Progesterone-releasing vaginal rings for use in postpartum contraception. I. In vitro release rates of progesterone from core-loaded rings

In vitro drug release, mechanical performance and stability testing of a custom silicone elastomer vaginal ring releasing dapivirine and levonorgestrel

We have previously reported a multipurpose silicone elastomer vaginal ring providing sustained release of dapivirine (an antiretroviral) and levonorgestrel (a progestin) for HIV prevention and hormonal contraception. During initial development, issues arose due to reaction between the ethynyl group in the levonorgestrel molecule and the hydride-functionalised polydimethylsiloxane components in the silicone elastomer formulation. This unwanted reaction occurred both during and to a lesser extent after ring manufacture, impacting the curing process, the mechanical properties of the ring, and the in vitro release of levonorgestrel. Recently, we reported custom silicone elastomer grades that minimise this reaction. In this follow-on study, we describe the manufacture, in vitro drug release, mechanical, and pharmaceutical stability testing of ring formulations prepared from a custom silicone elastomer and containing 200 mg dapivirine and 80, 160, 240 or 320 mg levonorgestrel. The rings showed mechanical properties similar to marketed ring products, sustained in vitro release of both drugs over 30 days in quantities deemed clinically relevant, offered acceptable assay values, and provided good product stability over 15 weeks at 40 °C and 75% relative humidity.

Pharmacokinetics and tolerability of a novel progesterone intravaginal ring in sheep

The objectives of this work were to evaluate the in vitro release and in vivo pharmacokinetics and local tolerability of a novel, segmented ethylene-vinyl acetate (EVA) intravaginal ring (IVR) delivering progesterone (P) in drug-naïve ovariectomized female Dorset crossbred sheep. Following preparation and assessment of in vitro release of P, animals were randomized into one of six treatment groups: group 1 Crinone® 8% gel (90 mg); group 2 Prometrium® 200-mg capsules; group 3 placebo IVR; group 4 progesterone (P) IVR 4 mg/day; group 5 P IVR 8 mg/day; or group 6 P IVR 12 mg/day. Crinone 8% gel and Prometrium capsules were administered once daily for 28 days. IVRs were inserted vaginally on day 1 and remained in place through day 14; a new ring was administered on day 15 and was removed at day 28. Animals underwent daily examinations to confirm ring placement, and vaginal irritation was scored from 0 (none) to 4 (severe). Blood samples were taken at scheduled times for pharmacokinetic analysis. Postmortem examinations performed on all IVR groups included vaginal irritation, macroscopic, and microscopic evaluations, including irritation scoring and histopathology. Intravaginal rings were retained over 28 days in all animals. Clinical observations showed no significant abnormal findings in any group. Pharmacokinetic analysis in animals showed sustained release of P over from days 0 through 14 of ring use. Irritation scores and microscopic assessments were consistent with the IVRs being well tolerated. These results will guide future human clinical studies to ultimately develop an IVR for use in women for the prevention of preterm birth.

Controlled-Release from High-Loaded Reservoir-Type Systems-A Case Study of Ethylene-Vinyl Acetate and Progesterone

Reservoir systems (drug-loaded core surrounded by drug-free membrane) provide long-term controlled drug release. This is especially beneficial for drug delivery to specific body regions including the vagina. In this study, we investigated the potential of reservoir systems to provide high drug release rates over several weeks. The considered model system was an intra-vaginal ring (IVR) delivering progesterone (P4) in the mg/day range using ethylene-vinyl acetate (EVA) as release rate-controlling polymers. To circumvent the high material needs associated with IVR manufacturing, we implemented a small-scale screening procedure that predicts the drug release from IVRs. Formulations were designed based on the solubility and diffusivity of P4 in EVAs with varying vinyl acetate content. High in-vitro P4 release was achieved by i) high P4 solubility in the core polymer; ii) high P4 partition coefficient between the membrane and the core; and/or iii) low membrane thicknesses. It was challenging for systems designed to release comparatively high fractions of P4 at early times to retain a constant drug release over a long time. P4 crystal dissolution in the core could not counterbalance drug diffusion through the membrane and drug crystal dissolution was found to be the rate-limiting step. Overall, high P4 release rates can be achieved from EVA-based reservoir systems.

In vitro release testing methods for drug-releasing vaginal rings

Drug-releasing vaginal rings are torus-shaped devices, generally fabricated from thermoplastic polymers or silicone elastomers, used to administer pharmaceutical drugs to the human vagina for periods typically ranging from three weeks to twelve months. One of the most important product performance tests for vaginal rings is the in vitro release test. Although it has been fifty years since a vaginal ring device was first described in the scientific literature, and despite seven drug-releasing vaginal rings having been approved for market, there is no universally accepted method for testing in vitro drug release, and only one non-compendial shaking incubator method (for the estradiol-releasing ring Estring®) is described in the US Food and Drug Administration's Dissolution Methods Database. Here, for the first time, we critically review the diverse range of test methods that have been described in the scientific literature for testing in vitro release of drug-releasing vaginal rings. Issues around in vitro-in vivo correlation and modelling of in vitro release data are also discussed.

Mathematical modeling of drug delivery from torus-shaped single-layer devices

A mathematical modeling of controlled release of drug from torus-shaped single-layer devices is presented. Analytical solutions based on the pseudo-steady state approximation are derived. The reliability and usefulness of the model are ascertained by comparison of the simulation results with matrix-type vaginal ring experimental release data reported in the literature. A good agreement between the model prediction and the experimental data is observed. An analysis of the effect of the variation in torus design parameters on the solute release is also presented. The model is applicable only to torus-shaped single-layer systems wherein the initial load of drug is higher than its solubility in the polymer.

Initial and steady-state pharmacokinetics of a vaginally administered formulation of progesterone

OBJECTIVE

The pharmacokinetics of a 100 mg vaginal progesterone suppository was evaluated on days 1 and 7 and a 200 mg suppository on day 14. All the volunteers were given oral 17 beta-estradiol during the study.

STUDY DESIGN

Ten postmenopausal women volunteered for this study. Progesterone was given as a vaginal suppository. Peripheral venous samples were obtained at appropriate intervals and analyzed for 17 beta-estradiol and progesterone levels. Area under the curve for progesterone was assessed by the trapezoidal method. Statistical analysis was performed by a one-way analysis of variance.

RESULTS

Serum 17 beta-estradiol levels ranged from 22 to 182 pg/ml. Maximal serum progesterone levels ranged from 5.7 to 20.9 ng/ml, with the mean maximal levels 13.97, 16.09, and 12.68 ng/ml (not significantly different) and a mean area under the curve of 168.13, 207.64 and 227.71 ng/ml per hour on days 1, 7, and 14 (not statistically different).

CONCLUSIONS

These data indicate that vaginal absorption of progesterone is efficient. The lack of difference in the area under the curve for both doses suggests that the vaginal mucosa or the total surface area of the vagina may limit the absorption of progesterone from the vagina.

The effect of small doses of progesterone released from two types of vaginal rings on ovarian activity and bleeding patterns during the first postpartum year

A total of 20 breastfeeding women used progesterone-releasing vaginal rings for up to 12 months. The women were divided into two groups, one (n = 9) using rings with an initial release rate of 5 mg/24 h, the other (n = 11) with a release rate of 20 mg/24 h. Individual women started to give breast milk supplements and ceased to breastfeed after various periods of time. Urinary estrone and pregnanediol glucuronide levels were measured by radioimmunoassay three times weekly during the entire trial. Individual diary cards were used to register bleeding and spotting. A significantly higher concentration of pregnanediol glucuronide was seen when the 20 mg/24 h ring was used in the lactation period, in comparison with the 5 mg/24 h ring. In the post-lactation period, pregnanediol glucuronide levels dropped when the 20 mg/24 h ring was used. Estrone glucuronide levels increased after the termination of breastfeeding, indicating an enhanced suppression of ovarian activity in the lactation period with both rings. Although the degree of suppression was dose-related, both rings were likely to offer a sufficient contraceptive effect in the lactation period. No significant changes were observed when milk supplements were added to breastfeeding. The use of the 20 mg/24 h ring resulted in a much better bleeding pattern (significantly less bleeding days) than the 5 mg/24 h ring during the lactation period. In the post-lactation period, the 20 mg/24 h ring the bleeding because much worse than in the lactation period.(ABSTRACT TRUNCATED AT 250 WORDS)

Progesterone-releasing vaginal rings for use in postpartum contraception. II. Pharmacokinetic profiles in women

Vaginal rings releasing progesterone with 3 different initial release rates (5, 8 and 20 mg/day) were used by 11, 10 and 10 women, respectively. The period of insertion was 90 days. The 5 and 8 mg/day rings consisted of a core loaded with progesterone, the 20 mg/day ring contained progesterone homogeneously distributed throughout the mass of the ring. Notwithstanding these differences, the total progesterone levels (areas under curve) were directly related to the release rates. So were the rates of decrease of progesterone levels during the 90 days of insertion of the ring. They were 25, 31 and 47% for the rings releasing 5, 8 and 20 mg/day, respectively.