Liquid chromatographic determination of the macrolide antibiotics roxithromycin and clarithromycin in plasma by automated solid-phase extraction and electrochemical detection

Analytical methods for determining environmental contaminants of concern in water and wastewater

Control and prevention of environmental pollution have emerged as paramount global concerns. Anthropogenic activities, such as industrial discharges, agricultural runoff, and improper waste disposal, introduce a wide range of contaminants into various ecosystems. These pollutants encompass organic and inorganic compounds, particulates, microorganisms, and disinfection by-products, posing severe threats to human health, ecosystems, and the environment. Effective monitoring methods are indispensable for assessing environmental quality, identifying pollution sources, and implementing remedial measures. This paper suggests that the development and utilization of highly advanced analytical tools are both essential for the analysis of contaminants in water samples, presenting a foundational hypothesis for the review. This paper comprehensively reviews the development and utilization of highly advanced analytical tools which is mandatory for the analysis of contaminants in water samples. Depending on the specific pollutants being studied, the choice of analytical methods widely varies. It also reveals insights into the diverse applications and effectiveness of these methods in assessing water quality and contaminant levels. By emphasizing the critical role of the reviewed monitoring methods, this review seeks to deepen the understanding of pollution challenges and inspire innovative monitoring solutions that contribute to a cleaner and more sustainable global environment.•Urgent global concerns: control and prevention of pollution from diverse sources.•Varied contaminants, diverse methods: comprehensive review of analytical tools.•Inspiring a sustainable future: innovative monitoring for a cleaner environment.

Development and validation of high-performance liquid chromatography method for determination of clarithromycin in pharmaceutical tablets

Clarithromycin is a very important macrolide antibiotic used to treat bacterial infections in human and veterinary medicine. This study reports the development and validation of cost-effective, simple, precise, accurate, and robust high-performance liquid chromatography (HPLC) for the determination of clarithromycin (CLA) in tablets. Reversed-phase chromatography was conducted using a standard column at 55°C with ultraviolet detection at 215 nm. A mobile phase consisting of acetonitrile -2-methyl-2-propanol -potassium phosphate buffer was used at a flow rate of 1.0 mL/min. The proposed method displayed good linearity, precision, accuracy, robustness, and specificity. The present HPLC was compared with capillary electrophoresis and bioassay methods and the results indicated that there was no significant difference between these methods. Moreover, the obtained results demonstrated the validity of the isocratic HPLC, which allows reliable quantitation of CLA in pharmaceutical samples. Thus, it can be used as a substitute alternative methodology for the routine quality control of this medicine, in situations where other methods are less accessible in the laboratory.

Pharmacokinetic study of clarithromycin in human breast milk by UPLC-MS/MS

This study aimed to develop a validated UPLC-MS/MS method for pharmacokinetic analysis of clarithromycin in human breast milk. For sample preparation, proteins precipitated with methanol and azithromycin were used as internal standards. Clarithromycin and azithromycin detection was achieved using electrospray ionization in positive mode. The chromatographic separation time was 5 min. The lower limit of quantification was 50 ng/mL. The calibration curve of clarithromycin was 50-4000 ng/mL, with a correlation coefficient> 0.99. The method was successfully applied to determine clarithromycin levels in breast milk obtained from a lactating mother after oral administration of a single tablet containing 500 mg of clarithromycin. The maximum human breast milk concentration (C_max) was 3660 ng/mL, the time to reach the maximum concentration (t_max) was 2.5 h, and the area under curve (AUC_0-24) was 18450 ng h/mL. The present study provides a novel UPLC-MS/MS method for pharmacokinetic analysis of clarithromycin in breast milk.

Pharmaceuticals residues and xenobiotics contaminants: Occurrence, analytical techniques and sustainable alternatives for wastewater treatment

Emerging contaminants are increasingly present in the environment, and their appearance on both the environment and health of living beings are still poorly understood by society. Conventional sewage treatment facilities that are under validity and were designed years ago are not developed to remove pharmaceutical compounds, their main focus is organic and bacteriological removal. Pharmaceutical residues are associated directly with quantitative production aspects as well as inadequate waste management policies. Persistent classes of emerging compounds such as xenobiotics present molecules whose physicochemical properties such as small molecular size, ionizability, water solubility, lipophilicity, polarity and volatility make degradability, identification and quantification of these complex compounds difficult. Based on research results showing that there is a possibility of risk to human and environmental health the presence of these compounds in the environment this article aimed to review the main pharmaceutical and xenobiotic residues present in the environment, as well as to present the most common methodologies used. The most commonly used analytical methods for identifying these compounds were HPLC and Gas Chromatography coupled with mass spectrometry with potential for characterize complex substances in the environment with low concentrations. An alternative and low-cost technology for emerging compound treatment demonstrated in the literature with a satisfactory performance for several types of sewage such as domestic sewage, wastewater and agroindustrial, was the Wetlands Constructed. The study was able to identify the main compounds that are being found in the environment and identify the most used analytical methods to identify and quantify these compounds, bringing some alternatives combining technologies for the treatment of compounds. Environmental contamination is eminent, since the production of emerging compounds aims to increase along with technological development. This demonstrates the need to explore and aggregate sewage treatment technologies to reduce or prevent the deposition of these compounds into the environment.

Stability Indicating HPLC-ECD Method for the Analysis of Clarithromycin in Pharmaceutical Dosage Forms: Method Scaling versus Re-Validation

An isocratic high-performance liquid chromatographic method using electrochemical detection (HPLC-ECD) for the quantitation of clarithromycin (CLA) was developed using Response Surface Methodology (RSM) based on a Central Composite Design (CCD). The method was validated using International Conference on Harmonization (ICH) guidelines with an analytical run time of 20 min. Method re-validation following a change in analytical column was successful in reducing the analytical run time to 13 min, decreasing solvent consumption thus facilitating environmental and financial sustainability. The applicability of using the United States Pharmacopeia (USP) method scaling approach in place of method re-validation using a column with a different L–designation to the original analytical column, was investigated. The scaled method met all USP system suitability requirements for resolution, tailing factor and % relative standard deviation (RSD). The re-validated and scaled method was successfully used to resolve CLA from manufacturing excipients in commercially available dosage forms. Although USP method scaling is only permitted for columns within the same L-designation, these data suggest that it may also be applicable to columns of different designation.

Brief Overview of Frequently used Macrolides and Analytical Techniques for their Assessment

Background:

Macrolide antibiotics are known as versatile broad-spectrum antibiotics. Macrolides belong to the oldest group of antibacterial agents. The macrolides which are frequently used for clinical purposes are broadly categorized in three classes depending on the number of membered macrocyclic lactone ring. These three classes actually consist of 14, 15 or 16 atoms in macrocyclic lactone ring which are linked through glycosidic bonds. Erythromycin, azithromycin clarithromycin and roxithromycin are frequently used to control against bacterial infections.

Methods:

The quality assurance and quality controls are important tasks in the pharmaceutical industries. Consequently, to check the quality of drugs, there is a strong need to know about alternative analytical methods for the routine analysis. Many methods have been reported in the literature for the quantitative determination of erythromycin, clarithromycin, azithromycin and clarithromycin in pharmaceutical formulations and biological samples.

Results:

This review will cover a brief introduction of erythromycin, azithromycin, clarithromycin and roxithromycin as well as analytical techniques for their assessment. Each developed method has its own merits and demerits.

Conclusion:

Any accurate method could be used for the quality control and quality assurance of macrolide antibiotics according to the availability, performance and procedure of selected instrument as well as skill and expertise of the analyst.

Development of a predictive in vitro dissolution for clarithromycin granular suspension based on in vitro-in vivo correlations

The objective of this study was to evaluate the in vitro behavior of different clarithromycin granular suspensions based on a developed in vitro-in vivo correlation model, using one reference and two test formulations. In vitro release rate data were obtained for each product using the USP apparatus II, operated at 50 rpm under different pH conditions. The dissolution efficiency was used to analyze the dissolution data. In vivo study was performed on six healthy male volunteers under fasting condition. Correlation was made between in vitro release and in vivo absorption. A linear model was developed using percent absorbed data versus percent dissolved data from the three products. Dissolution condition of 0.1N HCl for 1 h and then phosphate buffer at pH 6.8 was found to be the most discriminating dissolution method. Rate of absorption for the reference as estimated by Wagner-Nelson deconvolution was correlated with in vitro release with a correlation coefficient of 0.99. The in vivo results for the two test products were compared to the predicted values using the reference model with a correlation coefficient of 0.94. Furthermore, multiple level C correlations were obtained for some pharmacokinetic parameters with the corresponding in vitro kinetic parameters with correlation coefficients exceeding 0.90. Moreover, the interpretation of the in vitro and in vivo data with reference to formulations was discussed.

Simplified method for determination of clarithromycin in human plasma using protein precipitation in a 96-well format and liquid chromatography-tandem mass spectrometry

A simplified method to determine clarithromycin concentrations in human plasma using protein precipitation in a 96-well plate and liquid chromatography-tandem mass spectrometry was developed and validated. Plasma proteins were precipitated with acetonitrile and roxithromycin was used as the internal standard. After vortex mixing and centrifugation, the supernatants were directly injected onto a Phenomenex Luna Phenyl-Hexyl column (50 mm x 2.0 mm ID, 3 microm). The mobile phase consisted of water and methanol (30:70, v/v) containing 0.1% formic acid and 5mM ammonium acetate. The flow rate was 0.22 mL/min and the total run time (injection to injection) was less than 3 min. Detection of the analytes was achieved using positive ion electrospray tandem mass spectrometry in selected reaction monitoring (SRM) mode. The linear standard curve ranged from 100 to 5000 ng/mL and the precision and accuracy (inter- and intra-run) were within 7.9% and 4.9%, respectively. The method was successfully used to determine clarithromycin concentrations in human plasma samples obtained from healthy subjects who were given clarithromycin 500 mg for 3 days. The method is rapid, simple, precise and directly applicable to clarithromycin pharmacokinetic studies.

Determination of clarithromycin in human serum by high-performance liquid chromatography after pre-column derivatization with 9-fluorenylmethyl chloroformate: Application to a bioequivalence study

A sensitive liquid chromatographic method for the analysis of clarithromycin, a macrolide antibiotic, in human serum using pre-column derivatization with 9-fluorenylmethyl chloroformate (FMOC-Cl) is described. The method involved liquid-liquid extraction of the drug and an internal standard (amantadine) followed by pre-column derivatization of the analytes with FMOC-Cl. A mixture of 0.05 M phosphate buffer containing triethylamine (2 mL L(-1); pH 3.8) and methanol (17:83, v/v) was used as mobile phase and chromatographic separation was achieved on a Shimpack CLC-ODS column. The eluate was monitored by a fluorescence detector with respective excitation and emission wavelengths of 265 and 315 nm. The analytical method was linear over the concentration range of 0.025-10 microg mL(-1) of clarithromycin in human serum with a limit of quantification of 0.025 microg mL(-1). The assay is sensitive enough to measure drug levels obtained in human single dose studies. In the present method, sensitivity and run time of analysis have been improved, and successfully applied in a bioequivalence study of three different clarithromycin preparations in 12 healthy volunteers.

Determination of clarithromycin in human plasma by liquid chromatography–electrospray ionization tandem mass spectrometry

A rapid and sensitive method has been developed for the determination of clarithromycin in human plasma with liquid chromatography-tandem mass spectrometry. Clarithromycin and the internal standard, telmisartan were precipitated from the matrix (50 microl) with 200 microl acetonitrile and separated by HPLC using formic acid:10 mM ammonium acetate:methanol (1:99:400, v/v/v) as the mobile phase. The assay based on detection by electrospray positive ionization mass spectrometry in the multiple-reaction monitoring mode was finished within 2.4 min. Linearity was over the concentration range 10-5000 ng/ml with a limit of detection of 0.50 ng/ml. Intra- and inter-day precision measured as relative standard deviation were <3.73% and <9.93%, respectively. The method was applied in a bioequivalence study of two tablet formulations of clarithromycin.

Liquid chromatography–UV diode-array detection method for multi-residue determination of macrolide antibiotics in sheep's milk

A rapid, simple and sensitive liquid chromatography-UV diode-array detection method was developed for the simultaneous determination of seven macrolides (erythromycin, oleandomycin, roxithromycin, josamycin, spiramycin, tylosin and ivermectin) in sheep's milk. The column, mobile phase, temperature and flow rate were optimised to provide the best resolution of these analytes. The extraction of the antibiotic residues involves the treatment of protein-free samples with a combination of concentrated sodium hydroxide and ethyl acetate. Necessary defatting is achieved by alkaline hydrolysis. The recovery of each antibiotic was between 55% and 77%, with relative standard deviations ranging from 1% to 6.5%. The limit of quantification was 72.4 microg/kg for ivermectin, 48.3 microg/kg for roxithromycin, and 24.1 microg/kg for erythromycin, oleandomycin, spiramycin, josamycin and tylosin. The procedure was successfully used in the multi-residue determination of these macrolides at levels below the maximum concentrations legally allowed in milk samples.

Analysis of macrolide antibiotics by liquid chromatography

A compilation of the most representative single and multianalyte HPLC methods for the analysis of macrolide antibiotics published during the last two decades is presented in this paper. Its scope is the coverage of two main areas which require the determination of macrolide antibiotics at a low concentration level, i.e. pharmacokinetic studies and residue analysis. Both of these areas involve the treatment of biological and foodstuff matrices, respectively. A detailed explanation of the different sample preparation procedures as well as the experimental conditions and the main analytical features are provided for each referred method in order to allow the reader to select the most suitable conditions for their particular purpose.

Validated HPLC–MS–MS method for determination of azithromycin in human plasma

A validated, highly sensitive, and selective HPLC method with MS-MS detection has been developed for quantitative determination of azithromycin (AZI) in human Na2EDTA plasma. Roxithromycin (ROX) was used as internal standard. Human plasma containing AZI and internal standard was ultrafiltered through Centrifree Micropartition devices and the concentration of AZI was determined by isocratic HPLC-MS-MS. Multiple reaction monitoring mode (MRM) was used for MS-MS detection. The calibration plot was linear in the concentration range 2.55-551.43 ng mL(-1). Inter-day and Intra-day precision and accuracy of the proposed method were characterized by R.S.D and percentage deviation, respectively; both were less than 8%. Limit of quantification was 2.55 ng mL(-1). The proposed method was used to determine the pharmacokinetic profile of AZI (250-mg tablets).

Quantification of clarithromycin, its 14-hydroxy and decladinose metabolites in rat plasma, gastric juice and gastric tissue using high-performance liquid chromatography with electrochemical detection

A rapid, selective and sensitive HPLC assay has been developed for the simultaneous analysis of clarithromycin, its 14-hydroxy-clarithromycin metabolite, and its decladinose acid degradation product, in small volumes of rat gastric juice aspirate, plasma and gastric tissue. Sample were extracted with n-hexane/2-butanol (4:1) and the internal standard was roxithromycin. A Kromasil ODS 5 micrometer(75x4.6 mm I.D.) column was used with a mobile phase consisting of acetonitrile/aqueous phosphate buffer (pH 7, 0.086 M) (45:55 v/v). The column temperature was 30 degrees C and coulometric detection was used at 850 mV using a screen voltage of 600 mV. The analysis time was less than 8 min. The limits of quantitation for clarithromycin, 14-OH clarithromycin and decladinose clarithromycin were 0.15 microgram ml(-1) or lower in plasma (0.05 ml); 0.16 microgram ml(-1) or lower in gastric juice (0.2 ml); and 0.51 microgram g(-1) or lower for gastric tissue (0.25 g). The method was linear up to at least 20.3, 15.4 and 12.5 microgram ml(-1) for clarithromycin, 14-OH-clarithromycin and decladinose, respectively, in gastric juice aspirate and plasma and up to 40.6, 30.9 and 25.0 microgram g(-1) in gastric tissue. The assay was applied to the measurement of clarithromycin, 14-OH-clarithromycin and, for the first time, decladinose clarithromycin in pharmacokinetic studies of gastric transfer of clarithromycin in individual rats.

Sensitive liquid chromatography-tandem mass spectrometry method for the determination of clarithromycin in human plasma

A sensitive method for the determination of clarithromycin in plasma is described, using high-performance liquid chromatographic separation with tandem mass spectrometric detection. Samples were prepared using liquid-liquid extraction and separated on a Supelco Discovery C18 column with a mobile phase consisting of acetonitrile, methanol and acetic acid. Detection was performed by a PE SCIEX API 2000 mass spectrometer in the multiple reaction monitoring (MRM) mode (LC-MS-MS) using TurbolonSpray ionization and monitoring the transition of the protonated molecular ion for clarithromycin at m/z 748.5 (M+1) to the predominant product ion of m/z 158.2. The mean recovery of clarithromycin was 87.3%, with a lower limit of quantification of 2.95 ng/ml when using 0.3-ml plasma. This high-throughput method was used to quantify 230 samples per day, and is sufficiently sensitive to be employed in pharmacokinetic studies.

Spectrofluorimetric analysis of certain macrolide antibiotics in bulk and pharmaceutical formulations

The macrolides (erythromycin, erythromycin esters, azithromycin dihydrate, clarithromycin and roxithromycin) can be analyzed by a simple spectrofluorimetric method based on the oxidation by cerium(VI) in the presence of sulphuric acid and monitoring the fluorescence of cerium(III) formed at lambda(ex) 255 nm and lambda(em) 348 nm. All variables affecting the reaction conditions as cerium(VI), sulphuric acid concentrations, heating time, temperature and dilution solvents were carefully studied. Linear calibration graphs were obtained in the range of 42.6-1200 ng ml(-1) with a percentage relative standard deviation in the range of 0.014-0.058%. Quantitation and detection limits were calculated. The method was applied successfully for the assay of the studied drugs in pure and pharmaceutical dosage forms as tablets, capsules and suspension. Recovery experiments revealed recovery of 98.3-100.8%. The effect of potential interference due to common ingredients as glucose, sucrose, lactose, citric acid, and propylene glycol was investigated. Applying standard addition method shows a recovery of 97.7-100.9% macrolide antibiotics from their corresponding dosage forms.

Determination of clarithromycin in human plasma by HPLC with electrochemical detection: validation and application in pharmacokinetic study

A rapid, specific, precise and accurate HPLC method with electrochemical detection was developed and validated for the determination of clarithromycin in human plasma. After addition of the internal standard, the analytes were extracted from plasma under alkaline conditions with ethyl acetate:hexane 1:1. The inter-run precision of the method was less than 4.7%, the inter-run accuracy was better than 97.3% and the recovery of clarithromycin and roxithromycin (internal standard) were better than 82.5% and 86.2%, respectively. The method was found to be suitable for the quantitation of clarithromycin in bioequivalence and pharmacokinetic studies.

Study on the electrochemical detection of the macrolide antibiotics clarithromycin and roxithromycin in reversed-phase high-performance liquid chromatography

The optimal conditions of the amperometric detection of the macrolide antibiotics clarithromycin and roxithromycin were found by cyclic voltammetric studies and HPLC-electrochemical detection responses obtained in different temperatures (25.5-60 degrees C) and different but almost isoelutropic binary, ternary and quaternary mixtures of aqueous buffer (pH 7), methanol, acetonitrile and isopropanol. These conditions were also proved to be applicable for the quantitative detection of clarithromycin in human plasma using roxithromycin as an internal standard and vice versa. It was demonstrated that increased attention has to be paid to eluent composition and column temperature to ensure sensitive and reproducible electrochemical responses as well as regularly shaped peaks for both macrolides tested.

Automating solid-phase extraction: current aspects and future prospects

This paper reviews current trends and techniques in automated solid-phase extraction. The area has shown a dramatic growth the number of manuscripts published over the last 10 years, including applications in environmental science, food science, clinical chemistry, pharmaceutical bioanalysis, forensics, analytical biochemistry and organic synthesis. This dramatic increase of more that 100% per year can be attributed to the commercial availability of higher throughput 96-well workstations and extraction plates that allow numerous samples to be processed simultaneously. These so-called parallel-processing workstations represent the highest throughput systems currently available. The advantages and limitations of other types of systems, including discrete column systems and on-line solid-phase extraction are also discussed. Discussions of how automated solid-phase extractions can be developed, generic approaches to automated solid-phase extraction, and three noteworthy examples of automated extractions are given. The last part of the review suggests possible near- and long-term directions of automated solid-phase extraction.

The transplacental transfer of the macrolide antibiotics erythromycin, roxithromycin and azithromycin

OBJECTIVE

To investigate the transplacental transfer of the macrolide antibiotics erythromycin, roxithromycin and azithromycin.

METHODS

Twenty-one term placentas were obtained with maternal consent immediately after delivery and a two-hour nonrecirculating perfusion of a single placental cotyledon was performed. Erythromycin (2 microg/mL), roxithromycin (2 microg/mL) and azithromycin (0.3 microg/mL) were infused to the maternal inflow at a constant rate, with antipyrine as a reference compound, and their appearance in the fetal circulation was followed. Drug concentrations were measured by high performance liquid chromatography for 120 min.

RESULTS

The mean transplacental transfers (TPT(SS)) for erythromycin, roxithromycin and azithromycin were 3.0%, 4.3% and 2.6%, respectively, calculated as the ratio between the steady state concentrations in fetal venous and maternal arterial sides. Similar results were obtained when the TPT was calculated as the absolute amount of drug transferred across the placenta during 2-hour perfusion (TPT(A)). No significant differences were found among the three macrolides in TPT(SS) (P = 0.39) or TPT(A) (P = 0.35). The TPT(SS) of erythromycin, roxithromycin and azithromycin were 41%, 35% and 32% of the freely diffusable reference compound antipyrine, respectively. Steady state was reached in 60 minutes in each perfusion indicating sufficient perfusion time.

CONCLUSION

The limited transplacental transfer of erythromycin, roxithromycin and azithromycin suggests compromised efficacy in the treatment of fetal infections. On the other hand, the placenta seems to produce an effective barrier reducing the fetal exposure when these three macrolides are used to treat maternal infections.

Determination of erythromycin, clarithromycin, roxithromycin, and azithromycin in plasma by high-performance liquid chromatography with amperometric detection

In this study, a high-performance liquid chromatographic method was developed for the quantitative determination of erythromycin (EM), roxithromycin (RXM), and azithromycin (AZM) in rat plasma with amperometric detection under a standardized common condition using clarithromycin (CAM) as an internal standard. This method was also proved to be applicable for the determination of CAM by employing RXM as an internal standard. Each drug was extracted from 150 microl of plasma sample spiked with internal standard under an alkaline condition with tert.-butyl methyl ether. The detector cell potential for the oxidation of the drugs was set at +950 mV. The linearity of the calibration curves were preserved over the concentration ranges of 0.1-10 microg/ml for EM and RXM, and 0.03-3.0 microg/ml for CAM and AZM. Coefficients of variation and relative error were less than 9% and +/-7%, respectively. The analytical method presented here was proved to be useful for the investigation of the pharmacokinetic characteristics of EM, CAM, RXM, and AZM in rats.

Clinical pharmacokinetics of clarithromycin

Clarithromycin is a macrolide antibacterial that differs in chemical structure from erythromycin by the methylation of the hydroxyl group at position 6 on the lactone ring. The pharmacokinetic advantages that clarithromycin has over erythromycin include increased oral bioavailability (52 to 55%), increased plasma concentrations (mean maximum concentrations ranged from 1.01 to 1.52 mg/L and 2.41 to 2.85 mg/L after multiple 250 and 500 mg doses, respectively), and a longer elimination half-life (3.3 to 4.9 hours) to allow twice daily administration. In addition, clarithromycin has extensive diffusion into saliva, sputum, lung tissue, epithelial lining fluid, alveolar macrophages, neutrophils, tonsils, nasal mucosa and middle ear fluid. Clarithromycin is primarily metabolised by cytochrome P450 (CYP) 3A isozymes and has an active metabolite, 14-hydroxyclarithromycin. The reported mean values of total body clearance and renal clearance in adults have ranged from 29.2 to 58.1 L/h and 6.7 to 12.8 L/h, respectively. In patients with severe renal impairment, increased plasma concentrations and a prolonged elimination half-life for clarithromycin and its metabolite have been reported. A dosage adjustment for clarithromycin should be considered in patients with a creatinine clearance < 1.8 L/h. The recommended goal for dosage regimens of clarithromycin is to ensure that the time that unbound drug concentrations in the blood remains above the minimum inhibitory concentration is at least 40 to 60% of the dosage interval. However, the concentrations and in vitro activity of 14-hydroxyclarithromycin must be considered for pathogens such as Haemophilus influenzae. In addition, clarithromycin achieves significantly higher drug concentrations in the epithelial lining fluid and alveolar macrophages, the potential sites of extracellular and intracellular respiratory tract pathogens, respectively. Further studies are needed to determine the importance of these concentrations of clarithromycin at the site of infection. Clarithromycin can increase the steady-state concentrations of drugs that are primarily depend upon CYP3A metabolism (e.g., astemidole, cisapride, pimozide, midazolam and triazolam). This can be clinically important for drugs that have a narrow therapeutic index, such as carbamazepine, cyclosporin, digoxin, theophylline and warfarin. Potent inhibitors of CYP3A (e.g., omeprazole and ritonavir) may also alter the metabolism of clarithromycin and its metabolites. Rifampicin (rifampin) and rifabutin are potent enzyme inducers and several small studies have suggested that these agents may significantly decrease serum clarithromycin concentrations. Overall, the pharmacokinetic and pharmacodynamic studies suggest that fewer serious drug interactions occur with clarithromycin compared with older macrolides such as erythromycin and troleandomycin.

Macrolide and ketolide antibiotic separation by reversed phase high performance liquid chromatography

Twenty different macrolide and ketolide antibiotics were analyzed by reversed phase high performance liquid chromatography on an ODS-2 cartridge column. Each of these compounds was uniquely separated and purified by varying the flow rate. Retention times of the individual drugs were proportional to the flow rate of the mobile phase. Recovery of antimicrobial activity for most of the drugs was greater than 90% based on a microbiological assay of material recovered from the column. Retention times were related to structural differences between these antimicrobial agents.

Liquid-liquid extraction in the 96-well plate format with SRM LC/MS quantitative determination of methotrexate and its major metabolite in human plasma

A method involving the semirobotic liquid-liquid extraction (LLE) in deep-well 96-well plates was developed for the quantitation of the anti-cancer/antiinflammatory drug methotrexate (MTX) and its major metabolite, 7-hydroxymethotrexate (7OH-MTX) in human plasma. The extraction time for the sample preparation was relatively short with four 96-well plates (384 samples) prepared in approximately 90 min by one person. The sample extracts were each analyzed within 1.2 min using a positive ion turbo-ionspray selected reaction monitoring liquid chromatography/mass spectrometric (SRM LC/MS) method in which 768 samples were easily analyzed within 22 h (maximum of 820 samples in 24 h). Deuterated internal standards, MTX-d3 and 7OH-MTX-d3, were used. The calibration curves for MTX and 7OH-MTX were linear (R2 > 0.997) and ranged from 0.5 to 250 and 0.75 to 100 ng/mL, respectively. The limit of quantitation (LOQ) for MTX and 7OH-MTX was 0.5 and 0.75 ng/mL, respectively; persistent carryover from the autosampler limited the LOQ achievable. The limit of detection (LOD) was 0.05 ng/mL for MTX and 0.1 ng/mL for 7OH-MTX. The intra- and inter-assay precision and accuracy did not exceed 15% for both MTX and 7OH-MTX. The recoveries were 61% for MTX and 47% for 7OH-MTX. The method was validated and demonstrated to be robust with high precision and accuracy.

High-performance liquid chromatographic method for the simultaneous determination of the camptothecin derivative irinotecan hydrochloride, CPT-11, and its metabolites SN-38 and SN-38 glucuronide in rat plasma with a fully automated on-line solid-phase extraction system, PROSPEKT

We established a high-performance liquid chromatography (HPLC) method for the simultaneous determination of the camptothecin (CPT) derivative, irinotecan hydrochloride (CPT-11) and its metabolites, 7-ethyl-10-hydroxycamptothecin (SN-38) and SN-38 glucuronide (SN-38G) in rat plasma with a fully automated on-line solid-phase extraction system, PROSPEKT. Plasma samples were pretreated with 0.146 M H3PO4 to inactivate carboxylesterase and beta-glucuronidase in rat plasma, and added with the internal standard solution (0.146 M H3PO4 containing 1 microgram/ml CPT) and then analyzed. The method was validated for CPT-11 (5 to 25,000 ng/ml), SN-38 (5 to 2500 ng/ml) and SN-38G (2.5 to 500 ng/ml). This method enabled the determination of many samples within a relatively short time with easy sample preparation. It also had four advantages compared with conventional determination methods, i.e. automation of a complicated sample preparation, time-saving by the simultaneous determination of three compounds, the direct determination of SN-38G, and the small amount of plasma required for the determination.

Determination of roxithromycin in human plasma by high-performance liquid chromatography with spectrophotometric detection

A simple and reproducible method for the determination of roxithromycin in human plasma is presented. This method is based on liquid-liquid extraction with hexane-isoamylalcohol (98:2, v:v) and reversed-phase chromatography with spectrophotometric detection at 220 nm. The mobile phase consists of methanol-15 mM dihydrogen potassium phosphate (70:30, v:v), pH of the aqueous part of the mobile phase is 6.0. The column is operated at 60 degrees C. Clarithromycin is used as the internal standard. The limit of quantitation is 0.5 microg/ml and the calibration curve is linear up to 30 microg/ml. Within-day and between-day precision expressed by relative standard deviation is less than 5% and inaccuracy does not exceed 9%. The assay was used for pharmacokinetic studies.

Quantitative determination of the macrolide antibiotics erythromycin, roxithromycin, azithromycin and clarithromycin in human serum by high-performance liquid chromatography using pre-column derivatization with 9-fluorenylmethyloxycarbonyl chloride and fluorescence detection

A validated, highly sensitive and precise high-performance liquid chromatographic (HPLC) method for the determination of the macrolides erythromycin, azithromycin, clarithromycin and roxithromycin in human serum is described. A diethyl ether extract, obtained from serum using a saturated sodium carbonate solution, was treated with 9-fluorenylmethyl-oxycarbonyl chloride (FMOC-Cl) for 40 min at 40 degrees C and chromatographed on a base-deactivated octadecyl column, maintained at 50 degrees C during elution, using an eluent composed of acetonitrile-hydrogenphosphate buffer, pH 7.5, with 0.125% triethylamine (3:2, v/v). Fluorescence detection was used at an excitation wavelength of 255 nm and an emission wavelength of 315 nm. Erythromycin, clarithromycin, roxithromycin and azithromycin were found to have retention times of 8.8, 15.7, 17.1 and 20.7 min, respectively. Recoveries ranging from 93 to 104% were found with reproducibility coefficients of variation of 1.1-5%. Mean correlation coefficients of 0.9997, 0.9998, 0.9996 and 0.9994 were found for the linear calibration curves (n = 2) of erythromycin (0.320-16.1 mg/l), roxithromycin (3.24-19.4 mg/l), clarithromycin (0.190-19.4 mg/l) and azithromycin (0.0988-4.94 mg/l), respectively.

Determination of antibiotics in different water compartments via liquid chromatography-electrospray tandem mass spectrometry

For the determination of 18 antibiotics in water samples down to the lower ng/l range, an analytical multi method is presented. The analytes belong to different groups of antibiotics such as penicillins, tetracyclines, sulfonamides and macrolid antibiotics. Samples were enriched using a universal freeze-drying procedure or a solid-phase extraction facultatively. Analysis was performed by liquid chromatography with electrospray-tandem MS detection. Chromatography required different columns and eluents. Mean recovery rates were in excess of 70%, however, with one exception and a quantitation limit of 50 ng/l for the tetracyclines and 20 ng/l for all other antibiotics were set.

Determination of macrolides in biological matrices by high-performance liquid chromatography with electrochemical detection

A liquid chromatographic method for the determination of macrolide antibiotics is described using a cyanopropyl column which proved to be as efficient or superior to the normally used apolar reversed-phase columns. The recovery of the macrolides from water and plasma was 80-90%. Using 0.5 ml of plasma, 30 ng/ml of clarithromycin, 50 ng/ml of roxithromycin and 10 ng/ml of azithromycin could be determined with acceptable precision and accuracy. The method has been employed in pharmacokinetic studies in humans for the determination of roxithromycin, clarithromycin and azithromycin in plasma, serum and other biological matrices. The particular selectivity of the cyanopropyl phase may also allow the simultaneous determination of erythromycin and its prodrug esters.

Analysis of macrolide antibiotics

The following macrolide antibiotics have been covered in this review: erythromycin and its related substances, azithromycin, clarithromycin, dirithromycin, roxithromycin, flurithromycin, josamycin, rokitamycin, kitasamycin, mycinamycin, mirosamycin, oleandomycin, rosaramicin, spiramycin and tylosin. The application of various thin-layer chromatography, paper chromatography, gas chromatography, high-performance liquid chromatography and capillary zone electrophoresis procedures for their analysis are described. These techniques have been applied to the separation and quantitative analysis of the macrolides in fermentation media, purity assessment of raw materials, assay of pharmaceutical dosage forms and the measurement of clinically useful macrolide antibiotics in biological samples such as blood, plasma, serum, urine and tissues. Data relating to the chromatographic behaviour of some macrolide antibiotics as well as the various detection methods used, such as bioautography, UV spectrophotometry, fluorometry, electrochemical detection, chemiluminescence and mass spectrometry techniques are also included.

Evaluation of an on-line solid-phase extraction method for determination of almokalant, an antiarrhythmic drug, by liquid chromatography

A fully automated liquid chromatographic method based on a Prospekt solid-phase extraction unit is described for determination of the antiarrhythmic drug almokalant in plasma. The assay comprises solid-phase extraction on a C2 phase and separation on a C18 column with fluorometric detection. In the original procedure 40 samples a day could be run unattended but by modifying the sequence in the solid-phase extraction process it was possible to increase this number to 70. The method gives an absolute recovery of 92% and a repeatability (C.V.) of 2.9% at 75 nmol/l of plasma. The limit of quantitation is 2 nmol/l of plasma (C.V. < 20%). As regards accuracy and precision the performance of the method is as good as the manual method based on liquid-liquid extraction. The Prospekt method is, above all, faster and requires far less manual effort.