The relationship between activity and the axial g = 2.06 EPR signal induced by CO in the periplasmic (Fe) hydrogenase from Desulfovibrio vulgaris

Stability of the H-cluster under whole-cell conditions-formation of an Htrans-like state and its reactivity towards oxygen

Hydrogenases are metalloenzymes that catalyze the reversible oxidation of molecular hydrogen into protons and electrons. For this purpose, [FeFe]-hydrogenases utilize a hexanuclear iron cofactor, the H-cluster. This biologically unique cofactor provides the enzyme with outstanding catalytic activities, but it is also highly oxygen sensitive. Under in vitro conditions, oxygen stable forms of the H-cluster denoted H_trans and H_inact can be generated via treatment with sulfide under oxidizing conditions. Herein, we show that an H_trans-like species forms spontaneously under intracellular conditions on a time scale of hours, concurrent with the cells ceasing H₂ production. Addition of cysteine or sulfide during the maturation promotes the formation of this H-cluster state. Moreover, it is found that formation of the observed H_trans-like species is influenced by both steric factors and proton transfer, underscoring the importance of outer coordination sphere effects on H-cluster reactivity.

Carbon Monoxide and Cyanide Ligands in the Active Site of [FeFe]-Hydrogenases

The [FeFe]-hydrogenases, although share common features when compared to other metal containing hydrogenases, clearly have independent evolutionary origins. Examples of [FeFe]-hydrogenases have been characterized in detail by biochemical and spectroscopic approaches and the high resolution structures of two examples have been determined. The active site H-cluster is a complex bridged metal assembly in which a [4Fe-4S] cubane is bridged to a 2Fe subcluster with unique non-protein ligands including carbon monoxide, cyanide, and a five carbon dithiolate. Carbon monoxide and cyanide ligands as a component of a native active metal center is a property unique to the metal containing hydrogenases and there has been considerable attention to the characterization of the H-cluster at the level of electronic structure and mechanism as well as to defining the biological means to synthesize such a unique metal cluster. The chapter describes the structural architecture of [FeFe]-hydrogenases and key spectroscopic observations that have afforded the field with a fundamental basis for understanding the relationship between structure and reactivity of the H-cluster. In addition, the results and ideas concerning the topic of H-cluster biosynthesis as an emerging and fascinating area of research, effectively reinforcing the potential linkage between iron-sulfur biochemistry to the role of iron-sulfur minerals in prebiotic chemistry and the origin of life.

Electrochemical Investigations of the Interconversions between Catalytic and Inhibited States of the [FeFe]-Hydrogenase from Desulfovibrio desulfuricans

Studies of the catalytic properties of the [FeFe]-hydrogenase from Desulfovibrio desulfuricans by protein film voltammetry, under a H2 atmosphere, reveal and establish a variety of interesting properties not observed or measured quantitatively with other techniques. The catalytic bias (inherent ability to oxidize hydrogen vs reduce protons) is quantified over a wide pH range: the enzyme is proficient at both H2 oxidation (from pH > 6) and H2 production (pH < 6). Hydrogen production is inhibited by H2, but the effect is much smaller than observed for [NiFe]-hydrogenases from Allochromatium vinosum or Desulfovibrio fructosovorans. Under anaerobic conditions and positive potentials, the [FeFe]-hydrogenase is oxidized to an inactive form, inert toward reaction with CO and O2, that rapidly reactivates upon one-electron reduction under 1 bar of H2. The potential dependence of this interconversion shows that the oxidized inactive form exists in two pH-interconvertible states with pK(ox) = 5.9. Studies of the CO-inhibited enzyme under H2 reveals a strong enhancement of the rate of activation by white light at -109 mV (monitoring H2 oxidation) that is absent at low potential (-540 mV, monitoring H+ reduction), thus demonstrating photolability that is dependent upon the oxidation state.

Electrochemical definitions of O2 sensitivity and oxidative inactivation in hydrogenases

A new strategy is described for comparing, quantitatively, the ability of hydrogenases to tolerate exposure to O2 and anoxic oxidizing conditions. Using protein film voltammetry, the inherent sensitivities to these challenges (thermodynamic potentials and rates of reactions) have been measured for enzymes from a range of mesophilic microorganisms. In the absence of O2, all the hydrogenases undergo reversible inactivation at various potentials above that of the H+/H2 redox couple, and H2 oxidation activities are thus limited to characteristic "potential windows". Reactions with O2 vary greatly; the [FeFe]-hydrogenase from Desulfovibrio desulfuricans ATCC 7757, an anaerobe, is irreversibly damaged by O2, surviving only if exposed to O2 in the anaerobically oxidized state (which therefore affords protection). In contrast, the membrane-bound [NiFe]-hydrogenase from the aerobe, Ralstonia eutropha, reacts reversibly with O2 even during turnover and continues to catalyze H2 oxidation in the presence of O2.

Mössbauer characterization of the iron-sulfur clusters in Desulfovibrio vulgaris hydrogenase

The periplasmic hydrogenase of Desulfovibrio vulgaris (Hildenbourough) is an all Fe-containing hydrogenase. It contains two ferredoxin type [4Fe-4S] clusters, termed the F clusters, and a catalytic H cluster. Recent X-ray crystallographic studies on two Fe hydrogenases revealed that the H cluster is composed of two sub-clusters, a [4Fe-4S] cluster ([4Fe-4S](H)) and a binuclear Fe cluster ([2Fe](H)), bridged by a cysteine sulfur. The aerobically purified D. vulgaris hydrogenase is stable in air. It is inactive and requires reductive activation. Upon reduction, the enzyme becomes sensitive to O(2), indicating that the reductive activation process is irreversible. Previous EPR investigations showed that upon reoxidation (under argon) the H cluster exhibits a rhombic EPR signal that is not seen in the as-purified enzyme, suggesting a conformational change in association with the reductive activation. For the purpose of gaining more information on the electronic properties of this unique H cluster and to understand further the reductive activation process, variable-temperature and variable-field Mössbauer spectroscopy has been used to characterize the Fe-S clusters in D. vulgaris hydrogenase poised at different redox states generated during a reductive titration, and in the CO-reacted enzyme. The data were successfully decomposed into spectral components corresponding to the F and H clusters, and characteristic parameters describing the electronic and magnetic properties of the F and H clusters were obtained. Consistent with the X-ray crystallographic results, the spectra of the H cluster can be understood as originating from an exchange coupled [4Fe-4S]-[2Fe] system. In particular, detailed analysis of the data reveals that the reductive activation begins with reduction of the [4Fe-4S](H) cluster from the 2+ to the 1+ state, followed by transfer of the reducing equivalent from the [4Fe-4S](H) subcluster to the binuclear [2Fe](H) subcluster. The results also reveal that binding of exogenous CO to the H cluster affects significantly the exchange coupling between the [4Fe-4S](H) and the [2Fe](H) subclusters. Implication of such a CO binding effect is discussed.

Desulfovibrio desulfuricans iron hydrogenase: the structure shows unusual coordination to an active site Fe binuclear center

BACKGROUND

Many microorganisms have the ability to either oxidize molecular hydrogen to generate reducing power or to produce hydrogen in order to remove low-potential electrons. These reactions are catalyzed by two unrelated enzymes: the Ni-Fe hydrogenases and the Fe-only hydrogenases.

RESULTS

We report here the structure of the heterodimeric Fe-only hydrogenase from Desulfovibrio desulfuricans - the first for this class of enzymes. With the exception of a ferredoxin-like domain, the structure represents a novel protein fold. The so-called H cluster of the enzyme is composed of a typical [4Fe-4S] cubane bridged to a binuclear active site Fe center containing putative CO and CN ligands and one bridging 1, 3-propanedithiol molecule. The conformation of the subunits can be explained by the evolutionary changes that have transformed monomeric cytoplasmic enzymes into dimeric periplasmic enzymes. Plausible electron- and proton-transfer pathways and a putative channel for the access of hydrogen to the active site have been identified.

CONCLUSIONS

The unrelated active sites of Ni-Fe and Fe-only hydrogenases have several common features: coordination of diatomic ligands to an Fe ion; a vacant coordination site on one of the metal ions representing a possible substrate-binding site; a thiolate-bridged binuclear center; and plausible proton- and electron-transfer pathways and substrate channels. The diatomic coordination to Fe ions makes them low spin and favors low redox states, which may be required for catalysis. Complex electron paramagnetic resonance signals typical of Fe-only hydrogenases arise from magnetic interactions between the [4Fe-4S] cluster and the active site binuclear center. The paucity of protein ligands to this center suggests that it was imported from the inorganic world as an already functional unit.

Further characterization of the [Fe]-hydrogenase from Desulfovibrio desulfuricans ATCC 7757

The properties of the periplasmic hydrogenase from Desulfovibrio desulfuricans ATCC 7757, previously reported to be a single-subunit protein [Glick, B. R., Martin, W. G., and Martin, S. M. (1980) Can. J. Microbiol. 26, 1214-1223] were reinvestigated. The pure enzyme exhibited a molecular mass of 53.5 kDa as measured by analytical ultracentrifugation and was found to comprise two different subunits of 42.5 kDa and 11 kDa, with serine and alanine as N-terminal residues, respectively. The N-terminal amino acid sequences of its large and small subunits, determined up to 25 residues, were identical to those of the Desulfovibrio vulgaris Hildenborough [Fe]-hydrogenase. D. desulfuricans ATCC 7757 hydrogenase was free of nickel and contained 14.0 atoms of iron and 14.4 atoms of acid-labile sulfur/molecule and had E400, 52.5 mM-1.cm-1. The purified hydrogenase showed a specific activity of 62 kU/mg of protein in the H2-uptake assay, and the H2-uptake activity was higher than H2-evolution activity. The enzyme isolated under aerobic conditions required incubation under reducing conditions to express its maximum activity both in the H2-uptake and 2H2/1H2 exchange reaction. The ratio of the activity of activated to as-isolated hydrogenase was approximately 3. EPR studies allowed the identification of two ferredoxin-type [4Fe-4S]1+ clusters in hydrogenase samples reduced by hydrogen. In addition, an atypical cluster exhibiting a rhombic signal (g values 2.10, 2.038, 1.994) assigned to the H2-activating site in other [Fe]-hydrogenases was detected in partially reduced samples. Molecular properties, EPR spectroscopy, catalytic activities with different substrates and sensitivity to hydrogenase inhibitors indicated that D. desulfuricans ATCC 7757 periplasmic hydrogenase is a [Fe]-hydrogenase, similar in most respects to the well characterized [Fe]-hydrogenase from D. vulgaris Hildenborough.

Redox properties of the iron-sulfur clusters in activated Fe-hydrogenase from Desulfovibrio vulgaris (Hildenborough)

The periplasmic Fe-hydrogenase from Desulfovibrio vulgaris (Hildenborough) contains three iron-sulfur prosthetic groups: two putative electron transferring [4Fe-4S] ferredoxin-like cubanes (two F-clusters), and one putative Fe/S supercluster redox catalyst (one H-cluster). Combined elemental analysis by proton-induced X-ray emission, inductively coupled plasma mass spectrometry, instrumental neutron activation analysis, atomic absorption spectroscopy and colorimetry establishes that elements with Z > 21 (except for 12-15 Fe) are present in 0.001-0.1 mol/mol quantities, not correlating with activity. Isoelectric focussing reveals the existence of multiple charge conformers with pI in the range 5.7-6.4. Repeated re-chromatography results in small amounts of enzyme of very high H2-production activity determined under standardized conditions (approximately 7000 U/mg). The enzyme exists in two different catalytic forms: as isolated the protein is 'resting' and O2-insensitive; upon reduction the protein becomes active and O2-sensitive. EPR-monitored redox titrations have been carried out of both the resting and the activated enzyme. In the course of a reductive titration, the resting protein becomes activated and begins to produce molecular hydrogen at the expense of reduced titrant. Therefore, equilibrium potentials are undefined, and previously reported apparent Em and n values [Patil, D. S., Moura, J. J. G., He, S. H., Teixeira, M, Prickril, B. C., DerVartanian, D. V., Peck, H. D. Jr, LeGall, J. & Huynh, B.-H. (1988) J. Biol. Chem. 263, 18,732-18,738] are not thermodynamic quantities. In the activated enzyme an S = 1/2 signal (g = 2.11, 2.05, 2.00; 0.4 spin/protein molecule), attributed to the oxidized H cluster, exhibits a single reduction potential, Em,7 = -307 mV, just above the onset potential of H2 production. The midpoint potential of the two F clusters (2.0 spins/protein molecule) has been determined either by titrating active enzyme with the H2/H+ couple (E,m = -330 mV) or by dithionite-titrating a recombinant protein that lacks the H-cluster active site (Em,7.5 = -340 mV). There is no significant redox interaction between the two F clusters (n approximately 1).

The structure and mechanism of iron-hydrogenases

Hydrogenases devoid of nickel and containing only Fe-S clusters have been found so far only in some strictly anaerobic bacteria. Four Fe-hydrogenases have been characterized: from Megasphaera elsdenii, Desulfovibrio vulgaris (strain Hildenborough), and two from Clostridium pasteurianum. All contain two or more [4Fe-4S]1+,2+ or F clusters and a unique type of Fe-S center termed the H cluster. The H cluster appears to be remarkably similar in all the hydrogenases, and is proposed as the site of H2 oxidation and H2 production. The F clusters serve to transfer electrons between the H cluster and the external electron carrier. In all of the hydrogenases the H cluster is comprised of at least three Fe atoms, and possibly six. In the oxidized state it contains two types of magnetically distinct Fe atoms, has an S = 1/2 spin state, and exhibits a novel rhombic EPR signal. The reduced cluster is diamagnetic (S = 0). The oxidized H cluster appears to undergo a conformation change upon reduction with H2 with an increase in Fe-Fe distances of about 0.5 A. Studies using resonance Raman, magnetic circular dichroism and electron spin echo spectroscopies suggest that the H cluster has significant non-sulfur coordination. The H cluster has two binding sites for CO, at least one of which can also bind O2. Binding to one site changes the EPR properties of the cluster and gives a photosensitive adduct, but does not affect catalytic activity. Binding to the other site, which only becomes exposed during the catalytic cycle, leads to loss of catalytic activity. Mechanisms of H2 activation and electron transfer are proposed to explain the effects of CO binding and the ability of one of the hydrogenases to preferentially catalyze H2 oxidation.