Stationary phase effects in reversed-phase liquid chromatography

Analysis of human biological samples using porous graphitic carbon columns and liquid chromatography-mass spectrometry: a review

Liquid chromatography-mass spectrometry (LC-MS) has emerged as a powerful analytical technique for analyzing complex biological samples. Among various chromatographic stationary phases, porous graphitic carbon (PGC) columns have attracted significant attention due to their unique properties-such as the ability to separate both polar and non-polar compounds and their stability through all pH ranges and to high temperatures-besides the compatibility with LC-MS. This review discusses the applicability of PGC for SPE and separation in LC-MS-based analyses of human biological samples, highlighting the diverse applications of PGC-LC-MS in analyzing endogenous metabolites, pharmaceuticals, and biomarkers, such as glycans, proteins, oligosaccharides, sugar phosphates, and nucleotides. Additionally, the fundamental principles underlying PGC column chemistry and its advantages, challenges, and advances in method development are explored. This comprehensive review aims to provide researchers and practitioners with a valuable resource for understanding the capabilities and limitations of PGC columns in LC-MS-based analysis of human biological samples, thereby facilitating advancements in analytical methodologies and biomedical research.

Estimating Octanol-Water Partition Coefficients of Novel Brominated Flame Retardants by Reversed-Phase High-Performance Liquid Chromatography and Computational Models

Legacy brominated flame retardants, including polybrominated diphenyl ethers (PBDEs), have been classified as persistent organic pollutants and replaced with novel brominated flame retardants (NBFRs). The octanol-water partition coefficients (log KOW) of NBFRs have been computationally estimated, but the log KOW values provided by these methods can differ by 1 to 3 orders of magnitude. Given the importance of this parameter in fate and toxicity models, we indirectly measured the log KOW values of eight NBFRs by their capacity factor (k') on a reversed-phase high-performance liquid chromatography (HPLC) C18 column by isocratic elution and compared these measured values with those estimated by nine computational models. Log KOW values were obtained for the NBFRs 1,2-bis(2,4,6-tribromophenoxy) ethane, pentabromobenzene, pentabromoethylbenzene, pentabromotoluene, 2-ethylhexyl 2,3,4,5-tetrabromobenzoate, allyl 2,4,6-tribromophenylether, 2,3-dibromopropyl-2,4,6-tribromophenyl ether, and bis(2-ethylhexyl) tetrabromophthalate. A training set of phthalates, polychlorinated biphenyls, PBDEs, and halogenated benzenes were chosen to obtain the log k'-log KOW calibration for the NBFRs. The computational models KowWIN, XLogP3, EAS-E Suite, COSMOtherm, DirectML, and Abraham polyparameter linear free energy relationships all predicted the log KOW values of the calibration compounds to within 1 order of magnitude without significant bias. The median of these models predicted log KOW values for the calibration compounds that were close to those known in the literature with root mean square error (RMSE) = 0.224 and for the NBFRs that were close to those measured by HPLC (RMSE = 0.334). Environ Toxicol Chem 2024;43:2105-2114. © 2024 SETAC.

Uncovering the fragmentation and separation characteristics of sophorolipid biosurfactants with LC-MS-ESI

The application of liquid chromatography and mass spectrometry (MS) is a challenging area of research for structural identification of sophorolipids, owing to the large number of possible variations in structure and limited knowledge on the separation and fragmentation characteristics of the variants. The aims of this work was to provide a comprehensive analysis of the expected characteristics and fragmentation patterns of a wide range of sophorolipid biosurfactant congeners, providing a methodology and process alongside freely available data to inform and enable future research of commercial or novel sophorolipids. Samples of acidic and lactonic sophorolipid standards were tested using reverse-phase ultra-high performance liquid chromatography and identified using electrospray ionization MS. 37 sophorolipid variants were identified and compared for their elution order and fragmentation pattern under MS/MS. The retention time of sophorolipids was increased by the presence of lactonization, unsaturation, chain length, and acetylation as hydrophobic interactions with the C18 stationary phase increased. A key finding that acidic forms can elute later than lactonic variants was obtained when the fatty acid length and unsaturation and acetylation are altered, in contradiction to previous literature statements. Fragmentation pathways were determined for lactonic and acidic variants under negative [M-H]- and positive [M+NH4]+ ionization, and unique patterns/pathways were identified to help determine the structural components present. The first publicly available database of chromatograms and MS2 spectra has been made available to aid in the identification of sophorolipid components and provide a reliable dataset to accelerate future research into novel sophorolipids and shorten the time to innovation.

ONE-SENTENCE SUMMARY

This article describes the process and challenges in identifying different structures of eco-friendly biosurfactants, providing a novel database to compare results.

Montmorillonite-based polymethacrylate composite monoliths as stationary phase materials for food and pharmaceutical analysis in capillary liquid and gas chromatography

This work relates to the preparation of novel and promising stationary phases containing inorganic-organic composites for capillary liquid and gas chromatography. A naturally occurring montmorillonite was introduced to polymethacrylate monoliths, then used under different conditions of GC and HPLC at the same time. The performance of the columns was evaluated for the separation of alkane and alkylbenzene series in GC and capillary HPLC, respectively. While the bare monoliths failed to separate the model analytes, montmorillonite-based polymethacrylate allowed a full separation of the mixtures with R_s≥1.42. The columns were applied for the determination of myrcene and limonene isomers in the peel extracts of some fruits using GC, and for the analysis of active ingredients including aspirin, vitamin-C, caffeine, and ibuprofen extracted from common drugs using capillary HPLC. In GC, fast separation was achieved in 1.0 min with R_s of 6.53. The columns exhibited the best efficiency for myrcene with 20,900 plates/m. Using the capillary HPLC columns, the active ingredients were resolved in 10 min with R_s≥5.72. The efficiency values located between 12,800-21,700 plates/m in all cases. The developed methods were found to be linear in the range of 0.10-10.0 and 0.20-180 μg/mL for GC and HPLC, respectively. In comparison with commercial columns, the results in GC methods reveal that, despite their much shorter length, the prepared columns proved a faster separation with higher efficiency and comparable detection limits and chromatographic resolution. The prepared HPLC capillaries exposed lower run times and detection limits with comparable efficiency and resolution, and consume fewer samples and mobile phase solvents. The results demonstrate that the montmorillonite-based polymethacrylate composites are applicable as stationary phases for routine analysis and quality control of important fields such as food and pharmaceutical samples.

Effect of phenyl numbers in polyphenyl ligand on retention properties of aromatic stationary phases

Aromatic phase, as one type of reversed-phase stationary phases, shows complementary selectivity to the n-alkyl counterparts especially for certain challenging separation tasks. However, effect of phenyl numbers in aromatic ligands on retention behaviors has rarely been addressed compared with the alkyl stationary phases. To illustrate the issue, a series of polyphenyl stationary phases were facially prepared via the coupling chemistry of isocyanate with amine, including aniline (π¹), 4-aminobiphenyl (π²), 4-amino-p-terphenyl (π³) and [1,1':4',1'':4'',1'''-quaterphenyl]-4-amine (π⁴), respectively. The chromatographic behaviors of the new stationary phases as well as the traditional C18 were systematically compared in terms of retention mode, hydrophobic and aromatic selectivity, shape selectivity and π-π interaction by various analytes, including alkylbenzenes, polycyclic aromatic hydrocarbons congeners and substituted benzenes with electron-withdrawing groups. Due to the homologous structure of four polyphenyl ligands, the hydrophobic selectivity, aromatic selectivity and shape selectivity of stationary phases increase with phenyl numbers in the bonded polyphenyl ligands, whereas the increment becomes insignificant from U-π³ to U-π⁴. This phenomenon is explained by the insertion degree of analytes in the polyphenyl ligand brushes. Compared with the homemade C18, the polyphenyl phases indicate insignificant changes of shape selectivity with temperature. Notably, the new polyphenyl phases demonstrate the great selective separation towards the electron-deficient compounds through the π-π interaction. These findings make up for the understanding of the retention behavior of aromatic stationary phases.

Comparison of the Retention and Separation Selectivity of Aromatic Hydrocarbons with Polar Groups in RP-HPLC Systems with Different Stationary Phases and Eluents

In this manuscript, the retention of aromatic hydrocarbons with polar groups has been compared for systems with various nonpolar columns of the types from C3 to C18 and different mobile phases composed of methanol, acetonitrile, or tetrahydrofuran as modifiers. The selectivity separation of the solutes in systems with different adsorbents, when one eluent modifier is swapped by another, has been explained, taking into account molecular interactions of the solutes with components of the stationary phase region (i.e., extracted modifier depending on the chain length of the stationary phase).

Column Characterization and Selection Systems in Reversed-Phase High-Performance Liquid Chromatography

Reversed-phase high-performance liquid chromatography (RP-HPLC) is the most popular chromatographic mode, accounting for more than 90% of all separations. HPLC itself owes its immense popularity to it being relatively simple and inexpensive, with the equipment being reliable and easy to operate. Due to extensive automation, it can be run virtually unattended with multiple samples at various separation conditions, even by relatively low-skilled personnel. Currently, there are >600 RP-HPLC columns available to end users for purchase, some of which exhibit very large differences in selectivity and production quality. Often, two similar RP-HPLC columns are not equally suitable for the requisite separation, and to date, there is no universal RP-HPLC column covering a variety of analytes. This forces analytical laboratories to keep a multitude of diverse columns. Therefore, column selection is a crucial segment of RP-HPLC method development, especially since sample complexity is constantly increasing. Rationally choosing an appropriate column is complicated. In addition to the differences in the primary intermolecular interactions with analytes of the dispersive (London) type, individual columns can also exhibit a unique character owing to specific polar, hydrogen bond, and electron pair donor-acceptor interactions. They can also vary depending on the type of packing, amount and type of residual silanols, "end-capping", bonding density of ligands, and pore size, among others. Consequently, the chromatographic performance of RP-HPLC systems is often considerably altered depending on the selected column. Although a wide spectrum of knowledge is available on this important subject, there is still a lack of a comprehensive review for an objective comparison and/or selection of chromatographic columns. We aim for this review to be a comprehensive, authoritative, critical, and easily readable monograph of the most relevant publications regarding column selection and characterization in RP-HPLC covering the past four decades. Future perspectives, which involve the integration of state-of-the-art molecular simulations (molecular dynamics or Monte Carlo) with minimal experiments, aimed at nearly "experiment-free" column selection methodology, are proposed.

Novel ultra stable silica-based stationary phases for reversed phase liquid chromatography--study of a hydrophobically assisted weak acid cation exchange phase

A mixed-mode reversed-phase/weak cation exchange (RP/WCX) phase has been developed by introducing a small amount of carboxylate functionality into a hydrophobic hyper-crosslinked (HC) platform. This silica-based HC platform was designed to form an extensive polystyrene network completely confined to the particle's surface. The fully connected polymer network prevents the loss of bonded phase, which leads to superior hydrolytic stability of the new phase when compared to conventional silica-based phases. Compared to previously introduced HC phases the added carboxylic groups impart a new weak cation exchange selectivity to the base hydrophobic HC platform. The phase thus prepared shows a mixed-mode retention mechanism, allowing for both neutral organic compounds and bases of a wide polarity range to be simultaneously separated on the same phase under the same conditions. In addition, the new phase offers the flexibility that gradients in organic modifier, pH or ionic competitors can be used to affect the separation of a wide range of solutes. Moreover, the inherent weak acid cation exchange groups allow formic and acetic acid buffers to be used as eluents thereby avoiding the mass spectrometric ionization suppression problems concomitant to the use of non-volatile additives such as strong amine modifiers (e.g. triethylamine) or salts (e.g. NaCl) to elute basic solutes from the strong cation exchange phase which was previously developed in this lab. The use of the new phase for achieving strong retention of rather hydrophilic neurotransmitters and drugs of abuse without the need for ion pairing agents is demonstrated.

Stability indicating method for famotidine in pharmaceuticals using porous graphitic carbon column

A simple, sensitive and rapid HPLC method was developed and validated for the simultaneous determination of famotidine (FMT) and related impurities in pharmaceuticals. Chromatographic separation was accomplished within 10 min on a porous graphitic carbon (PGC) column using 50:50 v/v ACN-water containing 0.5% pentane sulphonic acid (PSA) as the mobile phase. Separation was achieved with a flow rate of 1 mL/min and a detection wavelength of 265 nm. The calibration curves were linear over a concentration range of 1.5-100 microg/mL. The intra- and interday RSDs (n = 5) for the retention times and peak area were all less than 2%. The method was sensitive with an LOD (S/N = 3) of 0.1 microg/mL for FMT, imp. C and 0.05 microg/mL for imp. 2, A and D. All recoveries were greater than 98%. The method was demonstrated to be precise, accurate and specific with no interference from the tablet ingredients and separation of the drug peak from the peaks of the degradation products (oxidative degradation and acid and base degradation). The results indicated that the proposed method could be used for the determination of FMT in commercial dosage forms and as a stability-indicating assay.

Can the theory of gradient liquid chromatography be useful in solving practical problems?

Advances in the theory of gradient liquid chromatography and their practical impacts are reviewed. Theoretical models describing retention in reversed-phase, normal-phase and ion-exchange modes are compared. Main attention is focused on practically useful models described by two- or three-parameter equations fitting the experimental data in the range of mobile phase composition utilized for sample migration during gradient elution. The applications of theory for gradient method development, optimization and transfer are addressed. The origins and possibilities for overcoming possible pitfalls are discussed, including the effects of the instrumental dwell volume, uptake of mobile phase components on the column and size of the sample molecules. Special attention is focused on gradient separations of large molecules.

Wheat digalactosyldiacylglycerol molecular species profiling using porous graphitic carbon stationary phase

The potential of porous graphitic carbon stationary phase (PGC) was assessed for the separation of molecular species of digalactosyldiacylglycerol (DGDG). Detection was by an evaporative light scattering detector (ELSD). A conventional optimization strategy allowed definition of a quaternary non-aqueous mobile phase and separation of 9 wheat DGDG molecular species with isocratic elution: methanol/toluene/tetrahydrofuran/chloroform 64.3/21.5/13.7/0.5 v/v with 0.1% of triethylamine and a stoichiometric amount of formic acid. The molecular species were identified by LC/MS. The chromatographic behavior of DGDG on PGC was then compared to previous studies. The addition of a carbon double bond on the alkyl chain decreased the retention. This contribution was less important when the number of unsaturations increased in the alkyl chain. The consequence of this retention behavior with PGC was an elution order of molecular species which did not agree with the partition number as observed with C18 grafted stationary phases.

HPLC Retention Behavior of Poly-Aromatic-Hydrocarbons on Aminopropyl Silica Gels Modified with Cu(II)- and Ni(II)-Phthalocyanine Derivatives in Non-polar Eluent

A comparative study was conducted to elucidate the mechanism underlying the separation of poly-aromatic-hydrocarbons (PAHs) and related compounds thereof on a column packed with silica gels modified with Ni(II)- or Cu(II)-phthalocyanine derivatives (PCS) (Ni- or Cu-PCS(D) column) and commercially available PYE and NPE columns with a non-polar eluent, such as n-hexane. It has been revealed that the dominant interaction responsible to the separation of PAHs on the Cu-PCS(D) and the PYE columns with n-hexane is the pi-pi interaction; however, in the separation of PAHs having 4 rings such as pyrene on the Ni-PCS(D) column, participation of pi-d interaction was indicated. The predominant role of pi-pi interaction in the separation of PAHs of less than three rings on the Ni-PCS(D) column was demonstrated using anthracene. All the columns possessed planar recognition ability and were estimated to be potentially useful in the separation and the analysis of PAHs.

Structure−Function Relationships in High-Density Octadecylsilane Stationary Phases by Raman Spectroscopy. 4. Effects of Neutral and Basic Aromatic Compounds

The effects of aromatic compounds (toluene, benzene, p-xylene, anisole, aniline, and pyridine), temperature, and surface grafting method (surface- or solution-polymerized) on alkyl chain rotational and conformational order in a series of high-density octadecylsilane stationary phases ranging in surface coverage from 3.09 to 6.45 micromol/m2 are examined by Raman spectroscopy. Rotational and conformational order are assessed using the intensity ratio of the antisymmetric to symmetric v(CH2) modes as well as the frequency at which the symmetric v(CH2) band is observed. Alkyl rotational and conformational order decrease with decreasing surface coverage in these aromatic compounds, which is consistent with the behavior of these materials in air and in other solvents. In addition, order of the alkyl chains is dependent on solvent hydrophobicity, hydrogen-bonding ability, and basicity. The most hydrophobic compounds impart disorder to the stationary phase; the hydrogen-bonding aromatics increase the rotational order of homogeneously distributed, high-surface-coverage materials; and basic aromatic compounds increase the conformational order of high- and low-coverage materials as the basic compounds undergo silanophilic interactions with exposed surface silanols. From these observations, molecular pictures of the chromatographic interface that display interactions between the alkyl chains and these aromatic compounds are proposed.

High-performance liquid chromatographic, capillary electrophoretic and capillary electrophoretic-electrospray ionisation mass spectrometric analysis of selected alkaloid groups

Systems for efficient separation of selected alkaloid groups by high performance liquid chromatography (HPLC), capillary electrophoresis (CE) and capillary electrophoresis coupled with electrospray ionisation mass spectrometry (CE-ESI-MS) are described. The optimized HPLC system was applied for the separation of 23 standard indole alkaloids as well as for qualitative and quantitative analyses of crude alkaloid extracts of Rauvolfia serpentina X Rhazya stricta hybrid cell cultures. The developed conditions for CE analysis proved to be efficient for separation of mixtures of standard indole and beta-carboline alkaloids. The described buffer system is also applicable in the combination of CE with electrospray ionisation mass spectrometry. This analytical technique allowed the separation and identification of components of standard indole alkaloid mixture as well as crude extracts of R. serpentina roots, R. serpentina cell suspension cultures and cortex of Aspidosperma quebracho-blanco. The influence of buffer composition and analyte structures on separation is discussed.

Column selectivity from the perspective of the solvation parameter model

The solvation parameter model is a useful tool for delineating the contribution of defined intermolecular interactions to retention of neutral molecules in separation systems based on a solute equilibrium between a gas, liquid or fluid mobile phase and a liquid or solid stationary phase. The free energy for this process is decomposed into contributions for cavity formation and the set up of intermolecular interactions identified as dispersion, electron lone pair, dipole-type and hydrogen bonding. The relative contribution of these interactions is indicated by a series of system constants determined by the difference of the defined interaction in the two phases. The interpretation of these system constants as a function of experimental factors that affect retention in the chromatographic system provides the connection between relative retention (selectivity) and the control variables for the separation system. To aid in the understanding of these processes we perform an analysis of system constants for gas chromatography, liquid chromatography, supercritical fluid chromatography and micellar electrokinetic chromatography as a function of different experimental variables as a step towards gaining a theoretical understanding of selectivity optimization for method development.

Comparison of retention of aromatic hydrocarbons with polar groups in binary reversed-phase high-performance liquid chromatography systems

The retention of aromatic hydrocarbons with polar groups has been correlated as log k1 versus log k2 for reversed-phase high-performance liquid chromatography systems with different binary aqueous mobile phases containing methanol, acetonitrile or tetrahydrofuran as modifiers. Distinct changes in separation selectivity have been observed between tetrahydrofuran and acetonitrile or methanol systems. Methanol and acetonitrile systems show lower diversity of separation selectivity. The changes in retention and selectivity of aromatic hydrocarbons with various polar groups between any two chromatographic systems with binary aqueous eluents (tetrahydrofuran vs. acetonitrile, tetrahydrofuran vs. methanol and methanol vs. acetonitrile) have been interpreted in terms of molecular interactions of the solute with especially one component of the stationary phase region, i.e. extracted modifier, and stationary phase ordering. The ordering of the stationary phase region caused by modifier type influences the chromatographic selectivity of solutes with different molecular shape.

Retention and mass transfer characteristics in reversed-phase liquid chromatography using a tetrahydrofuran-water solution as the mobile phase

The characteristics of the retention and the mass transfer kinetics in reversed-phase liquid chromatography (RPLC) were measured on a system consisting of a C18-silica gel and a tetrahydrofuran-water (50:50, v/v) solution. These parameters were derived from the first and the second moments of the elution peaks, respectively. Further information on the thermodynamic properties of this system was derived from the temperature dependence of these moments. Some correlations previously established were confirmed for this system, namely, an enthalpy-entropy compensation for both retention and surface diffusion and a linear free-energy relationship. These results are compared with those observed in other similar systems using methanol-water (70:30, v/v) and acetonitnile-water (70:30, v/v) solutions. The contribution of surface diffusion to intraparticle diffusion in C18-silica gel particles was shown to be important. The analysis of the thermodynamic properties of surface diffusion suggests that, in these three RPLC systems, its activation energy is lower than the isosteric heat of adsorption. The nature and the extent of the influence of the mobile phase composition on the parameters describing the retention and the mass transfer kinetics are different but the chromatographic mechanisms involved in RPLC systems appear similar, irrespective of the nature of the organic modifier in the mobile phase.

Selectivity of stationary phases in reversed-phase liquid chromatography based on the dispersion interactions

Selectivity of 15 stationary phases was examined, either commercially available or synthesized in-house. The highest selectivity factors were observed for solute molecules having different polarizability on the 3-(pentabromobenzyloxy)propyl phase (PBB), followed by the 2-(1-pyrenyl)ethyl phase (PYE). Selectivity of fluoroalkane 4,4-di(trifluoromethyl)-5,5,6,6,7,7,7-heptafluoroheptyl (F13C9) phase is lowest among all phases for all compounds except for fluorinated ones. Aliphatic octyl (C8) and octadecyl (C18) phases demonstrated considerable selectivity, especially for alkyl compounds. While PBB showed much greater preference for compounds with high polarizability containing heavy atoms than C18 phase, F13C9 phase showed the exactly opposite tendency. These three stationary phases can offer widely different selectivity that can be utilized when one stationary phase fails to provide separation for certain mixtures. The retention and selectivity of solutes in reversed-phase liquid chromatography is related to the mobile phase and the stationary phase effects. The mobile phase effect, related to the hydrophobic cavity formation around non-polar solutes, is assumed to have a dominant effect on retention upon aliphatic stationary phases such as C8, C18. In a common mobile phase significant stationary phase effect can be attributed to dispersion interaction. Highly dispersive stationary phases such as PBB and PYE retain solutes to a significant extent by (attractive) dispersion interaction with the stationary phase ligands, especially for highly dispersive solutes containing aromatic functionality and/or heavy atoms. The contribution of dispersion interaction is shown to be much less on C18 or C8 phases and was even disadvantageous on F13C9 phase. Structural properties of stationary phases are analyzed and confirmed by means of quantitative structure-chromatographic retention (QSRR) study.

Reversed-phase high-performance liquid chromatography on porous copolymers of different chemical structure

The influence of chemical structure of porous polymers on the chromatographic properties of high-performance liquid chromatography columns was studied. Columns were packed with four different porous copolymers: di(methacryloyloxymethyl)naphthalene-divinylbenzene containing ester functional groups, 4,4'-bis(maleimido)diphenylmethane-divinylbenzene with imide groups, di(4,4'-dimethacrylphenyl)sulfone-divinylbenzene which contains sulphonyl groups, and styrenedivinylbenzene with any functional groups. Using the alkyl aryl ketone scale, the retention indices of five homologous series (alkylbenzenes, alkyl aryl ketones, N-alkylanilines, alkyl aryl ethers, alkylbenzoates) and column test compounds (toluene, nitrobenzene, p-cresol, 2-phenylethanol, N-methylaniline) were calculated. Their values were used for comparison of the selectivities of the studied polymeric packings.

Characterization of reversed-phase columns using the linear free energy relationship. III. Effect of the organic modifier and the mobile phase composition

Retention factors determined for 31 solutes of widely different types on five columns of different chromatographic characteristics have been used to calculate the regression coefficients of the linear free energy relationship (LFER) equations. The mobile phases investigated consisted of acetonitrile-water and methanol-water, respectively, in a composition range of 20-70% (v/v) of organic modifiers. The regression coefficients of the LFER equations are characteristic of the given phase system (stationary phase, organic modifier and mobile phase composition) and represent the extent of the various molecular interactions contributing to the retention process. The effect of the characteristic of the stationary phase, the type of the organic modifier and the mobile phase composition is demonstrated and discussed. Alpha selectivity factors have been determined for various pairs of compounds. Hydrophobic or methylene selectivity can be described by the variation of the upsilon coefficient in Eq. (3) representing the difference in hydrophobicity between the stationary phase and the mobile phase. The polar or chemical selectivity of a phase system varies with the b coefficient in Eq. (3) representing the difference in acidity between the stationary phase and the mobile phase. Polar selectivity, i.e. the relative retention of polar solutes to that of a non-polar solute, e.g. toluene decreases with increasing polarity of the mobile phase. It depends also significantly on the polar characteristics of the columns. Specific selectivity, i.e. the relative retention of various polar solutes depends on the acidic or basic properties of the solutes to be separated and the chemical properties of the columns. The b regression coefficients can be used to describe the effect of mobile phase composition on the variation of specific selectivities. We have demonstrated that the LFER method provides a useful estimate of selectivity under different operating conditions by using the solvation parameters describing the different molecular interactions and the regression coefficients of the LFER equation characterizing the phase system.

Stationary-phase contribution of 1-propanol organic modifier to changes in sorption of 1-hexanol on an ODS-bonded phase

Using the reversed-phase bonded-phase HPLC packing Partisil-10 ODS-3, sorption isotherms have been measured for the alcohols 1-propanol (PrOH) and 1-hexanol (HexOH), and as well, a simultaneous sorption curve for the two alcohols has been measured from solutions containing a low and constant concentration of HexOH as sample with increasing concentrations of PrOH as organic modifier. The mobile-phase effect of PrOH is quantified by solution-phase activity coefficients obtained either from vapor/solution equilibrium measurements or from cloud point measurements. Since sorbed alcohols are located at the ODS/solution interface, the stationary-phase effect of PrOH is modeled in terms of three processes: (i) competition for space; (ii) decrease of space required per mole with increasing concentration of sorbed PrOH; and (iii) change of free energy of sorption with increasing concentration of sorbed PrOH. The model yields excellent fits to the isotherms and to the simultaneous sorption curve. Comparison of the model-fitting parameters for the simultaneous sorption curve with those for the PrOH isotherm confirms that the stationary-phase effect of PrOH on HexOH is due exclusively to processes i and ii. Sorbed PrOH causes rearrangement of the C18 chains of the ODS phase. For volume percent PrOH less than 15% in the mobile phase, the effect of PrOH on sample sorption is nearly exclusively in the stationary phase. Between 15 and 30%, both mobile- and stationary-phase effects are important.