Adsorptive Stripping Voltammetric Behaviour of Folic Acid

Electrochemical determination of folic acid: A short review

Folic acid (FA) is an electroactive compound of biological origin. It helps our body to produce and maintain healthy cells. It can significantly reduce the occurrence of neural tube defects and also prevents change in DNA structure. FA deficiency can lead to various health risks. Therefore, a sensitive, specific, and reproducible way of FA detection is essential. A number of analytical methods are in practice for the quantification of FA. However, electroanalytical methods are attracting much attention because of their advantage over conventional methods, as they are fast, simple, sensitive, and cost effective. Moreover, modification of electrodes offers control over size and morphology which allows miniaturization for applicability in portable electrochemical devices.

Kinetic spectrophotometric method as a new strategy for the determination of vitamin B9 in pharmaceutical and biological samples

In this study, a new method is proposed for the determination of trace amounts of folic acid (vitamin B(9)). This method is based on the inhibitory effect of folic acid on the reaction of Thionine and bromate in sulfuric acid media. The reaction can be monitored spectrophotometrically by measuring the decrease in absorbance at 601 nm (λ(max)). The effective variables on the reaction rate were investigated. Under optimum experimental conditions, the method allows to determine of the folic acid in a wide linear range with two linear segments. The limit of detection was 0.36 μg mL(-1) of folic acid. Relative standard deviations of six replicate determinations of 5.0 and 50.0 μg mL(-1) of folic acid were 1.18 and 1.02%, respectively. The interfering effect of the different species was also investigated. The method was evaluated by quantifying of folic acid in biological and pharmaceutical samples with satisfactory assay results.

Selective electrochemical sensor for folic acid at physiological pH using ultrathin electropolymerized film of functionalized thiadiazole modified glassy carbon electrode

This paper demonstrated the selective determination of folic acid (FA) in the presence of important physiological interferents, ascorbic acid (AA) and uric acid (UA) at physiological pH using electropolymerized film of 5-amino-2-mercapto-1,3,4-thiadiazole (p-AMT) modified glassy carbon (GC) electrode. Bare GC electrode fails to determine the concentration of FA in the presence of AA and UA due to the surface fouling caused by the oxidized products of AA and FA. However, the p-AMT film modified electrode not only separates the voltammetric signals of AA, UA and FA with potential differences of 170 and 410 mV between AA-UA and UA-FA, respectively but also shows higher oxidation current for these analytes. The p-AMT film modified electrode displays an excellent selectivity towards the determination of FA even in the presence of 200-fold AA and 100-fold UA. Using amperometric method, we achieved the lowest detection of 75 nM UA and 100 nM each AA and FA. The amperometric current response was increased linearly with increasing FA concentration in the range of 1.0 x 10(-7)-8.0 x 10(-4)M and the detection limit was found to be 2.3 x 10(-10)M (S/N=3). The practical application of the present modified electrode was successfully demonstrated by determining the concentration of FA in human blood serum samples.

Chemiluminescence flow sensor for folic acid with immobilized reagents

A novel chemiluminescence (CL) sensor for folic acid combined flow-injection (FI) technology was presented in this paper. The analytical reagents involved in the CL reaction, including luminol and hexacyanoferrate(III), were both immobilized on an anion-exchange column in FI system. The CL signal produced by the reaction between luminol and hexacyanoferrate(III), which were eluted from the column through sodium phosphate injection, was decreased in the presence of folic acid. The CL emission was correlated with the folic acid concentration in the range from 0.01 to 15 microg ml(-1), and the detection limit was 3.5 ng ml(-1) folic acid (3sigma). At a flow rate of 2.0 ml min(-1), including sampling and washing, could be performed in 2 min with a relative standard deviation of < 2.5%. The flow sensor could be reused more than 300 times and has been applied to the analysis of folic acid in pharmaceutical preparations. and the recovery was from 97.4% to 100.4%.

Phase-selective AC adsorptive stripping voltammetric assay for aminopterin and 10-Edam in human serum

Aminopterin was studied as a model compound for its analogues which maintain the pteridine ring in their structure. Its adsorptive behaviour on mercury was studied and the DC adsorptive stripping and phase-selective AC adsorptive stripping conditions were optimized. 10-Edam, an aminopterin analogue, was studied and shown to behave similarly to aminopterin. Phase-selective AC voltammetry provided the best signal and gave a detection limit of 4 x 10(-12) M aminopterin in aqueous solution employing an accumulation time of 10 min. The optimized method was applied to the analysis of both aminopterin and 10-Edam respectively in human serum. After extraction with a C18 reversed-phase cartridge the detection limit of the method was 1 x 10(-8) M aminopterin and the overall assay percentage recovery was 73.5% (n = 5) at a concentration of 5 x 10(-7) M aminopterin in serum. The analysis of 10-Edam at the same concentration in serum yielded the higher percentage recovery of 94.46% (n = 5) following the same procedure.

Adsorptive stripping voltammetric analysis of some pterines in human urine

The combined content of biopterin and he separate folic acid content of human urine have been quantitated by phase-selective alternating-current stripping voltammetry at the static mercury drop electrode. The use of disposable C18 cartridge allowed the samples to be separated into two fractions, one containing biopterin and neopterin and the other folic acid. The average concentration of biopterin and neopterin together was 704 ng ml-1; precision, 6.6% (RSD, n=7); mean recovery, 96%. The average concentration of folic acid was 836 ng ml-1; precision, 8.2% (RSD, n=8); mean recovery, 91%.

Adsorptive stripping voltammetry applied to drug analysis: a powerful tool

A brief review of the principles and instrumentation of adsorptive stripping voltammetry is presented and the advantages of the method are described. As for many highly sensitive techniques applied to the analysis of complex media, severe interferences may occur. Different approaches can be used to circumvent these problems, exemplified by several applications in biological fluids. The application of modified electrodes to enhance selectivity is discussed.

Adsorptive stripping voltammetric assay of folic acid in human serum

Folic acid was voltammetrically measured after preconcentration by adsorption at the static mercury drop electrode. Phase selective AC voltammetry provided the most sensitive stripping signal. After previous analyte extraction, using liquid-solid extraction with a C-18 reversed phase cartridge, the method was suitable for folic acid measurement in human serum. The detection limit was 5.9 x 10(-9) M with an overall precision of 9.9% (R.S.D.; n = 7) at the concentration level of 1.0 x 10(-7) M with a mean recovery of 57%.