Proteins at liquid interfaces

Relationship between the interfacial properties of lactoferrin-(-)-epigallocatechin-3-gallate covalent complex and the macroscopic properties of emulsions

This study explored the relationship between the interfacial behavior of lactoferrin-(-)-epigallocatechin-3-gallate covalent complex (LF-EGCG) and the stability of high internal phase Pickering emulsions (HIPPEs). The formation of covalent bond between lactoferrin and polyphenol was verified by the increase in molecular weight. In LF-EGCG group, the surface hydrophobicity, interfacial pressure, and adsorption rate were decreased, while the molecular flexibility, interfacial film viscoelasticity, and interfacial protein content were increased. Meanwhile, LF-EGCG HIPPE possessed reduced droplet size, increased ζ-potential and stability. Rheology showed the viscoelasticity, structural recovery and gel strength of LF-EGCG HIPPE were improved, giving HIPPE inks better 3D printing integrity and clarity. Moreover, the free fatty acids (FFA) release of LF-EGCG HIPPE (62.6%) was higher than that of the oil group (50.1%). Therefore, covalent treatment effectively improved the interfacial properties of protein particles and the stability of HIPPEs. The macroscopic properties of HIPPEs were positively regulated by the interfacial properties of protein particles. The result suggested that the stability of emulsions can be improved by regulating the interfacial properties of particles.

Interfacial engineering of Pickering emulsions stabilized by pea protein-alginate microgels for encapsulation of hydrophobic bioactives

This study aims to investigate the effects of interfacial layer composition and structure on the formation, physicochemical properties and stability of Pickering emulsions. Interfacial layers were formed using pea protein isolate (PPI), PPI microgel particles (PPIMP), a mixture of PPIMP and sodium alginate (PPIMP-SA), or PPIMP-SA conjugate. The encapsulation and protective effects on different hydrophobic bioactives were then evaluated within these Pickering emulsions. The results demonstrated that the PPIMP-SA conjugate formed thick and robust interfacial layers around the oil droplet surfaces, which increased the resistance of the emulsion to coalescence, creaming, and environmental stresses, including heating, light exposure, and freezing-thawing cycle. Additionally, the emulsion stabilized by the PPIMP-SA conjugate significantly improved the photothermal stability of hydrophobic bioactives, retaining a higher percentage of their original content compared to those in non-encapsulated forms. Overall, the novel protein microgels and the conjugate developed in this study have great potential for improving the physicochemical stability of emulsified foods.

Effect of cross-linking density on the rheological behavior of ultra-soft chitosan microgels at the oil-water interface

In this paper, microgels with uniform particle size were prepared by physically cross-linking the hydrophobically modified chitosan (h-CS) with sodium phytate (SP). The effects of cross-linking density on the interfacial adsorption kinetics, viscoelasticity, stress relaxation, and micorheological properties of the hydrophobically modified chitosan microgels (h-CSMs) at the oil-water interface were extensively investigated by the dilatational rheology, compressional rheology, and particle tracing microrheology. The results were correlated with the particle size, morphology, and elasticity of the microgels characterized by dynamic light scattering and atomic force microscopy. It was found that with the increase of cross-linking density, the h-CSMs changed from a polymer-like state to ultra-soft fussy spheres with higher elastic modulus. The compression isotherms demonstrated multi-stage increase caused by the interaction between the shells and that between the cores of the microgels successively. As the increase of cross-linking density, the h-CSMs diffused slower to the oil-water interface, but demonstrating faster permeation adsorption and rearrangement at the oil-water interface, finally forming interfacial layers of higher viscoelastic modulus due to the core-core interaction. Both the initial tension relaxation and the microgel rearrangement after interface expansion became faster as the microgel elasticity increased. The interfacial microrheology demonstrated dynamic caging effect caused by neighboring microgels. This article provides a more comprehensive understanding of the behaviors of polysaccharide microgels at the oil-water interface.

l-Arginine and l-lysine improve the emulsifying and dissolution properties of pale, soft, exudative-like chicken myofibrillar proteins by modifying their conformations

Herein, we investigated the effect and potential mechanisms of l-arginine (Arg) and l-lysine (Lys) on the emulsifying and dissolution properties of pale, soft, exudative (PSE)-like chicken myofibrillar proteins (MPs). The findings revealed that Arg/Lys effectively enhanced the emulsion activity and emulsion stability indexes of PSE-like MPs, resulting in smaller and more uniform PSE-like MP-soybean oil emulsions. Arg/Lys increased the solubility, absolute potential, hydrophobicity, fluorescence intensity, and β-sheet content and decreased the turbidity, particle size, and β-turn and random coil content of PSE-like MPs. Additionally, Arg/Lys did not significantly affect the Schiff base, carbonyl group, and total sulfhydryl contents, but caused a red shift of the band near 299 nm, indicating conformational rather than primary structural changes. Altogether, these findings indicate that Arg/Lys improves the emulsifying and dissolution performances of PSE-like MPs by adjusting conformation and contributes to a better understanding of how Arg/Lys enhances the physicochemical properties of PSE-like sausages.

Synergistic effect of gellan gum and guar gum on improving the foaming properties of soy protein isolate-based complexes: Interaction mechanism and interfacial behavior

Interactions among multi-component play a critical role in modulating the foaming properties of aerated foods. This study evaluated the mechanisms of synergistic improvement of gellan gum (GEG) and guar gum (GUG) on the foaming properties of soy protein isolate (SPI)-based complex. The results showed that the GEG/GUG ratio was closely related to the intermolecular interactions of SPI-based ternary complex and the dynamical changing of its foaming properties. The SPI/GEG/GUG ternary complex with a GEG/GUG ratio of 2/3 exhibited the highest foamability (195 %) and comparable foam stability (99.17 %), which were 32.95 % and 2.99 % higher than that of SPI/GEG binary complex. At this ratio, GUG promoted the interactions between SPI and GEG, and bound to complex's surface through hydrogen bonding, resulting in the increase of particle size and surface charge, and the decrease of surface hydrophobicity. Although this reduced the diffusion of complex onto the air/water interface, it increased permeation rate and molecular rearrangement behavior, which were the potential mechanisms to improve the foaming properties. Additionally, the synergistic effect of GEG and GUG also enhanced the elastic strength and solid characteristics of foam systems. This study provided a theoretical guidance for the targeted modulation of foaming properties of multi-component aerated foods.

Influences of different ultrasonic treatment intensities on the molecular chain conformation and interfacial behavior of sugar beet pectin

In this study, the effects of different ultrasonic treatment intensities (57, 170, and 283 W/cm2) on the chemical composition, molecular chain characteristics, crystal structure, micromorphology, interfacial adsorption behavior and emulsifying properties of sugar beet pectin (SBP) were investigated. Ultrasonic treatment did not change the types of SBP monosaccharides, but it had impacts on their various monosaccharide contents. Moreover, the feruloylated, acetyl, and methoxy groups of SBP also undergo varying degrees of changes. The increase in ultrasonic treatment intensity led to transition in the molecular chain conformation of SBP from rigid semi-flexible chains to flexible chains, accompanied by modification in its crystal structure. Microstructural analysis of SBP confirmed the significant change in molecular chain conformation. Modified SBP could form an elastic interfacial film with higher deformation resistance on the oil-water interface. The SBP sample modified with 170 W/cm2 exhibited better emulsifying properties owing to its better interfacial adsorption behavior. Moreover, the emulsions prepared with modified SBP exhibited better stability capability under different environmental stresses (pH value, salt ion concentration, heating temperature and freeze-thaw treatment). The results revealed that the ultrasonic technology is useful to improve the emulsifying properties of SBP.

Understanding the foam stability mechanisms of complex formed by soy protein isolate and different charged polysaccharides: Air/water interfacial behavior and rheological characteristics

This study evaluated the foaming properties, the dynamic adsorption behavior at the air/water (A/W) interface and the foam rheological characteristics of complexes formed by soy protein isolate (SPI) and different charged polysaccharides, including chitosan (CS), guar gum (GUG) and gellan gum (GEG). The results showed that the SPI/CS10 had the highest initial foam volume (26.67 mL), which were 3.89 %, 100.08 % and 70.19 % higher than that of single SPI, SPI/GUG and SPI/GEG complexes, respectively. Moreover, three charged polysaccharides could all significantly improve the foam stability of complexes. Among them, foams stabilized by SPI/GEG10 were the most stable that the foam volume slightly changed (approximately 1 mL) and no drainage occurred throughout the whole recording process. The interfacial behavior analysis showed that SPI/CS10 had higher diffusion (Kdiff) and rearrangement rate (KR) but lower penetration rate (KP) at the A/W interface compared with single SPI, while SPI/GUG10 and all SPI/GEG complexes showed higher KR and KP but lower Kdiff. In addition, SPI/CS10 was beneficial to concurrently enhance the elastic strength and solid-like behavior of foam system, while all SPI/GEG complexes could improve the elastic strength of foam system but was not conducive to the solid-like behavior.

The impact of an ultrasonic standing wave on the sorption behavior of proteins: Investigation of the role of acoustically induced non-spherical bubble oscillations

HYPOTHESIS

Protein molecules adsorb on the air/liquid interface due to possessing a hydrophobic side. A full surface coverage is important in many processes such as in protein harvesting by foam fractionation. The adsorption of proteins in low concentration solutions is preceded by a relatively long time lag known as the induction period. This has been attributed to the formation of an adsorbed monolayer, which relies on the reorientation of the protein molecules. The reduction of the induction period can significantly facilitate the sorption process to reach full protein coverage. For this purpose acoustically induced non-spherical bubble oscillations can aid in the formation of the monolayer and enhance the sorption process.

EXPERIMENT

In this study, low frequency ultrasound was used to induce non-spherical oscillations on an air bubble attached to a capillary. Profile analysis tensiometry was deployed to examine the effect of these non-spherical oscillations on the sorption dynamics of different proteins.

FINDINGS

We observed that during the initial stages of adsorption, when the bubble surface is almost empty, non-spherical oscillations occur, which were found to significantly expedite the adsorption process. However, during later stages of the adsorption process, despite the continued presence of several sonication phenomena such as the primary radiation force and acoustic streaming, no change in adsorption behavior of the proteins could be noted. The occurrence, duration, and intensity of the non-spherical bubble oscillations appeared to be the sole contributing factors for the change of the sorption dynamics of proteins.

Interactions between humulinone derived from aged hops and protein Z enhance the foamability and foam stability

Foam is one of the important characteristics of beer, including foamability, foam stability and foam texture. Protein Z (PZ) is considered to be an important component of beer foam. In this study, the interaction between PZ and humulinone, a widespread compound in aged hops, and the effect on foam properties of PZ were investigated. The fluorescence spectra showed that the stoichiometric ratio of humulinone to PZ was 4.25 ± 0.48: 1, and the binding constant was (1.64 ± 0.17) × 105 M-1. MD and FTIR results showed that the main force of interaction between PZ and humulinone was hydrogen bond, and the possible sites were Asn-37, Ser-292, Lys-290 and Pro-395. Moreover, the addition of humulinone greatly reduced the surface tension of PZ solution, and changed the secondary structure of PZ, which is beneficial for the foam stability. Under the influence of humulinone, the foamability, foam stability and foam texture of PZ all increased.

Interfacial assembly and rheology of multi-responsive glycyrrhizic acid at liquid interfaces

Glycyrrhizic acid (GA), a naturally derived food-grade saponin molecule, is a promising alternative to synthetic surfactants for stabilizing multiphase systems including emulsions and foams, due to its biological activity and surface-active properties. Understanding the interfacial behavior of GA, particularly in relation to its complex self-assembly behaviors in water induced by multiple environmental stimuli, is crucial to its application in multiphase systems. In this study, we comprehensively investigate the interfacial structure and rheological properties of GA systems, as a function of pH and temperature, through Langmuir-Blodgett films combined with atomic force microscopy, interfacial particle tracking, adsorption kinetics, stress-relaxation behavior and interfacial dilatational rheology. The variation of solution pH provokes pronounced changes in the interfacial properties of GA. At pH 2 and 4, GA fibril aggregates/fibrils adsorb rapidly, followed by rearrangement into large lamellar and rod-like structures, forming a loose and heterogeneous fibrous network at the interface, which exhibit a stretchable gel-like behavior. In contrast, GA at pH 6 and 8, featuring micelles or monomers in solutions, adsorb slowly to the interface and re-assemble partially into small micelle-like or irregular structures, which lead to a dense and homogeneous interfacial layer with stiffer glassy-like responses. With successively elevated temperature, the GA structures (pH 4) at the interface break into smaller fragments and further adsorption is promoted. Upon cooling, the interfacial tension of GA further decreases and a highly elastic interfacial layer may be formed. The diverse GA assemblies in bulk solution impart them with rich and intriguing interfacial behaviors, which may provide valuable mechanistic insights for the development of novel edible soft matter stabilized by GA.

Comparative study of interfacial properties and thermal behaviour of milk fat globules and membrane prepared from ultrasonicated bovine milk

Milk fat globules or milk fat globule membranes (MFGs/MFGM) have been added to the infant formula to fortify the phospholipids and narrow the nutritional gap from breast milk. The main aim of this study was to profile the interfacial and thermal properties of MFGs/MFGM prepared from ultrasonicated bovine milk. Bovine milk was sonicated at ultrasonic intensities of 20 kHz and 40 kHz independently or synchronously with the duration time of 0 min (control), 5 min, 10 min, and 15 min (work/rest cycles = 5 s: 3 s). Ultrasonic treatments at 20 kHz/ 5 min and 20 + 40 kHz/ 5 min improved the volume density (%) of smaller particles (1-10 µm) while significantly decreasing the surface hydrophobicity (H0) (p < 0.05). 40 kHz/5 min samples showed significantly higher ζ- potential than the other samples (p < 0.05), which might be because more negative charges were detected. In comparison with control samples, ultrasonic treatments decreased the interfacial tension (π) between the air and MFGs/MFGM liquid phase. 20 kHz ultra-sonicated treatments decreased the diffusion rate (k diff) of MFGs/MFGM interfacial compositions significantly as the duration prolonged from 5 min to 15 min (p < 0.05) but did not affect the adsorption or penetration rate (k a) (p > 0.05). X-ray diffraction (XRD) results showed that α-crystal peaks only existed in control and ultrasonicated 5 min samples but disappeared in all 15 min samples. According to the different scanning calorimetry (DSC), one or two new exothermic events (in the range of 17.29 - 18.81 ℃ and 22.14 - 25.21 ℃) appeared after ultrasonic treatments, which, however, were not found in control samples. Ultrasonic treatments resulted in the low-melting fractions (LMF) (TM1) peaks undetectable in MFGs/MFGM samples in which only peaks of medium-melting fractions (MMF) (TM2) and high-melting fractions (HMF) (TM3) were detected. Compared with the control, both enthalpies of crystallisation (ΔHC) and melting (ΔHM) decreased in ultrasonicated samples. In conclusion, ultrasonic treatment affects the interfacial and thermal properties of MFGs/MFGM.

Effects of protein concentration, ionic strength, and heat treatment on the interfacial and emulsifying properties of coconut (Cocos nucifera L.) globulins

This research aimed to investigate the effects of protein concentration (0.2 %-1.0 %), ionic strength (100-500 mM NaCl), and heat treatment (temperature: 80 and 90℃; time: 15 and 30 min) on the interfacial and emulsifying properties of coconut globulins (CG). When protein concentration was set at 0.2-0.6 %, the interfacial adsorption increased with the increasing of protein concentration. However, the lowest interfacial viscoelasticity was found when CG concentration was 0.6 %. When the protein concentration was higher than 0.6 %, the dilatational viscoelasticity increased with the increasing of protein concentration. The protein concentration showed positive effect on the emulsion stability of CG. The ionic strength showed positive effect on the interfacial adsorption but negative effects on the interfacial viscoelasticity and emulsion stability. Higher temperature and longer heating time brought worse interface behavior. The heated CG (90℃, 30 min) had the worst interfacial behavior but the best emulsion stability.

Aggregate Size Modulates the Oil/Water Interfacial Behavior of Myofibrillar Proteins: Toward the Thicker Interface Film and Disulfide Bond

Myofibrillar protein (MP) aggregate models have been established to elucidate the correlation between their aggregate sizes and interfacial properties. The interfacial layer thickness was measured by the polystyrene latex method and quartz crystal microbalance with dissipation measurement. Interfacial conformations were then characterized in situ (front-surface fluorescence spectroscopy) and ex situ (reactive sulfhydryl group and secondary structure measurement following MP displacement). The viscoelasticity of the interfacial film and its resistance to surfactant-induced competitive displacement were reflected by the dilatational rheology and dynamic interfacial tension with the bulk phase exchange. Finally, we compared the findings of competitive displacement before/after adding a sulfhydryl-blocking agent, N-ethylmaleimide, to highlight the role of S-S linkage on interfacial film formation and stability. We substantiated that the aggregate size of the MP governed their interfacial properties. Small-sized aggregates exhibited more ordered secondary structures on the oil-water interface, which was conducive to the adsorption ratio of the protein and the adsorption dynamics. Although larger aggregates lowered the diffusion rate during interfacial film formation, they allowed the thicker and more viscoelastic interfacial film to be constructed afterward through more disulfide bond formation, resulting in greater resistance to surfactant-induced competitive displacement.

Enhanced stabilization of oil-in-water (O/W) emulsions by fibrillar gel particles from lentil proteins

Pulse proteins as a sustainable protein source have attracted increasing interest in food development, but pulse proteins are generally less surface active than dairy proteins. This work introduces lentil protein (LP)-based fibrillar gel particles (FGPs) fabricated from heat-induced LP fibrillar aggregates by 1, 4, 8, and 16 h of heating, followed by particle reduction using sonication. The heating time significantly impacts the FGPs particle size and surface hydrophobicity. The FGP prepared by 4 h of heating (FGP-4) showed a small size (<200 nm) and homogeneous size distribution while possessing significantly increased surface hydrophobicity compared to untreated LP. Such structural features made FGP-4 better adsorb at the O/W interface and then completely covered the oil droplet surface, leading to homogeneous emulsions of small size (22.33 μm) and superior long-term stability without creaming for 30 days. In addition, the dispersed FGP in the bulk phase could develop interactions among each other, leading to improved emulsion viscosity and texture without oil droplet size change. This finding suggests that constructing fibril-type gel particles can provide a new strategy for forming superior O/W emulsions with improved stability from plant proteins.

The Effect of High Pressure Homogenization on the Structure of Dual-Protein and Its Emulsion Functional Properties

It has been proven that high-pressure homogenization (HPH) could improve the functional properties of proteins by modifying their structure. This study researched the effect of HPH on the structural and functional properties of whey-soy dual-protein (Soy Protein Isolation-Whey Protein Isolation, SPI-WPI). Different protein solution samples were treated with HPH at 30, 60, 90, 120 and 150 MPa, and the structure changed under different pressures was analyzed by measuring particle size, zeta potential, Fourier infrared spectrum (FTIR), fluorescence spectrum and scanning electron microscope (SEM). The results showed that HPH significantly reduced the particle size of SPI-WPI, changed the secondary and tertiary structures and improved the hydrophobic interaction between molecules. In addition, HPH significantly improved the solubility and emulsification of all proteins, and the improvement effect on SPI-WPI was significantly better than SPI and WPI. It was found that SPI-WPI treated with 60 MPa had the best physicochemical properties. Secondly, we researched the effect of HPH by 60 MPa on the emulsion properties of SPI-WPI. In this study, the SPI-WPI had the lowest surface tension compared to a single protein after HPH treatment. The emulsion droplet size was obviously decreased, and the elastic properties and physical stability of SPI-WPI emulsion were significantly enhanced. In conclusion, this study will provide a theoretical basis for the application of HPH in modifying the structure of dual-protein to improve its development and utilization in liquid specialty food.

Targeting Interfacial Location of Phenolic Antioxidants in Emulsions: Strategies and Benefits

It is important to have larger proportions of health-beneficial polyunsaturated lipids in foods, but these nutrients are particularly sensitive to oxidation, and dedicated strategies must be developed to prevent this deleterious reaction. In food oil-in-water emulsions, the oil-water interface is a crucial area when it comes to the initiation of lipid oxidation. Unfortunately, most available natural antioxidants, such as phenolic antioxidants, do not spontaneously position at this specific locus. Achieving such a strategic positioning has therefore been an active research area, and various routes have been proposed: lipophilizing phenolic acids to confer them with an amphiphilic character; functionalizing biopolymer emulsifiers through covalent or noncovalent interactions with phenolics; or loading Pickering particles with natural phenolic compounds to yield interfacial antioxidant reservoirs. We herein review the principles and efficiency of these approaches to counteract lipid oxidation in emulsions as well as their advantages and limitations.

Impact of Cavitation Jet on the Structural, Emulsifying Features and Interfacial Features of Soluble Soybean Protein Oxidized Aggregates

A cavitation jet can enhance food proteins' functionalities by regulating solvable oxidized soybean protein accumulates (SOSPI). We investigated the impacts of cavitation jet treatment on the emulsifying, structural and interfacial features of soluble soybean protein oxidation accumulate. Findings have shown that radicals in an oxidative environment not only induce proteins to form insoluble oxidative aggregates with a large particle size and high molecular weight, but also attack the protein side chains to form soluble small molecular weight protein aggregates. Emulsion prepared by SOSPI shows worse interface properties than OSPI. A cavitation jet at a short treating time (<6 min) has been shown to break the core aggregation skeleton of soybean protein insoluble aggregates, and insoluble aggregates into soluble aggregates resulting in an increase of emulsion activity (EAI) and constancy (ESI), and a decrease of interfacial tension from 25.15 to 20.19 mN/m. However, a cavitation jet at a long treating time (>6 min) would cause soluble oxidized aggregates to reaggregate through an anti-parallel intermolecular β-sheet, which resulted in lower EAI and ESI, and a higher interfacial tension (22.44 mN/m). The results showed that suitable cavitation jet treatment could adjust the structural and functional features of SOSPI by targeted regulated transformation between the soluble and insoluble components.

Physical stability, microstructure and interfacial properties of solid-oil-in-water (S/O/W) emulsions stabilized by sodium caseinate/xanthan gum complexes

Calcium carbonate (CaCO₃) has poor suspension stability, which severely limits its application in food processing and products. In this study, sodium caseinate (NaCas) and sodium caseinate (NaCas)-xanthan gum (XG) mixtures were compared for the stable preparation of solid/oil/water (S/O/W) emulsions for the delivery of calcium carbonate (CaCO₃) to solve the problem of poor suspension stability. The physical stability, particle size distribution, and microstructure of S/O/W emulsions were investigated to prove the successful construction of the system. The dynamic surface pressure and surface swelling properties of 2.0 wt% NaCas with different concentrations of XG were investigated to clarify the effect of interfacial properties of NaCas-XG mixtures on the emulsion stability of S/O/W emulsions. The results showed that the addition of XG resulted in enhanced physical stability, reduced particle size distribution, and enhanced encapsulation effect of the emulsion, forming a more three-dimensional core-shell structure via dendritic links. XG had a significant effect on the dynamic properties of the NaCas adsorption membrane: NaCas interacted with XG and the diffusion (k_diff) of NaCas to the interface decreased in short adsorption time, thus limiting the protein adsorption effectiveness; the presence of XG reduced the penetration (k_P) and rearrangement (k_R) rates at the interface during long adsorption times. Meanwhile, the NaCas-XG mixture has a high swelling elasticity. The results of this study can be used to improve the quality of related emulsion products or to prepare delivery systems for bioactive compounds.

The Improvement of Dispersion Stability and Bioaccessibility of Calcium Carbonate by Solid/Oil/Water (S/O/W) Emulsion

Solid/oil/water (S/O/W) emulsion loaded with calcium carbonate (CaCO₃) was constructed to raise the dispersion stability and bioaccessibility. In the presence or absence of sodium caseinate (NaCas), the particle size, Zeta-potential, physical stability, and apparent viscosity of stabilized S/O/W emulsions with different gelatin (GEL) concentrations (0.1~8.0 wt%) were compared. Combined with a confocal laser scanning microscope (CLSM), cryoscanning electron microscope (Cryo-SEM), and interfacial adsorption characteristics, the stabilization mechanism was analyzed. The bioavailability of CaCO₃ was investigated in a simulated gastrointestinal tract (GIT) model. The S/O/W-emulsion droplets prepared by the NaCas-GEL composite have a smaller particle size, higher Zeta-potential, larger apparent viscosity, and better physical stability compared with GEL as a single emulsifier. CLSM results confirmed that CaCO₃ powder was encapsulated in emulsion droplets. The Cryo-SEM results and interfacial adsorption characteristics analysis indicated that the NaCas-GEL binary composite could effectively reduce the interfacial tension, and the droplets form a denser three-dimensional network space structure with a shell-core structure which enhanced the stability of the system. GIT studies showed that the droplets presented higher CaCO₃ bioaccessibility than the CaCO₃ powder. This study enriched the theory of the S/O/W transfer system and provided theoretical support for the development of CaCO₃ application in liquid food.

Nonlinear dilatational rheology of different protein aggregates at the oil-water interface

Proteins tend to self-assemble into different morphological aggregates such as nanoparticles or fibrils during heat treatment depending on the processing conditions. The protein aggregates exhibit excellent interfacial activity and even better ability to stabilize emulsions than native proteins. The interfacial rheological properties at the oil-water interface play a very important role in emulsion stability, among which the interfacial nonlinear rheology is closely related to their ability to resist large perturbation. However, there are very few studies reporting the nonlinear interfacial rheological behavior of protein aggregates at the oil-water interface. In this study, β-lactoglobulin fibrous aggregates (F) and nanoparticle aggregates (NP) were prepared, and the adsorption kinetics and dilatational nonlinear rheological behavior of β-lactoglobulin aggregates at the oil-water interface under large amplitude deformation were studied using a pendant drop tensiometer, and compared with those of native proteins. From the adsorption experiments, the adsorption of protein aggregates, especially fibrils, was faster than that of native proteins in the early stage, while in the late stage, the native proteins displayed a significantly higher degree of rearrangement than the fibrils. The surface hydrophobicity and the short fibrils present mainly determine the properties of the fibril interface, while the behavior of the nanoparticle interface was significantly influenced by the size and charge properties of the nanoparticles. From the dilatational experiment, the Lissajous plots revealed that the F interface at all pHs evaluated and the βlg interface at pH 5.8 displayed strain softening in both expansion and compression processes, while the NP interface at all pHs and βlg interface at pH 2 and pH 7 displayed strain softening in expansion and strain hardening in compression processes. The nonlinear response of the protein aggregates at the oil-water interface was more obvious at pH 5.8. The modulus change from frequency sweeps revealed that the fibril interface was strong but not very structured in contrast to that formed by the native proteins which displays high structuration although weak in strength, whereas the strength of the interface formed by protein nanoparticles is in between, but more sensitive to the surface charge.

Interfacial rheology of sodium caseinate/high acyl gellan gum complexes: Stabilizing oil-in-water emulsions

In this work, the effects of pH and high acyl gellan gum concentration on the adsorption kinetics and interfacial dilatational rheology of sodium caseinate/high acyl gellan gum (CN/HG) complexes were investigated using a pendant drop tensiometer. In addition, stability related properties including interfacial protein concentration, droplet charge, size, microstructure and creaming index of emulsions were studied at different HG concentration (0–0.2 wt%) and pH values (4, 5.5 and 7). The results showed that HG adsorbed onto the CN mainly through electrostatic interactions which could lead to increase the interfacial pressure (π), rates of protein diffusion (k_diff), and molecular penetration (k_p). The CN/HG complexes formed thick adsorption layers around the oil droplets which significantly increased the surface dilatational modulus with the increasing HG concentration. The CN/HG complexes appeared to form more elastic interfacial films after a long-term adsorption time compared with CN alone, which could reduce the droplet coalescence and thus prevented the growth of emulsion droplets. All four phosphorylated proteins of CN (α_s1-, α_s2-, β-, and κ-casein) were adsorbed at the oil-water (O/W) interface as confirmed by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE), and surface protein coverage increased progressively with increasing HG concentration at pH 5.5, but decreased at pH 7. The CN/HG stabilized emulsions at pH 5.5 revealed the higher net charges and smaller z-average diameters than those at pH 4 and pH 7. This study provides valuable information on the use of CN/HG complexes to improve the stability and texture of food emulsions.

•Interactions between sodium caseinate (CN) and high acyl gellan gum (HG) studied.

•At pH 5.5, CN/HG interaction was mainly driven by electrostatic attractions.

•CN/HG complex improved the adsorption of CN at the oil-water interface.

•CN/HG complex could form stronger interfacial films than protein alone.

•Cooperative adsorption onto oil-water interface improved emulsion stability.

Interfacial properties of milk proteins: A review

The interfacial properties of dairy proteins are of great interest to the food industry. Food manufacturing involves various environmental conditions and multiple processes that significantly alter the structure and colloidal stability of food materials. The effects of concentration, pH, heat treatment, addition of salts etc., have considerable influence on the surface activity of proteins and the mechanical properties of the interfacial protein films. Studies to date have established some understanding of the links between environmental and processing related parameters and their impacts on interfacial behavior. Improvement in knowledge may allow better design of interfacial protein structures for different food applications. This review examines the effects of environmental and processing conditions on the interfacial properties of dairy proteins with emphasis on interfacial tension dynamics, dilatational and surface shear rheological properties. The most commonly used surface analytical techniques along with relevant methods are also addressed.

Influence of Emulsifiers and Dairy Ingredients on Manufacturing, Microstructure, and Physical Properties of Butter

The influence of emulsifiers and dairy solids on churning and physical attributes of butter was investigated. Commercial dairy cream was blended with each of the ingredients (0.5%, w/w) separately, aged overnight (10 °C), and churned (10 °C) into butter. The employed additives showed a distinctive impact on the macroscopic properties of butter without largely affecting the melting behavior. In fresh butter, polyglycerol polyricinoleate (PGPR) emulsifier having dominated hydrophobic moieties significantly (p < 0.05) enhanced the softness. Among dairy solids, sodium caseinate (SC) was the most effective in reducing the solid fat fraction, hardness, and elastic modulus (G'), while whey protein isolate (WPI) and whole milk powder (WMP) produced significantly harder, stiffer, and more adhesive butter texture. As per tribological analysis, PGPR, Tween 80, and SC lowered the friction-coefficient of butter, indicating an improved lubrication property of the microstructure. The extent of butter-setting during 28 days of storage (5 °C) varied among the samples, and in specific, appeared to be delayed in presence of WPI, WMP, and buttermilk solids. The findings of the study highlighted the potential of using applied emulsifiers and dairy-derived ingredients in modifying the physical functionality of butter and butter-like churned emulsions in addition to a conventional cream-ageing process.

Adsorption time scales of cluster-forming systems

A microscopic model of adsorption in cluster forming systems with competing interaction is considered. The adsorption process is described by the master equation and modelled by a kinetic Monte Carlo method. The evolution of the particle concentration and interaction energy during the adsorption of particles on a plane triangular lattice is investigated. The simulation results show a diverse behavior of the system time evolution depending on the temperature and chemical potential and finally on the formation of clusters in the system. The characteristic relaxation times of adsorption vary in several orders of magnitude depending on the thermodynamic parameters of the final equilibrium state of the adsorbate. A very fast adsorption of particles is observed for highly ordered adsorbate equilibrium states.

Lysozyme-dalargin self-organization at the aqueous-air and liquid-liquid interfaces

An experimental study of protein-peptide binding was performed by means of radiochemical and spectroscopic methods. Lysozyme and dalargin were chosen due to their biological and physiological importance. By means of tensiometry and radiochemical assays, it was found that dalargin possesses rather high surface activity at the aqueous-air and aqueous-p-xylene interfaces to be substituted by protein. Dalargin forms a hydrophobic complex with lysozyme in which the secondary structure of lysozyme is preserved. When lysozyme forms a mixed adsorption layer with dalargin at the aqueous-air surface, the peptide prevents protein from concentrating in the subsurface monolayer. In the presence of p-xylene protein in the interface, reorganization occurs quickly, so there is no lag in the interfacial tension time dependence. The interfacial tension in this case is controlled by protein and/or protein-peptide complexes. An increase in the enzymatic activity of lysozyme in the presence of dalargin was confirmed by a docking model that suggests the formation of hydrogen bonds between dalargin and amino acid residues in the active site.

l-Arginine and l-Lysine Alleviate Myosin from Oxidation: Their Role in Maintaining Myosin's Emulsifying Properties

This study investigated the alleviative effects of l-arginine and l-lysine on the emulsifying properties and structural changes of myosin under hydroxyl radical (·OH) stress. The results showed that ·OH decreased the emulsifying activity index and emulsifying stability index but increased the creaming index and droplet size of a soybean oil-myosin emulsion (SOME). Confocal laser scanning microscopy demonstrated that ·OH caused larger and more inhomogeneous SOME droplets. l-Arginine and l-lysine effectively alleviated ·OH-induced destructive effects on the emulsifying properties of myosin. In addition, ·OH increased the extent of protein carbonylation and dityrosine formation, surface hydrophobicity, and β-sheet content, but decreased the tryptophan fluorescence intensity, solubility, total sulfhydryl, and α-helix content of myosin. Although l-lysine increased dityrosine fluorescence intensity, l-arginine and l-lysine effectively alleviated the aforementioned structural changes of myosin. Therefore, l-arginine and l-lysine could mitigate ·OH-induced structural changes of myosin, which enabled myosin to maintain its emulsifying capacity under oxidative stress.

Effect of Arthrospira platensis microalgae protein purification on emulsification mechanism and efficiency

In light of environmental concerns and changing consumer demands, efforts are increasing to replace frequently used animal-based emulsifiers. We demonstrate the interfacial network formation and emulsifying potential of Arthrospira platensis protein extracts and hypothesize a mechanistic change upon progressing purification. A microalgae suspension of A. platensis powder in phosphate buffer solution (pH 7, 0.1 M) was homogenized and insoluble components separated by centrifugation. Proteins were precipitated at the identified isoelectric point at pH 3.5 and diafiltrated. In interfacial shear rheology measurements, the build-up of an interfacial viscoelastic network was faster and final network strength increased with the degree of purification. It is suggested that isolated A. platensis proteins rapidly form an interconnected protein layer while coextracted surfactants impede protein adsorption for crude and soluble extracts. Emulsions with 20 vol % medium chain triglycerides (MCT) oil could be formed with all extracts of different degrees of purification. Normalized by protein concentration, smaller droplets could be stabilized with the isolated fractions. For potential applications in food, pharma and cosmetic product categories, the enhanced functionality has to be balanced against the loss in biomass while purifying microalgae proteins or other alternative single cell proteins.

Interfacial dilatational and emulsifying properties of ultrasound-treated pea protein

In this study, the structural, interfacial, and emulsifying properties of high-intensity ultrasound (HUS)-treated pea protein isolate (PPI_US) were investigated. HUS at 50% amplitude and 57-60 W·cm^-2 for 5 min markedly improved protein solubility (by 132%), surface hydrophobicity (by 173%), and reduced particle size (by 52%). These physicochemical changes in PPI_US led to more rapid protein adsorption at the oil-water interface, improved emulsifying activity (by 18-27%) and capacity (by 11%), and enhanced emulsion physical stability. The multilayer nature, albeit less elastic, of the interfacial membrane formed by PPI_US when compared to control protein (PPI_C), based on dilatational testing, contributed to the above results. Moreover, PPI_US-stabilized emulsions exhibited a tendency of being less susceptible to lipid oxidation during storage. Thus, structure-modifying HUS may be a valuable processing technology for the manufacture of pea protein-based emulsion foods.

Salting Up and Salting Down of Bovine Serum Albumin Layers at the Air-Water Interface

The surface adsorption of bovine serum albumin in pure water and salted aqueous solutions was studied by neutron reflection. With the contrast match technique, the surface excess in null reflecting water as a function of the protein concentration was revealed. It is found that, in a concentration range from 1 ppm (parts per million, mg/L) to 1000 ppm, without salts, the surface excess shows a profound peak at around 20 ppm; with salts, the surface excess increases steadily with the protein concentration. When the surface excess at a specific protein concentration is viewed, the introduction of sodium chloride causes either a salting down effect (surface adsorption decline) or a salting up effect (surface adsorption increase), depending upon the protein concentration. The salting up effect is observed at the low (∼1 ppm) and high (∼1000 ppm) concentrations, and the salting down effect dominates the intermediate concentration range. The change in solution pH relative to the isoelectric point (PI) can act as a simple indicator for the salting up or salting down behavior. When the solution pH is shifted toward the PI by adding salts, surface adsorption enhances; when the solution pH is shifted away from the PI by adding salts, surface adsorption declines.

Orientation and Conformation of Proteins at the Air-Water Interface Determined from Integrative Molecular Dynamics Simulations and Sum Frequency Generation Spectroscopy

Understanding the assembly of proteins at the air-water interface (AWI) informs the formation of protein films, emulsion properties, and protein aggregation. Determination of protein conformation and orientation at an interface is difficult to resolve with a single experimental or simulation technique alone. To date, the interfacial structure of even one of the most widely studied proteins, lysozyme, at the AWI remains unresolved. In this study, molecular dynamics (MD) simulations are used to determine if the protein adopts a side-on, head-on, or axial orientation at the AWI with two different forcefields, GROMOS-53a6 + SPC/E and a99SB-disp + TIP4P-D. Vibrational sum frequency generation (SFG) spectroscopy experiments and spectral SFG calculations validate consistency between the structure determined from MD and experiments. Overall, we show with strong agreement that lysozyme adopts an axial conformation at pH 7. Further, we provide molecular-level insight as to how pH influences the binding domains of lysozyme resulting in side-on adsorption near the isoelectric point of the lysozyme.

Behavior of plant-dairy protein blends at air-water and oil-water interfaces

Recent work suggests that using blends of dairy and plant proteins could be a promising way to mitigate sustainability and functionality concerns. Many proteins form viscoelastic layers at fluid interfaces and provide physical stabilization to emulsion droplets; yet, the interfacial behavior of animal-plant protein blends is greatly underexplored. In the present work, we considered pea protein isolate (PPI) as a model legume protein, which was blended with well-studied dairy proteins (whey protein isolate (WPI) or sodium caseinate (SC)). We performed dilatational rheology at the air-water and oil-water interface using an automated drop tensiometer to chart the behavior and structure of the interfacial films, and to highlight differences between films made with either blends, or their constituting components only. The rheological response of the blend-stabilized interfaces deviated from what could be expected from averaging those of the individual proteins and depended on the proteins used; e.g. at the air-water interface, the response of the caseinate-pea protein blend was similar to that of PPI only. At the oil-water interface, the PPI and WPI-PPI interfaces gave comparable responses upon deformation and formed less elastic layers compared to the WPI-stabilized interface. Blending SC with PPI gave stronger interfacial layers compared to SC alone, but the layers were less stiff compared to the layers formed with WPI, PPI and WPI-PPI. In general, higher elastic moduli and more rigid interfacial layers were formed at the air-water interface, compared to the oil-water interface, except for PPI.