Tight ATP and ADP binding in the noncatalytic sites of Escherichia coli F1-ATPase is not affected by mutation of bulky residues in the 'glycine-rich loop'

A comparison of the innate flexibilities of six chains in F1-ATPase with identical secondary and tertiary folds; 3 active enzymes and 3 structural proteins

The α and β subunits comprising the hexameric assembly of F1-ATPase share a high degree of structural identity, though low primary identity. Each subunit binds nucleotide in similar pockets, yet only β subunits are catalytically active. Why? We re-examine their internal symmetry axes and observe interesting differences. Dividing each chain into an N-terminal head region, a C-terminal foot region, and a central torso, we observe (1) that while the foot and head regions in all chains obtain high and similar mobility, the torsos obtain different mobility profiles, with the β subunits exhibiting a higher motility compared to the α subunits, a trend supported by the crystallographic B-factors. The β subunits have greater torso mobility by having fewer distributed, nonlocal packing interactions providing a spacious and soft connectivity and offsetting the resultant softness with local stiffness elements, including an additional β sheet. (2) A loop near the nucleotide binding-domain of the β subunits, absent in the α subunits, swings to create a large variation in the occlusion of the nucleotide binding region. (3) A combination of the softest three eigenmodes significantly reduces the root mean square difference between the open and closed conformations of the β subunits. (4) Comparisons of computed and observed crystallographic B-factors suggest a suppression of a particular symmetry axis in an α subunit. (5) Unexpectedly, the soft intra-monomer oscillations pertain to distortions that do not create inter-monomer steric clashes in the assembly, suggesting that structural optimization of the assembly evolved at all levels of complexity.

Probes of inhibition of Escherichia coli F(1)-ATPase by 7-chloro-4-nitrobenz-2-oxa-1,3-diazole in the presence of MgADP and MgATP support a bi-site mechanism of ATP hydrolysis by the enzyme

Binding of MgADP and MgATP to Escherichia coli F(1)-ATPase (EcF(1)) has been assessed by their effects on extent of the enzyme inhibition by 7-chloro-4-nitrobenz-2-oxa-1,3-diazole (NBD-Cl). MgADP at low concentrations (K(d) 1.3 microM) promotes the inhibition, whereas at higher concentrations (K(d) 0.7 mM) EcF(1) is protected from inhibition. The mutant betaY331W-EcF(1) requires much higher MgADP, K(d) of about 10 mM, for protection. Such MgADP binding was not revealed by fluorescence quenching measurements. MgATP partially protects EcF(1) from inactivation by NBD-Cl, but the enzyme remains sensitive to NBD-Cl in the presence of MgATP at concentrations as high as 10 mM. The activating anion selenite in the absence of MgATP partially protects EcF(1) from inhibition by NBD-Cl. A complete protection of EcF(1) from inhibition by NBD-Cl has been observed in the presence of both MgATP and selenite. The results support a bi-site catalytic mechanism for MgATP hydrolysis by F(1)-ATPases and suggest that stimulation of the enzyme activity by activating anions is due to the anion binding to a catalytic site that remains unoccupied at saturating substrate concentration.

Nucleotide binding of an ADP analog to cooperating sites of chloroplast F1-ATPase (CF1)

Pre-steady state nucleotide binding to the chloroplast F1-ATPase (CF1) was measured in a stopped-flow apparatus by monitoring the change of fluorescence intensity of TNP-ADP upon binding. The analysis of the time courses led to the proposal of a mechanism of nucleotide binding with the following characteristics. (a) It involves three sites binding nucleotides in a concerted manner. (b) Each binding site is able to undergo a conformational change from a loose binding state into a state refraining from any direct release of the bound nucleotide into the medium. Only the reverse reaction via the loose binding state enables release out of the tight binding state. (c) Due to very strong negative cooperativity, a maximum of two of the three sites can be found in the state of tight binding. (d) Cooperativity between the three sites leads to a slower nucleotide binding of the second nucleotide compared to the first nucleotide. Furthermore, the conformational change from the loose binding state to the tight binding state is slowed down if one of the other sites already is in the tight binding state. Three-sites mechanisms in which rotation leads to an exchange of the properties of the binding sites failed to simulate the observed time courses of nucleotide binding. However, as the experimental set up was designed to prevent catalysis taking place, our results entirely agree with the current finding that rotation requires catalytic turnover of the enzyme.

Transcription termination factor Rho contains three noncatalytic nucleotide binding sites

The active form of transcription termination factor rho from Escherichia coli is a homohexamer, but several studies suggest that the six subunits of the hexamer are not functionally identical. Rho has three tight and three weak ATP binding sites. Based on our findings, we propose that the tight nucleotide binding sites are noncatalytic and the weak sites are catalytic. In the presence of RNA, the rho-catalyzed ATPase rate is fast, close to 30 s-1. However, under these conditions the three tightly bound nucleotides dissociate from the rho hexamer at a slow rate of 0.02 s-1, indicating that the three tight nucleotide binding sites of rho do not participate in the fast ATPase turnover. These slowly exchanging nucleotide binding sites of rho are capable of hydrolyzing ATP, but the resulting products (ADP and Pi) bind tightly and dissociate from rho about 1500 times slower than the fast ATPase turnover. Both RNA and excess ATP in solution are necessary for stabilizing nucleotide binding at these sites. In the absence of RNA, or when solution ATP is hydrolyzed to ADP, a faster dissociation of nucleotides was observed. Based on these results, we propose that the rho hexamer is similar to the F1-ATPase and T7 DNA helicase-containing noncatalytic sites that do not participate in the fast ATPase turnover. We propose that the three tight sites on rho are the noncatalytic sites and the three weak sites are the catalytic sites.

Catalytic mechanism of F1-ATPase

The structure of the core catalytic unit of ATP synthase, alpha 3 beta 3 gamma, has been determined by X-ray crystallography, revealing a roughly symmetrical arrangement of alternating alpha and beta subunits around a central cavity in which helical portions of gamma are found. A low-resolution structural model of F0, based on electron spectroscopic imaging, locates subunit a and the two copies of subunit b outside of a subunit c oligomer. The structures of individual subunits epsilon and c (largely) have been solved by NMR spectroscopy, but the oligomeric structure of c is still unknown. The structures of subunits a and delta remain undefined, that of b has not yet been defined but biochemical evidence indicates a credible model. Subunits gamma, epsilon, b, and delta are at the interface between F1 and F0; gamma epsilon complex forms one element of the stalk, interacting with c at the base and alpha and beta at the top. The locations of b and delta are less clear. Elucidation of the structure F0, of the stalk, and of the entire F1F0 remains a challenging goal.

Modification of domains of alpha and beta subunits of F1-ATPase from the thermophylic bacterium PS3, in their isolated and associated forms, by 3'-O-(4-benzoyl)benzoyl adenosine 5'-triphosphate (BzATP)

Photoaffinity labeling by 3'-O-(4-benzoyl)benzoyl adenosine 5'-triphosphate (BzATP) of the adenine nucleotide binding site(s) on isolated and complexed alpha and beta subunits of F1-ATPase from the thermophilic bacterium PS3 (TF1) is described. BzATP binds to both isolated alpha and beta subunits, to complexed beta subunit but not to complexed alpha subunit. Amino acid sequence determination of radiolabeled peptides obtained by proteolytic digestion of [gamma-32P]BzATP-labeled alpha subunit indicates that residues on both the amino-terminal (residues A41-E67) and carboxy-terminal (residues Q422-Q476) were modified by BzATP. One of the residues in the carboxy-terminal modified by BzATP is most probably alpha Q422. Although the binding stoichiometry of 1 mol of BzATP incorporated by either isolated or complexed beta subunit was maintained, the spatial conformation of the polypeptide determines which amino acid residue(s) is more accessible to the reactive radical. CNBr derived fragments beta G10-M64, beta E75-M233, and beta D390-M469 were labeled with the isolated beta subunit. With complexed beta subunit the label was found only in CNBr fragments: beta E75-M233 and beta G339-M389. The locations where the covalently bound BzATP was found, in the soluble and assembled subunits, indicate that different conformational states exist. In the isolated form of the alpha and beta subunits the amino- and carboxy-termini can fold and reach the central domain of the polypeptide, the domain containing the adenine nucleotide binding site. When alpha combines with beta to form the alpha 3 beta 3 core complex the new conformation of the subunits is such that covalent labeling by BzATP of alpha and of the amino terminal of beta subunit is excluded.

Location and properties of pyrophosphate-binding sites in Escherichia coli F1-ATPase

Binding of pyrophosphate (PPi) to the three catalytic ("C") and three noncatalytic ("NC") nucleotide sites of Escherichia coli F1-ATPase was determined by fluorescence spectroscopy using mutant enzymes with tryptophan inserted specifically in either C sites (beta Y331W) or NC sites (alpha R365W). Fluorescence of the tryptophan is quenched on binding of nucleotide; PPi binding parameters were determined by competition with ATP or adenyl-5'-yl imidodiphosphate. It was found that MgPPi binds to each NC site with Kd = 20 microM. In contrast, even at millimolar concentration, neither MgPPi nor free PPi showed significant binding to C sites. We confirmed that free PPi displaces nucleotide from C sites, but this was shown to be due to complexation of Mg2+ ions rather than to occupancy of the sites. MgPPi bound at NC sites was found not to affect ATP hydrolysis rates. From the data we propose a two-phase model for nucleotide binding at NC sites. In phase one, NC sites recognize the pyrophosphate "end" of the nucleotide, which binds initially with Kd similar to MgPPi; in phase two, a slow conformational change occurs which tightly sequesters adenine nucleotide. Phase two does not occur with guanine nucleotide. This model explains the preference of NC sites for adenine nucleotides. Pi (5 mM) did not bind to either C or NC sites.

Catalytic sites of Escherichia coli F1-ATPase

The catalytic site of Escherichia coli F1-ATPase is reviewed in terms of structure and function. Structural prediction, biochemical analyses, and mutagenesis experiments suggest that the catalytic site is formed primarily by residues 137-335 of beta-subunit. Subdomains of the site involved in phosphate-bond cleavage/synthesis and adenine-ring binding are discussed. Ambiguities inherent in steady-state catalytic measurements due to catalytic site cooperativity are discussed, and the advantages of pre-steady-state ("unisite") techniques are emphasized. The emergence of a single high-affinity catalytic site occurs as a result of F1-oligomer assembly. Measurements of unisite catalysis rate and equilibrium constants, and their modulation by varied pH, dimethylsulfoxide, and mutations, are described and conclusions regarding the nature of the high-affinity catalytic site and mechanism of catalysis are presented.

Catalytic properties of Escherichia coli F1-ATPase depleted of endogenous nucleotides

Nucleotide-depleted Escherichia coli F1 was prepared by the procedure of Wise et al. (1983, Biochem. J. 215, 343-350). This enzyme had high rates of steady-state ATPase and GTPase activity. When "unisite" ATP hydrolysis was measured using an F1/ATP concentration ratio of 10, all of the substoichiometric ATP became bound to the high-affinity catalytic site and none became bound to noncatalytic sites. The association rate constant for ATP binding was 7 x 10(5) M-1 s-1 and the KdATP was 7.9 x 10(-10) M, as compared to values of 3.8 x 10(5) M-1 s-1 and 1.9 x 10(-10) M, respectively, in native (i.e., nucleotide-replete) F1. Rate constants for bound ATP hydrolysis, ATP resynthesis, and P(i) release, and the reaction equilibrium constant, were similar in nucleotide-depleted and native F1. Therefore, we conclude that occupancy of the noncatalytic sites is not required for formation of the high-affinity catalytic site of F1 and has no significant effect on unisite catalysis. In further experiments we looked for the occurrence of inhibitory, catalytic-site-bound MgADP in E. coli F1. Such an entity has been reported for chloroplast and mitochondrial F1. However, our experiments gave no indication for inhibitory MgADP in E. coli F1.

The ATP synthase (F0-F1) complex in oxidative phosphorylation

The transmembrane electrochemical proton gradient generated by the redox systems of the respiratory chain in mitochondria and aerobic bacteria is utilized by proton translocating ATP synthases to catalyze the synthesis of ATP from ADP and P(i). The bacterial and mitochondrial H(+)-ATP synthases both consist of a membranous sector, F0, which forms a H(+)-channel, and an extramembranous sector, F1, which is responsible for catalysis. When detached from the membrane, the purified F1 sector functions mainly as an ATPase. In chloroplasts, the synthesis of ATP is also driven by a proton motive force, and the enzyme complex responsible for this synthesis is similar to the mitochondrial and bacterial ATP synthases. The synthesis of ATP by H(+)-ATP synthases proceeds without the formation of a phosphorylated enzyme intermediate, and involves co-operative interactions between the catalytic subunits.