Separation of tryptophan and related indoles by micellar electrokinetic chromatography with KrF laser-induced fluorescence detection

Bioanalytical applications of capillary electrophoresis with laser-induced native fluorescence detection

In this article we describe recent developments and applications of capillary electrophoresis (CE) coupled with laser-induced native fluorescence (LINF) detection in the analysis of biological, pharmaceutical and environmental samples. Compared with traditional UV absorbance detection used in CE, the LINF technique can greatly improve the concentration sensitivity of CE without the need for derivatization; the only requirement being that the analyte must have native fluorescence. Instrumentation and laser sources used in CE–LINF are summarized and specific applications of CE–LINF to small-biomolecule analysis, profiling of human biofluids, detection of native fluorescent peptides and proteins, single-cell analysis and the use of online sample preconcentration methods are also reviewed in detail.

On-line preconcentration techniques in determination of melatonin and its precursors/metabolites using micellar electrokinetic chromatography

Determination of melatonin (MT) (N-acetyl-5-methoxytryptamine) and related indole compounds using standard capillary electrophoresis (CE) system with UV detection was investigated. Satisfactory separations of six analytes i.e. l-tryptophan (l-TRP), 5-methoxyindoleacetic acid (5-MIAA), 6-hydroxymelatonin (6-HMT), MT, serotonin (SER) and 5-methoxytryptamine (5-MTRA) were performed employing micellar electrokinetic chromatography (MEKC). The optimal background electrolytes (BGE) used for separations were 20mM tetraborate buffer (pH 9.2) and 20mM phosphate buffer (pH 3.3) when employing techniques with normal and reverse migration of micelles, respectively. Fifty millimolar sodium dodecyl sulfate (SDS) was employed as the pseudostationary phase and voltage of +/-20kV was used throughout the investigation. On-line preconcentration techniques, stacking and sweeping, were applied in order to overcome high detection limits that are a serious drawback of CE with UV detection. A comparison of used techniques, concerning enhancement factors and limits of detection (LOD), is presented. Obtained results show that the use of stacking with reverse migrating micelles (SRMM) as one of preconcentration techniques allows obtaining the lowest estimated LODs for MT at the level of 30ng/mL with injection time of 99s at 0.5psi. Estimated LODs for other analytes in these conditions were, 21, 26 and 100ng/mL for l-TRP, 5-MIAA and 6-HMT, respectively. Signals of 5-MTRA and SER obtainable only with 10s injection allowed reaching estimated LODs of 62.5 and 130ng/mL, respectively. Analysis of spiked, diluted human serum was carried out as a preliminary application illustration of developed procedure.

Impact of halides on the simultaneous separation of aromatic amines and their acidic metabolites by capillary electrophoresis with laser-induced native fluorescence detection under acidic conditions

This paper describes a simple, sensitive, efficient, and rapid method for simultaneous analysis of biologically active amines and acids by capillary electrophoresis in conjunction with laser-induced native fluorescence detection (CE-LINF) using a diode pumped solid state nanolaser at 266 nm. In order to optimize resolution of the amines that were prepared in 10.0 mM formate-Tris (FT) solutions, 10.0 mM FT solutions with and without containing halides were used to fill the capillary and reservoirs, respectively. The electrophoretic mobilities of tryptamine (TA) and serotonin (5-HT) at pH 4.0 decrease with the increase in halide concentration (0-10.0 mM). Taken together with a great effect of iodide than other halides, we suggest that the formation of ion pairs is a main contributor for altering the migration of the amines. In order to simultaneously analyze the amines and their metabolites (acids) at low pH, a high bulk EOF is required. The analysis of 10 anlytes including amines and acids was completed within 12 min by CE-LINF using a capillary treated with 0.5M NaOH and then filled with 10.0 mM FT solutions (pH 4.0) containing 10.0 mM KCl prior to analysis. The limits of detection for TA and 5-hydroxyindole-3-acetic acid (5-HIAA) are 0.12 and 6.0 nM, respectively. The present method has been further validated by analyzing urine samples, with an RSD less than 3.1% (migration times) and 3.9% (concentration).

Determination of melatonin and its precursors and metabolites using capillary electrophoresis with UV and fluorometric detection

A micellar electrokinetic chromatography method has been developed for simultaneous determination of melatonin and its precursors and metabolites. A 20 mM borate buffer pH 9.5 with 50 mM SDS served as the electrolyte. Tryptophan, 5-methoxyindoleacetic acid, 6-hydroxymelatonin, melatonin, serotonin, and 5-methoxytryptamine were baseline separated in less than 13 min. The limits of detection for UV detection and fluorometric detection based on native fluorescence of analytes were at the sub-ppm level. The proposed method with UV detection was applied to melatonin content control in pharmaceutical tablets with a precision expressed as RSD (n = 7) = 1.6%. For biological samples extraction with chloroform and ethyl acetate was examined. With ethyl acetate and chloroform recoveries of 87.2% and 82.1% melatonin, respectively, were obtained from plasma samples. The recovery of melatonin from spiked urine samples was 80.0% for ethyl acetate and 82.5% for chloroform. Fluorometric detection provides about two-fold improvement over UV in the detection of melatonin and minor improvements for three other analytes, but is much poorer than UV for tryptophan and 6-hydroxymelatonin in applied conditions.

Analysis of serotonin in brain microdialysates using capillary electrophoresis and native laser-induced fluorescence detection

Serotonin or 5-hydroxytryptamine (5-HT) is a major neurotransmitter in the central nervous system. In this work, a method for analyzing 5-HT in brain microdialysis samples using a commercially available capillary electrophoresis (CE) system has been developed. A pH-mediated in-capillary preconcentration of samples was performed, and after separation by capillary zone electrophoresis, native fluorescence of 5-HT was detected by a 266 nm solid-state laser. The separation conditions for the analysis of 5-HT in standard solutions and microdialysates have been optimized, and this method has been validated on both pharmacological and analytical bases. Separation of 5-HT was performed using a 80 mmol/L citrate buffer, pH 2.5, containing 20 mmol/L hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and +30 kV voltage. The detection limit was 2.5 x 10(-10) mol/L. This method allows the in vivo brain monitoring of 5-HT using a simple, accurate CE measurement in underivatized microdialysis samples.

Separation and determination of L-tryptophan and its metabolites by capillary micellar electrokinetic chromatography with amperometric detection

A high-performance method of capillary micellar electrokinetic chromatography (CMEKC) with amperometric detection (AD), using a newly designed pre-aligned electrochemical cell, has been developed for the separation and determination of L-tryptophan (Trp) and its eight metabolites including 3-hydroxy-L-kynurenine (3-HK), 5-hydroxy-L-tryptophan (5-HTP), L-kynurenine (KN), 5-hydroxyindole-3-acetic acid (5-HIAA), xanthurenic acid (XA), indole-3-pyruvic acid (IPA), 5-hydroxytryptamine (5-HT), and tryptamine (Tryp). A carbon disk electrode was used as the working electrode and the optimal detection potential was 0.85 V (versus Ag/AgCl). At 24 kV of applied voltage, the nine compounds were completely separated, within 23 min, in a 10 mol/L Na(2)HPO(4)-NaOH buffer (pH 11.0) containing 40 mmol/L sodium dodecyl sulfate (SDS) and 3% methanol (v/v). A good linear relationship was obtained for all analytes in this paper and the detection limits of 3-HK, 5-HTP, KN, Trp, 5-HIAA, XA, IPA, 5-HT, and Tryp were 7.42, 5.18, 34.6, 3.99, 15.1, 12.7, 260, 6.72, and 8.01 nmol/L, respectively. This method has been applied to analyze the metabolism of Trp in rabbit urine.

Discontinuous electrolyte systems for improved detection of biologically active amines and acids by capillary electrophoresis with laser-induced native fluorescence detection

On-line concentration and separation of biologically active amines and acids by capillary electrophoresis (CE) in conjunction with laser-induced fluorescence using an Nd:YAG laser at 266 nm under discontinuous conditions is presented. The suitable conditions for simultaneous analysis of amines and acids were: samples were prepared in a solution (pH* 3.1) consisting of 10 mM citric acid, 89% acetonitrile (ACN), and water; a capillary was filled with 1.5 M Tris-borate (TB) buffer (pH 10.0); and the anodic vial contained PTG10 buffer (pH* 9.0) that consists of 50 mM propanoic acid, Tris, 10% glycerol, and water. After injecting a large-volume sample, amines and acids were separately stacked at the front (cathodic side) and back (anodic side) of the acidic sample zone, mainly because of changes in their electrophoretic mobilities as a result of changes in pH, viscosity, and electric field when high voltage was applied. When the sample was injected at 15 kV for 360 s, the concentration limits of detection (LODs) for 5-hydroxytryptamine (5-HT) and 5-hydroxyindole-3-acetic acid (5-HIAA) were 0.27 and 0.31 nM, respectively, which are about 400- and 800-fold sensitivity improvements when compared to those injected at 1 kV for 10 s. For the analysis of amines, samples were prepared in 100 mM citric acid (pH* 1.8) containing 89% ACN and both the capillary and anodic vial were filled with 400 mM PTG20 (propanoic acid, Tris, 20% glycerol, and water) at pH* 4.5. Using a large injection volume (15 kV for 360 s), we achieved concentration LODs of 17 pM and 0.3 nM for tryptamine and epinephrine, which are about 5200- and 14,000-fold sensitivity improvements, respectively, in comparison with those injected at 1 kV for 10 s. The features of simplicity (no sample pretreatment), rapidity (12 min), and sensitivity for identification of amines and acids of interest in urine samples show diagnostic potential of the two approaches developed in this study.

Optimizing separation conditions for riboflavin, flavin mononucleotide and flavin adenine dinucleotide in capillary zone electrophoresis with laser-induced fluorescence detection

A method was developed for the quantitative determination of riboflavin, flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD), using free solution capillary zone electrophoresis in uncoated fused-silica capillaries with laser-induced fluorescence (LIF) detection. Various factors influencing the separation and detection of flavin vitamers were investigated, including pH (5.5-10.5), concentration and nature of the run buffer (phosphate, borate and carbonate), applied voltage (15-30 kV), temperature (15-30 degrees C) and injection time. Optimal resolution and detection were obtained with a pH 9.8, 30 mM aqueous phosphate buffer at 15 degrees C and 30 kV of applied voltage. LIF detection was obtained with a He-Cd laser source using an excitation wavelength at 442 nm and lambda(em) > or = 515 nm. Riboflavin could be determined in the concentration ranges 0.5-350 microg/l with a rather low detection limit (LOD) down to 50 amol. The LODs of FAD and FMN were slightly higher, 300 and 350 amol, respectively. Combined with a simple clean-up procedure, the practical utility of this method is illustrated by the measurements of flavin derivates in foods and beverages, such as wines, milk, yoghurt and raw eggs.

Analysis of thiocyanate in biological fluids by capillary zone electrophoresis

A new sensitive and simple method has been developed for the determination of thiocyanate in human serum, urine and saliva. The determinations were performed in a fused-silica capillary [64.5 cm (56 cm effective length) x 75 microm] using 0.1 M beta-alanine-HCl (pH 3.50) as a background electrolyte, separation voltage 18 kV (negative polarity), temperature of capillary 25 degrees C and direct detection at 200 nm. Serum samples were 10-times diluted with deionised water and deproteinised with acetonitrile in the ratio 1:2. Urine and saliva samples need only 20-fold dilution with deionised water. The proposed method was successfully applied to the determination of thiocyanate in various human serum, saliva and urine samples.

Solid-state UV laser-induced fluorescence detection in capillary electrophoresis

Two solid-state UV lasers were applied to the laser-induced fluorescence (LIF) detection of various groups of compounds after separation by capillary electrophoresis. These lasers are thermoelectric-cooled, highly compact, and inexpensive. Such lasers provide few mW of quasi-continuous wave (CW) power which are sufficient and stable for LIF detection. Native fluorescence detection of tryptophan-containing proteins and peptides and related indoles was achieved at the nM level with the laser operating at 266 nm. Detection of fluorescamine-labeled amino acids and peptides was also possible at the nM level with the laser operating at 355 nm. Amino acids at a concentration as low as 10 ng/mL could be labeled with fluorescamine. Solid-state UV-LIF detection of the tryptic digest of cytochrome c after fluorescamine derivatization was demonstrated.

Proceedings of the 10th Annual Frederick Conference on Capillary Electrophoresis. Frederick, Maryland, USA. October 18-20, 1999

Since the introduction of the first commercial capillary electrophoresis (CE) instrument a decade ago, CE applications have become widespread. Today, CE is a versatile analytical technique which is successfully used for the separation of small ions, neutral molecules, and large biomolecules and for the study of physicochemical parameters. It is being utilized in widely different fields, such as analytical chemistry, forensic chemistry, clinical chemistry, organic chemistry, natural products, pharmaceutical industry, chiral separations, molecular biology, and others. It is not only used as a separation technique but to answer physicochemical questions. In this review, we will discuss different modes of CE such as capillary zone electrophoresis, micellar electrokinetic chromatography, capillary gel electrophoresis, capillary isoelectric focusing, and capillary electrochromatography, and will comment on the future direction of CE, including array capillary electrophoresis and array microchip separations.

Advances in the analysis of tryptophan and its related compounds by chromatography

Advances in the analysis of tryptophan,--(both in its free form and bound, alone or together with its metabolites),--has been compiled on the basis of the relevant papers published in the last 4-5 years, including author's experiences associated with the preparation of derivatives and with any of those conditions arising from the analytical procedure itself. The special requirements of various, tryptophan containing matrices were also taken into consideration (biological tissues or fluids, food and feed stuffs, etc). For the sake of completeness in addition to the most common HPLC/UV/F1 techniques, HPLC/MS, GC/MS, CE/UV/F1 and spectrophotometry will be also discussed.

Drug analysis by capillary electrophoresis and laser-induced fluorescence

This review briefly presents the different laser-induced fluorescence detectors, outlines the different dyes used to derivatize molecules which are used with capillary electrophoresis/laser-induced fluorescence (CE-LIF), and provides an overview and current status of CE-LIF in drug analysis.

Capillary electrophoresis with laser-induced native fluorescence detection for profiling body fluids

Laser-induced native fluorescence detection with a KrF excimer laser (lambda=248 nm) was used to investigate the capillary electrophoretic (CE) profiles of human urine, saliva and serum without the need for sample derivatization. All separations were carried out in sodium phosphate and/or sodium tetraborate buffers at alkaline pH in a 50-microm I.D. capillary. Sodium dodecyl sulfate was added to the buffer for micellar electrokinetic chromatography (MEKC) analysis of human urine. Although inherently a pulsed source, the KrF excimer laser was operated at a high pulse repetition rate of 553, 1001 or 2009 Hz to simulate a continuous wave excitation source. Detection limits were found to vary with pulse rate, as expected, in proportion to average excitation power. The following detection limits (3sigma) were determined in free solution CE: tryptophan, 4 nM; conalbumin, 10 nM; alpha-lactalbumin, 30 nM. Detection limits for indole-based compounds and catecholamine urinary metabolites under MEKC separation conditions were in the range 7-170 nM.

Critical review of recent developments in fluorescence detection for capillary electrophoresis

Recent developments in capillary electrophoresis with fluorescence detection are reviewed. Instrumental advances have led to increased sensitivity and, therefore, a growing number of applications. Capillary electrophoresis has been coupled with various techniques to achieve multi-dimensional separations. Other advances have focused on temporal resolution when sampling from biological environments, increased sample throughput especially for DNA analysis, and fast separation times. New technologies including chip and channel electrophoretic separations with fluorescence detection are also discussed.

Analysis of small molecules for clinical diagnosis by capillary electrophoresis

The application of capillary electrophoresis (CE) for the analysis of small molecules in clinical research is growing steadily. Initial studies have dealt with separations of standards or compounds in clean matrices. However, later studies dealt with analysis of those compounds in serum, urine or tissues. Great progress has been accomplished in three areas of clinical interest: organic acids, amino acids and drug analysis. The analysis of these compounds by capillary electrophoresis has several distinct advantages: high resolution, simplicity, versatility and especially low operating costs. In many cases, the sample can be injected directly without complex pretreatment. Most of the described methods have been validated for their precision, linearity and accuracy. In forensic toxicology, the CE has been used for drug identification and as a complementary analytical method.