Exclusion of SP-C, but not SP-B, by gel phase palmitoyl lipids

Protein-promoted membrane domains

The current notion of biological membranes encompasses a very complex structure, made of dynamically changing compartments or domains where different membrane components partition. These domains have been related to important cellular functions such as membrane sorting, signal transduction, membrane fusion, neuronal maturation, and protein activation. Many reviews have dealt with membrane domains where lipid-lipid interactions direct their formation, especially in the case of raft domains, so in this review we considered domains induced by integral membrane proteins. The nature of the interactions involved and the different mechanisms through which membrane proteins segregate lipid domains are presented, in particular with regard to those induced by the nAChR. It may be concluded that coupling of favourable lipid-lipid and lipid-protein interactions is a general condition for this phenomenon to occur.

Content-dependent activity of lung surfactant protein B in mixtures with lipids

The content-dependent activity of surfactant protein (SP)-B was studied in mixtures with dipalmitoyl phosphatidylcholine (DPPC), synthetic lipids (SL), and purified phospholipids (PPL) from calf lung surfactant extract (CLSE). At fixed SP-B content, adsorption and dynamic surface tension lowering were ordered as PPL/SP-B approximately SL/SP-B > DPPC/SP-B. All mixtures were similar in having increased surface activity as SP-B content was incrementally raised from 0.05 to 0.75% by weight. SP-B had small but measurable effects on interfacial properties even at very low levels < or =0.1% by weight. PPL/SP-B (0.75%) had the highest adsorption and dynamic surface activity, approaching the behavior of CLSE. All mixtures containing 0.75% SP-B reached minimum surface tensions <1 mN/m in pulsating bubble studies at low phospholipid concentration (1 mg/ml). Mixtures of PPL or SL with SP-B (0.5%) also had minimum surface tensions <1 mN/m at 1 mg/ml, whereas DPPC/SP-B (0.5%) reached <1 mN/m at 2.5 mg/ml. Physiological activity also was strongly dependent on SP-B content. The ability of instilled SL/SP-B mixtures to improve surfactant-deficient pressure-volume mechanics in excised lavaged rat lungs increased as SP-B content was raised from 0.1 to 0.75% by weight. This study emphasizes the crucial functional activity of SP-B in lung surfactants. Significant differences in SP-B content between exogenous surfactants used to treat respiratory disease could be associated with substantial activity variations.

Palmitoylation and processing of the lipopeptide surfactant protein C

Pulmonary surfactant, a mixture of lipids and proteins, reduces the surface tension at the air-water interface of the lung alveoli by forming a surface active film. This way, it prevents alveoli from collapsing and facilitates the work of breathing. Surfactant protein C (SP-C) plays an important role in this surfactant function. SP-C is expressed as a proprotein (proSP-C), which becomes posttranslationally modified with palmitate and undergoes several rounds of proteolytical cleavage. This results in the formation of mature SP-C, which is stored in the lamellar bodies (LB) and finally secreted into the alveolar space. Recently, new insights into the sorting, processing and palmitoylation of proSP-C have been obtained by mutagenesis studies. Moreover, reports on the association of development of lung disease with SP-C deficiency have led to new insights into the importance of SP-C for proper surfactant homeostasis. In addition, new information has become available on the role of the palmitoyl chains of SP-C in surface activity. This review summarizes these recent developments in the processing and function of SP-C, with particular emphasis on the signals for and role of palmitoylation of SP-C.

Functional Tests for the Characterization of Surfactant Protein B (SP-B) and a Fluorescent SP-B Analog

Surfactant protein B (SP-B) enhances lipid insertion into the alveolar air/liquid interface upon inhalation. The aim of this study was (i) to apply a palette of tests for a detailed biochemical and biophysical characterization of SP-B and (ii) to use these tests to compare native SP-B with a fluorescent (Bodipy) SP-B analog. The method of labeling was fast and resulted in a covalent fluorophore-protein bond. The ability of both proteins to spread a surfactant film on top of a buffer surface was determined in a spreading tray using the Wilhelmy plate technique to allow detection of alterations in surface tension and calculation of spreading velocities. In a captive bubble surfactometer surface tensions of spread films were measured. Similar biophysical properties were found for both native and Bodipy-labeled SP-B. It is concluded that the combination of tests used allows detection of small differences in structure and activity between the two proteins.

Consequences of hydrophobic mismatch between lipids and melibiose permease on melibiose transport

The structural and functional consequences of a mismatch between the hydrophobic thickness d(P) of a transmembrane protein and that d(L) of the supporting lipid bilayer were investigated using melibiose permease (MelB) from Escherichia coli reconstituted in a set of bis saturated and monounsaturated phosphatidylcholine species differing in acyl-chain length. Influence of MelB on the midpoint gel-to-liquid-phase transition temperature, T(m), of the saturated lipids was investigated through fluorescence polarization experiments, with 1,6-diphenyl-1,3,5-hexatriene as the probe, for varying protein/lipid molar ratio. Diagrams in temperature versus MelB concentration showed positive or negative shifts in T(m) with the short-chain lipids DiC12:0-PC and DiC14:0-PC or the long-chain lipids DiC16:0-PC and DiC18:0-PC, respectively. Theoretical analysis of the data yielded a d(L) value of 3.0 +/- 0.1 nm for the protein, similar to the 3.02 nm estimated from hydropathy profiles. Influence of the acyl chain length on the carrier activity of MelB was investigated in the liquid phase, using the monounsaturated PCs. Binding of the sugar to the transporter showed no dependence on the acyl chain length. In contrast, counterflow and Deltapsi-driven experiments revealed strong dependence of melibiose transport on the lipid acyl chain length. Similar bell-shaped transport versus acyl chain length profiles were obtained, optimal activity being supported by diC16:1-PC. On account of a d(P) value of 2.65 nm for the lipid and of various local constraints which would all tend to elongate the acyl chains in contact with the protein, one can conclude that maximal activity was obtained when the hydrophobic thickness of the bilayer matched that of the protein.

Is the protein/lipid hydrophobic matching principle relevant to membrane organization and functions?

Biological membranes are complex and well-organized multimolecular assemblies composed of a wide variety of protein and lipid molecular species. If such a diversity in protein and lipid polar headgroup structures may easily be related to a large panel of functions, the wide dispersion in acyl chain length and structure which the lipids display is more difficult to understand. It is not required for maintaining bilayer assembly and fluidity. Direct information on the lateral distribution of these various molecular species, on their potential specificity for interaction between themselves and with proteins and on the functional implications of these interactions is also still lacking. Because hydrophobic interactions play a major role in stabilizing membrane structures, we suggest considering the problem from the point of view of the matching of the hydrophobic surface of proteins by the acyl chains of the lipids. After a brief introduction to the hydrophobic matching principle, we will present experimental results which demonstrate the predictive power of the current theories and then, we will introduce the new and important concept of protein/lipid sorting in membranes. Finally, we will show how the hydrophobic matching condition may play a key role in the membrane organization and function.

Structure and properties of surfactant protein C

Pulmonary surfactant contains less than 1 wt% of the very non-polar surfactant protein C (SP-C). In most animal species the major form of SP-C is a 35-residue peptide chain which contains two thioester-linked palmitoyl groups, giving a total molecular mass of 4.2 kDa. Several minor variants of SP-C exist, formed from N-terminal truncation, lysine palmitoylation, methionine oxidation and C-terminal esterification. The primary structure is evolutionarily conserved and SP-C appears to be the only constituent which is unique to pulmonary surfactant, indicating important and specific functions. The three-dimensional structure in an aqueous mixed organic solvent determined by NMR spectroscopy revealed one continuous 37 A long alpha-helix encompassing residues 9-34 as the only regular structural element. The central 23 A of the helix contains exclusively aliphatic residues with branched side-chains, mainly valines, and exposes an all-hydrophobic regular surface. The size of the entire helix perfectly matches the thickness of a fluid dipalmitoylphosphatidylcholine membrane, and the all-hydrophobic part of the helix matches the acyl-chain part of such a bilayer. This supports a transmembrane orientation of SP-C in pulmonary surfactant bilayers. In a phospholipid monolayer, the SP-C helix is tilted, thereby maximizing the interactions with the lipid acyl-chains also in this environment. The palmitoylcysteines of SP-C, which are located in the flexibly disordered N-terminal octapeptide segment, appear to be important both for integrity of the alpha-helical structure and for functional properties. Since the conformation of the N-terminal part in a phospholipid environment is not known, the mechanisms whereby the SP-C thioester-linked palmitoyl chains affect structure and function remain to be determined.

Theoretical analysis of protein organization in lipid membranes

The fundamental physical principles of the lateral organization of trans-membrane proteins and peptides as well as peripheral membrane proteins and enzymes are considered from the point of view of the lipid-bilayer membrane, its structure, dynamics, and cooperative phenomena. Based on a variety of theoretical considerations and model calculations, the nature of lipid-protein interactions is considered both for a single protein and an assembly of proteins that can lead to aggregation and protein crystallization in the plane of the membrane. Phenomena discussed include lipid sorting and selectivity at protein surfaces, protein-lipid phase equilibria, lipid-mediated protein-protein interactions, wetting and capillary condensation as means of protein organization, mechanisms of two-dimensional protein crystallization, as well as non-equilibrium organization of active proteins in membranes. The theoretical findings are compared with a variety of experimental data.

Differential partitioning of pulmonary surfactant protein SP-A into regions of monolayers of dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylcholine/dipalmitoylphosphatidylglycerol

The interaction of the pulmonary surfactant protein SP-A fluorescently labeled with Texas Red (TR-SP-A) with monolayers of dipalmitoylphosphatidylcholine (DPPC) and DPPC/dipalmitoylphosphatidylglycerol 7:3 w/w has been investigated. The monolayers were spread on aqueous subphases containing TR-SP-A. TR-SP-A interacted with the monolayers of DPPC to accumulate at the boundary regions between liquid condensed (LC) and liquid expanded (LE) phases. Some TR-SP-A appeared in the LE phase but not in the LC phase. At intermediate surface pressures (10-20 mN/m), the protein caused the occurrence of more, smaller condensed domains, and it appeared to be excluded from the monolayers at surface pressure in the range of 30-40 mN/m. TR-SP-A interaction with DPPC/dipalmitoylphosphatidylglycerol monolayers was different. The protein did not appear in either LE or LC but only in large aggregates at the LC-LE boundary regions, a distribution visually similar to that of fluorescently labeled concanavalin A adsorbed onto monolayers of DPPC. The observations are consistent with a selectivity of interaction of SP-A with DPPC and for its accumulation in boundaries between LC and LE phase.

Molecular sorting of lipids by bacteriorhodopsin in dilauroylphosphatidylcholine/distearoylphosphatidylcholine lipid bilayers

A combined experimental and theoretical study is performed on binary dilauroylphosphatidylcholine/distearoylphosphatidylcholine (DLPC/DSPC) lipid bilayer membranes incorporating bacteriorhodopsin (BR). The system is designed to investigate the possibility that BR, via a hydrophobic matching principle related to the difference in lipid bilayer hydrophobic thickness and protein hydrophobic length, can perform molecular sorting of the lipids at the lipid-protein interface, leading to lipid specificity/selectivity that is controlled solely by physical factors. The study takes advantage of the strongly nonideal mixing behavior of the DLPC/DSPC mixture and the fact that the average lipid acyl-chain length is strongly dependent on temperature, particularly in the main phase transition region. The experiments are based on fluorescence energy transfer techniques using specifically designed lipid analogs that can probe the lipid-protein interface. The theoretical calculations exploit a microscopic molecular interaction model that embodies the hydrophobic matching as a key parameter. At low temperatures, in the gel-gel coexistence region, experimental and theoretical data consistently indicate that BR is associated with the short-chain lipid DLPC. At moderate temperatures, in the fluid-gel coexistence region, BR remains in the fluid phase, which is mainly composed of short-chain lipid DLPC, but is enriched at the interface between the fluid and gel domains. At high temperatures, in the fluid phase, BR stays in the mixed lipid phase, and the theoretical data suggest a preference of the protein for the long-chain DSPC molecules at the expense of the short-chain DLPC molecules. The combined results of the experiments and the calculations provide evidence that a molecular sorting principle is active because of hydrophobic matching and that BR exhibits physical lipid selectivity. The results are discussed in the general context of membrane organization and compartmentalization and in terms of nanometer-scale lipid-domain formation.

Small-scale lipid-membrane structure: simulation versus experiment

Recently, it has become obvious that the conventional picture of the fluid lipid-bilayer component of biological membranes being a fairly structureless 'fluid mosaic' solvent is far from correct. The lipid bilayer displays distinct static and dynamic structural organization on a small scale, for example in terms of differentiated lipid domains, and evidence is accumulating that these structures are of importance for the functioning of biological membranes, including the activity of membrane-bound enzymes and receptors and morphological changes at the cell surface. Insight into the relationship between this small-scale structure and biological functioning holds promise for a more rational approach to modulate function via manipulation of the lipid microenvironment and the lipid/protein interface in particular. Computer simulation has proved to be a useful tool in investigating membrane structure on a small scale-specifically the nanometer scale (1-100 nm), which is in between the molecular scale accessible by various spectroscopic techniques and molecular dynamics calculations, and the micrometer scale accessible by scattering and microscopy techniques.

Combinations of fluorescently labeled pulmonary surfactant proteins SP-B and SP-C in phospholipid films

Hydrophobic pulmonary surfactant (PS) proteins B (SP-B) and C (SP-C) modulate the surface properties of PS lipids. Epifluorescence microscopy was performed on solvent-spread monolayers of fluorescently labeled porcine SP-B (R-SP-B, labeled with Texas Red) and SP-C (F-SP-C, labeled with fluorescein) in dipalmitoylphosphatidylcholine (DPPC) (at protein concentrations of 10 and 20 wt%, and 10 wt% of both) under conditions of cyclic compression and expansion. Matrix-assisted laser desorption/ionization (MALDI) spectroscopy of R-SP-B and F-SP-C indicated that the proteins were intact and labeled with the appropriate fluorescent probe. The monolayers were compressed and expanded for four cycles at an initial rate of 0.64 A2 x mol(-1) x s(-1) (333 mm2 x s x [-1]) up to a surface pressure pi approximately 65 mN/m, and pi-area per residue (pi-A) isotherms at 22 +/- 1 degrees C were obtained. The monolayers were microscopically observed for the fluorescence emission of the individual proteins present in the film lipid matrix, and their visual features were video recorded for image analysis. The pi-A isotherms of the DPPC/protein monolayers showed characteristic "squeeze out" effects at pi approximately 43 mN/m for R-SP-B and 55 mN/m for F-SP-C, as had previously been observed for monolayers of the native proteins in DPPC. Both proteins associated with the expanded (fluid) phase of DPPC monolayers remained in or associated with the monolayers at high pi (approximately 65 mN/m) and redispersed in the monolayer upon its reexpansion. At comparable pi and area/molecule of the lipid, the proteins reduced the amounts of condensed (gel-like) phase of DPPC monolayers, with F-SP-C having a greater effect on a weight basis than did R-SP-B. In any one of the lipid/protein monolayers the amounts of the DPPC in condensed phase were the same at equivalent pi during compression and expansion and from cycle to cycle. This indicated that only minor loss of components from these systems occurred between compression-expansion cycles. This study indicates that hydrophobic PS proteins associate with the fluid phase of DPPC in films, some proteins remain at high surface pressures in the films, and such lipid-protein films can still attain high pi during compression.

Molecular structures and interactions of pulmonary surfactant components

The dominating functional property of pulmonary surfactant is to reduce the surface tension at the alveolar air/liquid interface, and thereby prevent the lungs from collapsing at the end of expiration. In addition, the system exhibits host-defense properties. Insufficient amounts of pulmonary surfactant in premature infants causes respiratory distress syndrome, a serious threat which nowadays can be effectively treated by airway instillation of surfactant preparations. Surfactant is a mixture of many molecular species, mainly phospholipids and specific proteins, surfactant protein A (SP-A), SP-B, SP-C and SP-D. SP-A and SP-D are water-soluble and belong to the collectins, a family of large multimeric proteins which structurally exhibit collagenous/lectin hybrid properties and functionally are Ca2+-dependent carbohydrate binding proteins involved in innate host-defence functions. SP-A and SP-D also bind lipids and SP-A is involved in organization of alveolar surfactant phospholipids. SP-B belongs to another family of proteins, which includes also lipid-interacting polypeptides with antibacterial and lytic properties. SP-B is a 17.4-kDa homodimer and each subunit contains three intrachain disulphides and has been proposed to contain four amphipathic helices oriented pairwise in an antiparallel fashion. SP-A, SP-B and SP-D all have been detected also in the gastrointestinal tract. SP-C, in contrast, appears to be a unique protein with extreme structural and stability properties and to exist exclusively in the lungs. SP-C is a lipopeptide containing covalently linked palmitoyl chains and is folded into a 3.7-nm alpha-helix with a central 2.3-nm all-aliphatic part, making it perfectly suited to interact in a transmembranous way with a fluid bilayer composed of dipalmitoylglycerophosphocholine, the main component of surfactant. Homozygous genetic deficiency of proSP-B causes lethal respiratory distress soon after birth and is associated with aberrant processing of the precursor of SP-C. This review focuses on the chemical composition, structures and interactions of the pulmonary surfactant, in particular the associated proteins.

Acylation of pulmonary surfactant protein-C is required for its optimal surface active interactions with phospholipids

This study investigates the importance of thioester-linked acyl groups in lung surfactant protein C (SP-C) in facilitating interactions with phospholipids that yield functionally important surface active behaviors. Native SP-C, palmitoylated at cysteine residues at positions 5 and 6, was isolated from bovine lung surfactant by liquid chromatography. Deacylated SP-C (dSP-C), unchanged in composition and sequence from SP-C but having a decreased alpha-helical content in films with dipalmitoyl phosphatidylcholine (DPPC) of 52 versus 70%, was obtained by treatment with 0.1 M sodium carbonate buffer at pH 10. Surface activity was studied for SP-C and dSP-C combined with column-purified phospholipids (PPL) from calf lung surfactant or with synthetic phospholipids (DPPC or a synthetic phospholipid mixture (SPL) containing 50:35:15, DPPC:egg phosphatidylcholine:egg phosphatidylglycerol). Interfacial measurements included surface pressure time adsorption isotherms for dispersed surfactants with diffusion minimized, dynamic surface pressure area isotherms and respreading for films in the Wilhelmy balance, and overall surface tension lowering at physiologic cycling rate in oscillating bubble experiments. Dispersions of PPL:SP-C and SPL:SP-C rapidly adsorbed to high equilibrium surface pressures of 47-48 mN/m, significantly better than corresponding dispersions containing dSP-C. The adsorption of PPL:dSP-C was essentially unchanged from that of PPL alone, and the adsorption of SPL:dSP-C was improved only slightly over SPL alone. In Wilhelmy balance studies, dynamic respreading was significantly improved over phospholipids alone in films of SP-C plus PPL, SPL, or DPPC. Respreading was improved less markedly by dSP-C in corresponding films with SPL or DPPC and not at all in films with PPL. Maximum surface pressures were also higher in cycled films of SP-C versus dSP-C combined with PPL or SPL. In bubble experiments (37 degrees C, 20 cycles/min), dispersions of PPL:SP-C and SPL:SP-C reached low minimum surface tensions of <1 and 5 mN/m, respectively, whereas PPL:dSP-C and SPL:dSP-C only reached minima of approximately 20 mN/m as did PPL and SPL alone. Acylation in SP-C is crucial for its interactions with phospholipids over the full spectrum of adsorption and dynamic surface behaviors important for lung surfactant.