Thermostable peroxidase activity with a recombinant antibody L chain-porphyrin Fe(III) complex

Artificial Metalloenzymes: Reaction Scope and Optimization Strategies

The incorporation of a synthetic, catalytically competent metallocofactor into a protein scaffold to generate an artificial metalloenzyme (ArM) has been explored since the late 1970's. Progress in the ensuing years was limited by the tools available for both organometallic synthesis and protein engineering. Advances in both of these areas, combined with increased appreciation of the potential benefits of combining attractive features of both homogeneous catalysis and enzymatic catalysis, led to a resurgence of interest in ArMs starting in the early 2000's. Perhaps the most intriguing of potential ArM properties is their ability to endow homogeneous catalysts with a genetic memory. Indeed, incorporating a homogeneous catalyst into a genetically encoded scaffold offers the opportunity to improve ArM performance by directed evolution. This capability could, in turn, lead to improvements in ArM efficiency similar to those obtained for natural enzymes, providing systems suitable for practical applications and greater insight into the role of second coordination sphere interactions in organometallic catalysis. Since its renaissance in the early 2000's, different aspects of artificial metalloenzymes have been extensively reviewed and highlighted. Our intent is to provide a comprehensive overview of all work in the field up to December 2016, organized according to reaction class. Because of the wide range of non-natural reactions catalyzed by ArMs, this was done using a functional-group transformation classification. The review begins with a summary of the proteins and the anchoring strategies used to date for the creation of ArMs, followed by a historical perspective. Then follows a summary of the reactions catalyzed by ArMs and a concluding critical outlook. This analysis allows for comparison of similar reactions catalyzed by ArMs constructed using different metallocofactor anchoring strategies, cofactors, protein scaffolds, and mutagenesis strategies. These data will be used to construct a searchable Web site on ArMs that will be updated regularly by the authors.

A dual functional peptide carrying in vitro selected catalytic and binding activities

When minimal functional sequences are used, it is possible to integrate multiple functions on a single peptide chain, like a "single stroke drawing". Here a dual functional peptide was designed by combining in vitro selected catalytic and binding activities. For catalytic activity, we performed in vitro selection for a peptide aptamer binding to hemin by using ribosome display and isolated a peptide that had peroxidase activity in the presence of hemin. By combining the selected catalytic peptide with a peptide antigen, which can be recognized by an antibody, an enzyme-antibody conjugate-like peptide was obtained. This study demonstrates a successful strategy to create dual functionalized peptide chains for use in immunoassays.

Various strategies for obtaining oxidative artificial hemoproteins with a catalytic oxidative activity: from "Hemoabzymes" to "Hemozymes"?

The design of artificial hemoproteins that could lead to new biocatalysts for selective oxidation reactions using clean oxidants such as O 2 or H 2 O 2 under ecocompatible conditions constitutes a really promising challenge for a wide range of industrial applications. In vivo, such reactions are performed by heme-thiolate proteins, cytochromes P450, that catalyze the oxidation of drugs by dioxygen in the presence of electrons delivered from NADPH by cytochrome P450 reductase. Several strategies were used to design new artificial hemoproteins to mimic these enzymes, that associate synthetic metalloporphyrin derivatives to a protein that is supposed to induce a selectivity in the catalyzed reaction. A first generation of artificial hemoproteins or "hemoabzymes" was obtained by the non-covalent association of synthetic hemes such as N-methyl-mesoporphyrin IX, Fe(III) -α3β-tetra-o-carboxyphenylporphyrin or microperoxidase 8 with monoclonal antibodies raised against these cofactors. The obtained antibody-metalloporphyrin complexes displayed a peroxidase activity and some of them catalyzed the regio-selective nitration of phenols by H 2 O 2/ NO 2 and the stereo-selective oxidation of sulphides by H 2 O 2. A second generation of artificial hemoproteins or "hemozymes", was obtained by the non-covalent association of non-relevant proteins with metalloporphyrin derivatives. Several strategies were used, the most successful of which, named "host-guest" strategy involved the non-covalent incorporation of metalloporphyrin derivatives into easily affordable proteins. The artificial hemoproteins obtained were found to be able to perform efficiently the stereoselective oxidation of organic compounds such as sulphides and alkenes by H 2 O 2 and KHSO 5.

From “hemoabzymes” to “hemozymes”: towards new biocatalysts for selective oxidations

Two generations of artificial hemoproteins have been obtained: “hemoabzymes”, by non-covalent association of synthetic hemes with monoclonal antibodies raised against these cofactors and “hemozymes”, by non-covalent association of non-relevant proteins with metalloporphyrin derivatives. A review of the different strategies employed as well as their structural and catalytic properties is presented here.

Crystal structure of two anti-porphyrin antibodies with peroxidase activity

We report the crystal structures at 2.05 and 2.45 Å resolution of two antibodies, 13G10 and 14H7, directed against an iron(III)-αααβ-carboxyphenylporphyrin, which display some peroxidase activity. Although these two antibodies differ by only one amino acid in their variable λ-light chain and display 86% sequence identity in their variable heavy chain, their complementary determining regions (CDR) CDRH1 and CDRH3 adopt very different conformations. The presence of Met or Leu residues at positions preceding residue H101 in CDRH3 in 13G10 and 14H7, respectively, yields to shallow combining sites pockets with different shapes that are mainly hydrophobic. The hapten and other carboxyphenyl-derivatized iron(III)-porphyrins have been modeled in the active sites of both antibodies using protein ligand docking with the program GOLD. The hapten is maintained in the antibody pockets of 13G10 and 14H7 by a strong network of hydrogen bonds with two or three carboxylates of the carboxyphenyl substituents of the porphyrin, respectively, as well as numerous stacking and van der Waals interactions with the very hydrophobic CDRH3. However, no amino acid residue was found to chelate the iron. Modeling also allows us to rationalize the recognition of alternative porphyrinic cofactors by the 13G10 and 14H7 antibodies and the effect of imidazole binding on the peroxidase activity of the 13G10/porphyrin complexes.

Super catalytic antibody and antigenase

By immunizing ground-state peptides or proteins, we can produce super catalytic antibodies possessing serine protease-like characteristics. The unique feature of super catalytic antibodies is their ability to decompose a target molecule that is being killed. The authors have succeeded in preparing super catalytic antibodies that destroy (i) the HIV-1 envelope protein gp41, (ii) chemokine receptor CCR5 peptide, and (iii) Helicobacter pylori urease, etc. Some of them can degrade antigens at high catalytic reaction rates. Regarding their Km and kcat, super catalytic antibodies show intermediary values between that of enzymes (high Km and kcat) and that of antibodies (low Km and kcat [=0]). The catalytic function of an antibody mostly resides in its light chain. From mouse Vkappa germline analysis, it became clear that super catalytic antibodies are generated from some discrete germlines such as bb1, cr1, cs1, bl1, bj2 and bd2. In these Vkappa germlines, at least one catalytic triad composed of three amino acid residues, namely, Asp1, Ser27a and His93, is encoded. Namely, the antibody light chains (super catalytic antibodies) generated from the germlines are inherently able to enzymatically decompose antigens. Thus, such antibody light chains can be referred to as antigenase (antigen-decomposing enzyme) and may have arisen during the evolution of antibodies to acquire a higher ability than that of enzymes for developing a sophisticated self-defense system for survival.

Broadly distributed chemical reactivity of natural antibodies expressed in coordination with specific antigen binding activity

Antibody (Ab) nucleophilic reactivity was studied using hapten and polypeptide antigens containing biotinylated phosphonate diester groups (covalently reactive antigen analogs, CRAs). Polyclonal IgG from healthy donors formed covalent adducts with a positively charged hapten CRA at levels superior to trypsin. Each of the 16 single chain Fv clones studied expressed a similar reactivity, indicating the V domain location of the nucleophiles and their broad distribution in diverse Abs. The formation of hapten CRA-Fv adducts was correlated with Fv proteolytic activity determined by cleavage of a model peptide substrate. Despite excellent nucleophilicity, proteolysis by IgG proceeded at lower rates than trypsin, suggesting that events occurring after nucleophilic attack on the substrate limit the rate of Ab proteolysis. The extracellular domain of the epidermal growth factor receptor with phosphonate diester groups at Lys side chains and a synthetic peptide corresponding to residues 421- 431 of human immunodeficiency virus glycoprotein (gp) 120 with the phosphonate diester at the C terminus formed covalent adducts with specific polyclonal and monoclonal Abs raised by immunization with epidermal growth factor receptor and synthetic gp120-(421- 436) devoid of phosphonate diester groups, respectively. Adduct formation was inhibited by extracellular domain of the epidermal growth factor receptor (exEGFB) and synthetic gp120-(421- 436) devoid of phosphonate groups, suggesting that the nucleophiles are located within the antigen binding sites. These results suggest the innate character of the Ab nucleophilic reactivity, its functional coordination with non-covalent adaptive binding interactions developing over the course of B cell maturation, and novel routes toward permanent inhibition of Abs.

Hemoabzymes: towards new biocatalysts for selective oxidations

Catalytic antibodies with a metalloporphyrin cofactor or <<hemoabzymes>>, used as models for hemoproteins like peroxidases and cytochrome P450, represent a promising route to catalysts tailored for selective oxidation reactions. A brief overview of the literature shows that until now, the first strategy for obtaining such artificial hemoproteins has been to produce antiporphyrin antibodies, raised against various free-base, N-substituted Sn-, Pd- or Fe-porphyrins. Five of them exhibited, in the presence of the corresponding Fe-porphyrin cofactor, a significant peroxidase activity, with k(cat)/K(m) values of 3.7 x 10(3) - 2.9 x 10(5) M(-1) min(-1). This value remained, however, low when compared to that of peroxidases. This strategy has also led to a few models of cytochrome P450. The best of them, raised against a water-soluble tin(IV) porphyrin containing an axial alpha-naphtoxy ligand, was reported to catalyze the stereoselective oxidation of aromatic sulfides by iodosyl benzene using a Ru(II)-porphyrin cofactor. The relatively low efficiency of the porphyrin-antibody complexes is probably due, at least in part, to the fact that no proximal ligand of Fe has been induced in those antibodies. We then proposed to use, as a hapten, microperoxidase 8 (MP8), a heme octapeptide in which the imidazole side chain of histidine 18 acts as a proximal ligand of the iron atom. This led to the production of seven antibodies recognizing MP8, the best of them, 3A3, binding it with an apparent binding constant of 10(-7) M. The corresponding 3A3-MP8 complex was found to have a good peroxidase activity characterized by a k(cat)/K(m) value of 2 x 10(6) M(-1) min(-1), which constitutes the best one ever reported for an antibody-porphyrin complex. Active site topology studies suggest that the binding of MP8 occurs through interactions of its carboxylate substituents with amino acids of the antibody and that the protein brings a partial steric hindrance of the distal face of the heme of MP8. Consequently, the use of the 3A3-MP8 complexes for the selective oxidation of substrates, such as sulfides, alkanes and alkenes will be undertaken in the future.

Regioselective nitration of phenol induced by catalytic antibodies

Catalytic antibodies with a metalloporphyrin cofactor represent a new generation of biocatalysts tailored for selective oxidations. Thus monoclonal antibodies, 3A3, were raised against microperoxidase 8 (MP8), and the corresponding 3A3-MP8 complexes were shown previously to have a high peroxidase activity. This paper shows that those complexes also catalyzed efficiently the nitration of phenol into 2- and 4-nitrophenol by NO2- in the presence of H2O2. pH dependence studies suggested that no amino acid from the antibody protein participated in the heterolytic cleavage of the O-O bond of H2O2. The inhibition of the reaction by cyanide and radical scavengers suggested a MP8-mediated peroxidase-like mechanism, involving the reduction of high-valent iron-oxo species by NO2- and phenol producing, respectively, NO2* and phenoxy radicals, which then reacted to give nitrophenols. Finally, the antibody protein appears to have two major roles: (i) it protects MP8 toward oxidative degradations and (ii) it induces a regioselectivity of the reaction toward the formation of 2-nitrophenol.

Coordination chemistry of iron(III)-porphyrin-antibody complexes

An artificial peroxidase-like hemoprotein has been obtained by associating a monoclonal antibody, 13G10, and its iron(III)-alpha,alpha,alpha,beta-meso-tetrakis(ortho-carboxyphenyl)porphyrin [Fe(ToCPP)] hapten. In this antibody, about two-thirds of the porphyrin moiety is inserted in the binding site, its ortho-COOH substituents being recognized by amino-acids of the protein, and a carboxylic acid side chain of the protein acts as a general acid base catalyst in the heterolytic cleavage of the O-O bond of H2O2, but no amino-acid residue is acting as an axial ligand of the iron. We here show that the iron of 13G10-Fe(ToCPP) is able to bind, like that of free Fe(ToCPP), two small ligands such as CN-, but only one imidazole ligand, in contrast to to the iron(III) of Fe(ToCPP) that binds two. This phenomenon is general for a series of monosubstituted imidazoles, the 2- and 4-alkyl-substituted imidazoles being the best ligands, in agreement with the hydrophobic character of the antibody binding site. Complexes of antibody 13G10 with less hindered iron(III)-tetraarylporphyrins bearing only one [Fe(MoCPP)] or two meso-[ortho-carboxyphenyl] substituents [Fe(DoCPP)] also bind only one imidazole. Finally, peroxidase activity studies show that imidazole inhibits the peroxidase activity of 13G10-Fe(ToCPP) whereas it increases that of 13G10-Fe(DoCPP). This could be interpreted by the binding of the imidazole ligand on the iron atom which probably occurs in the case of 13G10-Fe(ToCPP) on the less hindered face of the porphyrin, close to the catalytic COOH residue, whereas in the case of 13G10-Fe(DoCPP) it can occur on the other face of the porphyrin. The 13G10-Fe(DoCPP)-imidazole complex thus constitutes a nice artificial peroxidase-like hemoprotein, with the axial imidazole ligand of the iron mimicking the proximal histidine of peroxidases and a COOH side chain of the antibody acting as a general acid-base catalyst like the distal histidine of peroxidases does.

Peroxidase activity of in vitro-selected 2'-amino RNAs

Peroxidase activities of RNAs containing 2'-amino groups, which were selected as aptamers binding to N-methylmesoporphyrin IX, were investigated. Some clones promoted the oxidation reaction of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) with hydrogen peroxide (H(2)O(2)) in the presence of iron(III)-protoporphyrin (hemin), whereas others did not. Each of them had a different substrate specificity. One of the active clones promoted the oxidation of o-dianisidine and beta-nicotinamide adenine dinucleotide reduced form (NADH) with H(2)O(2) 5 and 15 times faster than hemin only, respectively. On the other hand, one clone that was inactive on oxidation of ABTS exhibited the same level of activity on oxidation of o-dianisidine as that shown by the clone active on ABTS but no activity on NADH. By in vitro selection, we can produce various types of peroxidase-like non-natural RNAs.

Comparison of photovoltaic behaviors for horseradish peroxidase and its mimicry by surface photovoltage spectroscopy

Surface photovoltage spectroscopy (SPS) was chosen to study the photovoltaic behavior of horseradish peroxidase (HRP), hemin and immobilized hemin (poly(NIPAAm/MBA/hemin)). Different photovoltaic behaviors were observed in these three systems. In air, similar SPS curves were found for HRP and poly(NIPAAm/MBA/hemin) with different response intensities. However, poly(NIPAAm/MBA/hemin) showed a wider changing range upon increasing the positive and negative bias to 1.0 V. The SPS of hemin showed a total different behavior when an external positive potential was applied. In vacuum, clearly different photovoltaic behaviors were found. Moreover, the response value decreased when HRP was exposed to O2, the SPS intensity was different from that in air, and could be altered by changing the external biases. On the other hand, the SPS could not be changed before and after poly(NIPAAm/MBA/hemin) was exposed to O2. These differences may result from different chemical microenvironments for hemin in HRP versus that in poly(NIPAAm/MBA/hemin). It could be concluded that H2O and O2 were important factors affecting the photovoltage response in HRP, but only H2O played this important role in poly(NIPAAm/MBA/hemin).

In vitro selection of hematoporphyrin binding DNA aptamers

DNA aptamers that bind to hematoporphyrin IX (HPIX) were isolated using an in vitro selection technique. Most aptamers obtained after the 7th and 10th rounds contained guanine-rich sequences. Binding assay using fluorescence polarization technique and structural analysis by CD spectra revealed that the parallel guanine-quartet structure of the aptamer participates in the recognition of HPIX.

Proteolytic components of serum IgG preparations

Chemical catalysis, an effector mechanism utilized by fully assembled antibodies, can also be mediated by the isolated antibody subunits. Because trace amounts of free light chains (L chains) are present in IgG preparations, a detailed study was undertaken to identify the constituents responsible for the polyreactive proteolytic activity of IgG purified from human sera, determined as the extent of cleavage of the model peptide substrate Pro-Phe-Arg-methylcoumarinamide. Two proteolytic species with approximate mass of 50 kD and 150 kD were separated by repetitive gel filtration in a denaturing solvent (6 M guanidine hydrochloride). The activity of the renatured 50-kD fraction (in fluorescence units/microg protein) was more than 45-fold greater than of the 150-kD fraction. Both fractions lost the activity following immunoadsorption on immobilized anti-IgG antibody. Fab fragments prepared from the 150-kD IgG fraction retained the activity. Reducing and non-reducing SDS-electrophoresis suggested the 50-kD fraction isolated from the IgG preparations to be a mixture of heavy chain (H chain) monomers and disulphide bonded L chain dimers. Electrophoretically homogeneous monomers of 50-kD H chains and 25-kD L chains were prepared by gel filtration of reduced and alkylated IgG from seven human subjects. Each of the alkylated L chain preparations displayed the proteolytic activity. The activity in alkylated H chains was undetectable or only marginally greater than the background values. L chain dimers appear to be the major species responsible for the polyreactive proteolytic activity of serum IgG preparations, with a smaller contribution furnished by tetrameric IgG.

Kinetics of formation of antibody-ferric porphyrin complex with peroxidase activity

The antibody 2B4 combines with ferric mesoporphyrin to form an antibody-ferric mesoporphyrin complex which has a peroxidase activity. Formation of the complex was investigated by measuring the absorption in the Soret region after mixing the antibody and ferric mesoporphyrin. A rapid increase and a gradual decrease in the absorption were observed, and the respective first-order rate constants were obtained. From the dependence of values of the rate constants on the concentration of ferric mesoporphyrin, the complex formation was explained by a plausible mechanism, in which the antibody associated with ferric mesoporphyrin to form the first complex followed by a conformational change to the second complex. The first complex had almost the same peroxidase activity as that of the second complex. Our results suggests that the antibody acquires the peroxidase activity as soon as ferric mesoporphyrin is incorporated into its binding site, and that there will be no protein ligand to the iron center of ferric mesoporphyrin in the complex.

Studies of the reactivity of artificial peroxidase-like hemoproteins based on antibodies elicited against a specifically designed ortho-carboxy substituted tetraarylporphyrin

The temperature and pH dependence as well as the selectivity of the peroxidase activity of a complex associating a monoclonal antibody 13G10 with its iron(III)-alpha,alpha,alpha,beta-mesotetrakis(ortho-carboxyphenyl) porphyrin (Fe(ToCPP)) hapten have been studied and compared to those of Fe(ToCPP) alone. It first appears that the peroxidase activity of the 13G10-Fe(ToCPP) complex is remarkably thermostable and remains about 5 times higher than that of Fe(ToCPP) alone until at least 80 degrees C. Secondly, this complex is able to use not only H2O2 as oxidant but also a wide range of hydroperoxides such as alkyl, aralkyl and fatty acid hydroperoxides and catalyze their reduction 2-6-fold faster than Fe(ToCPP) alone. It is also able to catalyze the oxidation by H202 of a variety of reducing cosubstrates such as 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), o-phenylenediamine (OPD), 3,3',5,5'-tetramethylbenzidine (TMB) and 3,3'-dimethoxybenzidine 3-8-fold faster than Fe(ToCPP) alone, the bicyclic aromatic ABTS and TMB being the best reducing cosubstrates. Finally, a pH dependence study, between pH 4.6 and 7.5, of the oxidation of ABTS by H2O2 in the presence of either 13G10-Fe(ToCPP) or Fe(ToCPP) shows that Km(H2O2) values vary very similarly for both catalysts, whereas very different variations are found for the k(cat) values. With Fe(ToCPP) as catalyst the k(cat) value remains constant around 100 min(-1) whereas with the 13G10-Fe(ToCPP) complex, it increases sharply below pH 5 to reach 540 min -1 at pH 4.6. This could be due to the participation of a carboxylic acid side chain of the antibody protein, as a general acid-base catalyst, to the heterolytic cleavage of the O-O bond of H2O2 leading to the highly reactive iron(V)-oxo intermediate in the peroxidase mechanism. Accordingly, the modification of the carboxylic acid residues of antibody 13G10 by glycinamide leads to a 50% decrease of the peroxidase activity of the 13G10-Fe(ToCPP) complex.

Super catalytic antibody [I]: Decomposition of targeted protein by its antibody light chain

Obtaining an antibody capable of destroying a targeted protein is the eventual goal in developing superior catalytic antibody. We established a monoclonal antibody recognizing a highly conserved sequence, RGPDRPEGIEEEGGERDRD, of gp41 of the HIV-1 envelope. The obtained antibody reacted with gp41 and gp160 of HIV-1. The isolated and purified light chain not only decomposed the above antigenic peptide but also destroyed the gp41 molecule, indicating a novel ability. The decomposition of the antigen is presumably started by scission of the peptide bond between Arg-Gly in the above sequence. The light chain did not decompose BSA and HSA at all, showing the high specificity to antigens. The antibody light chain is referred to as a super catalytic antibody.

Mechanism and functional role of antibody catalysis

The light (L) chain of a model antibody (Ab) was deduced to contain a serine protease-like catalytic site capable of cleaving peptide bonds. The catalytic site is encoded by a germline VL gene. The catalytic activity can potentially be improved by somatic sequence diversification and pairing of the L chain with the appropriate heavy chain. Autoimmune disease is associated with increased synthesis of antigen (Ag)-specific Abs, but the reasons for this phenomenon are not known. Only recently has attention turned to the functional role of the catalytic function. Preliminary studies confirm that the catalytic cleavage of peptide bonds is a more potent means to achieve Ag neutralization, compared to reversible Ag binding. Administration of a monoclonal Ab to VIP in experimental animals induces an inflammatory response in the airways, suggesting that catalytic autoantibodies to this peptide found in airway disease and lupus are capable of causing airway dysfunction. The phenomenon of autoantibody catalysis can potentially be applied to isolate efficient catalysts directed against tumor or microbial Ags by exposing the autoimmune repertoire to such Ags or their analogs capable of recruiting the germline VL gene encoding the catalytic site.

Hemoabzymes. Different strategies for obtaining artificial hemoproteins based on antibodies

Besides existing models of chemical or biotechnological origin for hemoproteins like peroxidases and cytochromes P450, catalytic antibodies (Abs) with a metalloporphyrin cofactor represent a promising alternative route to catalysts tailored for selective oxidation reactions. A brief overview of the literature shows that, until now, the first strategy for obtaining such artificial hemoproteins has been to produce antiporphyrin Abs, raised against various free-base, N-substituted, Sn-, Pd-, or Fe-porphyrins. Four of them exhibited, in the presence of the corresponding Fe-porphyrin cofactor, a significant peroxidase activity, with kcat/K(m) values of 10(2) to 5 x 10(3)/M/s. This value remained low when compared to that of peroxidases, probably because neither a proximal ligand of the Fe, nor amino acid residues participating in the catalysis of the heterolytic cleavage of the O-O bond of H2O2, have been induced in those Abs. This strategy has been shown to be insufficient for the elaboration of effective models of cytochromes P450, because only one set of Abs, raised against meso-tetrakis(para-carboxyvinylphenyl)porphyrin, was reported to catalyze the nonstereoselective oxidation of styrene by iodosyl benzene using a Mn-porphyrin cofactor, and attempts to generate Abs having binding sites for both the substrate and the metalloporphyrin cofactor, using as a hapten a porphyrin covalently linked to the substrate, were not successful. A second strategy is then proposed, which involves the chemical labeling of antisubstrate Abs with a metalloporphyrin. As an example, preliminary results are presented on the covalent linkage of an Fe-porphyrin to an antiestradiol Ab, in order to obtain semisynthetic catalytic Abs able to catalyze the selective oxidation of steroids.

Structural characterization of mouse monoclonal antibody 13-1 against a porphyrin derivative: identification of a disulfide bond in CDR-H3 of Mab 13-1

The amino acid sequence of a mouse monoclonal antibody Mab13-1, a catalytic antibody against TCPP (meso-tetrakis(4-carboxyphenyl)porphyrin), was confirmed by mass spectrometric (MS) peptide mapping. The amino-terminal sequence of the heavy chain was established by MS/MS analysis of the isolated N-terminal peptide. The presence of a unique disulfide bond between Cys93H and Cys102H was identified by MS peptide mapping and sequence analysis of an S-S containing peptide. Positions of other disulfide bonds were identified to be conserved. The non-conserved disulfide bridge was found to be resistant as other intra-chain disulfide bonds against reduction under non-denaturing condition, and to be buried inside the molecule. This extra disulfide bond is expected to support antigen-binding by restricting the flexibility of CDR-H3 loop, and it might be favorable for the recognition of a plane antigen, a porphyrin derivative.

Studies of high thermostability and peroxidase activity of recombinant antibody L chain-porphyrin Fe(III) complex

A complex of an independent L chain from anti-mesotetrakis (4-carboxyphenyl) porphyrin (TCPP) monoclonal antibody 13-1 and TCPP Fe(III) was designated as L-zyme and shown to exhibit high peroxidase activity and high optimal reaction temperature (90 degrees C). Heat denaturation study and circular dichroism (CD) spectra analysis suggested that refolded structure of 13-1 L chain exhibited significantly reduced inactivation rate after heat treatment. The secondary structure of 13-1 L chain changed slightly by the encapsulation of TCPP Fe(III) and the complex was found to be less thermostable than the L chain alone. Furthermore, by characterization of truncated forms of the L chain, it was revealed that the hydrophobic region (115-146) and hydrophilic region (147-189) in CL are important for thermostability and activity, respectively. Tertiary structure of L-zyme was predicted by AbM. Comparison of residues of L-zyme with those in the active centre of known structure of the peroxidase from Arthromyces ramosus (ARP) indicated that His38(CDR1), His94(CDR3), Arg96(CDR3) of L-zyme are important residues for peroxidase activity. Moreover, the steric arrangements of these residues in both L-zyme and ARP are similar, respectively. Distance between proximal His and distal His in L-zyme is 9.09 A, whereas that of ARP is 7.8 A.

Artificial peroxidase-like hemoproteins based on antibodies constructed from a specifically designed ortho-carboxy substituted tetraarylporphyrin hapten and exhibiting a high affinity for iron-porphyrins

In order to get catalytic antibodies modelling peroxidases BALB/c mice have been immunized with iron(III)-alpha,alpha,alpha,beta-mesotetrakis-orthocarboxypheny l-porphyrin (Fe-(ToCPP))-KLH conjugates. Monoclonal antibodies have been produced by the hybridoma technology. Three antibodies, 2 IgG1 and 1 IgG2a, were found to bind both Fe(ToCPP) and the free base ToCPPH2 with similar binding constants. None of those antibodies was found to bind tetraphenylporphyrin. Those results suggest that the recognition of Fe(ToCPP) by the antibodies was mainly due to the binding of the carboxylate groups to some amino acid residues of the protein. True Kd values of 2.9 x 10(-9) M and 5.5 x 10(-9) M have been determined for the two IgG1-Fe(ToCPP) complexes. Those values are the best ones ever reported for iron-porphyrin-antibody complexes. UV-vis. studies have shown that the two IgG1-Fe(ToCPP) complexes were high-spin hexacoordinate iron(III) complexes, with no amino acid residue binding the iron, whereas the IgG2a-Fe(ToCPP) complex was a low-spin hexacoordinate iron(III) complex with two strong ligands binding the iron atom. Both IgG1-Fe(ToCPP) complexes were found to catalyze the oxidation of 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid (ABTS) 5-fold more efficiently than Fe(ToCPP) alone whereas the binding of IgG2a to this iron-porphyrin had no effect on its catalytic activity. kcat values of 100 min(-1) and 63 min(-1) and kcat/Km values of 105 M(-1) s(-1) and 119 M(-1) s(-1) have been found respectively for the two IgG1-Fe(ToCPP) complexes.