Gas Chromatograph-mass spectrometer combinations and their applications

Method to predict gas chromatographic response factors for the trace-level analysis of volatile organic compounds based on the effective carbon number concept

A procedure has been developed to estimate GC-MS response factors based on the theory of effective carbon number defined as the sum of the carbon number and carbon number equivalent for each selected molecular descriptor (multiplied by its number of occurrences) in each compound's molecular structure. As a means to validate the effective carbon number procedure for GC-MS analysis, a test suite of 19 volatile organic compounds was analyzed by the sorbent-tube thermal desorption method. In the effective carbon number procedure, the carbon number equivalent for each descriptor was determined to yield the optimal linear plots between response factor versus the effective carbon number with the maximum R(2) (>0.975) and the minimum mean absolute error (<5%). Effective carbon number analysis is validated as a potent approach to estimate response factor values for most compounds amenable to the sorbent-tube thermal desorption GC-MS method. Overall, it is concluded that the application of response factor versus effective carbon number relationship can produce fairly reliable prediction with reduced errors relative to other comparable procedures such as the response factor versus the carbon number approach.

Definitions of terms relating to mass spectrometry (IUPAC Recommendations 2013)

This document contains recommendations for terminology in mass spectrometry. Development of standard terms dates back to 1974 when the IUPAC Commission on Analytical Nomenclature issued recommendations on mass spectrometry terms and definitions. In 1978, the IUPAC Commission on Molecular Structure and Spectroscopy updated and extended the recommendations and made further recommendations regarding symbols, acronyms, and abbreviations. The IUPAC Physical Chemistry Division Commission on Molecular Structure and Spectroscopy’s Subcommittee on Mass Spectroscopy revised the recommended terms in 1991 and appended terms relating to vacuum technology. Some additional terms related to tandem mass spectrometry were added in 1993 and accelerator mass spectrometry in 1994. Owing to the rapid expansion of the field in the intervening years, particularly in mass spectrometry of biomolecules, a further revision of the recommendations has become necessary. This document contains a comprehensive revision of mass spectrometry terminology that represents the current consensus of the mass spectrometry community.

Determination of molecular mass distribution of silicone oils by supercritical fluid chromatography, matrix-assisted laser desorption ionization time-of-flight mass spectrometry and their off-line combination

Silicone oil samples were characterized by supercritical fluid chromatography (SFC), matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI--TOF MS), and their off-line combination. SFC was used to separate samples of silicone oils on micropacked capillary columns. The fractions for the identification studies were obtained from SFC runs at defined time intervals, when the restrictor was pulled out from the chromatographic flame ionization detector (FID) and inserted into a glass vial with acetone. MALDI--TOF MS was used for the identification of individual oligomers in the fractions separated. The molecular mass distributions determined based on SFC and MALDI--TOF MS measurements were compared. From this comparison, it follows that the results are in good agreement. However, certain differences were observed: MALDI--TOF MS was capable of detecting somewhat larger oligomers than the SFC-FID, but the lower molecular mass oligomers were not present in the MALDI spectra. Differences in the region of lower molecular masses can be explained by evaporation of the more volatile low molecular mass oligomers resulting from heating of the sample during the MALDI--TOF MS measurements as a result of the absorption of the laser shot energy. The fact that no high mass discrimination effects of the MALDI--TOF MS measurements, compared with SFC, were observed is very promising for further applications of MALDI--TOF MS in characterizing synthetic polymers of moderate polydispersity.

The application of low voltge mass spectrometry to the determination of extent and location of deuterium substitution in dethiobiotin

The fragmentation mechanism of dethiobiotin and its derivatives has been studied. A new fragmentation favoured at low energy allows the localization of deuterium on the carbons 2, 3, 4 and 5 in a sample of monodeuterated dethiobiotin.

Integrated gas chromatography-mass spectrometry

Mass spectrometric analysis of organic compounds was in the early 1950s done mostly for quantitative determination of petroleum products. The use of the mass spectrometer for qualitative analysis of solid organic material samples was shown by O'Neil & Wier (1951) and since then a continuous increase in mass spectrometric studies of different classes of organic compounds has been noted. After the gas chromatograph was developed by James & Martin (1952) the quantitative analysis of complex mixtures of organic compounds was possible and after a few years the gas chromatographic method was considered as routine. The first connection of a gas chromatograph (GC) to a mass spectrometer (MS) was made by Holmes & Morell (1957). They studied gases using a splitter system where only a small part or less than 1% of the effluent from a packed column was transferred to the ion source of the mass spectrometer. The next step in GC—MS development was made by Gohlke (1959), who studied compounds of low molecular weight using capillary column directly connected to a time-of-flight mass spectrometer. This was possible due to the fact that the carrier gas flow rate could be limited to about 1 ml/min. To avoid the sample loss resulting from using a packed column with the splitter system a jet molecular separator was constructed as an interphase between the packed column and a mass spectrometer with magnetic sector analyser (Ryhage, 1964). Mixtures of fatty acids and of hydrocarbons with a molecular weight of up to about 420 were studied. In this study spectra were taken at irregular intervals.