2-Azidoethyl glycosides: glycosides potentially useful for the preparation of neoglycoconjugates

Design and synthesis of glycofullerene derivatives as novel photosensitizer for potential application in PDT to treat cancer

Cancer is one of the most aggressive diseases known to humanity, characterized by low survival rates and poor prognoses. Currently, platinum-based anticancer drugs and traditional photosensitizers used in photodynamic therapy (PDT) are the most widely employed treatment modalities. However, the platinum-based medications, particularly cisplatin, the most commonly used agent, have several drawbacks. These drawbacks may include systemic toxicity, which can manifest as nephrotoxicity, neurotoxicity, ototoxicity, or emesis during treatment. Such side effects can severely impair patients and significantly diminish the overall effectiveness of therapeutic interventions. In contrast, photodynamic therapy does not present these disadvantages. PDT offers numerous benefits, including reduced long-term morbidity, minimal systemic toxicity, low invasiveness, negligible drug resistance, and temporal and geographic selectivity, all of which enhance patients' quality of life. Consequently, the search for novel, effective, and practical photosensitizers is essential. Fullerenes possess unique physicochemical properties that make them highly suitable as photosensitizers. In this study, we developed a comprehensive and straightforward synthesis for two water-soluble sugar fullerene derivatives, designated as 12 and 13. Multiple analytical techniques, including 1H NMR, 13C NMR, high-resolution mass spectrometry (HRMS), Fourier-transform infrared spectroscopy (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy, collectively confirmed the chemical structures of these derivatives and validated their successful synthesis. Upon exposure to white light irradiation at an intensity of 2.5J/cm2, compound 13 demonstrated significant biological activity against three distinct tumor cell lines: HepG2, MKN45, and RPMI 4788, with IC50 values of 5.65 μM, 2.43 μM, and 1.82 μM, respectively. This study establishes a foundation for the development of innovative clinical photosensitizers.

Unusual triflic acid-promoted oligomerization of arabinofuranosides during glycosylation

We discovered an unusual triflic acid-promoted oligomerization of arabinofuranosides during glycosylation of the primary hydroxy group of α-(1 → 5)-linked tetraarabinofuranoside bearing 4-(2-chloroethoxy)phenyl aglycone with α-(1 → 5), β-(1 → 2)-linked tetraarabinofuranoside containing N-phenyltrifluoroacetimidoyl leaving group, which led to octa-, dodeca- and hexadecaarabinofuranosides. The possible mechanism of triflic acid-promoted oligomerization was proposed. The choice of promoter was found to be a critical factor for the discovered oligomerization of arabinofuranosides. The obtained octa-, dodeca- and hexadecaarabinofuranosides may serve as useful blocks in the synthesis of oligosaccharide fragments of polysaccharides of Mycobacterium tuberculosis.

Cu(I)-Catalyzed Click Chemistry in Glycoscience and Their Diverse Applications

Copper(I)-catalyzed 1,3-dipolar cycloaddition between organic azides and terminal alkynes, commonly known as CuAAC or click chemistry, has been identified as one of the most successful, versatile, reliable, and modular strategies for the rapid and regioselective construction of 1,4-disubstituted 1,2,3-triazoles as diversely functionalized molecules. Carbohydrates, an integral part of living cells, have several fascinating features, including their structural diversity, biocompatibility, bioavailability, hydrophilicity, and superior ADME properties with minimal toxicity, which support increased demand to explore them as versatile scaffolds for easy access to diverse glycohybrids and well-defined glycoconjugates for complete chemical, biochemical, and pharmacological investigations. This review highlights the successful development of CuAAC or click chemistry in emerging areas of glycoscience, including the synthesis of triazole appended carbohydrate-containing molecular architectures (mainly glycohybrids, glycoconjugates, glycopolymers, glycopeptides, glycoproteins, glycolipids, glycoclusters, and glycodendrimers through regioselective triazole forming modular and bio-orthogonal coupling protocols). It discusses the widespread applications of these glycoproducts as enzyme inhibitors in drug discovery and development, sensing, gelation, chelation, glycosylation, and catalysis. This review also covers the impact of click chemistry and provides future perspectives on its role in various emerging disciplines of science and technology.

Unexpected Reactions of Terminal Alkynes in Targeted "Click Chemistry'' Coppercatalyzed Azide-alkyne Cycloadditions

BACKGROUND

High efficiency in terms of reaction yield and purity has led to the extensive utilization of copper-catalyzed azide-alkyne cycloaddition (CuAAC) in various fields of chemistry. Its compatibility with low molecular weight alcohols promotes the application in surfactant synthesis to tackle the miscibility constraints of the reactants.

OBJECTIVE

For the tuning of surfactant properties, double click coupling of the antipode precursors was attempted. Failure of the CuAAC to provide the targeted product in combination with unexpected reaction outputs led to an investigation of the side reaction.

METHODS

The CuAAC-based coupling of sugar azide with propargyl building block in the presence of copper- (I) catalyst exclusively led to the mono-coupling product in a respectable yield of almost 80%. Besides the unexpected incomplete conversion, the loss of the remaining propargyl group, as indicated by both NMR and MS. On the other hand, application of substantial amounts of CuSO4 under reducing conditions in refluxing toluene/water furnished the alkyne dimer in a moderate yield of 43%, while no change of azide compound was noticed.

RESULTS

The Cu(I)-catalyst applied for azide-alkyne cycloadditions enables the homo-coupling of certain terminal alkynes at a higher temperature. Moreover, aromatic propargyl ethers may be cleaved to furnish the corresponding phenol. The copper-catalyzed coupling appeared highly sensitive towards the alkyne compound. Only selected derivatives of propargyl alcohol were successfully dimerized.

CONCLUSIONS

The observed failure of the Huisgen reaction for the synthesis of sugar-based surfactants may indicate non-recognized constrains of the reaction, which could affect its wide application in bioconjugation. The temperature requirement for the alternative dimerization of terminal alkynes renders this side reaction nonrelevant for typical click couplings, while narrow substrate diversity and moderate yield limit its synthetic application.

Sialylated keratan sulfate proteoglycans are Siglec-8 ligands in human airways

Human siglecs are a family of 14 sialic acid-binding proteins, most of which are expressed on subsets of immune cells where they regulate immune responses. Siglec-8 is expressed selectively on human allergic inflammatory cells—primarily eosinophils and mast cells—where engagement causes eosinophil apoptosis and inhibits mast cell mediator release. Evidence supports a model in which human eosinophils and mast cells bind to Siglec-8 sialoglycan ligands on inflammatory target tissues to resolve allergic inflammation and limit tissue damage. To identify Siglec-8-binding sialoglycans from human airways, proteins extracted from postmortem human trachea were resolved by size-exclusion chromatography and composite agarose–acrylamide gel electrophoresis, blotted and probed by Siglec-8-Fc blot overlay. Three size classes of Siglec-8 ligands were identified: 250 kDa, 600 kDa and 1 MDa, each of which was purified by affinity chromatography using a recombinant pentameric form of Siglec-8. Proteomic mass spectrometry identified all size classes as the proteoglycan aggrecan, a finding validated by immunoblotting. Glycan array studies demonstrated Siglec-8 binding to synthetic glycans with a terminal Neu5Acα2-3(6-sulfo)-Gal determinant, a quantitatively minor terminus on keratan sulfate (KS) chains of aggrecan. Treating human tracheal extracts with sialidase or keratanase eliminated Siglec-8 binding, indicating sialylated KS chains as Siglec-8-binding determinants. Treating human tracheal histological sections with keratanase also completely eliminated the binding of Siglec-8-Fc. Finally, Siglec-8 ligand purified from human trachea extracts induced increased apoptosis of freshly isolated human eosinophils in vitro. We conclude that sialylated KS proteoglycans are endogenous human airway ligands that bind Siglec-8 and may regulate allergic inflammation.

Diazirine-functionalized mannosides for photoaffinity labeling: trouble with FimH

Photoaffinity labeling is frequently employed for the investigation of ligand–receptor interactions in solution. We have employed an interdisciplinary methodology to achieve facile photolabeling of the lectin FimH, which is a bacterial protein, crucial for adhesion, colonization and infection. Following our earlier work, we have here designed and synthesized diazirine-functionalized mannosides as high-affinity FimH ligands and performed an extensive study on photo-crosslinking of the best ligand (mannoside 3) with a series of model peptides and FimH. Notably, we have employed high-performance mass spectrometry to be able to detect radiation results with the highest possible accuracy. We are concluding from this study that photolabeling of FimH with sugar diazirines has only very limited success and cannot be regarded a facile approach for covalent modification of FimH.

Synthesis and Characterization of Novel Fluoro-glycosylated Porphyrins that can be Utilized as Theranostic Agents

Small molecules with modalities for a variety of imaging techniques as well as therapeutic activity are essential, as such molecules render opportunities to simultaneously conduct diagnosis and targeted therapy, so called theranostics. In this regard, glycoporphyrins have proven useful as theranostic agents towards cancer, as well as noncancerous conditions. Herein, the synthesis and characterization of heterobifunctional glycoconjugated porphyrins with two different sugar moieties, a common monosaccharide at three sites, and a 2-fluoro-2-deoxy glucose (FDG) moiety at the fourth site are presented. The fluoro-glycoconjugated porphyrins exhibit properties for multimodal imaging and photodynamic therapy, as well as specificity towards cancer cells. We foresee that our findings might aid in the chemical design of heterobifunctional glycoconjugated porphyrins that could be utilized as theranostic agents.

Application of a Janus aglycon with dual function in benzyl-free synthesis of spacer-armed oligosaccharide fragments of polysaccharides from rhizobacterium Azospirillum brasilense sp7

Both protective and pre-spacer features of 4-(2-chloroethoxy)phenyl (CEP) aglycon, which belong to the class of Janus aglycons, were engaged in a benzyl-free synthesis of oligosaccharide fragments of polysaccharides from rhizobacterium Azospirillum brasilense sp7. Introduction of α-1,4-linked L-fucose residue was performed using 3,4-di-O-benzoyl-2-O-triisopropylsilyl-α-L-fucopyranosyl N-phenyltrifluoroacetimidate in excellent stereoselectivity and high yields. The obtained deprotected di-, tri- and tetrasaccharides contain 4-(2-azidoethoxy)phenyl (AEP) spacer aglycon, which allows straightforward preparation of neoglycoconjugates that will be used for the study of the role of lipopolysaccharide of rhizobacterium A. brasilense sp7 in plant-microbe symbiosis. The intermediate protected oligosaccharide building blocks with cleavable CEP/AEP aglycons have a strong potential for further application in the synthesis of more complex oligosaccharides.

Arabinofuranose 1,2,5-orthobenzoate as a single precursor of linear α(1 → 5)-linked oligoarabinofuranosides

Selectively protected mono-, di- and trisaccharide thioglycoside building blocks with unprotected primary hydroxy group at the non-reducing end, available in only one step from 3-O-benzoyl β-d-arabinofuranose 1,2,5-orthobenzoate, were used in the synthesis of linear α(1 → 5)-linked oligoarabinofuranosides up to octasaccharide. The obtained oligosaccharides contain 4-(2-chloroethoxy)phenyl (CEP) or 4-(2-azidoethoxy)phenyl (AEP) pre-spacer aglycons that allow preparation of neoglycoconjugates.

Synthesis of carbohydrate-scaffolded thymine glycoconjugates to organize multivalency

Multivalency effects are essential in carbohydrate recognition processes as occurring on the cell surface. Thus many synthetic multivalent glycoconjugates have been developed as important tools for glycobiological research. We are expanding this collection of molecules by the introduction of carbohydrate-scaffolded divalent glycothymine derivatives that can be intramolecularily dimerized by [2 + 2] photocycloaddition. Thus, thymine functions as a control element that allows to restrict the conformational flexibility of the scaffolded sugar ligands and thus to "organize" multivalency. With this work we add a parameter to multivalency studies additional to valency.

Synthesis and Characterisation of First Generation Luminescent Lanthanide Complexes Suitable for Being Adapted for Uptake via the Mannose Receptor

With the aim of directing lanthanide complex uptake via the mannose receptor, a first generation of luminescent lanthanide complexes has been developed with an α-D-mannose targeting motif. Four complexes were produced to investigate photophysical properties and determine the effect of the coordinated mannose residue on emission intensity. The free hydroxyls of the α-D-mannose residue quenched lanthanide phosphorescence due to their close proximity, though they did not bind the lanthanide centre as observed by q-values ≈1.0 for all complexes between pH 3 and 10. Fluorescent emission was found to vary significantly with pH, though phosphorescent emission was relatively insensitive to pH. This lack of pH sensitivity has the potential to provide stable emission for the visualisation of the endosome-lysosome system where acidic pH is often encountered.

Galactose-functionalized polyHIPE scaffolds for use in routine three dimensional culture of mammalian hepatocytes

Three-dimensional (3D) cell culture is regarded as a more physiologically relevant method of growing cells in the laboratory compared to traditional monolayer cultures. Recently, the application of polystyrene-based scaffolds produced using polyHIPE technology (porous polymers derived from high internal phase emulsions) for routine 3D cell culture applications has generated very promising results in terms of improved replication of native cellular function in the laboratory. These materials, which are now available as commercial scaffolds, are superior to many other 3D cell substrates due to their high porosity, controllable morphology, and suitable mechanical strength. However, until now there have been no reports describing the surface-modification of these materials for enhanced cell adhesion and function. This study, therefore, describes the surface functionalization of these materials with galactose, a carbohydrate known to specifically bind to hepatocytes via the asialoglycoprotein receptor (ASGPR), to further improve hepatocyte adhesion and function when growing on the scaffold. We first modify a typical polystyrene-based polyHIPE to produce a cell culture scaffold carrying pendent activated-ester functionality. This was achieved via the incorporation of pentafluorophenyl acrylate (PFPA) into the initial styrene (STY) emulsion, which upon polymerization formed a polyHIPE with a porosity of 92% and an average void diameter of 33 μm. Histological analysis showed that this polyHIPE was a suitable 3D scaffold for hepatocyte cell culture. Galactose-functionalized scaffolds were then prepared by attaching 2'-aminoethyl-β-D-galactopyranoside to this PFPA functionalized polyHIPE via displacement of the labile pentafluorophenyl group, to yield scaffolds with approximately ca. 7-9% surface carbohydrate. Experiments with primary rat hepatocytes showed that cellular albumin synthesis was greatly enhanced during the initial adhesion/settlement period of cells on the galactose-functionalized material, suggesting that the surface carbohydrates are accessible and selective to cells entering the scaffold. This porous polymer scaffold could, therefore, have important application as a 3D scaffold that offers enhanced hepatocyte adhesion and functionality.

[Monomers containing 2'-o-alkoxymethyl groups as synthons for the synthesis of oligoribonucleotides by the phosphotriester method]

A general scheme for the synthesis of ribonucleotide monomers containing alkoxymethyl group in 2'-O-position for the solid-phase phosphotriester oligonucleotide synthesis using O-nucleophilic intramolecular catalysis has been developed. In particular, the monomers containing 2'-O-modifying 2-azidoethoxymethyl, propargyloxymethyl, or 3,4-cyclocarbonatebutoxymethyl groups has been prepared.

Saccharide-functionalized alkanethiols for fouling-resistant self-assembled monolayers: synthesis, monolayer properties, and antifouling behavior

We describe the synthesis of a series of mono-, di-, and trisaccharide-functionalized alkanethiols as well as the formation of fouling-resistant self-assembled monolayers (SAMs) from these. The SAMs were characterized using ellipsometry, wetting measurements, and infrared reflection-absorption spectroscopy (IRAS). We show that the structure of the carbohydrate moiety affects the packing density and that this also alters the alkane chain organization. Upon increasing the size of the sugar moieties (from mono- to di- and trisaccharides), the structural qualities of the monolayers deteriorated with increasing disorder, and for the trisaccharide, slow reorganization dynamics in response to changes in the environmental polarity were observed. The antifouling properties of these SAMs were investigated through protein adsorption experiments from buffer solutions as well as settlement (attachment) tests using two common marine fouling species, zoospores of the green macroalga Ulva linza and cypris larvae of the barnacle Balanus amphitrite. The SAMs showed overall good resistance to fouling by both the proteins and the tested marine organisms. To improve the packing density of the SAMs with bulky headgroups, we employed mixed SAMs where the saccharide-thiols are diluted with a filler molecule having a small 2-hydroxyethyl headgroup. This method also provides a means by which the steric availability of sugar moieties can be varied, which is of interest for specific interaction studies with surface-bound sugars. The results of the surface dilution study and the low nonspecific adsorption onto the SAMs both indicate the feasibility of this approach.

Hexaphenylbenzene as a rigid template for the straightforward syntheses of "star-shaped" glycodendrimers

Original glycodendrimers emanating from propargylated hexaphenylbenzene cores and containing up to 54 peripheral sugar ligands have been synthesized by Cu(I)-catalyzed [1,3]-dipolar cycloadditions using both convergent and divergent approaches.

A bivalent glycopeptide to target two putative carbohydrate binding sites on FimH

FimH is a mannose-specific bacterial lectin found on type 1 fimbriae with a monovalent carbohydrate recognition domain (CRD) that is known from X-ray studies. However, binding studies with multivalent ligands have suggested an additional carbohydrate-binding site on this protein. In order to prove this hypothesis, a bivalent glycopeptide ligand with the capacity to bridge two putative carbohydrate binding sites on FimH was designed and synthesized. Anti-adhesion assays with the new bivalent ligand and type 1-fimbriated bacteria have revealed, that verification of the number of carbohydrate binding sites on FimH with a tailor-made bivalent glycopeptide requires further investigation to be conclusive.

Preparation of aminoethyl glycosides for glycoconjugation

The synthesis of a number of aminoethyl glycosides of cell-surface carbohydrates, which are important intermediates for glycoarray synthesis, is described. A set of protocols was developed which provide these intermediates, in a short number of steps, from commercially available starting materials.

Measurement of monovalent and polyvalent carbohydrate-lectin binding by back-scattering interferometry

Carbohydrate-protein binding is important to many areas of biochemistry. Here, backscattering interferometry (BSI) has been shown to be a convenient and sensitive method for obtaining quantitative information about the strengths and selectivities of such interactions. The surfaces of glass microfluidic channels were covalently modified with extravidin, to which biotinylated lectins were subsequently attached by incubation and washing. The binding of unmodified carbohydrates to the resulting avidin-immobilized lectins was monitored by BSI. Dose-response curves that were generated within several minutes and were highly reproducible in multiple wash/measure cycles provided adsorption coefficients that showed mannose to bind to concanavalin A (conA) with 3.7 times greater affinity than glucose consistent with literature values. Galactose was observed to bind selectively and with similar affinity to the lectin BS-1. The avidities of polyvalent sugar-coated virus particles for immobilized conA were much higher than monovalent glycans, with increases of 60-200 fold per glycan when arrayed on the exterior surface of cowpea mosaic virus or bacteriophage Qbeta. Sugar-functionalized PAMAM dendrimers showed size-dependent adsorption, which was consistent with the expected density of lectins on the surface. The sensitivity of BSI matches or exceeds that of surface plasmon resonance and quartz crystal microbalance techniques, and is sensitive to the number of binding events, rather than changes in mass. The operational simplicity and generality of BSI, along with the near-native conditions under which the target binding proteins are immobilized, make BSI an attractive method for the quantitative characterization of the binding functions of lectins and other proteins.

Mannosylated G(0) Dendrimers with Nanomolar Affinities toEscherichia coli FimH

Pentaerythritol and bis-pentaerythritol scaffolds were used for the preparation of first generation glycodendrimers bearing aryl alpha-D-mannopyranoside residues assembled using single-step Sonogashira and click chemistry. The carbohydrate precursors were built with either para-iodophenyl, propargyl, or 2-azidoethyl aglycones whereas the pentaerythritol moieties were built with terminal azide or propargyl groups, respectively. Cross-linking abilities of this series of glycodendrimers were first evaluated with the lectin from Canavalia ensiformis (Concanavalin A). Surface plasmon resonance measurements showed these two families of mannosylated clusters as the best ligands known to date toward Escherichia coli K12 FimH with subnanomolar affinities. Tetramer 4 had a K(d) of 0.45 nM. These clusters were 1000 times more potent than mannose for their capacity to inhibit the binding of E. coli to erythrocytes in vitro.