Interaction between colloids in solutions containing dissolved polymer

Depletion Interactions between Nanoparticles: The Effect of the Polymeric Depletant Stiffness

A Density Functional Theory is employed to study depletion interactions between nanoparticles mediated by semiflexible polymers. The four key parameters are the chain contour length and the persistence length of the polymeric depletant, its radius of gyration, and the nanoparticle radius. In the Density Functional Theory calculation of the depletion interaction between the nanoparticles mediated by semiflexible polymers, the polymer gyration radius is kept constant by varying the contour length and the persistence length simultaneously. This makes it possible to study the effect of the chain stiffness on the depletion potential of mean force between the nanoparticles for a given depletant size. It is found that the depletion attraction becomes stronger for stiffer polymer chains and larger colloids. The depletion potential of mean force is used as input to compute the phase diagram for an effective one-component colloidal system.

Photo-oxidative degradation of polyacids derived ceria nanoparticle modulation for chemical mechanical polishing

The effects of photo-oxidative degradation of polyacids at various concentrations and with different durations of ultraviolet (UV) irradiation on the photo-reduction of ceria nanoparticles were investigated. The effect of UV-treated ceria on the performance of chemical mechanical polishing (CMP) for the dielectric layer was also evaluated. When the polyacids were exposed to UV light, they underwent photo-oxidation with consumption of the dissolved oxygen in slurry. UV-treated ceria particles formed oxygen vacancies by absorbing photon energy, resulting in increased Ce³⁺ ions concentration on the surface, and when the oxygen level of the solution was lowered by the photo-oxidation of polymers, the formation of Ce³⁺ ions was promoted from 14.2 to 36.5%. Furthermore, chain scissions of polymers occurred during the oxidation process, and polyacids with lower molecular weights were found to be effective in ceria particle dispersion in terms of the decrease in the mean diameter and size distribution maintaining under 0.1 of polydispersity index. With increasing polyacid concentration and UV irradiation time, the Ce³⁺ concentration and the dispersity of ceria both increased due to the photo-oxidative degradation of the polymer; this enhanced the CMP performance in terms of 87% improved material removal rate and 48% lowered wafer surface roughness.

Investigation of Ring and Star Polymers in Confined Geometries: Theory and Simulations

The calculations of the dimensionless layer monomer density profiles for a dilute solution of phantom ideal ring polymer chains and star polymers with f=4 arms in a Θ-solvent confined in a slit geometry of two parallel walls with repulsive surfaces and for the mixed case of one repulsive and the other inert surface were performed. Furthermore, taking into account the Derjaguin approximation, the dimensionless layer monomer density profiles for phantom ideal ring polymer chains and star polymers immersed in a solution of big colloidal particles with different adsorbing or repelling properties with respect to polymers were calculated. The density-force relation for the above-mentioned cases was analyzed, and the universal amplitude ratio B was obtained. Taking into account the small sphere expansion allowed obtaining the monomer density profiles for a dilute solution of phantom ideal ring polymers immersed in a solution of small spherical particles, or nano-particles of finite size, which are much smaller than the polymer size and the other characteristic mesoscopic length of the system. We performed molecular dynamics simulations of a dilute solution of linear, ring, and star-shaped polymers with N=300, 300 (360), and 1201 (4 × 300 + 1-star polymer with four arms) beads accordingly. The obtained analytical and numerical results for phantom ring and star polymers are compared with the results for linear polymer chains in confined geometries.

Combining Diffusion NMR and Small-Angle Neutron Scattering Enables Precise Measurements of Polymer Chain Compression in a Crowded Environment

The effect of particles on the behavior of polymers in solution is important in a number of important phenomena such as the effect of "crowding" proteins in cells, colloid-polymer mixtures, and nanoparticle "fillers" in polymer solutions and melts. In this Letter, we study the effect of spherical inert nanoparticles (which we refer to as "crowders") on the diffusion coefficient and radius of gyration of polymers in solution using pulsed-field-gradient NMR and small-angle neutron scattering (SANS), respectively. The diffusion coefficients exhibit a plateau below a characteristic polymer concentration, which we identify as the overlap threshold concentration c^{⋆}. Above c^{⋆}, in a crossover region between the dilute and semidilute regimes, the (long-time) self-diffusion coefficients are found, universally, to decrease exponentially with polymer concentration at all crowder packing fractions, consistent with a structural basis for the long-time dynamics. The radius of gyration obtained from SANS in the crossover regime changes linearly with an increase in polymer concentration, and must be extrapolated to c^{⋆} in order to obtain the radius of gyration of an individual polymer chain. When the polymer radius of gyration and crowder size are comparable, the polymer size is very weakly affected by the presence of crowders, consistent with recent computer simulations. There is significant chain compression, however, when the crowder size is much smaller than the polymer radius gyration.

Entropic depletion in colloidal suspensions and polymer liquids: role of nanoparticle surface topography

We employ a hybrid Monte Carlo plus integral equation theory approach to study how dense fluids of small nanoparticles or polymer chains mediate entropic depletion interactions between topographically rough particles where all interaction potentials are hard core repulsion. The corrugated particle surfaces are composed of densely packed beads which present variable degrees of controlled topographic roughness and free volume associated with their geometric crevices. This pure entropy problem is characterized by competing ideal translational and (favorable and unfavorable) excess entropic contributions. Surface roughness generically reduces particle depletion aggregation relative to the smooth hard sphere case. However, the competition between ideal and excess packing entropy effects in the bulk, near the particle surface and in the crevices, results in a non-monotonic variation of the particle-monomer packing correlation function as a function of the two dimensionless length scale ratios that quantify the effective surface roughness. As a result, the inter-particle potential of mean force (PMF), second virial coefficient, and spinodal miscibility volume fraction vary non-monotonically with the surface bead to monomer diameter and particle core to surface bead diameter ratios. A miscibility window is predicted corresponding to an optimum degree of surface roughness that completely destroys depletion attraction resulting in a repulsive PMF. Variation of the (dense) matrix packing fraction can enhance or suppress particle miscibility depending upon the amount of surface roughness. Connecting the monomers into polymer chains destabilizes the system via enhanced contact depletion attraction, but the non-monotonic variations with surface roughness metrics persist.

The application of the integral equation theory to study the hydrophobic interaction

The Wertheim's integral equation theory was tested against newly obtained Monte Carlo computer simulations to describe the potential of mean force between two hydrophobic particles. An excellent agreement was obtained between the theoretical and simulation results. Further, the Wertheim's integral equation theory with polymer Percus-Yevick closure qualitatively correctly (with respect to the experimental data) describes the solvation structure under conditions where the simulation results are difficult to obtain with good enough accuracy.

Role of the electrostatic depletion attraction on the structure of charged liposome-polymer mixtures

The effect of adding charged nonadsorbing polymers to electrostatically structured suspensions of charged liposomes has been experimentally studied by means of light scattering techniques. The static structure factor of the mixtures is analyzed using two polymers of different sizes. As the polymer concentration increases, the main peak of the structure factor decreases and shows an important shift to larger values of the scattering vector. Such displacement is the consequence of the electrostatic-enhanced depletion attraction induced by the polymers that counteracts the electrostatic repulsion. For the shorter polymer, the system remains stable for all studied polymer concentrations. However, for the long polymer chains, the effective attraction induced at the highest polymer density studied is strong enough to destabilize the mixture. In this case, the aggregation of the liposomes leads to clusters of nearly linear morphology. The PRISM theory is employed to calculate the effective pair potential between liposomes. The theoretical predictions are able to support the experimental observations, and provide an explanation of the interplay between the electrostatic repulsive interaction and the depletion attraction. In particular, they show that the depletion attraction is especially long ranged, and is dominated by electrostatic effects rather than entropic.

Effect of polymer size and chain length on depletion interactions between two colloids

A density functional theory based on the weighted density has been developed to investigate the depletion interactions between two colloids immersed in a bath of the binary polymer mixtures, where the colloids are modeled as hard spheres and the polymers as freely jointed tangent hard-sphere chain mixtures. The theoretical calculations for the depletion forces between two colloids induced by the polymer are in good agreement with the computer simulations. The effects of polymer packing fraction, degree of polymerization, polymer/polymer size ratio, colloid/polymer size ratio on the depletion interactions, and colloid-colloid second virial coefficient B2 due to polymer-mediated interactions have been studied. With increasing the polymer packing fraction, the depletion interaction becomes more long ranged and the attractive interaction near the colloid becomes deeper. The effect of degree polymerization shows that the long chain gives a more stable dispersion for colloids rather than the short chain. The strong effective colloid-colloid attraction appears for the large colloid/polymer and polymer/polymer size ratio. The location of maximum repulsion Rmax is found to appear Rmax approximately sigmac+Rg2 for the low polymer packing fraction and this is shifted to smaller separation Rmax approximately sigmac+sigmap2 with increasing the polymer packing fraction, where sigmap2 and Rg2 are the small-particle diameter and the radius of gyration of the polymer with the small-particle diameter, respectively.

Potential distribution theorem for the polymer-induced depletion between colloidal particles

The authors investigated the polymer-mediated colloidal interactions in a good solvent wherein the particle size varies from that much smaller than the polymer radius of gyration up to macroscopic and the polymer concentration varies from that corresponding to a dilute solution to that close to a melt. At conditions directly accessible to molecular simulations, the theoretical predictions agree favorably with the simulation results for the distributions of polymer segments and for the polymer-mediated colloidal interactions. The theoretical methods were then exploited to examine the polymer structure and colloidal interactions when the particle/polymer size ratio changes from the "protein" limit to the "colloid" limit at different regimes of the polymer concentration (i.e., dilute, semidilute, and concentrated). The authors found that the surface curvature plays a significant role on the distribution of polymer segments near the particle surface at low polymer concentration, but this effect diminishes as the polymer concentration increases. The Derjaguin approximation works reasonably well at high polymer concentration even in the protein limit, but it may fail qualitatively at low polymer concentration where the polymer-induced colloidal force becomes long range.

Potential of mean force between two nanometer-scale particles in a polymer solution

Expanded ensemble density-of-states simulations and a connectivity altering algorithm are used to investigate the effective interactions that arise between nanoparticles suspended in polymer solutions. Our calculations with systems of long polymeric chains reveal oscillations in the effective polymer-induced interactions between the particles, even at low concentrations. The range of these interactions is considerably longer than originally anticipated, and their origin is traced back to the chain-end effects and density fluctuations that were absent in previous treatments of these systems.

Integral equation theory study on the structure and effective interactions in star polymer nanocomposite melts

The polymer reference interaction site model theory is used to investigate the radial distribution function, potential of mean force, depletion force, and second virial coefficient in star polymer nanocomposite melts. The contact aggregation of nanoparticles for relatively weak nanoparticle-monomer attraction and the bridging aggregation of nanoparticles for very large nanoparticle-monomer attraction are observed. The star architecture can well suppress the organization states of direct contact and bridging structure for the moderate nanoparticle-monomer attraction, and promote the bridging-type organization for relatively large nanoparticle-monomer attraction. At constant particle volume fraction, the arm length quantitatively affects the organization states of star polymer nanocomposite melt, and larger repulsive barriers are existent to prevent the contact aggregation of larger nanoparticles. These observations provide useful information for the development of new nanocomposite materials.

Structure, surface excess and effective interactions in polymer nanocomposite melts and concentrated solutions

The Polymer Reference Interaction Site Model (PRISM) theory is employed to investigate structure, effective forces, and thermodynamics in dense polymer-particle mixtures in the one and two particle limit. The influence of particle size, degree of polymerization, and polymer reduced density is established. In the athermal limit, the surface excess is negative implying an entropic dewetting interface. Polymer induced depletion interactions are quantified via the particle-particle pair correlation function and potential of mean force. A transition from (nearly) monotonic decaying, attractive depletion interactions to much stronger repulsive-attractive oscillatory depletion forces occurs at roughly the semidilute-concentrated solution boundary. Under melt conditions, the depletion force is extremely large and attractive at contact, but is proceeded by a high repulsive barrier. For particle diameters larger than roughly five monomer diameters, division of the force by the particle radius results in a nearly universal collapse of the depletion force for all interparticle separations. Molecular dynamics simulations have been employed to determine the depletion force for nanoparticles of a diameter five times the monomer size over a wide range of polymer densities spanning the semidilute, concentrated, and melt regimes. PRISM calculations based on the spatially nonlocal hypernetted chain closure for particle-particle direct correlations capture all the rich features found in the simulations, with quantitative errors for the amplitude of the depletion forces at the level of a factor of 2 or less. The consequences of monomer-particle attractions are briefly explored. Modification of the polymer-particle pair correlations is relatively small, but much larger effects are found for the surface excess including an energetic driven transition to a wetting polymer-particle interface. The particle-particle potential of mean force exhibits multiple qualitatively different behaviors (contact aggregation, steric stabilization, local bridging attraction) depending on the strength and spatial range of the polymer-particle attraction.

Structure and effective interactions in polymer nanocomposite melts: An integral equation theory study

The polymer reference interaction site model from integral equation theory is used to investigate the structure and effective interactions in polymer nanocomposite melts where strong nanoparticle-monomer interactions are principally considered in this work. For finite particle volume fraction, the compromise for the interference between polymers and nanoparticles results in an optimum particle volume fraction for nanoparticle dispersion in polymer melts. At constant particle volume fraction, the effects of degree of polymerization become insignificant when it reaches a threshold value, below which quantitative effects on the organization states of polymer nanocomposite melts are found and help nanoparticles to well disperse in polymer. The aggregation of large nanoparticles decreases with the increase of the nanoparticle-monomer attraction strength. These observations may provide useful information for the development of new polymer materials.

Effective interaction of charged platelets in aqueous solution: investigations of colloid laponite suspensions by static light scattering and small-angle x-ray scattering

We study dilute aqueous solutions of charged disklike mineral particles (laponite) by a combination of static light scattering (SLS) and small-angle x-ray scattering (SAXS). Laponite solutions are known to form gels above a certain critical concentration that must be described as nonequilibrium states. Here we focus on the investigation by SLS and SAXS at concentrations below gelation (c<0.016 g/L) and at low concentrations of added salt (0.001M and 0.005M). Thus, we have obtained the scattering function of single Laponite platelets as well as the structure factor describing their interaction at finite concentration. A detailed analysis of the combined sets of data proves that the solutions are in a well-defined equilibrium state. Moreover, this analysis demonstrates the internal consistency and accuracy of the scattering functions obtained at finite concentrations. We find that laponite particles interact through an effective pair potential that is attractive on short range but repulsive on longer range. This finding demonstrates that Laponite solutions exhibit only a limited stability at the concentration of added salt used herein. Raising the ionic strength to 0.005M already leads to slow flocculation as is evidenced from the enhanced scattering intensity at smallest scattering angles. All data strongly suggest that the gelation occurring at higher concentration is related to aggregation.

Interactions between nanocolloidal particles in polymer solutions: Effect of attractive interactions

We present a density-functional theory study of nanoparticle interactions in a concentrated polymer solution. The polymers are modeled as freely jointed tangent chains; all nonbonded interactions between polymer segments and nanoparticles are described by Lennard-Jones potentials. We test several recently proposed methods of treating attractive interactions within the density-functional theory framework by comparing theoretical results with recent simulation data. We find that the simple van der Waals approach provides the most accurate results for the polymer-mediated potential of mean force between two dilute nanoparticles. We employ this approach to study nanoparticle interactions as a function of nanoparticle-segment interaction strength and polymer solution density and temperature.

Interactions between colloidal particles in polymer solutions: A density functional theory study

We present a density functional theory study of colloidal interactions in a concentrated polymer solution. The colloids are modeled as hard spheres and polymers are modeled as freely jointed tangent hard sphere chains. Our theoretical results for the polymer-mediated mean force between two dilute colloids are compared with recent simulation data for this model. Theory is shown to be in good agreement with simulation. We compute the colloid-colloid potential of mean force and the second virial coefficient, and analyze the behavior of these quantities as a function of the polymer solution density, the polymer chain length, and the colloid/polymer bead size ratio.

Polymer–particle mixtures: Depletion and packing effects

The structure of polymers in the vicinity of spherical colloids is investigated by Monte Carlo simulations and integral equation theory. Polymers are represented by a simple bead-spring model; only repulsive Lennard-Jones interactions are taken into account. Using advanced trial moves that alter chain connectivity, depletion and packing effects are analyzed as a function of chain length and density, both at the bond and the chain level. Chain ends segregate to the colloidal surface and polymer bonds orient parallel to it. In the dilute regime, the polymer chain length governs the range of depletion and has a negligible influence on monomer packing in dense polymer melts. Polymers adopt an ellipsoidal shape, with the larger axis parallel to the surface of the particle, as they approach larger colloids. The dimensions are perturbed within the range of the depletion layer.

Prediction and Measurement of the Interparticle Depletion Interaction Next to a Flat Wall

A theoretical and experimental study was performed to investigate the depletion interaction between two colloidal particles next to a solid wall in a solution of nonadsorbing macromolecules. By calculating the change in free volume available to the macromolecules upon approach of the two particles, a relatively simple expression was developed for the interparticle depletion attraction in hard sphere systems as a function of the particle-particle and particle-plate spacing. Perhaps the most useful result obtained from this analysis was that the wall has no effect whenever the ratio of the particle radius to the macromolecule radius is greater than four. (In charged systems, this ratio would apply to the effective particle and macromolecule sizes.) A series of experiments was then performed in which the hydrodynamic force balance (HFB) apparatus was used to measure the shear force needed to separate a colloidal doublet consisting of two particles trapped in a secondary energy well formed by a repulsive electrostatic force and an attractive depletion force. The macromolecules used here were small, nanometer-sized spheres of either silica or polystyrene. Agreement between the measured separation forces and those predicted using the force balance model of J. Y. Walz and A. Sharma (J. Colloid Interface Sci. 168, 485 (1994)) was within a factor of 1.3 using no adjustable parameters and accounting for polydispersity and uncertainty in the macromolecule size. It is shown that this remaining discrepancy could be caused by the Brownian (stochastic) nature of the doublet breakup process.

Polymer depletion effects near mesoscopic particles

The behavior of mesoscopic particles dissolved in a dilute solution of long, flexible, and nonadsorbing polymer chains is studied by field-theoretic methods. For spherical and cylindrical particles the solvation free energy for immersing a single particle in the solution is calculated explicitly. Important features are qualitatively different for self-avoiding polymer chains as compared with ideal chains. The results corroborate the validity of the Helfrich-type curvature expansion for general particle shapes and allow for quantitative experimental tests. For the effective interactions between a small sphere and a wall, between a thin rod and a wall, and between two small spheres, quantitative results are presented. A systematic approach for studying effective many-body interactions is provided. The common Asakura-Oosawa approximation modeling the polymer coils as hard spheres turns out to fail completely for small particles and still fails by about 10% for large particles.

Interaction between Colloids in Network Forming Solution

The effective interaction between colloids in a solvent of hard spheres, which can polymerize with the formation of cross-like molecular clusters, is studied on the basis of the solution of the associative Percus-Yevick/Ornstein-Zernike equation for spatial correlations in an infinitely dilute solution. It is found that at low solvent density and low temperature, the effective intermolecular potential between the colloidal particles is attractive, thus facilitating a phase separation or precipitation of the colloids. A depletion of the local solvent density around the colloidal particle is observed. If the solvent consists of extended associative complexes, compared with hard spheres, the correlation between the colloid particles are of longer range and barrier for flocculation shifts to the larger separations. The effect of size ratio of the colloid spheres and of solvent on the potential of mean force is also discussed. Copyright 1998 Academic Press.