A high throughput assay for inhibitors of HIV-1 protease. Screening of microbial metabolites

Sensing HIV Protease and Its Inhibitor Using "Helical Epitope"-Imprinted Polymers

A helical epitope-peptide (lle⁸⁵-Gly⁹⁴) was selected from the α-helix structure of the HIV protease (PR) as the template, which represents an intricate interplay between structure conformation and dimerization. The peptide template was mixed with water, trifluoroethanol (TFE), and acetonitrile (ACN) at a certain ratio to enlarge the helical conformation in the solution for the fabrication of helical epitope-mediated molecularly imprinted polymers (HEMIPs) on a quartz crystal microbalance (QCM) chip. The template molecules were then removed under equilibrium batch rebinding conditions involving 5% acetic acid/water. The resulting HEMIPs chip exhibited a high affinity toward template peptide HIV PR_85-94, His-tagged HIV PR, and HIV PR, with dissociation constants (K_d) as 160, 43.3, and 78.5 pM, respectively. The detection limit of the developed HIV PR_85-94 QCM sensor is 0.1 ng/mL. The HEMIPs chip exhibited a high affinity and selectivity to bind HIV PR and subsequently to an inhibitor of HIV PR (nelfinavir). The HIV PR binding site was properly oriented on the HEMIPs-chip to develop a HIV PR/HEMIPs chip, which can effectively bind nelfinavir to establish a sandwich assay. The nelfinavir then attached to the HIV PR/HEMIPs chip, which can be easily removed involving 0.8% acetic acid/water. Therefore, HIV PR/HEMIPs chip can be useful to screen for other HIV PR inhibitors. This technique may improve drug targeting for HIV therapy and also strengthen investigations into other virus assays.

Identification and biochemical characterization of small-molecule inhibitors of west nile virus serine protease by a high-throughput screen

West Nile virus and dengue virus are mosquito-borne flaviviruses that cause a large number of human infections each year. No vaccines or chemotherapeutics are currently available. These viruses encode a serine protease that is essential for polyprotein processing, a required step in the viral replication cycle. In this study, a high-throughput screening assay for the West Nile virus protease was employed to screen approximately 32,000 small-molecule compounds for identification of inhibitors. Lead inhibitor compounds with three distinct core chemical structures (1 to 3) were identified. In a secondary screening of selected compounds, two compounds, belonging to the 8-hydroxyquinoline family (compounds A and B) and containing core structure 1, were identified as potent inhibitors of the West Nile virus protease, with K(i) values of 3.2 +/- 0.3 microM and 3.4 +/- 0.6 microM, respectively. These compounds inhibited the dengue virus type 2 protease with K(i) values of 28.6 +/- 5.1 microM and 30.2 +/- 8.6 microM, respectively, showing some selectivity in the inhibition of these viral proteases. However, the compounds show no inhibition of cellular serine proteases, trypsin, or factor Xa. Kinetic analysis and molecular docking of compound B onto the known crystal structure of the West Nile virus protease indicate that the inhibitor binds in the substrate-binding cleft. Furthermore, compound B was capable of inhibiting West Nile virus RNA replication in cultured Vero cells (50% effective concentration, 1.4 +/- 0.4 microM; selectivity index, 100), presumably by inhibition of polyprotein processing.

A heterogeneous enzymatic assay for quantification of Plasmepsin II activity and the evaluation of its inhibitors

The emergence and worldwide spreading of Plasmodium falciparum strains that shown to be resistant to traditional drugs is considered a very serious health problem, given the high mortality and morbidity rate of Malaria. In the search for new drugs against this parasite, Hb hydrolyzing enzymes, such as Plasmepsin II (Plm II), have been classified as very promising targets for therapeutic attacks. In this work, it is developed a cheap and high-throughput heterogeneous enzymatic assay for measuring Plasmepsin II activity in order to use it as a tool in the discovery of new inhibitors of this enzyme. In this assay, Plasmepsin II acts upon a solid-phase bound synthetic peptide (DU2) whose sequence comprises the cleavage site F(33)-L(34) present in Hb alpha-chain. The peptide surface density is quantified by means of a classical ELISA-based procedure. In order to estimate the kinetic constants of the system and to quantify both, enzymatic and inhibitory activity, it was used a model for the kinetics of enzyme quasi-saturable systems previously developed by our group, that fitted very well to the experimental data. It was used Pepstatin as a model inhibitor of Plasmepsin II and the resulting dose-response relation agreed with the expected behavior for the Pepstatin-Plasmepsin II pair under the employed experimental conditions.

An immunoenzymatic solid-phase assay for quantitative determination of HIV-1 protease activity

A novel immunoenzymatic procedure for the quantitative determination of HIV protease activity is provided. An N-terminal biotinylated peptide (DU1) that comprises an HIV-1 protease (HIV-PR) cleavage sequence was bound to streptavidin-coated microtiter plates. The bound peptide can be quantified by an immunoenzymatic procedure (enzyme-linked immunosorbent assay, ELISA) that includes a monoclonal antibody (Mab 332) against the peptide (DU1) C-terminal. The incubation of the bound peptide with HIV-PR in solution resulted in a signal decrement, as the peptide was hydrolyzed and the released C-terminal segment washed away. An equation that relates the amount of added enzyme to the kinetics of the reaction was written in order to describe this heterogeneous enzyme-quasi-saturable system. This equation allows quantitative determination of protease activity, a feature widely underrated in previous similar assays. The assay also allows evaluation of the inhibitory activity of HIV-PR inhibitors. Due to the intrinsic advantages of the ELISA format, this method could be used in high-throughput screening of HIV protease inhibitors. The assay can be extended to other proteolytic enzymes.

Conformational selectivity of HIV-1 protease cleavage of X-Pro peptide bonds and its implications

Kinetic measurements on a fluorescent peptide analog of the p17/p24 cleavage site of the Gag polyprotein demonstrate the conformational selectivity of human immunodeficiency virus, type 1 protease for the trans conformation of the Tyr-Pro bond. A mean cis/trans ratio of 0. 3, and a cis --> trans isomerization rate constant of 0.022 s-1 are determined at T = 22 degrees C. This rate is in excellent agreement with that predicted by 19F NMR studies of structurally analogous peptides containing a fluorine/hydroxyl substitution on the tyrosyl residue. Addition of recombinant human cyclophilin resulted in a significant enhancement of this rate, and it is proposed that this enzyme, which has been shown to be associated with the Gag protein, functions as an auxiliary enzyme for the protease during cleavage in the virion.

Development and standardization of an immuno-quantified solid phase assay for HIV-1 aspartyl protease activity and its application to the evaluation of inhibitors

The catELISA technique was modified and standardized for measuring HIV-1 aspartyl protease activity and evaluating the potency of synthetic peptide inhibitors. This immuno-quantified solid phase assay combines the use of an immobilized C-terminal biotinylated peptide as substrate, a crude enzyme preparation, and a highly specific antiserum elicited against the C-terminal product of the enzyme reaction. A standard curve of this C-terminal product was constructed to determine the enzyme activity. This assay, which requires less enzyme and substrate, is more sensitive than the conventional HPLC method. The amounts of C-terminal peptide produced in solution as determined from ELISA and HPLC standard curves were comparable. Analogues of peptidomimetics designed in our laboratory were assayed for their potency to inhibit the enzyme. One of them, H4, which is a hydroxyethylamine isostere of the Phe-Pro peptide bond, was a powerful inhibitor.

Assay of HIV-1 protease activity by use of crude preparations of enzyme and biotinylated substrate

An enzyme immunoassay was developed for monitoring protease reactions of human immunodeficiency virus (HIV). The protease and its substrate, the gag precursor, were generated separately in Escherichia coli. The HIV-1 protease was generated with a glutathione-S-transferase expression system and the gag substrate, named Pin17/24, was prepared with a PinPoint expression system. Pin17/24 consists of an N-terminal peptide, which is biotinylated in E. coli, fused with a C-terminal peptide that contains a protease cleavage site flanked by p17 and p24 segments. Through its biotin in the N-terminal region, Pin17/24 bound to ELISA plates coated with avidin, whereas through its C-terminal region, the same molecule of Pin17/24 could be recognized by an anti-p24 monoclonal antibody. When the protease was added to Pin17/24, the p24 fragment was released from the biotinylated fusion protein and could no longer be retained on the avidin plates, and as a result, binding of the anti-p24 monoclonal antibody decreased. The binding was specific and the reaction was inhibited by a known HIV protease inhibitor. Due to the specific interactions between avidin and biotin, monoclonal antibody and antigen, and the HIV protease and the gag substrate, crude preparations of these reagents can be used readily in the assay. The simplicity and feasibility of this method should be useful for simultaneous monitoring of many enzyme reactions, particularly for screening possible HIV protease inhibitors.

Epitope mapping of a monoclonal antibody which binds HIV-1 Gag and not the Gag-derived proteins

Monoclonal antibody (MAb) 1G12 binds the uncleaved HIV-1 Gag polypeptide (p55), but fails to recognize the final products of the proteolytic processing [Sarubbi, E. et al. (1991) FEBS Lett. 279, 265-269]. In this report we show that binding of MAb 1G12 to a 110-residue Gag fragment containing the p17-p24 cleavage site prevents proteolysis of this site by the HIV-1 protease. Competition studies with synthetic peptides have been performed to map the binding site of MAb 1G12 on Gag. The antibody recognizes a sequential epitope that spans the HIV-1 protease cleavage site; determinants located on both p17 and p24 are required for antibody binding. MAb 1G12 is also shown to lack any cross-reactivity with other HIV-1 protease cleavage sites.

Peptide aldehydes as inhibitors of HIV protease

We have recently shown that alpha-MAPI, a peptidic aldehyde of microbial origin, inhibits the HIV protease with a potency comparable to pepstatin, having, differently from pepstatin, no activity on other aspartic proteases. In this study different peptide derivatives containing a C-terminal aldehyde have been tested to assess the potential of this function for the inhibition of HIV protease. The results of our analysis correspond with the recently published subsite preferences of the viral enzyme, indicating that aldehydes bind to the active site of the HIV protease. Our data suggest that peptide aldehydes can act in their hydrated forms as transition state analogues with the most potent inhibitor having an IC50 of 0.9 microM.

Structure-based strategies for drug design and discovery

Most drugs have been discovered in random screens or by exploiting information about macromolecular receptors. One source of this information is in the structures of critical proteins and nucleic acids. The structure-based approach to design couples this information with specialized computer programs to propose novel enzyme inhibitors and other therapeutic agents. Iterated design cycles have produced compounds now in clinical trials. The combination of molecular structure determination and computation is emerging as an important tool for drug development. These ideas will be applied to acquired immunodeficiency syndrome (AIDS) and bacterial drug resistance.

Reduced-bond tight-binding inhibitors of HIV-1 protease. Fine tuning of the enzyme subsite specificity

Truncation of a peptide substrate in the N-terminus and replacement of its scissile amide bond with a non-cleavable reduced bond results in a potent inhibitor of HIV-1 protease. A series of such inhibitors has been synthesized, and S2-S3' subsites of the protease binding cleft mapped. The S2 pocket requires bulky Boc or PIV groups, large aromatic Phe residues are preferred in P1 and P1' and Glu in P2'. The S3' pocket prefers Phe over small Ala or Val. Introduction of a Glu residue into the P2' position yields a tight-binding inhibitor of HIV-1 protease, Boc-Phe-[CH2-NH]-Phe-Glu-Phe-OMe, with a subnanomolar inhibition constant. The relevant peptide derived from the same amino acid sequence binds to the protease with a Ki of 110 nM, thus still demonstrating a good fit of the amino acid residues into the protease binding pockets and also the importance of the flexibility of P1-P1' linkage for proper binding. A new type of peptide bond mimetic, N-hydroxylamine -CH2-N(OH)-, has been synthesized. Binding of hydroxylamino inhibitor of HIV-1 protease is further improved with respect to reduced-bond inhibitor.

The HIV-1 protease as a therapeutic target for AIDS

HIV produces a small , dimeric aspartyl protease which specifically cleaves the polyprotein precursors encoding the structural proteins and enzymes of the virus. This proteolytic activity is absolutely required for the production of mature, infectious virions and is therefore an attractive target for therapeutic intervention. This review summarizes the strategies and multidisciplinary efforts that have been applied to date to the identification of specific inhibitors of this critical viral enzyme. These inhibitors include rationally designed peptide substrate analogs, compounds conceived from tertiary structure information on the enzyme and natural products. Future directions in the discovery and development of HIV-1 protease inhibitors are also discussed.