors that inhibit starch biosynthesis by releasing glucose from starch synthase, rather than acting as primers and stimulating biosynthesis.

Biosynthesis of Hyaluronan

Hyaluronan (HA), a functionally essential glycosaminoglycan in vertebrate tissues and a putative virulence factor in certain pathogenic bacteria, is an extended linear polymer composed of alternating units of glucuronic acid (GlcUA) and N-acetylglucosamine (GlcNAc). Uncertainty regarding the mechanism of HA biosynthesis has included the directionality of chain elongation, i.e. whether addition of monosaccharide units occurs at the reducing or non-reducing terminus of nascent chains. We have investigated this problem using yeast-derived recombinant HA synthases from Xenopus laevis (xlHAS1) and from Streptococcus pyogenes (spHAS). The enzymes were incubated with UDP-[3H]GlcUA and UDP-[14C]GlcNAc, under experimental conditions designed to yield HA chains with differentially labeled reducing-terminal and non-reducing terminal domains. Digestion of the products with a mixture of beta-glucuronidase and beta-N-acetylglucosaminidase exoenzymes resulted in truncation of the HA chain strictly from the non-reducing end and release of labeled monosaccharides. The change in 3H/14C ratio of the monosaccharide fraction, during the course of exoglycosidase digestion, was interpreted to indicate whether sugar units had been added at the reducing or non-reducing end. The results demonstrate that the vertebrate xlHAS1 and the bacterial spHAS extend HA in opposite directions. Chain elongation catalyzed by xlHAS1 occurs at the non-reducing end of the HA chain, whereas elongation catalyzed by spHAS occurs at the reducing end. The spHAS is the first glycosyltransferase that has been unanimously demonstrated to function at the reducing end of a growing glycosaminoglycan chain.

Molecular Basis of the Amylose-like Polymer Formation Catalyzed by Neisseria polysaccharea Amylosucrase

Amylosucrase from Neisseria polysaccharea is a remarkable transglucosidase from family 13 of the glycoside-hydrolases that synthesizes an insoluble amylose-like polymer from sucrose in the absence of any primer. Amylosucrase shares strong structural similarities with alpha-amylases. Exactly how this enzyme catalyzes the formation of alpha-1,4-glucan and which structural features are involved in this unique functionality existing in family 13 are important questions still not fully answered. Here, we provide evidence that amylosucrase initializes polymer formation by releasing, through sucrose hydrolysis, a glucose molecule that is subsequently used as the first acceptor molecule. Maltooligosaccharides of increasing size were produced and successively elongated at their nonreducing ends until they reached a critical size and concentration, causing precipitation. The ability of amylosucrase to bind and to elongate maltooligosaccharides is notably due to the presence of key residues at the OB1 acceptor binding site that contribute strongly to the guidance (Arg415, subsite +4) and the correct positioning (Asp394 and Arg446, subsite +1) of acceptor molecules. On the other hand, Arg226 (subsites +2/+3) limits the binding of maltooligosaccharides, resulting in the accumulation of small products (G to G3) in the medium. A remarkable mutant (R226A), activated by the products it forms, was generated. It yields twice as much insoluble glucan as the wild-type enzyme and leads to the production of lower quantities of by-products.

Dextran molecular size and degree of branching as a function of sucrose concentration, pH, and temperature of reaction of Leuconostoc mesenteroides B-512FMCM dextransucrase

Reactions of Leuconostoc mesenteroides B-512FMCM dextransucrase with increasing concentrations of sucrose, from 0.1 to 4.0 M, gave a decreasing amount of high-molecular weight dextran (HMWD) (>10(6) Da) with a concomitant increase in low-molecular weight dextran (LMWD) (<10(5) Da). At 0.1 M sucrose, pH 5.5, and 28 degrees C, 99.8% of the dextran had a MW>10(6) Da and at 4.0 M sucrose, 69.9% had a MW<10(5) Da and 30.1% had a MW>10(6) Da, giving a bimodal distribution. The degree of branching increased from 5% for 0.1 M sucrose to 16.6% for 4.0 M sucrose. The temperature had very little effect on the size of the dextran, which was >10(6) Da, but it had a significant effect on the degree of branching, which was 4.8% at 4 degrees C and increased to 14.7% at 45 degrees C. Both the molecular weight (MW) and the degree of branching were not significantly affected by different pH values between 4.5 and 6.0.

Oligosaccharide synthesis by dextransucrase: new unconventional acceptors

The acceptor reactions of dextransucrase offer the potential for a targeted synthesis of a wide range of di-, tri- and higher oligosaccharides by the transfer of a glucosyl group from sucrose to the acceptor. We here report on results which show that the synthetic potential of this enzyme is not restricted to 'normal' saccharides. Additionally functionalized saccharides, such as alditols, aldosuloses, sugar acids, alkyl saccharides, and glycals, and rather unconventional saccharides, such as fructose dianhydride, may also act as acceptors. Some of these acceptors even turned out to be relatively efficient: alpha-D-glucopyranosyl-(1-->5)-D-arabinonic acid, alpha-D-glucopyranosyl-(1-->4)-D-glucitol, alpha-D-glucopyranosyl-(1-->6)-D-glucitol, alpha-D-glucopyranosyl-(1-->6)-D-mannitol, alpha-D-fructofuranosyl-beta-D-fructofuranosyl-(1,2':2,3')-dianhydride, 1,5-anhydro-2-deoxy-D-arabino-hex-1-enitol ('D-glucal'), and may therefore be of interest for future applications of the dextransucrase acceptor reaction.

Starch biosynthesis: mechanism for the elongation of starch chains

Starch granules from eight diverse plant sources all had active starch synthases and branching enzymes inside the granules. The enzymes synthesized both amylose and amylopectin from ADPGlc. Pulsing of the granules with ADP-[14C]Glc gave synthesis of starch that on reduction and glucoamylase hydrolysis gave 14C-labeled D-glucitol. The pulsed label could be chased by nonlabeled ADPGlc to give a significant decrease of 14C-label in D-glucitol. Evidence further indicated that the synthase forms a high-energy covalent complex with D-glucose and the growing starch chain, and that the D-glucopyranosyl group is added to the reducing end of the growing starch chain by a two-site insertion mechanism.

Building the wall: genes and enzyme complexes for polysaccharide synthases

The complete sequence of the Arabidopsis genome has revealed a total of 40 cellulose synthase (CesA) and cellulose synthase-like (Csl) genes. Recent studies suggest that each CESA polypeptide contains only one catalytic center, and that two or more polypeptides from different genes might be needed to form a functional cellulose synthase complex.

Reactor optimization for alpha-1,2 glucooligosaccharide synthesis by immobilized dextransucrase

The immobilization of dextransucrase in Ca-alginate beads relies on the close association between dextran polymer and dextransucrase. However, high amounts of dextran in the enzyme preparation drastically limit the specific activity of the immobilized enzyme (4 U/mL of alginate beads). Moreover, even in the absence of diffusion limitation at the batch conditions used, the enzyme behavior is modified by entrapment so that the dextran yield increases and the alpha-1,2 glucooligosaccharides (GOS) are produced with a lower yield (46.6% instead of 56.7%) and have a lower mean degree of polymerization than with the free dextransucrase. When the immobilized catalyst is used in a continuous reaction, the reactor flow rate necessary to obtain high conversion of the substrates is very low, leading to external diffusion resistance. As a result, dextran synthesis is even higher than in the batch reaction, and its accumulation within the alginate beads limits the operational stability of the catalyst and decreases glucooligosaccharide yield and productivity. This effect can be limited by using reactor columns with length to diameter ratio > or =20, and by optimizing the substrate concentrations in the feed solution: the best productivity obtained was 3.74 g. U(-1). h(-1), with an alpha-1,2 GOS yield of 36%.

Transglycosylation by Streptococcus mutans GS-5 glucosyltransferase-D: acceptor specificity and engineering of reaction conditions

The acceptor specificity of Streptococcus mutans GS-5 glucosyltransferase-D (GTF-D) was studied, particular the specificity toward non-saccharide compounds. Dihydroxy aromatic compounds like catechol, 4-methylcatechol, and 3-methoxycatechol were glycosylated by GTF-D with a high efficiency. Transglycosylation yields were 65%, 50%, and 75%, respectively, using 40 mM acceptor and 200 mM sucrose as glucosyl donor. 3-Methoxylcatchol was also glycosylated, though at a significantly lower rate. A number of other aromatic compounds such as phenol, 2-hydroxybenzaldehyde, 1,3-dihydroxybenzene, and 1, 2-phenylethanediol were not glycosylated by GTF-D. Consequently GTF-D aromatic acceptors appear to require two adjacent aromatic hydroxyl groups. In order to facilitate the transglycosylation of less water-soluble acceptors the use of various water miscible organic solvents (cosolvents) was studied. The flavonoid catechin was used as a model acceptor. Bis-2-methoxyethyl ether (MEE) was selected as a useful cosolvent. In the presence of 15% (v/v) MEE the specific catechin transglucosylation activity was increased 4-fold due to a 12-fold increase in catechin solubility. MEE (10-30% v/v) could also be used to allow the transglycosylation of catechol, 4-methylcatechol, and 3-methoxycatechol at concentrations (200 mM) otherwise inhibiting GTF-D transglycosylation activity.